can someone please help no.1,2,3
Answer:
12345678910i don't know
Why metals have thermoconductivity higher than ceramic?
Answer:
Thermal Conductivity Easily Transmits Heat Among Fine Ceramics
Look at the simple machine shown below to determine the mechanical advantage
Answer:
A
Explanation:
A solar collector for a hot water system absorbs solar radiation at the rate of 660 W/m^2
. Its collecting area is 3.8m^2 . Cold water at 15degrees enters the collector. What volume of
water per minute at an output temperature of 60 degrees can this collector deliver?
This question involves the concepts of the law of conservation of energy and specific heat capacity.
This collector can deliver "7.96 x 10⁻⁴ m³/min" of water at an output temperature of 60°C.
According to the law of conservation of energy:
Solar Energy = Energy Required to raise the temperature of the water
Solar Power = Energy Required to raise the temperature of the water
[tex]IA=\frac{mC\Delta T}{t}\\\\\frac{m}{t}=\frac{IA}{C\Delta}[/tex]
where,
[tex]\frac{m}{t}[/tex] = mass flow rate = ?
I = solar radiation = 660 W/m²
A = Area = 3.8 m²
ΔT = change in temperature = 60°C - 15°C = 45°C
C = specific heat capacity = 4200 J/kg.°C
Therefore,
[tex]\frac{m}{t}=\frac{(660\ W/m^2)(3.8\ m^2)}{(4200\ J/kg.^oC)(45^oC)}\\\\\frac{m}{t}=(0.0133\ kg/s)(\frac{60\ s}{1\ min})\\\\\frac{m}{t}=0.796\ kg/min[/tex]
Now, the volume flow rate will be:
[tex]\frac{V}{t}=\frac{(\frac{m}{t})}{(density\ of\ water)}=\frac{(0.796\ kg/min)}{(1000\ kg/m^3)}\\\\\frac{V}{t}=7.96\ x\ 10^{-4}\ m^3/min[/tex]
Learn more about the law of conservation of energy here:
brainly.com/question/20971995?referrer=searchResults
The attached picture explains the law of conservation of energy.
What happens when the object is placed at F? Explain
your answer.
Answer:
Sample Response: No image will be formed because the rays will not converge to or diverge from a common point.
Explanation:
A tennis player strikes the tennis ball with an initial velocity of 44.7 m/s horizontally. The ball is initially 1.28 m above the ground and 12.9 m from the 0.914 m tall net. Does the tennis ball make it over the net?
Hi there!
We can begin by finding the total time taken for the ball to reach the net using the equation:
dₓ = vₓt
12.9 = 44.7t
12.9/44.7 = t = 0.289 s
Now, we can use the following equation to solve for displacement in the Y direction:
d = y₀ + vit + 1/2at²
There is no initial vertical velocity, so:
d = y₀ + 1/2at²
Plug in known values:
d = 1.28 + 1/2(-9.8)(0.289²)
d = 0.87m
Thus, since 0.87 m < 0.914 m, the tennis ball does NOT make it over the net.
what is photosynthesis
: [tex] \implies[/tex] The Photosynthesis is the process of capturing light energy and transforming it into chemical energy. Green plants and several other organisms use light energy and convert carbon dioxide and water into glucose. In this process, oxygen is produced as a by-product
→ We also who how it's process occur
In plants and blue-green algae, the photosynthesis process takes place in chloroplasts. The chloroplast is present in all green parts of a plant – the leaves, green stems, sepals, and even in the flowers, in the form of green colour plastids. The chloroplast is found only in plant cells and is essential for photosynthesis reaction.Photosynthesis Equation
Carbon dioxide and water are the two major factors involved in the photosynthesis reaction. It’s an endothermic reaction, and the products resulting from it are oxygen and glucose. The formula is:6CO2 + 6H2O = C6H12O6 + 6O2
However, some bacteria don’t produce oxygen as a by-product of photosynthesis. They are called anoxygenic photosynthetic bacteria, and those who do it are called oxygenic photosynthetic bacteria.Importance of Photosynthesis
The photosynthesis process is very important for the survival of living beings, and to continue the food chain. It also produces oxygen, which is required for breathing.Photosynthetic Pigments
Four types of photosynthetic pigments are present in the leaves of the plants. They are: Chlorophyll a chlorophyll b xanthophylls CarotenoidsThe Factors Affecting Photosynthesis
Various factors influence/affect the photosynthesis process. These are:
Light Intensity: More the light, the more will be the rate of photosynthesis. Similarly, low light will lead to a low rate of photosynthesis.The Concentration of CO2: A higher CO2 concentration rate in a plant also accelerates the photosynthesis process. The required amount of CO2 is 300-400 PPM.Temperature: If the temperature is between the range of 25 to 35 degrees Celsius, the photosynthesis takes place effectively.Water: An essential amount of water is required for stomatal opening, and it’s a key factor in the process of photosynthesis.Pollution: The increasing rate of polluting particles in the atmosphere block the pores of somatic cells, and the intake of carbon dioxide becomes difficult.▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hope it's helps !!
