17. Kade has $40 in savings and wants to purchase a video game console that costs $250 plus
8.25% sales tax. Kade wants to wait until he has enough in savings to cover the purchase. If Kade
saves $50 each week, what is the minimum number of weeks Kade should wait before making his
purchase?
A. 3 weeks
B. 4 weeks
C. 5 weeks
D. 7 weeks

(a) The linear programming model to maximize the profit is written as,

Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)

(b) The optimal solution is x1 = 0, x2 = 8/3, x3 = 8, x4 = 0, and the maximum profit is $40.

(a) Linear programming model:

Let x1, x2, and x3 be the number of acres allocated to lemon, peach, and cherry trees, respectively. Then, the objective function we want to maximize is:

Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)

The first term represents the revenue from selling lemons, the second term represents the revenue from selling peaches, the third term represents the revenue from selling cherries, the fourth term represents the cost of fertilizer, and the last term represents the cost of labor.

The constraints are:

x1 + x2 + x3 ≤ 200 (total available land)

10x1 + 12x2 + 10x3 ≤ 20000 (total available labor hours)

x1, x2, x3 ≥ 0 (non-negativity constraints)

(b) Simplex algorithm:

Convert the linear programming model into standard form by introducing slack variables and expressing all variables in terms of these variables.

Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)

Subject to:

x1 + x2 + x3 + x4 = 200

10x1 + 12x2 + 10x3 + x5 = 20000

x1, x2, x3, x4, x5 ≥ 0

In this case, the entering variable is x1, as it has the highest coefficient in the objective function.

Step 5 (continued):

1.6 0.1 0 1 -48 32 <- Z

0.4 0.9 1 1/10 0 40 <- x1

8.4 3.3 0 -1/10 1 1840 <- x5

The entering variable is x3, as it has the highest coefficient in the objective function.

The leaving variable is x1, as it has the smallest ratio of RHS to its coefficient in the x3 column.

x2 x1/12 x3 x5/120 x4 RHS

2.5 1/5 0 -1/60 0 40 <- Z

0.5 -1/5 1 1/60 0 8 <- x3

0.5 2/15 0 1/60 1/10 8/3 <- x2

To know more about linear programming model here

https://brainly.com/question/28036767

#SPJ4

For the maximum volume of , the value of x must be smaller that is x = 2.90 inch. Size of square = 8.41 sq. in.

The issue is an application of maxima and minima, where the unknown quantity is located using the first derivative. Keep in mind that the height of a box is equal to a side of the cut square when the sides are bent upward. Moreover, the box formula's volume is

Volume = length * width * height

Given:

Volume of new box = (32 - 2x)(12 - 2x)x

Rearranging terms:

V = 4x³ - 88x² + 384x

For maximum volume, V' = 0 (first derivative)

V' = 12x² - 167x + 384

V' = 0

12x² - 167x + 384 = 0

Solve using quadratic formula:

x = [-b ± √(b² - 4ac)] / 2a

a = 12 , b = - 167 , c = 384

x = [167 ± √(167² - 4*384*12)] / 2*12

x =  [167 ± 7√193] / 24

Now,

x =  [167 + 7√193] / 24

x = 11.01 inch

and,

x = [167 - 7√193] / 24

x = 2.90 inch

For the maximum volume of , the value of x must be smaller that is x = 2.90 inch.

Size of square = x²

Size of square = 2.90²

Size of square = 8.41 sq. in.

Know more about the maxima and minima

https://brainly.com/question/29502088

#SPJ1

Subway ridership data can reveal useful patterns through calculations with multiple operators, informing decisions about infrastructure and scheduling to better serve riders' needs.

The subway ridership dataset can reveal a wealth of information through calculations with multiple operators. One such calculation is the average increase or decrease in ridership during specific time intervals. By comparing ridership during peak and off-peak hours or weekdays versus weekends, it is possible to determine when the subway system is busiest and when it is underutilized.

Another useful calculation is the average percentage change in ridership between different stations or subway lines. This can help identify the most popular stations or lines and can inform decisions about where to allocate resources and infrastructure improvements.

