Please help ASAP !!!!

Answer:

His acceleration during the first five seconds before reaching terminal velocity = (W - D)/m

Explanation:

The terminal velocity is the maximum steady velocity attained by a body falling freely with increasing velocity from rest in a fluid, such as air or water

The net force, F acting on the body falling through the fluid is given as follows;

F = Weight force, W, from gravity - Drag force, D, from the fluid

F = W - D

Given that F = Mass, m × Acceleration, a, we have;

F = m × a

The acceleration, a = F/m = (W - D)/m

His acceleration during the first five seconds before reaching terminal velocity = (W - D)/m.

Answer:

F = m*a

therefore m = F / a

m = 100 / 5 = 20 kg?

hope this helped you

Explanation:

The required mass of man, undergoing the acceleration is of 75 kg.

Given data:

The magnitude of acceleration of man is, a = 4 m/s².

The magnitude of action force on the man is, F = 300 N.

Here we can apply the Newton's second law of motion, which says that the applied force causes the acceleration of any object. Where the applied force is equal to the mass of object and the magnitude of acceleration of object.

Therefore,

F = ma

Solving as,

300 = m × 4

m = 300/4

m = 75 kg

Thus, we can conclude that the mass of man, undergoing the acceleration is of 75 kg.

Learn more about the Newton's second law here:

https://brainly.com/question/19860811

Answer:

It's A & C

Explanation:

:p

Knowing the surface tension of isopropanol in air and surface tension of water in air we can say that:

Isopropyl alcohol (IPA) at various concentration levels is considered a disinfectant (not for bacterial spores), virucide, fungicide and an effective waste removal agent widely used in cleanrooms and other contamination controlled environments.

So compare the surface tension of isopropanol and the water we can say that Isopropanol will have a flatter meniscus than water because the forces between the molecules are smaller and Isopropanol will have a lower boiling point than water because the forces between the molecules are smaller.

See more about isopropanol at brainly.com/question/22284953

#SPJ2

Answer:

Answer:

0.678m

Explanation:

Find: Δx

Δx = ½ (v + v₀) t

Δx = ½ (4.127 m/s + 2.179 m/s) (0.215 s)

Δx = 0.678 m

Answer:

Yes

Explanation:

Answer:

velocity is vector Quantity

Answer:

top to 2\

next to top

then to up one

next to up

Explanation:

Answer:

(a) La aceleración de la gravedad en esa órbita es 0.22 [tex]\frac{m}{s^{2} }[/tex]

(b) Un satélite de 1,200 kg pesará allí 264 N.

Explanation:

(a) Cada punto del espacio tiene un  valor del campo proporcional a la función, siguiendo el modelo de gravitación de Newton:

[tex]g=G*\frac{m}{r^{2} }[/tex]

donde m será masa, r  la distancia entre los objetos y G la constante de gravitación universal, cuyo valor es [tex]G=6.672*10^{-11}\frac{N*m^{2} }{kg }[/tex]

En este caso:

Reemplazando:

[tex]g=6.672*10^{-11}\frac{N*m^{2} }{kg }*\frac{6*10^{24}kg }{(42,370,000 m)^{2} }[/tex]

Resolviendo, obtenes:

g= 0.22 [tex]\frac{m}{s^{2} }[/tex]

La aceleración de la gravedad en esa órbita es 0.22 [tex]\frac{m}{s^{2} }[/tex]

(b) La ley fundamental de la dinámica o segunda ley de Newton expresa que la fuerza neta que es aplicada sobre un cuerpo es proporcional a la aceleración que adquiere en su trayectoria.  Esto se expresa matemáticamente como:

F= m*a

en donde  F es fuerza neta , m la masa y a la aceleración.

El peso es la fuerza que ejerce la gravedad sobre una masa, por lo que se obtiene de manera análoga a la fuerza:

P=m*g

En este caso la masa m tiene un valor de 1,200 kg y la gravedad g un valor de 0.22 [tex]\frac{m}{s^{2} }[/tex].