why does air pressure decrease with increasing altitude?
A stomp rocket takes 3.1 seconds to reach its maximum height.
- What is its initial velocity? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)
- What is its maximum height? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)
Answer:
Explanation:
Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.
v = at
v = 9.8(3.1)
v = 30.38
v = 30 m/s
max height can be found knowing the velocity is zero at the top of its flight.
v² = u² + 2as
s = (v² - u²) / 2a
s = (0.00² - 30.38²) / (2(-9.8))
s = 47.089
s = 47 m
A stomp rocket takes 3.1 seconds to reach its maximum height then the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.
What is Velocity?Velocity is defined as rate of change of position with respect to time.
SI unit of velocity is m/sec. Velocity is a vector quantity.
Given that in the question time taken by rocket to reach maximum height is 3.1 sec. Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.
v = at
v = 9.8(3.1)
v = 30.38
v = 30 m/s
Max height can be found knowing the velocity is zero at the top of its flight.
v² = u² + 2as
s = (v² - u²) / 2a
s = (0.00² - 30.38²) / (2(-9.8))
s = 47.089
s = 47 m
So, the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.
To learn more about Velocity refer to the link:
brainly.com/question/18084516
#SPJ5
Which is the most famous book of the philosopher Alexis karpouzos? I think it is the ''Cosmology, philosophy and physics''.
Answer: Yes, the " Cosmology, philosophy and physics" is the most famous book of the philosopher, Alexis karpouzos. But and the other books are important. For example, the " The self-criticism of science", the "Universal conscilusness" and the "Non-duality".
Explanation:
A 2.0 kg particle moving along the z-axis experiences the
force shown in (Figure 1). The particle's velocity is
3.0 m/s at x = 0 m.
A) At what point on the x axis does the particle have a turning point?
At point x = 0, the particle accelerates. Since there will be change of velocity at that point. The the force of the particle will change from negative sign to positive sign according to the given figure, we can therefore conclude that the particle will have a turning point at point x = 0.
Given that a 2.0 kg particle moving along the z-axis experiences the force shown in a given figure.
Force is the product of mass and acceleration. While acceleration is the rate of change of velocity. Both the force and acceleration are vector quantities. They have both magnitude and direction.
If the particle's velocity is 3.0 m/s at x = 0 m, that mean that the particle experience change of velocity at point x = 0. Since the the force of the particle will change from negative sign to positive sign according to the given figure, we can therefore conclude that the particle will have a turning point at point x = 0.
Learn more here: https://brainly.com/question/20366032
A ball is thrown up into the air. When it gets to the very top,
what kind of energy does it have?
At the highest attitude, the velocity of the ball is 0 m/s, so the kinetic energy is 0 as well.
Hence the answer is potential energy because it doesn't depend on velocity .
An object moving at a constant velocity of 5.4 m/s travels for 12 s. How far will it move during that time?
Free-fall Acceleration is -10 m/s^2
Answer:
we know that
s=vt
given
v=5.4 m/s
t=12 s
s=5.4 m/s*12 s=64.8m
Explanation:
Hope this helps:)
If you drop your keys from the tallest building in San Antonio, how fast will
they be falling after 3 seconds?
9.8 m/s
0 14,7 m/s
29.4 m/s
44,1 m/s
Hi there!
We can use the equation:
v = at, where in this instance:
v = velocity (m/s)
a = acceleration due to gravity (m/s²)
t = time (s)
g ≈ 9.8 m/s², so:
v = 9.8(3) = 29.4 m/s
Two airplanes taxi as they approach the terminal. Plane 1 taxies with a speed of 13 m/s due north. Plane 2 taxies with a speed of 8.5 m/s in a direction 20 ∘ north of west.
