(a) Coils are located 31.58 cm away from the mirror.
(b) Magnification is -9.50, indicating an inverted image, and the large magnitude helps spread out the reflected energy for effective heating.
(a) We can use the mirror equation to solve for the distance of the object (coils) from the mirror:
1/f = 1/do + 1/di
where f is the focal length (half the radius of curvature), do is the distance of the object from the mirror, and di is the distance of the image from the mirror.
Substituting the given values, we get:
1/25 = 1/do + 1/300
Solving for do, we get:
do = 31.58 cm
So the coils are 31.58 cm away from the mirror.
(b) The magnification, M, is given by:
M = -di/do
Substituting the given values, we get:
M = -3.00 m / 0.3158 m
M = -9.50
The negative sign indicates that the image is inverted. The large magnitude of the magnification means that the reflected energy is spread out over a large area, making the heater more effective at heating a room.
Learn more about Magnification
https://brainly.com/question/31595015
#SPJ4
Which of these objects is an insulator?
b. copper coin
d. steel fork
a. gold ring
C. glass rod
Answer:
C
Explanation:
Glass is one of the objects included in an insular so glass rod will be the final ans.
A wire, of length L = 3. 8 mm, on a circuit board carries a current of I = 2. 54 μA in the j direction. A nearby circuit element generates a magnetic field in the vicinity of the wire of B = Bxi + Byj + Bzk, where Bx = 6. 9 G, By = 2. 6 G, and Bz = 1. 1 G. A) Calculate the i component of the magnetic force Fx, in newtons, exerted on the wire by the magnetic field due to the circuit element.
B) Calculate the k component of the magnetic force Fz, in newtons, exerted on the wire by the magnetic field due to the circuit element.
C) Calculate the magnitude of the magnetic force F, in newtons, exerted on the wire by the magnetic field due to the circuit element
The i component of the magnetic force on the wire is 1.06 × 10^-13 N. The k component of the magnetic force on the wire is 6.69 × 10^-14 N. The magnitude of the magnetic force on the wire is 1.26 × 10^-13 N.
To calculate the i component of the magnetic force, we use the formula:
F = I * L x B
where I is the current, L is the length of the wire, B is the magnetic field, and x represents the cross product.
The cross product of L and B gives a vector perpendicular to both L and B, which is in the i direction. So we only need to find the magnitude of the cross product and multiply it by I to get Fx.
|L x B| = |L| |B| sinθ
where θ is the angle between L and B. Since L is in the j direction and B has i and k components, we have:
|L x B| = L * Bz = (3.8 × 10^-3 m) * (1.1 × 10^-4 T) = 4.18 × 10^-8 N
Then, Fx = I * |L x B| = (2.54 × 10^-6 A) * (4.18 × 10^-8 N) = 1.06 × 10^-13 N
To calculate the k component of the magnetic force, we use the same formula and take the k component of the cross product:
|L x B|k = |L| |B| sin(π/2) = |L| |B| = (3.8 × 10^-3 m) * (6.9 × 10^-5 T) = 2.63 × 10^-7 N
Then, Fz = I * |L x B|k = (2.54 × 10^-6 A) * (2.63 × 10^-7 N) = 6.69 × 10^-14 N
The magnitude of the magnetic force is given by,
F = sqrt(Fx^2 + Fz^2) = sqrt((1.06 × 10^-13 N)^2 + (6.69 × 10^-14 N)^2) = 1.26 × 10^-13 N
To know more about magnetic force, here
brainly.com/question/3160109
#SPJ4
A 75. 0-kg ice skater moving at 10. 0 m/s crashes into a stationary skater of equal mass. After the collision, the two skaters move as a unit at 5. 00 m/s. Suppose the average force a skater can experience without breaking a bone is 4 500 N. If the impact time is 0. 100 s, does a bone break?
In this case, a skater can experience without breaking a bone (4,500 N), a bone will not break in this collision.
We can use conservation of momentum to calculate velocity of skaters after collision:
[tex](m1 * v1) + (m2 * v2) = (m1 + m2) * vf[/tex]
Plugging in the values, we get:
[tex](75.0 kg * 10.0 m/s) + (75.0 kg * 0 m/s) = (75.0 kg + 75.0 kg) * 5.00 m/s \\750.0 kgm/s = 750.0 kgm/s[/tex]
Therefore, the velocity after collision is 5.00 m/s.
