. a. Calculate the work done while lifting 300 kg of wate through a vertical height of 6 m. (Assume g = 10 m a =​

Answers

Answer 1

Answer:

potential energy = mgh = 300 × 10 × 6m = 18000 joule or 18 kilo joule.

Explanation:


Related Questions

do forces that act a distance come in pairs?

Answers

Answer:

Forces come in pairs.

Explanation:

Distances are between two points. The distance from A to B is equal but opposite the distance from B to A.

All satellite eventually lose their orbital energy and plummet to earth because of______.

Answers

Answer:

gravity

Explanation:

Even when satellites are thousands of miles away, Earth's gravity still tugs on them. Gravity—combined with the satellite's momentum from its launch into space—cause the satellite to go into orbit above Earth, instead of falling back down to the ground.

The gravitational potential energy of a cucumber-harth system changes when which factor changes?

A) the cucumber's speed
B) the cucumber's mass
c) the cucumber's temperature
D) the length

Answers

The cucumbers mass.

If it’s heavier, the gravitational pull will bring it down faster.

which constellation is in contrast with ursa major

Answers

Answer: Ursa Major (/ˈɜːrsə ˈmeɪdʒər/; also known as the Great Bear) is a constellation in the northern sky, whose associated mythology likely dates back into prehistory. Its Latin name means "greater (or larger) she-bear," referring to and contrasting it with nearby Ursa Minor, the lesser bear.

Bordering constellations: Draco; Cameloparda...

Brightest star: ε UMa (Alioth) (1.76m)

Meteor showers: Alpha Ursa Majorids; Leonid...

Symbolism: the Great Bear

“Applications of thermal expansion in solids, liquids and gases.”
(Two for each states of matter)​

Answers

Thermal expansion is the tendency of matter to change its shape dimensions, density in response to a change in temperature.

The following are applications of thermal expansion in various matter.SolidsThe principle of thermal expansion is used in thermostat to regulate the temperature of heating device e.g Electric pressing Iron.Rivets are used to hold steel plates together very tightly.

 

  2. Gases

Hot-air balloons are an application of thermal expansionGases turbine

    3. Liquids

Engine CoolantsVolume of thermometer

Learn more about Expansion of matter here:

https://brainly.com/question/518065

soda is an example of which of these?

liquid–liquid solution

gas–liquid solution

solid–liquid solution

solid solution

Answers

B. Gas-liquid
solution


A car has a kinetic energy of 4.33x10^5 J when traveling a speed of 25 m/s. What is the mass ?

Answers

4.33x50

10^5 would be 50 so 50/25

find u + (3v - w)
u =-4i-8j
v= -11i -3j
w=5i+7j

Answers

Answer:

gunrun

Explanation:

10 time 20 minus 5 and yeah that’s all i need

Answers

Answer:

[tex]10 \times 20 - 5 \\ \\ = 200 - 5 \\ = 195[/tex]

1. Sandra buys a $4 000 television and pays $2 000 deposit. The rest is payable in 8 equal monthly payments. If the flat rate of interest charged is 7% p.a. what is the total amount paid for the item?

Answers

Answer:

$2140

Explanation:$2000 missing plus 7 percent of 2000 is 140 so 2000+140=2140. Each month she would pay $268 approx.

Which does not apply to unbalanced forces?


Net force = 0


Have direction


Net force does not = 0


Changes an object's motion

Answers

Answer:

Net force = 0

Explanation:

Whenever there is an unbalanced force, it shows that the net force doesn’t = 0 because if net force = 0, then everything force is balanced by another force. If there is an unbalanced force, acceleration will occur in the direction the net force is towards.

Which statement most completely describes a Lewis electron dot diagram? A.
a representation of the electrons that form bonds in a molecule
B.
a representation of the total number of electrons in an element, compound, or ion
C.
a representation of the total number and arrangement of electrons in an element, compound, or ion
D.
a representation of the arrangement of valence electrons in an element, compound, or ion

Answers

Answer:

D.

Explanation:

it is indeed a representation of how the valence electrons in an element,coumpound, or ion are arranged.

to ensure you i was just quized on this and D is the correct anwser

A representation of the arrangement of valence electrons in an element, compound, or ion -  statement most completely describes a Lewis electron dot diagram. Hence, option (D) is correct.