Part A
What is the magnitude of the velocity of plane 1 relative to plane 2?
Part B
What is the direction of the velocity of plane 1 relative to plane 2?
Part C
What are the magnitude of the velocity of plane 2 relative to plane 1?
Answer:
Explanation:
Plane 2 is moving north at
8.5sin20 = 2.9 m/s
Plane 2 is moving west at
8.5cos20 = 8.0 m/s
Part A
v = √((13 - 2.9)² + 8.0²) = 12.876... 13 m/s
Part B
θ = arctan((13 - 2.9) / 8.0) = 51.617... 52° N of E
Part C
13 m/s 52° S of W
relative velocity magnitude is independent of reference frame
Suppose you lift a 17 kg k g box by a height of 1.0 m m . How much work do you do in lifting the box
Answer:
17 J
Explanation:
work done= force X distance moved
A 1.1 kg ball drops vertically onto a floor, hitting with a speed of 23 m/s. It rebounds with an initial speed of 5.0 m/s. (a) What impulse acts on the ball during the contact
Hi there!
We know that:
I = Δp = m(vf - vi)
Plug in the given values. Remember to take into account direction ⇒ let the rebound velocity be positive and initial be negative.
I = 1.1(5 - (-23)) = 30.8 Ns
please paraphrase this paragraph
As a conclusion we first learned what is Discrete Fourier Transform and
why is it very important in signal processing science as it helps us to convert the discrete signal from time domain into frequency domain and the inverse DFT does the opposite converting the signal from frequency domain back into time domain. We have also learned the difference between DFT and the FFT algorithm where the FFT is an efficient
algorithm created to simplify the DFT process as it is faster and more accurate. We also learned how to perform and implement this algorithm using Matlab,
Answer:
The importance of signal processing science as has been made clear. Since we now know that it help to convert discrete signal from time domain to frequency domain. Moreover, we are now aware of the difference in DF5 and FFT algorithms as well as the implementation in Matlab.
An empty cylindrical barrel is open at one end and rolls without slipping straight down a hill. The barrel has a mass of 15.0 kg, a radius of 0.400 m, and a length of 0.800 m. The mass of the end of the barrel equals a fourth of the mass of its side, and the thickness of the barrel is negligible. The acceleration due to gravity is =9.80 m/s2.
What is the translational speed f of the barrel at the bottom of the hill if released from rest at a height of 33.0 m above the bottom?
Hi there!
We can use work and energy to solve this problem.
We know that:
Ei = Ef
Ei = Potential energy = mgh
Ef = Rotational kinetic + Translational kinetic = 1/2Iω² + 1/2mv²
The barrel is comprised of a hollow cylinder and disk-shaped bottom, so:
I (hollow cylinder) = mr²
I (disk) = 1/2mr²
Calculate the moment of inertias of each.
Since the mass on the base is one-fourth of its side:
x = mass of side
x + x/4 = 15
4x + x = 60
5x = 60
x = 12 kg
end mass = 3 kg
Solve for each moment of inertia:
Side: (12)(0.4²) = 1.92 Kgm²
Bottom: 1/2(3)(0.4²) = 0.24 Kgm²
Side + bottom = 2.16 Kgm²
We can now solve:
mgh = 1/2mv² + 1/2(2.16)v²/r²
(15)(9.8)(33) = 1/2(15)v² + 1/2(13.5)v²
4851 = 14.25v²
v = 18.45 m/s
When does your body conduct current more readily?
when it is hot
when it is dry
when it is cold
when it is wet
Answer:
When you are wet or you are sweating current passes easily.
Explanation:
wetness increases conductivity. therefore 'when it is wet'.
What state of matter is jelly?
Answer:
Hey mate.....
Explanation:
This is ur answer.....
SolidsJelly is a colloid where colloidal particles are solids which are dispersed in the liquid. Jelly is a fluid which can not be considered as a particular one kind of state. It is in the category of 'gel' which is a colloidal form.
Hope it helps!
Brainliest pls!
Follow me! ;)
a man can jump 9meteres on the moon.how high can he jump on the earth.
Answer:
You can jump 1.5 feet on Earth.