Reemplazando:

P=1,200 kg*0.22 [tex]\frac{m}{s^{2} }[/tex]

Resolviendo:

P= 264 N

Un satélite de 1,200 kg pesará allí 264 N.

Answer:

Explanation:

According to newtons second law.

F = mass * acceleration

If the doll has a mass of 0.2 kg, and the robot has a mass of 0.5 kg, the resulting mass will be 0.7kg

Force applied = 1N

acceleration = Force/mass

Substitute the values and get acceleration

acceleration = 1/0.7

acceleration = 1.43m/s²

Hence the magnitude of the acceleration of the robot is 1.43m/s²

Answer:

D

Explanation:

It does all three

Answer:

[tex]\boxed {\boxed {\sf D. \ -11 \ m/s^2}}[/tex]

Explanation:

Acceleration can be found by dividing the change in velocity by the time.

[tex]a=\frac{v_f-v_i}{t}[/tex]

where Vf is the final velocity, Vi is the initial velocity, and t is the time.

Since the car came to a complete stop, it's final velocity was 0 meters per second.

The initial velocity was 22 meters per second.

The time was 2.0 seconds.

[tex]v_f=0 \ m/s\\v_i=22 \ m/s\\t= 2.0 \ s[/tex]

Substitute the values into the formula.

[tex]a=\frac{0 \ m/s-22 \ m/s}{ 2.0 \s }[/tex]

Subtract in the numerator first.

[tex]a=\frac{-22 \ m/s}{2.0 \ s}[/tex]

Divide.

[tex]a= -11 \ m/s^2[/tex]

The acceleration of the car was -11 meters per square second. The negative acceleration indicates slowing down/stopping.

Answer:

Speed is acceleration or a high rate of motion

Answer:

the rate at which something or someone moves or operates or is able to move or operate .

Answer:

a &c

Explanation:

>3

Attraction between the molecules of a liquid and the temperature at which the liquid changes state is "Strong attractions mean the liquid boils at a higher temperature". The correct option is C

Temperature is a physical quantity which measures hotness and coldness of a body. Temperature measures the degree of vibration of molecule in a body. Temperature is measured in centigrade (°C), Fahrenheit (°F) and Kelvin (K) in which Kelvin (K) is a SI unit of temperature. Absolute scale of temperature means Kelvin scale of temperature.

relation between Kelvin(K) and centigrade (°C),

°C= K - 273.15

from equation, 273.15 K means 0 °C, which is freezing point of water (ice).

when we give temperature to the body, its molecule or atom absorbs thermal energy and vibrate about their mean position. Amplitude of vibration get increases as we go on increasing temperature and for higher temperature force of attraction between molecules gets weaker. Hence for higher temperature, due to weaken the force of attraction between molecule, solid goes into liquid state. and further increase in temperature liquid goes into gaseous state.

Liquid has stronger force of attraction than gas and weaker than solid. Strong force of attraction means high temperature should be given to break molecular bonds. Therefore Strong attractions mean the liquid boils at a higher temperature.

Hence option C is correct.

To know more about force of attraction, click :

https://brainly.com/question/6958773

#SPJ3

Answer:

Stupid

Explanation:

Because there is never a answer when we are trying to find one

Answer:

1a) 857143 m

1b) 414 m

2a)

2b)

3) the medium of air has a wavelength of 0.334 m, the medium of water has a wavelength of 1.493 m, and the medium of 5.130 m.

Explanation:

Question 1a)

Given the velocity/speed, and frequency of the wave, the length can be calculated using these two quantites.

[ λ = v / f ] wavelength = velocity of the wave / frequency of the wave in Hz.

Since 3 × 10^8 × ms^-1 is the velocity, and 350Hz is the frequency.

Anything to the negative power is reciprocated. i.e ms^-1 = m/s.

The wavelength is 300000000m/350Hz = 857142.8571428..... m ≈ 857143 m

Question 1b) Given that the frequency of the second wave in water is 1% of the first wave, and the speed of the second wave is 1450ms^-1

Therefore the second wave has a frequency of 1% of 3.5 = 350/100 Hz = 3.5 Hz

The wavelength is found using the same

formula: wavelength = 1450m/3.5Hz = 414.2857142857.... m ≈ 414 m

Question 2a)

Question 2b)

Question 3) Remember, the speed of sound of the medium = frequency of the medium × wavelength of the medium.