Additionally, it is possible to explore the correlation between ridership and other factors such as weather, events, or holidays. By analyzing how ridership fluctuates in response to external factors, transportation planners can adjust schedules and routes to better serve the needs of riders.

Calculations with multiple operators can also reveal patterns in ridership based on time of year or day of the week. By analyzing the average change in ridership on different days or months, transportation planners can make informed decisions about scheduling and staffing.

Finally, regression analysis can be used to identify the overall trend in ridership over time. By examining long-term ridership trends, transportation planners can identify areas for improvement and plan for future infrastructure projects to better meet the needs of subway riders.

Learn more about Calculation

brainly.com/question/30151794

#SPJ11

We the best reason behind why we call National halothane study is an observational study rather than an experiment is: " In order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned." So, option( b) is right one.

We have data from the National Halothane Study that correlates with important research into the safety of anesthetics used in surgery. The above shows the death rate and aesthetic. There is a relationship between the anesthetic used and the death of the patient. The data was collected after that the anesthesia was administered is started. In the observational study, interesting observer in the subjects & any treatment that the subjects recive are beyond the council of the investigators. Here the motion of anaesthesia is anesthetics used her determined by the doctors and the investigators are simply observing. So, it is an observational study due to because in order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned. Instead, a patient's anesthetic is selected by his or her doctor(s).

For more information about observational study, visit :

https://brainly.com/question/14393640

#SPJ4

Complete question:

The National Halothane Study was a major investigation of the safety of anesthetics used in surgery. Records of over 850,000 operations performed in 34 major hospitals showed the following death rates for four common anesthetics:27 Anesthetic A Death rate B CD 1.7% 1.7% 3.4% 1.9% There is a clear association between the anesthetic used and the death rate of patients. Anesthetic C appears dangerous.

a) in order to be an experiment, the subjects would have to be randomly selected from the population. however, these are hospital patients who all have some disease or condition and have not been randomly selected from the population, which includes both healthy and sick people.

b) in order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned. instead, a patient's anesthetic is selected by his or her doctor(s).

c) there is not enough information to say for sure, but it is safer to assume that it is only an observational study, so that we are not overconfident about the results.

d) actually, it is an experiment and not an observational study.

The depreciation rate of Nancy is 15%.

Depreciation is the reduction in the value of an asset over time due to wear and tear, obsolescence, or other factors. It is a non-cash expense that is recorded on a company's income statement, which reflects the decrease in the asset's value during its useful life. Depreciation is commonly used in accounting to allocate the cost of an asset over its useful life, and it helps businesses to accurately reflect the true value of their assets on their financial statements.

In mathematics, a function is a relation between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output.

The given function V(t) = [tex](30000*0.85)^{t}[/tex]represents the value of Nancy's car after t years.

Depreciation rate is the rate at which the value of an asset decreases over time. In this case, the depreciation rate of Nancy's car is 1 - 0.85 = 0.15 or 15%.

Learn more about depreciation here:

https://brainly.com/question/17827672

#SPJ1

The inference is that,  Incorrect because of a failure to distinguish between incidence and prevalence.

What is inference drawn from statistics?

Utilising data analysis to determine characteristics of a probability distribution at play, statistical inference is the process. Through the use of estimation and hypothesis testing, inferential statistical analysis infers characteristics of a population. It is presumed that a bigger population than the observed data set was sampled for this data collection.

What distinguishes random assignment from random sampling inferences?

As a method of choosing participants for your study's sample, random selection or random sampling can be used. The sample can be divided into control and experimental groups using random assignment, however.

Learn more about inference

brainly.com/question/29774121

#SPJ1

The complete question is -

At the initial examination in the Framingham study, coronary heart disease was found in 5 per 1,000 men aged 30yrs to 44yrs and in 5 per 1,000 women aged 30yrs to 44yrs. The inference that in this age group men and women have an equal risk of developing coronary heart disease is Selected Answer: A. Correct Answers: A. Correct B. Incorrect because of a failure to distinguish between incidence and prevalence C. Incorrect because a proportionate ratio is used when a rate is required to support the inference D. Incorrect because of failure to recognize a possible cohort phenomenon E. Incorrect because there is no control or comparison group.