We can use the impulse-momentum theorem:
J = Δp = F * Δt
Δp = (m1 + m2) * vf - (m1 * v1 + m2 * v2)
[tex]= (75.0 kg + 75.0 kg) * 5.00 m/s - (75.0 kg * 10.0 m/s + 75.0 kg * 0 m/s) \\= 750.0 kgm/s - 750.0 kgm/s \\= 0 kg*m/s[/tex]
Thus, the force exerted on the skaters during the collision is:
F = J / Δt
= 0 / 0.100 s
= 0 N
Since the force exerted on the skaters during the collision is zero, a skater can experience without breaking a bone.
To know more about impulse-momentum, here
brainly.com/question/904448
#SPJ4
a hair drier uses 8 a at 114 v. it is used with a transformer in england, where the line voltage is 237 v. what should be the ratio of the turns of the transformer (primary to secondary)?
To determine the ratio of turns of the transformer, we can use the principle of conservation of power, which states that power in equals power out in an ideal transformer.
The power input to the hair dryer is:
P = VI = (8 A)(114 V) = 912 W
The power output of the transformer should be the same as the input power, so we can use this equation to find the current in the secondary circuit:
P = VI = (I_s)(237 V)
where I_s is the current in the secondary circuit. Solving for I_s, we get:
I_s = P/V_s = (912 W)/(237 V) = 3.85 A
Now we can use the turns ratio equation to find the ratio of the turns in the transformer:
N_p/N_s = V_p/V_s = (114 V)/(237 V)
where N_p and N_s are the number of turns in the primary and secondary coils, respectively. Solving for N_p/N_s, we get:
N_p/N_s = 0.481
Therefore, the ratio of turns in the transformer should be approximately 0.481.
To know more about conservation of power :
https://brainly.com/question/9013890
#SPJ11
As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. this is called
As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. This is called the "gravitational wobble" or "stellar wobble".
As a planet orbits a star, it follows an elliptical path due to the gravitational pull of the star. The shape of the planet's orbit is determined by the balance between the gravitational force of the star and the planet's own motion. However, the planet's gravity also affects the star, causing it to move slightly in response to the planet's pull. This motion of the star is much smaller than that of the planet, but it is still measurable and can be observed. This phenomenon is known as the planet's gravitational influence on the star, which causes the star to wobble slightly. This effect is used by astronomers to detect and study exoplanets orbiting distant stars.
To learn more about gravitational wobble, refer:-
https://brainly.com/question/31168966
#SPJ11
The phenomenon that occurs when a planet orbits a star, causing both the planet and the star to make elliptical motions due to their mutual gravitational effects.
This phenomenon is known as the "wobble" or "stellar wobble" and is caused by the gravitational interaction between a planet and its star. As a planet orbits a star, it exerts a gravitational force on the star, causing it to move slightly in response. This movement results in a small, periodic shift in the star's spectral lines, which can be detected by astronomers.
By analyzing this shift, astronomers can determine the presence, size, and orbital characteristics of planets around other stars. At the same time, the planet's gravity also affects the star, causing the star to make a smaller elliptical motion in response. This mutual gravitational interaction results in the observed stellar wobble.
To know more about stellar wobble:
https://brainly.com/question/29542172
#SPJ11
a 1 meter long solenoid with 200 turns carries 2a of current . calculate the magnetic field on axis.
The magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.
The magnetic field on the axis of a solenoid can be calculated using the formula:
B = μ₀ * n * I
Where B denotes the intensity of the magnetic field, 0 denotes the permeability of empty space, n denotes the number of turns per unit length, and I is the current flowing through the solenoid.
In this case, the solenoid is 1 meter long and has 200 turns, so n = 200 turns / 1 meter = 200 turns/meter. The solenoid is delivering 2A of current.
The value of μ₀ is a constant, equal to 4π × 10⁻⁷ T·m/A
When we enter these values into the formula, we get:
B = μ₀ * n * I
= 4π × 10⁻⁷ T·m/A * 200 turns/m * 2A
= 5.03 × 10⁻⁴ T
Therefore, the magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.