Therefore the wavelength of the medium = speed of sound of the medium / frequency of the medium. This has a similar correlation to the wavelength formula. We are given that all these mediums have a frequency of 1KHz = 1000Hz, where So the wavelength of each medium =

Question 4)

Use the formula, F = ma, which is the basic equation of motion in classical mechanics. A slow motion will tend to have lower acceleration and vice versa

Answer:

Initial velocity describes how fast an object travels when gravity first applies force on the object. On the other hand, the final velocity is a vector quantity that measures the speed and direction of a moving body after it has reached its maximum acceleration.

Explanation:

Answer:

1. The speed of the wave is affected by wavelength frequency because waves travel through a medium and sound, ocean waves and seismic waves, etc. are the physical properties of the medium that determines the speed of the mechanical waves.

2. I think the frequency of the wave doesn't have any effect on the wave speed. Only the characteristics of the medium the wave is traveling through determines its speed.

3. As a wave moves from a medium of low density to a higher density the wave speed increases and when a wave moves from a higher density to a medium density the wave speed decreases because the wave length shortens causing the wave speed to lower.

4.If the instrument is initially flat they should tighten it because once it is tightened there is going to be force applied to the gears, and after you've reached the correct pitch the gears won't be able to move. So ultimately, you will be able to meet the intended pitch you were going for.

Answer:

AM(amplitude modulation) and FM(frequency modulation)

Explanation:

A radio frequency band is a small adjacent section of the radio spectrum frequencies, whereby channels are usually used or set aside to be used.

They are usually of two different bands called AM which is known as amplitude modulation and FM which is known as frequency modulation

Answer: if you search this up there is a video saying the answer

Explanation:

Answer:

B- Gravitational Field

Explanation:

Have a nice day, hope you get a good grade!

The  generator converts mechanical energy to electrical energy by using a conducting metal loop turning in a gravitational field.

In terms of physics, a gravitational field represent the model that should be used for explaining the impact where the massive body should be extended into the space around it. Also, generating the force on the another massive body.

Therefore, based on the above explanation, the correct option is b.

Learn more about energy here: https://brainly.com/question/18167856

Answer:

The energy transported by a wave is directly proportional to the square of the amplitude. So whatever change occurs in the amplitude, the square of that effect impacts the energy. This means that a doubling of the amplitude results in a quadrupling of the energy.

Explanation:

When the energy of a wave increases, the amplitude also increases. This is because the amplitude of the wave is directly proportional to the energy of a wave.

The amplitude of a wave may be defined as the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position. It is equal to one-half the length of the vibration path.

It is the principle of physics that when the amplitude of the wave is higher, the energy also gets higher. To summarise, waves carry energy. The amount of energy they carry is related to their frequency and their amplitude. The higher the frequency, the more energy, and the higher the amplitude, the more energy.

Therefore, when the energy of a wave increases, the amplitude also increases. This is because the amplitude of the wave is directly proportional to the energy of a wave.

To learn more about Energy and amplitude, refer to the link:

https://brainly.com/question/19036728

#SPJ6

Answer:

90

Explanation:

cause

Answer:

Their common velocity after collision is 3.6 m/s

Explanation:

Given;

mass of the first meatball, m₁ = 3.0 kg

initial velocity of the first meatball, u₁ = 6.0 m/s

mass of the second meatball, m₂ = 2.0 kg

initial velocity of the first meatball, u₂ = 0 m/s

let their common velocity after collision = v

Apply the principle of conservation of linear momentum for inelastic collision ;

m₁u₁ + m₂u₂ = v(m₁ + m₂)

(3 x 6) + (2 x 0) = v( 3 + 2)

18 = 5v

v = 18 / 5

v = 3.6 m/s

Therefore, their common velocity after collision is 3.6 m/s