Answer: 14%

Step-by-step explanation:

Our formula is i=prt but we're trying to find the rate (r) so we'll rearrange it to become r=i/pt.

i = $245

p = $7000

t = 3/12= 0.25 years

[tex]r=\frac{245}{(7000)(0.25)} \\r = 0.14[/tex]

Answer:

Can i see the full answer so I can help you?

Step-by-step explanation:

The probability that the sample mean would differ from the population mean by greater than 3 millimetres is 0.0033 + 0.0033 = 0.0066, rounded to four decimal places.

We are given that the population mean diameter of the steel bolts manufactured by Thompson and Thompson is μ = 137 millimeters and the variance is = 49.

We need to find the probability that the sample mean would differ from the population mean by greater than 3 millimeters.

The standard deviation of the sample means is given by the formula:

[tex]\sigma_{\bar{x}} = \frac{\sigma}{{\sqrt{n}}}[/tex]

Substituting the given values, we have:

[tex]\sigma \bar{x}=\frac{\sqrt{49}}{\sqrt{48}}=1.118[/tex]

To find the probability that the sample mean would differ from the population mean by greater than 3 millimeters,

we need to calculate the z-score:

[tex]z=\frac{(\bar{x}-\mu)}{ \sigma _{\bar{x}}}[/tex]

Substituting the given values, we have:

[tex]z=\frac{\bar{x}-137}{1.118}[/tex]

We want to find the probability that |z| > 3/1.118 = 2.683.

Using a standard normal distribution table, we find that the probability of z > 2.683 is 0.0033.

Since this is a two-tailed test, the probability of z < -2.683 is also 0.0033.

For more questions on standard normal distribution table

https://brainly.com/question/1846009

#SPJ11

Using a trigonometric relation we can see that the correct option is the last one;

4. 348.5 ft​

We have a right triangle, so we can use trigonometric relations.

The angle at the top of the triangle is a, and it must solve the equation:

a + 19° = 90°

a = 90° - 19° = 71°

Now we can use the trigonometric relation:

tan(a) = (opposite cathetus)/(adjacent cathetus)

REplacing what we know:

tan(71) = ?/120 ft

120ft*tan(71) = ? = 348.5ft

That is the distance.

Learn more about right triangles at:

https://brainly.com/question/2217700

#SPJ1

this is "Repeated measures ANOVA, which is a statistical test used to analyze data from experiments in which the same participants are measured multiple times under different conditions.

A repeated measures ANOVA is a statistical test used to analyze data from experiments in which the same participants are measured multiple times under different conditions. This design is sometimes referred to as a "within-subjects design" because each participant is measured within the same group.

Here are the steps for conducting a repeated measures ANOVA:

Learn more about  ANOVA

brainly.com/question/24157862

#SPJ11

All the possible angle measures are given as follows:

25º and 35º.

The three trigonometric ratios are the sine, the cosine and the tangent, and they are defined as follows:

On the first quadrant, we have that:

More can be learned about trigonometric ratios at brainly.com/question/24349828

#SPJ1

Answer:

A = 40 in²

Step-by-step explanation:

the area (A) of a trapezoid is calculated as

A = [tex]\frac{1}{2}[/tex] h (b₁ + b₂)

where h is the height between the bases b₁ and b₂

here h = 8 , b₁ = 4 , b₂ = 6 , then

A = [tex]\frac{1}{2}[/tex] × 8 × (4 + 6)

   = 4 × 10

   = 40 in²

Answer: 228 yards

Step-by-step explanation:

Answer:

228

Step-by-step explanation:

Answer:

To find the volume of a rectangular prism, we need to multiply its length, width, and height.