Learn more about magnetic field
https://brainly.com/question/14848188
#SPJ4
magnetic field on the axis of the solenoid is approximately 0.005 T
Solution - Hi! To calculate the magnetic field on the axis of a solenoid, you can use the formula:
Magnetic field (B) = μ₀ * n * I . (applicable for ideal long solenoid)
where μ₀ is the permeability of free space (approximately 4π x 10^-7 Tm/A), n is the number of turns per unit length, and I is the current.
In your case, the solenoid is 1 meter long with 200 turns and carries a 2 A current. To find n, divide the number of turns by the length:
n = 200 turns / 1 m = 200 turns/m
Now, plug the values into the formula:
B = (4π x 10^-7 Tm/A) * (200 turns/m) * (2 A)
B ≈ 0.005 T
The magnetic field on the axis of the solenoid is approximately 0.005 T (Tesla).
To learn more about solenoid, click on this
brainly.com/question/22043434
#SPJ11
What does it mean when we say our sense of motion depends on our frame of reference? Include the phrases “fixed frame” and “moving frame” in your answer.
frame of reference that is not inertial. A non-inertial frame is now defined as a frame that accelerates relative to the underlying inertial reference frame. Newton's law won't be valid.
How does the framework function?
Performance could change depending on the lighting. The Frame automatically modifies the Plasma tvs brightness and contrasting settings after analyzing the lighting conditions in the room and the light level of your content.
What distinguishes a system from a frame?
the hard architecture (bones and condyle) that serves as an animal's body's framework. skeletal system, skeleton, and systema skeletale. system: a collection of organs or bodily parts that function or are anatomically related; "the body contains a system for organs for digestion."
To know more about frame visit:
https://brainly.com/question/9708057
#SPJ1
polaris and the star at the other end of the little dipper, kochab, are both apparent magnitude 2. in a photo of the night sky, they would appear similar to how they appear here in a planetarium simulation: larger than other stars. this is because
Polaris and Kochab's apparent magnitude of 2 and their proximity to the celestial pole make them appear larger in a photo or planetarium simulation compared to other stars.
A comparatively brilliant star as compared to other stars in the night sky, Kochab and Polaris both have an apparent magnitude of 2, making them both bright stars. In addition, they are both close to the celestial pole, which gives them a motionless appearance in the sky while giving the impression that other stars are rotating around them.
They stand out in the night sky because of their fixed location and brightness, and because of their brightness and proximity to the celestial equator, they look bigger than other stars in pictures or planetarium simulations.
Learn more about planetariums:
https://brainly.com/question/23119731
#SPJ4
A nurse is caring for a client who is in labor and has an epidural anesthesia block. The client's blood pressure is 80/40 mmHg and the fetal heart rate is 140/min. Which of the followign is the priority nursing action?
A. Elevate the client's legs.
B. Monitor vital signs every 5 min.
C. Notify the provider.
D. Place the client in a lateral position.
The priority nursing action in this scenario would be to notify the provider.
An epidural anesthesia block can cause a drop in blood pressure in the mother, which can in turn affect the fetal heart rate.
A blood pressure reading of 80/40 mmHg is considered low, and can indicate hypotension.
Hypotension can lead to decreased blood flow to the placenta and fetus, which can result in fetal distress.
Therefore, it is important for the provider to be notified of the low blood pressure reading and fetal heart rate, so that appropriate interventions can be implemented to address the situation.
The provider may choose to adjust the dosage of the epidural anesthesia, administer IV fluids, or consider other measures to stabilize the mother's blood pressure and fetal well-being.
While monitoring vital signs and positioning the client can also be important interventions, they are not the priority in this scenario.
Elevating the client's legs may help to increase blood flow to the heart and improve blood pressure, and placing the client in a lateral position may also help to improve blood flow and prevent supine hypotensive syndrome.
These actions should be taken after the provider has been notified and appropriate interventions have been implemented.
To know more about epidural anesthesia visit link :
https://brainly.com/question/14205576
#SPJ11
it takes light approximately 8 minutes to reach the earth from the surface of the sun. the distance between jupiter and the sun is five astronomical units (5 au). how long does it take light to travel that distance?
It takes light approximately 39.5 minutes to travel the distance from the Sun to Jupiter.
Since it takes light approximately 8 minutes to reach the Earth from the surface of the sun, we know that the distance between the sun and the Earth is 1 astronomical unit (1 au).
Therefore, to find out how long it takes light to travel 5 au (the distance between Jupiter and the sun), we can use the following formula:
time = distance ÷ speed of light
The speed of light is approximately 299,792,458 meters per second.