What is Lewis electron dot diagram?

If the compound's molecular formula is known, electron dot structures or Lewis dot formulas can be drawn.

It describes the type of bond and the placement of the atoms within the molecule that are joined together. In honor of American chemist Gilbert Newton Lewis, molecules are depicted as having a Lewis electron dot structure or simply a Lewis structure.

Lewis dot structures, also known as electron dot structures, are schematics that show the interatomic chemical bonds in a molecule. Additionally, they show how many lone pairs there are overall in each of the atoms that make up the molecule. Common names for Lewis dot structures include electron dot structures and Lewis structures. Lewis described an acid as an electron pair acceptor, while a base is an electron pair giver.

Learn more about  Lewis electron dot diagram here:

https://brainly.com/question/19093827

#SPJ2

advantages of writing very large and very small numbers in the terms of power of ten​

Answers

Answer:

Large numbers might create fuse, be confusing and if you miss even one of the zeros it is a very big deal in a situation when you are making a spaceship. Hope this answers your questions :) Merry Christmas. Have fun.

Explanation:

2

Explanation:

for saving space in large numbers

and small numbers for multiplying easily

45. What is the wovelength of a 30. Hertz periodic
wave moving ol 60. meters per second?

a. 0.50m
c. m
b 20m
d 1800 m

Answers

The wavelength is 2m.

Hence, Option c) 2m is the correct answer

Given that;

Frequency; [tex]f = 30Hz[/tex]

Speed; [tex]v = 60m/s[/tex]

Wavelength; [tex]\lambda =\ ?[/tex]

using the expression for the relations between wavelength, frequency and speed of wave:

[tex]\lambda = \frac{v}{f}[/tex]

Where [tex]\lambda[/tex] is wavelength, f is frequency and v is speed.

We substitute our given values into the equation

[tex]\lambda = \frac{60m/s}{30Hz}\\\\\lambda = \frac{60m/s}{30s^{-1}}\\\\\lambda = 2m[/tex]

The wavelength is 2m.

Hence, Option c) 2m is the correct answer.

To learn more about wavelength, click here: https://brainly.com/question/1347107

The frequency of the moving wave is 30 Hz and if it is moving at the speed of 60 m/s then the wavelength will be equal to 2 m.

What is Wavelength?

The distance between two identical locations (adjacent crests) in successive cycles is known as the wavelength, and it is used to describe waveform signals that are transmitted over wires or into space. Typically, in wireless systems, this length is specified in meters (m), centimeters (cm), or millimeters (mm).

The wavelength is more frequently described in nanometers (nm), which are units of 10⁻⁹ m, or angstroms, which are units of 10⁻¹⁰ m, for infrared (IR), visible light (UV), and gamma radiation.

As per the provided given data in the question,

Frequency, f = 30 Hz

Speed, v = 60 m/s

Then, the wavelength of the moving wave will be,

λ = v/f

= 60/30

λ = 2 meters.

Therefore, the wavelength will be 2 meters.

To know more about Wavelength:

https://brainly.com/question/13533093

#SPJ2

A geothermal plant has been built in a location. Which of these is the most likely benefit of the geothermal plant in this location?

A. Decrease in geothermal fuels consumption
B. Improvement to hot springs and geysers
C. Long-term cost savings for energy users
D. Increase in emission of greenhouse gases

Answers

Answer:

C

Explanation:

A and B are not true and D is a disadvantage

Answer:

C.  Long-term cost savings for energy users.

Explanation:

C is correct because the first option is a drawback that is unlikely.  B is a good answer but not the best.  It's a likely benefit, but C is a more likely benefit.  D is a drawback.  C is correct.  I also got this right on my quiz.

Hope this helps!

can you fit all the planets between earth and moon

Answers

Answer: No, planets of our solar system, with or without Pluto, cannot fit within the mean lunar distance. An additional 3,500 km is needed to squeeze in Neptune

which statement is not correct about force.

