3. How much power does an electric light installation draw at 120 V if it creates a current of 0.8 amps?
O A. 32 watts
O B. 120 watts
Q C. 48 watts
D. 96 watts

Answer:

Yes , i also need answer

Explanation:

n earthquake emits both P-waves and S-waves that travel at different speeds through the Earth. A P-wave travels at 9 000 m/s and an S-wave at 4 000 m/s. If P-waves are received at a seismic station 34.0 s before an S-wave arrives, how far is the station from the earthquake center

The answer is:

That they are switched on

Answer:

by giving a person to person

Explanation:

this is the answer to the questions

If the speed of the magnet is doubled, the induced voltage is twice as great

Faraday's law of induction states that whenever relative motion exists between a coil and magnetic field, a voltage will induce in the circuit and this voltage is proportional to the rate of change of the flux. The expression for the motional emf is as follows:

ε=Blv

Here, ε is the motional emf, B is the magnetic field, l is the length of the conductor, and v is the velocity at which the magnetic field changes.

The induced voltage by the moving magnet is directly proportional to the speed of the magnet. Therefore, an increase in the speed of the magnet will increase the induced voltage.

If the speed of the magnet is doubled, the induced voltage is twice as great

Find out more at: https://brainly.com/question/13369951

Answer:

Hey Friend...

Explanation:

This is ur answer.....

Hope it helps!

Brainliest pls!

Follow me! :)

Answer:

4

Explanation:

element is a substance that cannot be broken down into any other substance which means every element is made up of its own type of atom

Answer:

merry Christmas ⛄

If initial speed was v, Kinetic energy was K = 1/2mv^2

When speed will be 4v, KE will be:

= 1/2 m (4v)^2

=1/2m 16 v^2

=16K

Now kinetic energy will become 16 times of initial Kinetic Energy

The initial temperature of the metal bolt is 80.8 °C

We'll begin by calculating the heat absorbed by the water.

Q = MCΔT

Q = 0.15 × 4184 × 4

Q = 2510.4 J

Finally, we shall determine the initial temperature of the metal bolt.

Q = MC(T₂ – T₁)

–2510.4 = 0.050 × 899 (25 – T₁)

–2510.4 = 44.95 (25 – T₁)

Clear bracket

–2510.4 = 1123.75 – 44.95T₁

Collect like terms

–2510.4 – 1123.75 = –44.95T₁

–3634.15 = –44.95T₁

Divide both side by –44.95

T₁ = –3634.15 / –44.95

T₁ = 80.8 °C

Thus, the initial temperature of the metal is 80.8 °C.

Learn more about heat tranfer:

https://brainly.com/question/26034272

The kinetic energy of the roller coaster at the bottom of the hill is 12250000 J

To answer this question, we must understand that the energy of a system is always conserved as explained by the law of conservation of energy.

The kinetic energy of the roller coaster will be equivalent to the potential energy of the roller coaster.

The kinetic energy of the roller coaster can be obtained as follow:

Kinetic energy = Potential energy

KE = mgh

KE = 2500 × 9.8 × 500

KE = 12250000 J

Therefore, the kinetic energy of the roller coaster is 12250000 J

Learn more about kinetic energy: https://brainly.com/question/14449170

From orbital speed formula which is the ratio of the circumference of the earth and the period of time, it will take 6097.6 seconds to travel 100,000 ft

Given that the space shuttle Discovery has a constant acceleration of 16.4 ft/s with an initial velocity of 1,341 ft/s due to the rotation of the Earth.

The period of time T it will require to travel round the a distance 100,000 ft can be calculated by using the formula below.

V = 2πr / T

Where 2πr = 100,000 ft

V = 16.4 ft/s

Substitute both in the formula above.

16.4 = 100000 / T

T = 100000 / 16.4

T = 6097.6 seconds

Therefore, it will take 6097.6 seconds to travel 100,000 ft

Learn more about orbital speed here: https://brainly.com/question/855117

The change in the length of the spring as it stretches from 4.0 cm to 6.0 cm is 2.0 cm.

The change in length of the spring can be calculated by subtracting the initial unstretched length (4.0 cm) from the final stretched length (6.0 cm).

Change in length = Final length - Initial length

Change in length = 6.0 cm - 4.0 cm

Change in length = 2.0 cm

Therefore, the change in the length of the spring as it stretches from 4.0 cm to 6.0 cm is 2.0 cm. This means the spring elongates by 2.0 cm under the applied load between points A and B.