So,
time = 5 au x 149,597,870,700 meters/au ÷ 299,792,458 meters/second
time = 39.5 minutes
Therefore, it takes approximately 39.5 minutes for light to travel from the surface of the sun to Jupiter.
Know more about astronomical unit here:
https://brainly.com/question/15211176
#SPJ11
waves on a particular string travel with a velocity of 10 m/s. a high-speed photograph shows that successive peaks are 0.50 m apart along the string. the frequency of the waves is:
The frequency of the waves on the string is 20 Hz.
The velocity of waves on a string is given by the equation:
v = λf
where v is the velocity of the wave, λ is the wavelength, and f is the frequency of the wave.
We are given that the velocity of waves on the string is 10 m/s and that successive peaks (or troughs) are 0.50 m apart. This distance is equal to the wavelength (λ) of the wave. Therefore, we can write:
λ = 0.50 m
Substituting this value and the given velocity into the equation above, we get:
10 m/s = (0.50 m) f
Solving for f, we get:
f = 10 m/s / 0.50 m = 20 Hz
To know more about Velocity:
https://brainly.com/question/30559316
#SPJ4
how fast must a nonrelativistic electron move so its de broglie wavelength is the same as the wavelength of a 3.4-ev photon?
Answer:
1990.47 m/s
Explanation:
Answer: the answer is in the screen shots
Explanation:
what is the wavelength of a radio photon from an am radio station that broadcasts at 1270 kilohertz? express your answer to three significant figures and include the appropriate units.
The wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz is 236 meters.
To find the wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz, we can use the formula:
wavelength (λ) = speed of light (c) / frequency (f)
1. First, we need to convert the frequency from kilohertz to hertz:
1270 kilohertz = 1270 * 10³ hertz = 1,270,000 hertz
2. Next, we will use the speed of light, which is approximately 3.00 * 10⁸ meters per second (m/s).
3. Now, we can plug in the values into the formula:
wavelength (λ) = (3.00 * 10⁸ m/s) / (1,270,000 Hz)
4. Calculate the wavelength:
λ ≈ 236.22 meters
5. Finally, express the answer to three significant figures and include the appropriate units:
λ ≈ 236 meters
Learn more about wavelength:
https://brainly.com/question/10750459
#SPJ11
a motorcycle passing by your apartment emits a sound with an intensity level of 70 db. if two identical motorcycles passed by together, what would be the intensity level of the resulting sound?
The intensity level of the resulting sound is approximately 73 dB, the correct option is (e)
To calculate the intensity level of the resulting sound, we use the formula:
L = 10 log(I ÷ I0)
where L is the intensity level in decibels, I is the intensity of the sound wave in watts per square meter, and I0 is the reference intensity, which is equal to 1 x 10⁻¹² watts per square meter.
Since the motorcycles emit identical sound waves, the intensity of each wave is the same. We can calculate the intensity of a single motorcycle's sound wave using the formula:
I = [tex](10^{L/10} )[/tex] x I0
where L is the intensity level of the sound wave in decibels. Substituting L = 70 dB and I0 = 1 x 10⁻¹² watts per square meter, we get:
I = (10⁷) x 1 x 10⁻¹²
= 1 x 10⁻⁵ watts per square meter
To calculate the intensity level of the resulting sound, we use the formula:
L = 10 log(2I ÷ I0)
where 2I is the intensity of the sound waves produced by two identical motorcycles. Substituting I = 1 x 10⁻⁵ watts per square meter and I0 = 1 x 10⁻¹² watts per square meter, we get:
2I = 2 x 1 x 10⁻⁵
= 2 x 10⁻⁵ watts per square meter
L = 10 log(2 x 10⁻⁵ ÷ 1 x 10⁻¹²)
= 10 log(2 x 10⁷)
= 10 (7.301)
= 73.01 dB
Therefore, the correct option is (e)
To learn more about intensity follow the link:
https://brainly.com/question/17583145
#SPJ4
The complete question is:
A motorcycle passing by your apartment emits a sound with an intensity level of 70 dB. If two identical motorcycles passed by together, what would be the intensity level of the resulting sound?
a. 80 dB
b. 140 dB
c. 103 dB
d. 70 dB
e. 73 dB
the magnetic force per meter on a wire is measured to be only 55% of its maximum possible value. what is the angle between the wire and the magnetic field?