The given dimensions are:

Length = 9 yd

Width = Pyd (it's unclear what this means, so let's assume it's a typo and the intended value is 3 yd or 4 yd)

Height = 4 yd

Assuming the width is 3 yd, the volume of the rectangular prism is:

Volume = Length x Width x Height

Volume = 9 yd x 3 yd x 4 yd

Volume = 108 cubic yards

Assuming the width is 4 yd, the volume of the rectangular prism is

Volume = Length x Width x Height

Volume = 9 yd x 4 yd x 4 yd

Volume = 144 cubic yards

Therefore, the volume of the rectangular prism is either 108 cubic yards or 144 cubic yards, depending on the intended value of the width.

It has been proved that the lines MN and PR are parallel because they have the same slope.

We are given the coordinates of the points P, Q and R as:

P(-3, -6)

Q(1, 4)

R(5, -2)

Since M is the midpoint of PQ, we have:

M = (-3 + 1)/2, (-6 + 4)/2

M = (-1, -1)

N is the midpoint of QR and so:

N = (1 + 5)/2, (4 - 2)/2

N = (3, 1)

Slope of MN = (1 + 1)/(3 + 1) = 1/2

Slope of PR = (-2 + 6)/(5 + 3)

Slope of QR = 4/8 = 1/2

Both slopes are equal and as such they are parallel lines

Read more about parallel lines at: https://brainly.com/question/29056723

#SPJ1

V=π(d

2)2h=π·(20.12

2)2·6.4≈2034.42618m

The measure of angle A and angle B are 28.61 and 61.39 rounded to two decimal place, using trigonometric ratio of tangent for the respective angles.

The trigonometric ratios is concerned with the relationship of an angle of a right-angled triangle to ratios of two side lengths.

The basic trigonometric ratios includes;

sine, cosine and tangent.

tan B = 6/11 {opposite/adjacent}

B= tan⁻¹(6/11) {cross multiplication}

B = 28.6105.

tan A = 11/6 {opposite/adjacent}

A= tan⁻¹(11/6) {cross multiplication}

A = 61.3895.

Therefore, the measure of angles A and B are 28.61 and 61.39 rounded to two decimal place, using trigonometric ratio of tangent for the respective angles.

Read more about trigonometric ratios here: https://brainly.com/question/11967894

#SPJ1

The major flaw of the linear probability model is, Option d, which allows predicted values to range from above 1 to below 0

The binary dependent variable, which accepts values of 0 and 1, and the independent variables are assumed to have a linear relationship under the linear probability model.

The anticipated values from the linear probability model, however, can range from 0 to 1, and in some circumstances, they can be either above or below 0. This goes against the dependent variable's probabilistic character and can produce inaccurate forecasts.

To know more about Linear probability, visit,

https://brainly.com/question/28013612

#SPJ4

In the circle the mesaure of ∠ACF is  7

The distance from the centre of a circle to any point on the boundary is called the radius. The radius is half of the diameter; 2r=d 2 r = d . The line segment that joins two points on the circle is a chord.

If diameter of a circle bisects a chord ,then it must be perpendicular to the chord.

∴ m∠ACF = 90°  

(8x + 34)° = 90°

8x = 90 - 34

x = 56/8

x = 7

Hence,mesaure of ∠ACF = 7

Complete question : In Circle C, the diameter AB bisects the chord EF.

If m∠ACF = (8x+34)°, enter in the correct value of x.

Learn more about Chord here

https://brainly.com/question/21686011

#SPJ1

Answer:

use desmos graphing calculator it helps alot

Step-by-step explanation:

x^{2}-x-6=0 has two zeros/solutions

x^{2}-x-6=0 has 1 zero/solution

x^{2}-x-6=0 has no zero/solution

Using simple interest we know the Total value of annual health coverage is $9000.

Borrowers must pay lenders simple interest as a fee in exchange for a loan.

Compound interest is excluded from the calculation and just the original principal is used.

Simple interest applies to all loans, not just specific ones.

Additionally, it refers to the kind of interest that banks give their customers on their savings accounts.

So, complete yearly health coverage calculation

Let x be the total annual healthcare budget.

Ruth contributes 18% of the entire cost of healthcare, or $67.50 for two weeks. (ie 15 days)

So, total paid for one month = 67.5 x 2 = 135

The total amount paid for the entire year is 135 x 12 = 1620.

She foots 18% of the overall annual health care costs, as was already established.

Then,

18% x = 1620

18 x / 100 = 1620

x = (1620 x 100) / 18

= $9000

Therefore, using simple interest we know the Total value of annual health coverage is $9000.

Know more about simple interest here:

https://brainly.com/question/25793394

#SPJ1

Correct question:

Ruth contributes 18% of the total cost of her individual health care. This is a $67.50 deduction from each of her biweekly paychecks. What is the total value of her individual coverage for the year?

Answer:

31.4 cm

Step-by-step explanation:

Circumference of circle = D x π

D = 10 cm

π = 3.14

Let's solve

10 x 3.14 = 31.4 cm

So, the circumference of the circle is 31.4 cm

The probability that at most 70 switches fail during the first year is low, at around 1.3%.

The problem involves the use of the exponential distribution to model the lifetime of a certain type of electrical switch. Specifically, we are given that the average life of these switches is beta = 3.

The exponential distribution is often used to model the time between occurrences of a certain event, such as the failure of a component. In this case, we can use it to model the time between failures of the electrical switches.

To answer the question, we need to find the probability that at most 70 switches fail during the first year. Let X be the number of switches that fail during the first year. We know that X follows a Poisson distribution with parameter lambda = (1/3)*300 = 100.

This is because the expected number of failures per year for each switch is 1/3 (since the average life is 3 years), and there are 300 switches installed.

Therefore, we can use the Poisson distribution to calculate the probability that at most 70 switches fail during the first year:

P(X <= 70) = e^(-100) * (100^0/0!) + e^(-100) * (100^1/1!) + ... + e^(-100) * (100^70/70!)

This can be calculated using a calculator or software such as Excel. The answer is approximately 0.013, or 1.3%. This suggests that the switches are fairly reliable, and that it is unlikely that a large number of them will fail in a short period of time.

To learn more about distribution click on,

https://brainly.com/question/13747500

#SPJ4

If there are 90 pens in a box and 36 of them are red and the rest of them are black, the ratio of red pens to black pens in the box is 2:3.

The ratio of red pens to black pens in the box can be expressed as a fraction or as a simplified ratio. To do this, we need to determine the number of black pens in the box.

We know that there are 90 pens in total, and 36 of them are red. Therefore, the number of black pens can be found by subtracting the number of red pens from the total:

90 pens - 36 red pens = 54 black pens

Now we know that there are 54 black pens and 36 red pens in the box. To express this as a ratio, we can simplify it by dividing both numbers by their greatest common factor (GCF), which in this case is 18:

36/18 : 54/18

Simplifying further, we get:

2:3

This means that for every 2 red pens, there are 3 black pens in the box.

To learn more about ratio click on,

https://brainly.com/question/7414039

#SPJ4

the correct answer is A.

5,220,000 songs were downloaded in the year 2020.

The interpretation of s(2020) = 5,220,000 is "5,220,000 songs were downloaded in the year 2020".

Therefore, the correct answer is A. 5,220,000 songs were downloaded in the year 2020.

Interpretation refers to the process of explaining or giving meaning to information, data, or phenomena. It involves analyzing and making sense of information to draw conclusions or make decisions based on the findings.

Interpretation can involve subjective judgment and may depend on the perspective, assumptions, or biases of the interpreter.

to know more about interpretation

brainly.com/question/30932003

#SPJ1

The diameter of the circle is √74. Answer: C.

What is circle?

A circle is a geometric shape that consists of all points in a plane that are equidistant from a fixed point called the center. It can also be defined as the set of points that are a fixed distance (called the radius) away from the center point.

To find the diameter of the circle, we need to find the distance between points A and B, which will give us the length of the diameter.