To learn more about length of the spring, here

https://brainly.com/question/34758395

#SPJ2

The complete question is:

The average value of the load between A and B is 6.0 N. The spring has an unstretched length increases from 4.0 cm to 6.0 cm. What is the change in the length of the spring as it stretches from 4.0 cm to 6.0 cm?

Answer:

woah awesome so cool

Explanation:

Answer:

woah excellent!

Answer:

The new speed of the car is 30 m/s.

Hope you could get an idea from here.

Doubt clarification - use comment section.

Answer:

Is your question asking for the muzzle velocity of the bullet?

Explanation:

I will assume it does

The bullet travels horizontally to the target in the same amount of time it falls 2.3 cm from vertical rest

s = ½at²

t = √(2s/g) = √(2(0.023) / 9.8) = 0.0685118...s

v = d/t = 47/0.0685118 = 686.01242...

v = 690 m/s

Answer:A.the Oort cloud

Explanation:

Answer:

try answer A..the Ootor cloud

Explanation:

A. The centripetal force experienced by an electron as it goes around a hydrogen nucleus is given by

[tex]F_c = m_e\dfrac{v^2}{r}[/tex]

where [tex]m_e = \text{electron\:mass} = 9.11×10^{-31}\:\text{kg}[/tex]

[tex]r = 5.17×10^{-11}\:\text{m}[/tex] = orbital radius

[tex]v = 2.16×10^6\;\text{m/s}[/tex] = orbital velocity

so the centripetal force is

[tex]F_c = (9.11×10^{-31}\:\text{kg})\dfrac{(2.16×10^6\;\text{m/s})^2}{5.17×10^{-11}\:\text{m}}[/tex]

[tex]\;\;\;=8.22×10^{-8}\:\text{N}[/tex]

B. The electron's centripetal acceleration is given by

[tex]a_c = \dfrac{v^2}{r}[/tex]

Using the values from (A), we get

[tex]a_c = \dfrac{(2.16×10^6\;\text{m/s})^2}{5.17×10^{-11}\:\text{m}}[/tex]

[tex]\;\;\;=9.02×10^{22}\:\text{m/s}^2[/tex]

Answer:

Explanation:

20° from the normal = 110° from parallel

1a) τ = (200sin90)[6] + (75sin110)[3] - (100sin110)[3]

     τ = 1,129.52305... = 1100 N•m CCW

1b) τ =  200(6)(sin90) + 75(-3)(sin(360-110)) + 100(3)(sin(270 + 20)

     τ = 1,129.52305... = 1100 N•m CCW

1c) My directions agree, both are positive z by right hand rule.

1d) Moment of inertia for a thin rod about an axis perpendicular to its center is

I = (1/12)mL²

τ = Iα

α = τ/I = 1129.523 / ((1/12)(200)(12²)) = 0.4706 rad/s²

θ = ½αt²

θ = ½(0.4706)(2•60)² = 3,388.56916... radians

θ = 3400 radians

at which time is is spinning about 9 revolutions per second

The change in the Gibb's free energy per mole (G) is 1.96 J.

The given parameters:

The change in the Gibb's free energy per mole (G) is calculated as follows;

[tex]\Delta G = V(P_2-P_1) \\\\[/tex]

where;

V is the volume of the ice

[tex]Density = \frac{Mass}{Volume} \\\\Volume = \frac{Mass}{Density} \\\\Volume = \frac{18 \times 10^{-3} \ kg}{917 \ m^3} \\\\Volume = 1.96 \times 10^{-5} \ m^3\\\\Volume = 1.96 \times 10^{-5} \ m^3 \times \frac{1000 \ L}{m^3} \\\\Volume = 0.0196 \ L[/tex]

Change in pressure;

[tex]P_2 - P_1 = 2.0 \ bar \ - \ 1.0 \ bar = 1.0 \ bar = 0.987 \ atm[/tex]

The change in the Gibb's free energy per mole (G);

[tex]\Delta G= V(P_2-P_1)\\\\\Delta G = 0.0196\ L \times 0.987\ atm \\\\\Delta G = 0.0193 \ L.atm\\\\1 \ L.atm = 101.325 \ J\\\\\Delta G = 0.0193 \ L.atm \times \frac{101.325 \ J}{1 \ L.atm} \\\\\Delta G = 1.96 \ J[/tex]

Thus, the change in the Gibb's free energy per mole (G) is 1.96 J.