The angle between the wire and the magnetic field is approximately 33.6 degrees.
To find the angle between the wire and the magnetic field, we will use the following formula for the magnetic force per meter on a wire:
F = BIL sin(θ)
where F is the magnetic force per meter, B is the magnetic field strength, I is the current flowing through the wire, L is the length of the wire, and θ is the angle between the wire and the magnetic field.
Given that the magnetic force is only 55% of its maximum possible value, we can write the equation as:
0.55 * F_max = BIL sin(θ)
The maximum force occurs when sin(θ) = 1, which means:
F_max = BIL
Now, we can substitute F_max back into our first equation:
0.55 * BIL = BIL sin(θ)
Now, divide both sides by BIL:
0.55 = sin(θ)
Finally, to find the angle θ, take the inverse sine (sin^(-1)) of both sides:
θ = sin^(-1)(0.55)
θ ≈ 33.6 degrees
So approximately 33.6 degrees is the angle between the wire and the magnetic field.
More on magnetic field: https://brainly.com/question/15567206
#SPJ11
what focal length of corrective lens should this person use to make the far point distance infinite?
To determine the focal length of a corrective lens required to make the far point distance infinite, we need to follow these steps:
1) Measure the person's far point distance: This can be done by having the person read letters on an eye chart or by using a refractometer.
Let's assume the person's far point distance is 3 meters.
2) Determine the person's current corrective lens prescription: If the person already wears corrective lenses, their current prescription can be used to calculate the required focal length of the corrective lens.
If they do not wear corrective lenses, this step can be skipped.
3) calculate the person's current refractive error: This can be done by subtracting the measured far point distance from infinity (1/∞) and converting the result to diopters.
For example, if the person's far point distance is 3 meters, their refractive error would be -0.33 diopters (1/3m = 0.33 D).
4) Determine the focal length of the corrective lens required to make the far point distance infinite: This can be done by adding the person's refractive error to the desired focal length of infinity (1/0 = 0 D).
For example, if the person's refractive error is -0.33 diopters, the required focal length of the corrective lens would be 0.33 meters or 33 centimeters.
Therefore, the person would need a corrective lens with a focal length of 33 centimeters to make their far point distance infinite.
To know more about focal length of a corrective lens :
https://brainly.com/question/13885819
#SPJ11
. Ima shoved a box horizontally over the end of a cliff. The initial velocity was 10m/s and it took 5.4s to hit
the ground.
+ How tall was the cliff?
+ How far away from the base of the cliff did the box fall?
Based on the provided initial velocity; The cliff was approximately 143.1 meters tall., The box fell approximately 54 meters away from the base of the cliff.
How to solve the questions on velocity?To find the height of the cliff, we can use the following kinematic equation for vertical motion:
y = y0 + v0_yt + 0.5a_y*t⁻².
where:
y = final vertical position
y0 = initial vertical position (0, since we start from the top of the cliff)
v0_y = initial vertical velocity (0, since the box is shoved horizontally)
a_y = vertical acceleration (9.81 m/s², due to gravity)
t = time (5.4 seconds)
Plugging in the values, we get:
y = 0 + 05.4 + 0.59.815.4²
y = 0.59.8129.16
y = 4.90529.16
y = 143.1 m
To find how far away the box fell from the base of the cliff, we can use the following equation for horizontal motion:
x = x0 + v0_x*t
where:
x = final horizontal position
x0 = initial horizontal position (0, since we start from the edge of the cliff)
v0_x = initial horizontal velocity (10 m/s)
t = time (5.4 seconds)
Plugging in the values, we get:
x = 0 + 10*5.4
x = 54 m
To know more about initial velocity visit:-
brainly.com/question/14295901
#SPJ1
when the distance between two charges is halved, the electrical force between the charges is reduced by 1/4. quadruples. halves. doubles. none of the above choices are correct.
When the distance between two charges is halved, the electrical force between the charges quadruples. This is due to the inverse square relationship between distance and electrical force, which means that when distance is halved, the force increases by a factor of 4.
The electrical force between the charges quadruples when the distance between them is halved. This is due to Coulomb's Law, which states that the electrical force (F) between two charges (q1 and q2) is directly proportional to the product of the charges and inversely proportional to the square of the distance (r) between them. Mathematically, it can be expressed as:
F = k * (q1 * q2) / r^2
When the distance (r) is halved, the denominator (r^2) becomes 1/4 of its original value, which causes the electrical force (F) to be 4 times greater, or quadruple.