Using the distance formula, we have:

d = √[(x2 - x1)² + (y2 - y1)²]

where (x1, y1) = (-3, 6) and (x2, y2) = (-8, -1).

Plugging in the values, we get:

d = √[(-8 - (-3))² + (-1 - 6)²]

= √[(-5)² + (-7)²]

= √[25 + 49]

= √74

Therefore, the diameter of the circle is √74. Answer: C.

To learn more about circle from the given link:

https://brainly.com/question/29142813

#SPJ1

Answer:

Using similar triangles, we can set up a proportion:

(tree height)/(tree shadow) = (building height)/(building shadow)

Plugging in the given values, we get:

8/4 = 24/x

Solving for x, we get:

x = (24 x 4)/8 = 12 feet

Therefore, the length of the building's shadow is B. 12 feet.

So, the matrix representation of T relative to the basis B = {f1, t, t²} is:
| 2.5  3  0 |
|  0   4  0 |
|  0   0  6 |

To find the matrix representation of the linear transformation T relative to the basis B = {f1, t, t²}, we need to apply T to each element of the basis and then express the result as a linear combination of the basis elements.
Let's apply T to each element of the basis B:
1. T(f1) = T(1) = 2(1) + 0.5(1) = 2.5
2. T(t) = T(c) = 3(c) + 4(c²) = 3f1 + 4t
3. T(t²) = T(c²) = 6(c²) = 6t²
Now, we can express the results as linear combinations of the basis elements:
1. T(f1) = 2.5f1 + 0t + 0t²
2. T(t) = 3f1 + 4t + 0t²
3. T(t²) = 0f1 + 0t + 6t²
Finally, we can form the matrix representation of T relative to the basis B by using the coefficients of the linear combinations as the columns of the matrix:
T matrix = | 2.5  3  0 |
                  |  0   4  0 |
                  |  0   0  6 |

Learn more about linear combinations here:

https://brainly.com/question/8502289

#SPJ11

The matrix representation of t with respect to the basis b = [tex]{f1, t, t^2}[/tex] is:

[1/2   -4/3      1 ]

[1       8/3      0 ]

[0     -5/2   3/2 ].

To find the matrix representation of the linear transformation t with respect to the given basis, we need to apply t to each of the basis vectors and represent the result as a linear combination of the basis vectors.

The coefficients of these linear combinations will form the columns of the matrix representation.

First, we apply t to each of the basis vectors:

[tex]t(1) = a0 + a1t + a2t^2 = a0 + a1f1 + a2t - (a1/2)f1 - (3a2/2)t^2[/tex]

[tex]t(t) = a0 + (4/3)a1t + (5/6)a2/t = a0 + (4/3)t + (5/6)t^2 - (4/3)f1 - (5/2)t^2[/tex]

[tex]t(t^2) = a0 + (3/2)a2/t^3 = a0 + (3/2)t^2 - (3/2)f1[/tex]

Next, we represent these results as linear combinations of the basis vectors:

[tex]t(1) = (a0 - a1/2)f1 + (a1 + a2)t - (3a2/2)t^2[/tex]

[tex]= 1f1 + 0t + 0t^2 + (-1/2)f1 + 1t + 0t^2 + 0f1 - (3/2)t^2[/tex]

[tex]= (1/2)f1 + 1t - (3/2)t^2[/tex]

[tex]t(t) = (-4/3)f1 + (a0 + 4/3)t + (5/6)t^2[/tex]

[tex]= 0f1 + 1t + 0t^2 + (-4/3)f1 + (4/3)t + (5/6)t^2 + 0f1 + 0t - (5/2)t^2[/tex]

[tex]= (-4/3)f1 + (8/3)t - (5/2)t^2[/tex]

[tex]t(t^2) = f1 + (a0 - 3/2)t^2[/tex]

[tex]= 0f1 + 0t + 1t^2 + 1f1 + 0t + 0t^2 + 0f1 + (1/2)t^2[/tex]

[tex]= 1f1 + 0t + (3/2)t^2[/tex]

For similar question on matrix.

https://brainly.com/question/2456804

#SPJ11