A, force causes deformation
B, force xauses accleration
C, if there is no force, there is no motion
D, force emerges due to interaction.​

Answers

Answer:

c

Explanation:

without force motion won't take place

if a tent is touched with a finger on inner surface , when it is raining , it allows the rain water to leak through. give a reason for this observation

Answers

Explanation:

When water vapor in the air comes into contact with something cool, like the ceiling of a tent, its molecules slow down and get closer together. When that happens, the gaseous water vapor turns back into liquid water droplets. That's condensation!

Please help me answer this! ANSWER IN SCENTENCE FORMAT!!! :
Two factors that affect climate patterns on Earth are the tilt of Earth on its axis and the topography of Earth. Describe how these two factors affect the climate patterns of Earth.

Answers

The answer is
You need to look at the top of the axis
You need to look

Answer:

If you are saying How much does the tilt of the Earth affect the climate

This varies between a tilt of 22.1 and 24.5 degrees over a period of about 41,000 years. This trend not only affects the average temperature of the earth, but also how prominent the seasons are. Procession is a wobble in the earth's axis.

? Any idea on this I’m getting some mixed up

Answers

Answer:

1. electrochemical reaction

2. combustion

3. photosynthesis

4. respiration

Explanation:

please help me !! i’ll mark brainliest if you’re right!

Answers

Option 2nd is the answer

how is the physical property of density calculated?

Answers

Answer:

The formula for density is d=M/V

Explanation:

where d is density, M id mass, V is volume.

A race car makes one lap around a track of radius 180 m in 90.0 s. What is the centripetal acceleration in m/s2?
a
0.5
12.6
Ob
OC
Od
.87
2.
2

Answers

Answer:

0.9m/s^2 (yours is 0.87, so choose that)

Explanation:

formula for centripetal acceleration:

v^2/r

to find v, we know that f=1/90s, and r=180m.

v=(2pir)/T

v=(2pi(180))/90

v=12.6m/s

now plug into a=v^2/r

a=(12.6)^2/180

a=0.9m/s^2

The gravitational potential energy of the ball changes as it bounces. Where is the ball located when its gravitational potential energy is greatest? Where is the ball when its gravitational potential energy has the least value?

Answers

When the planet is closest to the Sun, speed v and kinetic energy are the highest, and gravitational potential energy is the lowest. When the planet moves farther away, the speed and kinetic energy decrease, and the gravitational potential energy increases.

"PLS HELP ME WITH THIS QUESTION!" Two factors that affect climate patterns on Earth are the tilt of Earth on its axis and the topography of Earth. Describe how these two factors affect the climate patterns of Earth.

Answers

Answer:

The tilt of the Earth causes some places to be hit more by the sun's rays, while the topography affects wind travel.

Explanation:

Because of the way the Earth is tilted on its axis, some parts receive more heat due to being hit more directly by the sun's rays. This is the reason why the North pole is very cold since it doesn't get directly hit by the sun's rays. As for the topography, the way the wind travels is affected by mountains, and the temperature of winds are affected by the places the wind originated from. Also, high altitude places such as mountain summits are colder, while low altitude places are warmer. So, when an area is under direct sunlight, it causes warm climate, and when an area receives warm air because of its topography, it causes further heat.

Read the excerpt from The Building of Manhattan.

A temporary, small narrow-gauge track system was installed on each floor as it was needed. This enabled the material to be moved from the truck at ground level onto dump carts, raised by elevator to the designated floor, wheeled onto the track, and moved quickly to the exact spot needed. Turntables built into the track allowed the carts to be shifted about in any direction.

Which question can be answered only if an illustration accompanies the text?

What did turntables built into the track allow?
How were dump carts raised to designated floors?
When was a track system installed on a floor?
What does a turntable built into a track loo

Answers

Answer: this would be D.) What does a turntable built into a track look like

Explanation:

What does the risk of biological harm from radiation depend on?

Answers

Answer:

The effects of radiation depend on the type, energy, and location of the radiation source, and the length of exposure.

Student 1 lifts a box with a force of 500 N and sets it on a tabletop 1. 2 m high. Student 2 pushes an identical box up a 5 m ramp from the floor to the top of the same table. Which student did the MOST work?.