To learn more about quadruples please visit:
https://brainly.com/question/7966538
#SPJ11
A car with a mass of 1000 kg is traveling east at 4 m/s. Another car with a mass of 500 kg is traveling west at a speed of 3 m/s. The two cars collide. After the collision, the 1000 kg car has a velocity of 1 m/s east. What is the velocity of the 500 kg car after the collision?
Answer: the velocity of the 500 kg car after the collision is 3 m/s to the east.
Explanation:
Initial momentum = (mass of car 1 x velocity of car 1) + (mass of car 2 x velocity of car 2)
Initial momentum = (1000 kg x 4 m/s) + (500 kg x -3 m/s) (Note that we use a negative velocity for car 2 because it is traveling in the opposite direction)
Initial momentum = 4000 kg m/s - 1500 kg m/s = 2500 kg m/s
After the collision, the total mass and total momentum of the system remain the same.
Final momentum = (mass of car 1 x velocity of car 1) + (mass of car 2 x velocity of car 2)
Final momentum = (1000 kg x 1 m/s) + (500 kg x v) (where v is the velocity of the 500 kg car after the collision)
Final momentum = 1000 kg m/s + 500v
Since the total momentum is conserved, we can set the initial momentum equal to the final momentum:
Initial momentum = Final momentum
2500 kg m/s = 1000 kg m/s + 500v
Solving for v, we get:
v = (2500 kg m/s - 1000 kg m/s) / 500 kg
v = 3 m/s
??
what is the distance the masses on the right of the fulcrum need to be to balance with the two masses on the left?
Distance the masses on the right of the fulcrum need to be to balance with the two masses on the left is (3.5kgm - x kg * d m) / 1kg
In order for a lever to be balanced, the moments on either side of the fulcrum need to be equal. The moment is calculated by multiplying the distance from the fulcrum by the mass of the object. Therefore, to balance the two masses on the left of the fulcrum with the masses on the right, we need to calculate the moment on each side and make them equal.
Let's assume the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg, respectively. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.
we can calculate the moments on each side as follows:
Moment on the left side = 2kg x 1m + 3kg x 0.5m = 2kg + 1.5kg = 3.5kgm
Moment on the right side = x kg * d m + y kg * e m
where d and e are the distances between the fulcrum and the masses on the right.
To make the moments equal, we can set them equal to each other:
3.5kgm = x kg * d m + y kg * e m
If we know the mass of one of the objects on the right, we can solve for the distance needed for the other mass to balance the lever. For example, if we know the mass of the object closest to the fulcrum is 1kg.
we can rearrange the equation to solve for e:
e = (3.5kgm - x kg * d m) / 1kg
Once we know the distance needed for the other mass, we can set up the lever accordingly and it should be balanced.
The Question was Incomplete, Find the full content below :
A balanced lever has two weights on it, the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.what is the distance the masses on the right of the fulcrum need to be to balance with the two masses on the left?
know more about mass of the object here:
https://brainly.com/question/1882842
#SPJ11
In Young's experiment, light from a red laser (wavelength 700 nm) is sent through two
slit. At the same time, monochromatic visible light with another wavelength passes through the same
apparatus. As a result, most of the pattern that appears on the screen is a mixture of two colors; however, the
center of the third bright fringe of the red light appears pure red. What are the possible wavelengths of the
second type of visible light?
In Young's experiment, the pattern that appears on the screen is a result of interference between two sets of waves that are diffracted through two slits.
The location of the bright fringes in the pattern depends on the wavelength of the light used. This means that the path difference between the waves that interfere to produce this fringe is an integer multiple of the red light's wavelength (700 nm).
ΔL = mλ_red = nλ_other
where ΔL is the path difference between the waves, m and n are integers, λ_red is the wavelength of the red light, and λ_other is the wavelength of the second type of visible light.
Solving for λ_other, we get:
λ_other = (m/n) λ_red.
To know more about Young's experiment, here
brainly.com/question/30452257
#SPJ4
how can sonar best be used to monitor the hydrosphere
Sonar can be a useful tool for monitoring the hydrosphere, which includes all of the water on and beneath the Earth's surface.
Sonar works by emitting sound waves that bounce off objects in the water, and then measuring the time it takes for the sound waves to return to the source. By analyzing the echoes, scientists can map the seafloor, measure the depth of the water, and even identify the size and location of marine organisms.
Sonar can also be used to monitor the movements of water masses, including ocean currents, tides, and storm surges. This information is important for understanding global climate patterns and predicting the effects of natural disasters
Learn more about global climate
https://brainly.com/question/27919422
#SPJ4
solid forms of ice last longer because there is more weight with less surface area. (True or False)
The solid forms of ice last longer because there is more weight with less surface area. This statement is false.
Factors like temperature, shape, size, humidity and impurities are some of the factor decides the time for which the ice survives. Even though larger ice particles may have more surface area than solid forms of ice, this does not always imply that they will persist longer.
In reality, due to the insulating effect of the ice itself, larger ice formations, like glaciers, can melt more quickly. In the end, a complex combination of physical, chemical, and environmental elements determines how long ice will last.
To know more about Melting of ice, visit,
https://brainly.com/question/1079154
#SPJ4
5 of 225 of 22 Items
12:41
Question
The basic concept of how a simple motor works is explained by which statement?
Answer:
The basic concept of how a simple motor works is that you put electricity into it at one end and an axle (metal rod) rotates at the other end giving you the power to drive a machine of some kind. The simple motors you see explained in science books are based on a piece of wire bent into a rectangular loop, which is suspended between the poles of a magnet. In order for a motor to run on AC, it requires two winding magnets that don’t touch. They move the motor through a phenomenon known as induction.
I hope this helps! Let me know if I'm wrong!
Explanation:
If we know the size of an asteroid, we can determine its density by A) comparing its reflectivity to the amount of light it reflects. B) looking for brightness variations as it rotates. C) determining its mass from its gravitational pull on a spacecraft, satellite, or planet. D) radar mapping. E) spectroscopic imaging.
Option C) is correct in determining its mass from its gravitational pull on a spacecraft, satellite, or planet. Knowing the mass and size of an asteroid allows us to calculate its density.
Option A) is incorrect because reflectivity only tells us about the asteroid's surface properties, not its density. Option B) is incorrect because brightness variations during rotation do not give us enough information to determine density. Option D) and E) are methods of studying asteroids but are not directly related to determining density.
Knowing the size of an asteroid alone is not enough to determine its density, as different materials can have different densities at the same size. By measuring the gravitational pull of the asteroid on a spacecraft, satellite, or planet, we can determine its mass. Once we have the mass and the size, we can calculate the asteroid's density. Methods such as radar mapping and spectroscopic imaging can provide additional information about the asteroid's composition, but they are not directly used to determine its density.
To learn about gravitational pull please visit:
https://brainly.com/question/13467280
#SPJ11
C) calculating its mass based on the gravitational attraction it exerts on a satellite, planet, or spacecraft.
We can determine an asteroid's mass by observing the gravitational pull it has on a neighbouring body, like a planet, satellite, or spacecraft. We can determine the asteroid's density once we know its mass and size. The gravitational force of an object will be stronger the denser it is. As a result, an asteroid must be denser the more massive it is for a given size.
The density of an asteroid can be determined using this method, which is especially helpful for small or erratic-shaped asteroids that are challenging to see using other techniques like radar mapping or spectroscopic imaging. Additionally, it can offer crucial details on the asteroid's makeup and structure, which can aid researchers in understanding the asteroid's formation and evolution.
learn more about mass here:
https://brainly.com/question/18064917
#SPJ11
starting from rest, a disk rotates about its central axis with constant angular acceleration. in 5.0 s, it rotates 50 rad. what is the instantaneous angular velocity of the disk at the end of the 20.0 s?
The instantaneous angular velocity is 20.0 s is 400 rad/s.