Explanation:
Because the moons gravity is weaker that earth so it would be easier to jump further on the moon.
What is the direction of the torque produced on the crankset by the 2-kg mass attached to the pedal bar
A Torque is a twisting force, or turning moment, it is a vector quantity with both magnitude and direction e.g Turning the handle of a cork-screw clockwise and then counterclockwise will advance the screw first inward and then outward By convention, counterclockwise torques are positive and clockwise torques are negative.
The direction is perpendicular to both the radius from the axis and to the force. It is conventional to choose it in the right hand rule direction along the axis of rotation.
Counterclockwise is the positive rotation direction and clockwise is the negative direction.
Learn more at:
https://brainly.com/question/18253139
Someone with a force of 900 N does not float in a freshwater pool. To prevent them from sinking, 20 N must be applied in an upward fashion. What is their volume and average density?
Explanation:
The buoyant force [tex]F_B[/tex] is defined as
[tex]F_B = \rho_wgV[/tex]
where [tex]\rho_w[/tex] is the density of the displaced fluid (freshwater), g is the acceleration due to gravity and V is the volume of the submerged object. In the case of freshwater, its density is [tex]997\:\text{kg/m}^3.[/tex] Since the buoyant force is 20 N, we can solve for the volume of the displaced fluid:
[tex]F_B = \rho_wgV \Rightarrow V = \dfrac{F_B}{\rho_wg}[/tex]
Plugging in the values, we get
[tex]V = \dfrac{20\:\text{N}}{(997\:\text{kg/m}^3)(9.8\:\text{m/s}^2)}[/tex]
[tex]\:\:\:\:\:= 2.05×10^{-3}\:\text{m}^3[/tex]
Recall that the weight of an object in terms of its density and volume is given by
[tex]W = \rho gV[/tex]
Using the value for the volume above, we can solve for the density of the object as follows:
[tex]\rho = \dfrac{W}{gV} = \dfrac{900\:\text{N}}{(9.8\:\text{m/s}^2)(2.05×10^{-3}\:\text{m}^3)}[/tex]
[tex]\:\:\:\:\:= 44,798\:\text{kg/m}^3[/tex]
PLEASE HELP!
A 9kg particle is initially at rest at x=0. It is subject to a single force Fx (N) which varies with x (m) as shown in the
diagram
F
2
1
0
ББ by
x
- 1
1
-2
The kinetic energy of the particle when it is at x = 3 m is:
Hi there!
With a Force/Displacement curve, we must take the integral (area underneath the curve) to calculate the work done.
We know that:
W = ΔKE
Calculate the work by finding the area underneath the force curve from
x = 0 to 3 m:
We can use a trapezoid:
A = 1/2(3 + 2)(3) = 7.5 J
This is the amount of work done, and since the object starts from rest:
7.5J = KEf - KEi (0 J)
7.5J = KEf = 7.5 J
The_____ scale is called an absolute temperature scale, and its zero point is called absolute zero.
Kelvin
Fahrenheit
Celsius
The Celcius Scale is called an absolute Temperature scale,and it's zero point called absolute zero
_______________
A 0,9 -kg object attached to the end of a string swings in a vertical circle (radius = 75 cm). At the top of the circle the speed of the object is 6,5 m/s. What is the magnitude of the tension in the string at this position?
14 The radius of gyration of a body about an axis &ta
distance 6 cm from its centre of mass is 10 cm.
Then, its radius of gyration about a parallel axis
through its centre of mass will be
(a) 80 cm (b) 8 cm (c) 0.8 cm (d) 0.08 cm
Correct option is B 8 cm.
Let radius of gyration for the axis not passing through center of mass be r and that for the axis passing through the center of mass be k and the distance between the two parallel axes be a.
Parallel axes theorem gives:
[tex] {mr}^{2} = m( {k}^{2} + {a}^{2} ) \\ ⇒ {r}^{2} = {k}^{2} + a {}^{2} [/tex][tex]⇒k = \sqrt{ {10}^{2} - {6}^{2} } = 8cm.[/tex]Thus, option B is the correct answer.
Swim swim swim swim swim swim swim swim swim swim swim swim.
What is a list of all the states of matter?
Answer:
3
Explanation:
state of matter are solid
liquid and
gases
Answer:
3
Explanation:
state of a matter are solid liquid and gas