Learn more about Gibb's free energy here: https://brainly.com/question/10012881

Answer: Next time you create a question, add an image or PDF. Because I do not know the question. So, may you please create a new question?

The work done if the forklift is operating at full capacity is 11,900 J.

We have to recall that power is defined as the rate of doing work. The rate of doing work is defined as;

Power = Work done/time taken

When;

Power = 4950 W

Time taken = 2.40 s

Work done = Power × time taken

Work done = 4950 W × 2.40 s

Work done = 11,900 J

Learn more about work done: https://brainly.com/question/3902440

Answer:

Explanation:

Circumference in meters is

C = πD = 0.68π

9200 m / 0.68π m = 4,306.545518...

4,306.5 revolutions

A bicycle with tires 68 cm in diameter travels 9.2 km. the number of revolutions made by the wheel would be 4309

The total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object.  It can also be represented by the infinitesimal rate of change of displacement with respect to time. The unit of velocity is meter/second.

The mathematical expression for velocity is given by

velocity= displacement  / time taken

As given in the problem a bicycle with tires 68 cm in diameter travels 9.2 km

Diameter = 68 cm

radius = diameter /2

          = 68/2

         = 34 cm

The distance covered by the tire in one cycle would be

distance in one revolution = 2π×Radius

                                            = 2×3.14× 34

                                            = 213.52 cm

                                            =2.13 m

The number of revolutions by wheel = total distance/distance in one revolution

number of revolutions = 9200/2.135

                                    =4309 revolutions

Thus, the number of revolutions made by the wheel would be 4309

Learn more about Velocity from here

brainly.com/question/18084516

#SPJ6

σ = F/A = F/ (πD²/4) = 20000 / (π0.10²/4) = 2.55 MN/m²

Explanation:

We know that,

→ F = (6 × 6) N

→ F = 36 N

Therefore, the net force is 36N.

There are many ways you can get wooden steps to be less slippery even when they are wet. Some ways are:  

*You can put a carpet on the steps. The fibers in a carpet usually have some friction which will give you a grip as you climb up and/or down and prevent you from falling.  

*You can apply anti-slip coatings like a paint on the steps. If you add some sand to the paint to add traction and lessen the slippery nature. Alternatively, If the wood has been waxed, you may consider using a wax remover.  

*You can fix a hand railing so that you can hold on to it when you go up and down the steps.

Answer:

c. index fossil

Explanation:

Trilobite fossils are found worldwide, with many thousands of known species. Because they evolved rapidly, and molted like other arthropods, trilobites serve as excellent index fossils. (Arthropods periodically shed their old exoskeletons, or molt.) An index fossil is one that is useful for dating and correlating the strata in which it is found.

The relationship between variables might be either directly porportional to each other or inversely proportional to each other. For instance, the current flowing is _directly_ proportional to the potential difference across it.

---------------------

Since I do not have the graph, I will propose two potential options and I will describe each of them.

I suggest you to choose the one that matches the shape of graph 3.

The current flowing through this component is __DIRECTLY__ proportional to the potential difference across it.

If this is the case of your graph, you should see the straight line crossing from the left inferior quadrant to the right superior one.

The direction of the line suggests that one of the variables increases as the other one increases too. The current increases as the potential increases.

This is the case of the Ohm's law.

The current flowing through this component is __INVERSELY__ proportional to the potential difference across it.

If this is the case of your graph, you should see the straight line crossing the right quadrant from the superior left corner to the inferior right one.

The direction of the line suggests that the variable represented in the Y ax decreases as the other one increases.

For instance, The current decreases as the potential increases. Or the potential decreases as the current increases.

In the attached files you will find graphs of both options.

-------------------------

You can learn more about the Ohm's law at  

https://brainly.com/question/17286882?referrer=searchResults

You can learn more about the relationship between variables at

https://brainly.com/question/16937826?referrer=searchResults

https://brainly.com/question/21627823?referrer=searchResults

Answer: The relationship between variables might be either directly proportional to each other or inversely proportional to each other. For instance, the current flowing is directly proportional to the potential difference across it.

Explanation:

Answer:

B

Explanation:

Simply take all forces pointing to the right of the box as positive and all of the forces pointing to the left of the box as negative and add all values.

ΣF = 7 + 18 + (-20) = 5N to the right