What is the final instantaneous angular velocity of a disk rotating about its central axis with constant angular acceleration?Since the angular acceleration is constant, we can use the formula:
[tex]θ = 1/2 * α * t^2 + ω0 * t[/tex]
where
[tex]θ = angle rotated = 50 rad[/tex]
[tex]α = angular acceleration[/tex]
[tex]t = time = 5.0 s[/tex]
[tex]ω0 = initial angular velocity = 0 (starting from rest)[/tex]
Solving for α, we get:
[tex]α = 2 * (θ - ω0 * t) / t^2 = 2 * 50 rad / 5.0 s^2 = 20 rad/s^2[/tex]
Now, using the formula:
[tex]ω = α * t + ω0[/tex]
where
ω = instantaneous angular velocity at the end of 20.0 s (what we need to find)
[tex]α = angular acceleration = 20 rad/s^2[/tex]
[tex]t = time = 20.0 s[/tex]
[tex]ω0 = initial angular velocity = 0 (starting from rest)[/tex]
we get:
[tex]ω = 20 rad/s^2 * 20.0 s + 0 = 400 rad/s[/tex]
Therefore, the instantaneous angular velocity of the disk at the end of 20.0 s is 400 rad/s.
Learn more about angular acceleration
brainly.com/question/29428475
#SPJ11
imagne that your friends cat was cloned. would it be the same
If my friend's cat was cloned, the resulting cat would be genetically identical to the original cat. However, this does not mean that the cloned cat would be exactly the same as the original cat in terms of its behavior, personality, or even appearance.
Environmental factors and experiences can have a significant impact on an animal's development and behavior, so even genetically identical cats can have differences in their behavior and personality. Additionally, the cloning process itself can introduce some genetic and epigenetic changes that may affect the cloned cat's development and behavior. Therefore, while the cloned cat may look and behave similarly to the original cat, it would not be exactly the same.
Learn more about Environmental factors
https://brainly.com/question/29517743
#SPJ4
the acceleration due to gravity on the moon’s surface is one-sixth that on earth. what net force would be required to accelerate a 20-kg object at 6.0 m/s2 on the moon?
To determine the net force required to accelerate a 20-kg object at 6.0 m/s² on the moon, we need to consider the acceleration due to gravity on the moon and the object's mass.
The acceleration due to gravity on the moon is one-sixth that on Earth. Since the acceleration due to gravity on Earth is approximately 9.81 m/s², the acceleration due to gravity on the moon is (1/6) * 9.81 m/s² ≈ 1.63 m/s².
Now, we can use Newton's second law of motion, F = m * a, to find the net force required for the given acceleration on the moon. Here, m = 20 kg (mass of the object) and a = 6.0 m/s² (desired acceleration).
Net force (F) = 20 kg * 6.0 m/s² = 120 N.
So, the net force required to accelerate a 20-kg object at 6.0 m/s² on the moon is 120 N.
To know more about Newton's second law of motion:
https://brainly.com/question/27712854
#SPJ11
this question has multiple answers. choose all that are correct. the hotter an object group of answer choices the brighter the object. the faster the object. the redder the object. the dimmer the object. the bluer the object. the slower the object.
The hotter an object is, the brighter and redder it appears, while cooler objects appear dimmer and bluer.
The question is asking about the relationship between an object's temperature and its brightness, color, and speed. The correct answers are that the hotter an object is, the brighter it appears and the redder it appears.
This is because hot objects emit more light, including more of the red end of the spectrum. The opposite is also true, meaning that cooler objects appear dimmer and bluer.
The speed of an object is not directly related to its temperature, so that answer is incorrect. However, it is important to note that the temperature of an object can affect its movement and velocity in certain situations.
To learn more about : objects
https://brainly.com/question/28308143
#SPJ11
how does the charge depend on time for a discharging capacitor in terms of capacitance c , resistance r , and initial charge q0 ?
The charge on a discharging capacitor decreases exponentially with time, and the rate of the decrease is determined by the resistance and capacitance values in the circuit.
The charge on a discharging capacitor decreases exponentially with time according to the following equation:
[tex]Q(t) = Q0 * e^{-t / (R * C})[/tex]
where Q(t) is the charge on the capacitor at time t, Q0 is the initial charge on the capacitor, R is the resistance in the circuit, C is the capacitance of the capacitor, and e is the mathematical constant known as Euler's number.
The time constant for the discharging process is given by the product of resistance and capacitance,
τ = R * C.
The time constant represents the time it takes for the charge on the capacitor to decrease to approximately 36.8% of its initial value
(i.e.,[tex]Q(τ) = Q0 * e^{-1} ≈ 0.368 * Q0[/tex]).
Therefore, the charge on a discharging capacitor decreases exponentially with time, and the rate of the decrease is determined by the resistance and capacitance values in the circuit.
For more such questions on metabolism , Visit:
https://brainly.com/question/25923373
#SPJ11