Answers

The student 2 did the MOST work because he pushed the box to a greater height.

The given parameters:

Force applied by Student 1 = 500 NHeight of table for student 1 = 1.2 mHeight of ramp for student 2 = 5 m

The work done by student 1 is calculated as follows;

Work = P.E = mgh

P.E = 1.2mg

The work done by the student 2 is calculated as;

P.E = 5mg

where;

m is the mass of the box

Thus, we can conclude that the student 2 did the MOST work.

Learn more about work done here: https://brainly.com/question/8119756

An experiment is conducted such that an applied force is exerted on a 5kg object as it travels across a horizontal surface in which frictional forces are NOT considered to be negligible. A graph of the net force exerted on the object as a function of the object’s distance traveled is shown. How could a student use the graph to determine the net work done on the object?

Answers

If an experiment is conducted such that an applied force is exerted on an object, a student could use the graph to determine the net work done on the object.

The  graph of the net force exerted on the object as a function of the object’s distance traveled is attached below.

A student could use the graph to determine the net work done on the object by Calculating the area bound by the line of best fit and the horizontal axis from 0m to 5m

For more information on work done, visit

https://brainly.com/subject/physics

Answer:

D. There is not enough information that is known or can be obtained from the graph to determine the net work done on the object.

Explanation:

it’s the answer For Ap classroom

The ratio between the force of friction and the normal force is called:

A.the drag
B.rolling friction
C.the coefficient of friction
D.the starting friction

Answers

Answer:

C.the coefficient of friction

Explanation:

Hope this helps. can i have brainliest thanks!

Other Questions
What are the procedure to Impeachthe President?House --Senate - Which technological advancement originated during the Gupta period or "Golden Age" of India? Haseena bought 1 pencil box, 4 pencils and 4 notebooks from a store. She paid Rs. 95 in all. Some ink fell on the bill that she got from the store. So the price of 1 notebook cannot be seen from the bill.What is the price of the one notebook? What is the diameter of a circular swimming pool with a radius of 9 feet? Enter only the number What is the default folder for text file Jennifer was pleasantly surprised with how things turned out on her date with Jose Manuel. Before the evening started, she was not sure she really liked him, but after watching a movie together ("Carrie") she was experiencing strong feelings for him. According to ___________, Jennifer may have misinterpreted the arousal experienced from the "scary" movie as physical attraction to Jose Manuel. How did the United States gain control of Hawaii im stuck step bro #im a guy Which characteristics best describe Cajun culture? Check all that apply. Cajun music features ballads, or story songs. Cajun styles of dance include a form of ballet. Cajun culture was created by the Acadian people. Cajun culture began after a migration in the 1800s. Cajun culture includes spicy food and other cuisine. Cajun culture has helped shape the state of Louisiana. Help help help history history ASAP Gii phng trnh: 2x + x + 12 =0 Which orbital notation correctly represents a noble gas in the ground state?. What is the purpose of a FiveM Staff Team? When music modulates, it changes _________. Type the correct answer in the boxHow is it possible to understand the flow of data in an organization?Conducting ______ with each team member makes it possible to understand the flow of data in an organization. Help Needed!!! Traveling the Natchez Trace could be very dangerous during the early part of our states history. Discuss the dangers of traveling the Natchez Trace. Could someone help. Please show work Given: ABC, mA=60,mC=45, AB=9Find: Perimeter of ABC,Area of ABC x - y = -4 -5 + 6y = 22The answer is (-2,2) but i just need to show the work for it so please help with that. In 1347, a terrible plague brought death and destruction to Europe.It started in Sicily in 1347. Citizens in the small seaport of Messina began to get headaches. Then camefevers, chills, nausea, and pain. Soon, red blotches appeared on their skin, and the lymph nodes(clumps of tissue) in their armpits and groins swelled to the size of eggs.The nodes grew hard until they turned black andoozed blood and pus. In most cases, death came soonafterward. "It was such a frightful thing." observedGiovanni Boccaccio (Joh-VAHN-neeboh-KAH-chee-oh), an Italian writer, "that when itgot into a house...no one remained. Frightened peopleabandoned the house and fled to another."The gist: