Explanation:
The unit of volume derived from SI units(1) is the cubic meter, m3.
Chemists in a laboratory usually deal with much smaller volumes than cubic meters and the metric but non-SI units of liter or litre (L) and milliliter or millilitre (mL or ml) are in common use.
In 1964 the litre was redefined as being equal to exactly 1 cubic decimetre:
1 L = 1 dm3
So 1 milliltre = 1 cubic centimetre
1 mL = 1 cm3 (= 1cc)
Other metric units of measuring volume are given in the table below:
large volume → → → → → → → → → → small volume
name teralitre gigalitre megalitre kilolitre hectolitre decalitre decilitre centilitre millilitre microlitre nanolitre picolitre femtolitre attolitre
symbol TL GL ML kL hL daL dL cL mL µL nL pL fL aL
volume (L) 1012 L 109 L 106 L 103 L 102 L 101 L 10-1 L 10-2 L 10-3 L 10-6 L 10-9 L 10-12 L
why does the fire snake weight less than it was when it was on fire
Answer:
When Zoe weighs the ingredients (sugar and baking soda), it weighs 25 grams in total. When she weighs the “snake” it weighs 23 grams. This is because some carbon dioxide gas produced during the chemical reaction escapes into the air.
what english word does the following- the first two signify a male, the 1st 3 letters support a female, the first four support a great signifiles a woman. What is the english word?
Answer:
lol i know - i was rushing -_-
he= male
her=female
One word with both is heroin but Im not 100% sure
Why is a protective apron or lab coat important to use when working with acids?
Acids conduct electricity and contact could cause a shock.
Acids react with lipids and can cause damage to skin tissue.
Acids break down fabrics and can cause burns if the acids are strong.
Acids have a slippery feel and could result in a fall.
Answer:
Acids break down fabrics and can cause burns if the acids are strong.
Explanation:
A protective apron or lab coat is important when working with acids because acids break down fabrics and can cause burns if the acids are strong.
An acid is a substance that interacts with water to produce excess hydroxonium ions in an aqueous solution. A strong acid ionizes completely in solution. When they come in contact with a fabric, they break them down violently. So, if they come in contact with the skin, it causes a violent break down of body tissues. The apron acts a protective layer.Answer:
C
Explanation:
I got it right
Help me on question 5 pls I’m giving out brainlest!!
a high school physics student with a mass of 68.18 KG is sitting in a seat reading this question the magnitude of the force with which the seat is pushing up upon the student is
A) 6.96 N
B) 66.82 N
C) 668.16 N
D) 1200 N
If 3.5 waves have a distance of 42M what is the wavelength of one wave?
Please please please tell me how you exactly found the answer!!
Answer:
The answer is 12
Explanation:
Just divide 42/3.5
PLZZZ HELP
In addition to how much force Earth exerts on the object, which features of an object affect its weight?
A.mass and location of the object
B.shape and location of the object
C.location of the object and how much energy the object has
D.mass of the object and how much energy the object has
Answer/Explanation:
The weight of an object is defined as the force that is exerted due to the gravitational force.
Mathematically, it can be written as :
W = m g
Where
m is the mass of the object
g is the acceleration due to gravity
Also,
We know that the value of g varies with respect to the location. At the equator, the value of g is less as compared to the poles.
The feature of an object that affects its weight are :
Mass of the object
Location of the object
How much force Earth exerts on the object
what reactions do catalytic converters catalyze
A student lifts a basketball to a height of 6 feet and lets the ball drop to the ground. Which statement accurately compares the ball's energy at a height of 6 feet (at rest) and at a height of 2 feet (falling)?
A.
The ball's kinetic energy is the same at both heights, but its potential energy is different.
B.
The ball has less potential energy and more kinetic energy at 6 feet than at 2 feet.
C.
The ball's potential energy is the same at both heights, but its kinetic energy is different.
D.
The ball has more potential energy and less kinetic energy at 6 feet than at 2 feet.
Answer:C
Explanation:
If you are holding the ball that would be the ball would have potential energy since it it not moving. Once you drop the ball it will have kinetic energy since it’s moving. If you drop the ball from 6ft it will have more kinetic since it will have more time to accelerate. If you drop the ball from 2ft then it will have less kinetic energy since it is closer to the ground and won’t have beeping time to accelerate and get rid of the potential energy.
Answer:
c
Explanation:
What is used to turn the pointer of a galvanometer?
a.
a crank
b.
an electric current
c.
a bar magnet
d.
a battery
Answer:
b. an electric current is used to turn the pointer of a galvanometer
Explanation:
well , galvanometer is an important device which is used to detect an electric current through a conductor or circuit.
something special about it is that it can detect very minute current too
Answer:
b
Explanation:
4. The electric force between electric charges is much larger than the
gravitational forces between charges. Why, then, is the gravitational force
between the Earth and the Moon much larger than the electric force between
them?*
A. The electric force is small in comparison because charges are VERY small but the
gravitational force has to do with the mass of the Earth and Moon.
B. The electric charge is actually greater and the question is false.
C. The phases of the Moon determine the amount of electric and gravitational force.
The electric force is small in comparison because charges are VERY small but the
gravitational force has to do with the mass of the Earth and Moon.
if a 60 kg person was standing on a platform at the surface of saturn and they jumped, they would have to push with a force greater than..?
Answer:
A 60 kg person standing on a platform at the surface of Saturn and they jumped, they would have to push with a force greater than 540 N
Explanation:
The gravitational attraction between an object on the surface of a planet and the planet is given by the weight of the object
Therefore the force needed to be applied for an object to lift off the surface of a planet = The weight of the object
The weight of the object on the surface of a planet = m × g
Where;
m = The mass of the object
g = The strength of gravity on the planet's surface in N/kg
The given parameters are;
The mass of the person standing on a platform at the surface of Saturn, m = 60 kg
The strength of gravity on the surface of Saturn = 9 N/kg
Therefore, we have;
The weight of the person = The force greater than which the person would have to push on the surface of Saturn so as to Jump = The weight of the person on the surface of Saturn = 60 kg × 9 N/kg = 540 N
Therefore, for a 60 kg person standing on a platform at the surface of Saturn and they jumped, they would have to push with a force greater than 540 N.
this is an area where two tectonic plates move towards each other with one going under the other plate?
Answer:Convergent boundaries are areas where plates move toward each other and collide. These are also known as compressional or destructive boundaries. Subduction zones occur where an oceanic plate meets a continental plate and is pushed underneath it. Subduction zones are marked by oceanic trenches.
pLS THANK ME AND VOTE ME BRAINLIEST ME
Explanation:
A ‘thermal tap’ used in a certain apparatus consists of a silica rod which
fits tightly inside an aluminium tube whose internal diameter is 8mm at
0
0C. When the temperature is raised, the fit is no longer exact. Calculate
what change in temperature is necessary to produce a channel whose
cross-section is equal to that of a tube of 1mm internal diameter. (linear
expansivity of silica = 8X10-6
/K and linear expansivity of aluminium =
26X10-6
/K )
Correct question is;
A thermal tap used in a certain apparatus consists of a silica rod which fits tightly inside an aluminium tube whose internal diameter is 8mm at 0°C.When the temperature is raised ,the fits is no longer exact. Calculate what change in temperature is necessary to produce a channel whose cross-sectional is equal to that of the tube of 1mm. (linear expansivity of silica = 8 × 10^(-6) /K and linear expansivity of aluminium = 26 × 10^(-6) /K).
Answer:
ΔT = 268.67K
Explanation:
We are given;
d1 = 8mm
d2 = 1mm
At standard temperature and pressure conditions, the temperature is 273K.
Thus; Initial temperature; T1 = 273K,
Using the combined gas law, we have;
P1×V1/T1 = P2×V2/T2
The pressure is constant and so P1 = P2. They will cancel out in the combined gas law to give:
V1/T1 = V2/T2
Now, volume of the tube is given by the formula;V = Area × height = Ah
Thus;
V1 = (πd1²/4)h
V2 = (π(d2)²/4)h
Thus;
(πd1²/4)h/T1 = (π(d2)²/4)h/T2
π, h and 4 will cancel out to give;
d1²/T1 = (d2)²/T2
T2 = ((d2)² × T1)/d1²
T2 = (1² × T1)/8²
T2 = 273/64
T2 = 4.23K
Therefore, Change in temperature is; ΔT = T2 - T1
ΔT = 273 - 4.23
ΔT = 268.67K
Thus, the temperature decreased to 268.67K
A car moving round a circular racing track takes 120s to do a lap of 8km what is the speed in km/hr.
Answer:
Solution in photo
Explanation:
A car moves around in a circular racing track, and it takes 120 seconds to do a lap of 8 km, so the speed in km/hr is 239.76 km/hr.
What is Speed?The speed of an object, commonly known as v in mechanics, is a scalar quantity that corresponds towards the size of the change in that object's position over duration or the size of the change in that object's position per unit of time.
The instantaneous velocity is the absolute maximum of the average speed as the time interval's duration gets closer to zero. The cruising pace of an object in a time interval is calculated by dividing its distance traveled by the time interval's duration. Velocity and speed are different concepts.
The given data according to the question is,
Time, t = 120 s
Distance, d = 8 km
s = 8/120
s =0.0666 km/sec or
s = 0.0666/1s × 3600
s = 239.76 km/hr.
Therefore, the speed is 239.76 km/hr.
To know more about Speed:
https://brainly.com/question/312131
#SPJ2
a stone is thrown vertically upwards with an initial velocity of 20 metre per second find the maximum height it reaches and the time taken by to reach the height( g =10m/s)
Answer:
y = 20 [m]
Explanation:
To solve this type of problem we must use the following equation of kinematics.
[tex]v_{f}^{2} =v_{o}^{2}-2*g*y[/tex]
where:
Vf = final velocity = 0
Vo = initial velocity = 20 [m/s]
g = gravity acceleration = 10 [m/s²]
y = elevation [m]
Now the key to solving this problem is to know that when the stone reaches the maximum height its speed is zero. Therefore the final velocity term is zero.
[tex]0 = (20)^{2}-2*10*y\\20*y=400\\y=20 [m][/tex]
Another important fact is that the sign of gravitational acceleration was taken as negative, since it acts in the opposite direction to the movement of the stone.
identfy the parts of he atom that are labeied in the
dagram
Label A:
Label B
NEED THE ANSWE ASAP!
Answer :
Label A - nucleus.
Label B- electron cloud.
Explanation :
An atom is the smallest unit of a matter that consist of three subatomic particles which are electrons, protons and neutrons.
The protons and the neutrons are located inside the nucleus or the center of the nucleus where the mass of the an atom is concentrated.
The electrons are located around the nucleus.
The protons are positively charged, the electrons are negatively charged and the neutrons are neutral that means it has no charge.
In the picture, label A shows the nucleus.
Electrons has the ability to revolve around the nucleus in a fixed circular orbit. Electron cloud represents the spreading of the electrons energy.
In the picture, label B shows the electron cloud.
Hence, the label A - nucleus and label B- electron cloud.
Which of these force&mass pairs will result in the largest acceleration? *
50 N and 5 kg
60 N and 3 kg
30 N and 1 kg
25 N and 100 kg
10 N and 8 kg
Answer:
30N and 1 kg has largest acceleration
hope it helps youWrite down the factors on which moment depends upon ?
Answer:
The size of a forceThe perpendicular distance from the pivot the line of action of forceExplanation:
Factors that affect the moment of a force are;
The size of a forceThe perpendicular distance from the pivot the line of action of forceThe magnitude of force applied is directly proportional to the moment of force in that for a perpendicular distance d, increased in force applied will result to a higher moment of force. When the perpendicular distance from the pivot is decreased while the force applied remains constant, the moment of force decreases.
if an object with a mass of 248kg is lifted 76 meters in 18 seconds, how much power is used?
Explanation:
power = 1/2 mass × velocity^2 >>1
velocity = distance / time = 76 /18 = 4.2m
then power = 1/2 × 276 × (4.2)^2 = 138 × 17.64 = 2,434.3 jules.
what is SI unit electric current ?
Answer:
the si unit of electric current is Ampere .the flow of charge in a close circuit is called electric current
Problems - Show all work.
1. A carnival ride has a radius of 10.00 m and rotates at a speed of 3.00 m/s. Find the period of one complete revolution.
Given:
r=
v=
Unknown:
T=?
Equation:
v=2*pi*r/T
Answer:
21s
Explanation:
Given parameters;
Radius = 10m
Speed or velocity = 3m/s
Unknown:
Period = ?
Solution:
To solve this problem, use the expression:
v = [tex]\frac{2\pi r}{T}[/tex]
r is the radius
T is the unknown
Input the parameters and solve for T;
3 = [tex]\frac{2 x \pi x 10}{T}[/tex]
62.84 = 3T
T = 21s
Which has the greatest amount of energy: ultraviolet rays, infrared rays, or
microwaves? (1 point)
Answer:
ultraviolet rays
Explanation:
It is because it have more photons.
The electric field between two parallel plates has a magnitude of 180 N/C. The two plates are 2.5 cm apart. Recall that the magnitude of the charge on an electron is 1.602 × 10-19 C.
How much work is done to move an electron from the positive plate to the negative plate?
4.0 × 10-21 J
7.2 × 10-19 J
4.5 J
7200 J
Answer:
b
Explanation:
The amount of work done to move an electron from the positive plate to the negative plate is : 7.2 * [tex]10^{-19}[/tex] J
Step 1: Given data
magnitude of two parallel plate ( E ) = 180 N/C
Distance between plates ( d ) = 2.5 cm
magnitude of charge on electron ( e ) = [tex]1.602 * 10^{-19}[/tex] C
Step 2 : determine the work done
Work done = qV = еEd
= [tex]1.602 * 10^{-19}[/tex] * 180 * 2.5
= 720 * [tex]10^{-22}[/tex] J ≈ 7.2 * [tex]10^{-19}[/tex] J
Hence the amount of work done to move an electron from the positive plate to the negative plate = 7.2 * [tex]10^{-19}[/tex] J
learn more about electric field : https://brainly.com/question/11509296
Sam scored 98, 25, 105, 62 and 65 runs in 5 matches. What was the average score per match?
Answer:
71
Explanation:
A sprinter runs at a forward velocity of 8.94 m/s. If the sprinter has a mass of 62.4 kg, what is the sprinter's kinetic energy?
1. 2500 J
2. 249 J
3. 249.3 J
4. 2490 J
Plzzz help me!!!
Answer: 2490 J
Explanation:
The formula to calculate kinetic energy is 1/2mv² where,
m = mass = 62.4
v = velocity = 8.94
Kinetic energy = 1/2mv²
= 1/2 × 62.4 × 8.94²
= 1/2 × 62.4 × 79.9236
= 2493.6J
The closest answer is option D.
A bungee jumper starts with 1000 J in their GPE store. After they jump they fall and are brought to a stop with the bungee cord. With the cord fully stretched what is the energy in the EPE store?
Answer:
energy is equal to 1000 J
Explanation:
When the jumper is in the tent, he has a given height, this height gives him a gravitational potential energy, which forms his initial mechanical energy of 1000 J. After jumping, this energy is converted into elastic energy of the rope plus a remainder of potential energy gravitational, it does not reach the ground, but as the friction is negligible the total mechanical energy is conserved, therefore its energy is equal to 1000 J
This is a case of energy transformation, but the total value of mechanical energy does not change
Which of the following statements about infrared telescopes is NOT true?
a. They are typically operated at lower temperatures.
b. They are especially helpful for viewing cool or obscured astronomical objects.
c. They were first built in the 1960s.
d. They are often placed on mountaintops.
e. They do not work well at high altitudes.
Answer:
a. They are typically operated at lower temperatures.
a. They are typically operated at lower temperatures.b. They are especially helpful for viewing cool or obscured astronomical objects.
When you heat water, it changes from-- *
A a gas to a liquid
B a liquid to a gas.
C a liquid to a solid
Answer:
Hi! It's B - liquid to a gas.
A dog starts at position x=2.50m, and undergoes a displacement of 8.25m. What is its final position?
Answer:
Civil law deals with behavior that constitutes an injury to an individual or other private party, such as a corporation. Examples are defamation (including libel and slander), breach of contract, negligence resulting in injury or death, and property damage.
Explanation: