Your father bought you a pair of shoes. When you wore the shoes you realized there was a problem. The shoes were too long. Why might such prblm arise and how can it be mitigated?
Please answer it soon as possible ​

Answers

Answer 1

Answer: This problem may arise when your father never bought a shoe before. A male is bad at buying accesories and guessing the size, so the mother should have bought a pair of shoes. Or it can also be that your father has a short term memory or that he never knew the size of your feets. The feet might also have irregular growth for which it grows more than the normal size but such cases are rare to be seen.

You can prevent this by going with your father and selecting the shoe of your size. Or you can simply send your mother to buy it for you instead. Or another perfect choice could be is that you just dont ever send your father to buy anything for you or just never buy a pair of shoes. Wear the shoes that you always did or buy it yourself since your the one who is supposed to know the size of your feets. Another possible solution could be that you can make use of the money by gifitng them to someone close to you.


Related Questions

does a perfectly elastic colission conserve momentum and impulse

Answers

Answer:

A perfectly elastic collision conserves momentum and kinetic energy..

what are the main component of network​

Answers

Answer:

A network has 5 basic components viz. clients, servers, channels, interface devices and operating systems.

A network has 5 basic components viz. clients, servers, channels, interface devices and operating systems

For more tutorials msg us on 8928482271

Learning Task 1: Define or describe the following words relat are not familiar with the word, you may ask assistance from y your answer in your notebook. 1. table 2. tennis C 3. ping-pong 4. net 5. ball 6. racket​

Answers

Answer:

1.) TABLE = The table is 2.74 m (9.0 ft) long, 1.525 m (5.0 ft) wide, and 76 cm (2.5 ft) high with any continuous material so long as the table yields a uniform bounce of about 23 cm (9.1 in) when a standard ball is dropped onto it from a height of 30 cm (11.8 in), or about 77%.

2.) TENNIS = Tennis is a racket sport that can be played individually against a single opponent (singles) or between two teams of two players each (doubles). Each player uses a tennis racket that is strung with cord to strike a hollow rubber ball covered with felt over or around a net and into the opponent's court.

3.) PING-PONG = Table tennis, also known as ping-pong and whiff-whaff, is a sport in which two or four players hit a lightweight ball, also known as the ping-pong ball, back and forth across a table using small rackets. ... Spinning the ball alters its trajectory and limits an opponent's options, giving the hitter a great advantage.

4.) NET = This is stretched across the centter of the table by a cord attached to a post at either end. It measures 6ft long and the ball must pass over it for a rally to continue.

5.) BALL = The ball, which is spherical and hollow, was once made of white celluloid. Since 1969 a plastic similar to celluloid has been used. The ball, which may be coloured white, yellow, or orange, weighs about 0.09 ounce (2.7 grams) and has a diameter of about 1.6 inches (4 cm).

6.) RACKET = A table tennis racket is made up of two distinct parts - a wooden blade which incorporates the handle together with table tennis rubbers affixed to each side of the blade using water-based glue.

Explanation:

All my answers are

about the tools of the

game of tennis

Help plz I don’t know it

Answers

Answer:

2. thermal insulator. 3. convection current. 4. conduction. 5. thermal conductor. 6. radiation.

Explanation:hope this helps you.

7. a heater heating up the inside of the car
Convection conduction and radiation

Answers

Convection is the answer

please help me !! i’ll give you brainliest if you get the answer right!

Answers

Answer: 25N to the right

Explanation: 35N - 10N = 25N

how to calculate kinetic energy given mass and velocity

Answers

In classical mechanics, kinetic energy (KE) is equal to half of an object's mass (1/2*m) multiplied by the velocity squared. For example, if a an object with a mass of 10 kg (m = 10 kg) is moving at a velocity of 5 meters per second (v = 5 m/s), the kinetic energy is equal to 125 Joules, or (1/2 * 10 kg) * 5 m/s2.

What is the half-life of an isotope if after 30 days you have 31.25 g remaining from a 250 g beginning sample size?

Answers

The half-life of the given isotope will be 10 days, if after 30 days only 31.25 grams are remaining from a sample of 250 grams of the sample size taken in the beginning.

What is Half-life of an element?

The Half-life is the time which is required for a quantity to reduce the content to half of the amount present as its initial value. The term is used in nuclear physics to describe how quickly an unstable atom undergo radioactive decay or how long does stable atoms survive. The term is also used generally to characterize any type of exponential decay.

The half-life of the isotope can be calculated by the formula:

FR = 0.5n

FR = Fraction Remaining = 31.25 g / 250.0 g = 0.1250

n = number of half lives elapsed = ?

0.125 = 0.5n

log 0.125 = n log 0.5

-0.9031 = -0.3010 n

n = 3.000 half lives have elapsed

3 half lives = 30 days

1 half live = 10 days

Therefore, the half-life of the isotope will be 10 days.

Learn more about Half-life here:

https://brainly.com/question/24710827

#SPJ2

Which metals can be extracted from following ores (i) Argentite (ii) Haematite (iii) Chalcopyrite (iv) Bauxite​

Answers

Answer

1) iron

2) Aluminium

3) sliver

4) copper

I hope it's helpful for you ☺️

Answer

1) iron

2) aluminium

3) silver

4) copper

When Magnesium and Fluorine react what type of bond is formed
A) Metallic
B) Ionic
C) Covalent
D) Diatomic

Answers

Answer:

hi your answer should be B

Explanation:

Hope this helps!

Answer:

ionic

Explanation:

two metals that bond are considered ionic bonds

Question 17 (Essay Worth 5 points)
(02.06 HC)
Choose two spheres of Earth which interact when hot springs are formed. Use complete sentences to explain how they interact during this process
X2
= 12 Source
ус
cM
В І
U S XX T
.
Styles
Format
Font
Size
A- A -
Increase Indent

Answers

Answer:

geosphere and hydrosphere

Explanation:

Which are examples of perfectly inelastic collisions? Check all that apply.

a baseball bouncing off a bat
bumper cars bumping off of each other
a cue ball hitting an eight ball and stopping
a plane landing on an aircraft carrier
rain sticking to a window
two train cars coupling together

Answers

A plane landing on an aircraft carrier
Rain sticking to a window
Two train cars coupling together

Answer:

D. a plane landing on an aircraft carrier

E. rain sticking to a window

F. two train cars coupling together

Explanation:

A horizontal force F~ is applied to a block of mass m = 1 kg placed on an inclined
at θ = 30◦ plane. The coefficients of static and dynamic friction are µs = 0.3 and µ = 0.2, respectively. Find F such that the block is moving up the slope with a constant speed.

Answers

Hi there!

To find the appropriate force needed to keep the block moving at a constant speed, we must use the dynamic friction force since the block would be in motion.

Recall:

[tex]\large\boxed{F_D = \mu N}}[/tex]

The normal force of an object on an inclined plane is equivalent to the vertical component of its weight vector. However, the horizontal force applied contains a vertical component that contributes to this normal force.

[tex]\large\boxed{N = Mgcos\theta + Fsin\theta}}[/tex]

We can plug in the known values to solve for one part of the normal force:

N = (1)(9.8)(cos30)  + F(.5) = 8.49  + .5F

Now, we can plug this into the equation for the dynamic friction force:

Fd= (0.2)(8.49 + .5F) = 1.697 N + .1F

For a block to move with constant speed, the summation of forces must be equivalent to 0 N.

If a HORIZONTAL force is applied to the block, its horizontal component must be EQUIVALENT to the friction force. (∑F = 0 N). Thus:

Fcosθ = 1.697 + .1F

Solve for F:

Fcos(30) - .1F = 1.697

F(cos(30) - .1) = 1.697

F = 2.216 N

A 7.5 kg beaver dives horizontally off a 50 kg log at a speed of 4 m/s. What is the speed of the log?

Answers

Answer:

[tex]0.6\; \rm m\cdot s^{-1}[/tex], assuming that drag of the water on the log is negligible.

Explanation:

The momentum [tex]p[/tex] of an object is equal to the product of mass [tex]m[/tex] and velocity [tex]v[/tex]. That is, [tex]p = m\, v[/tex].

If the drag of water on the log is negligible, momentum of the beaver and the log, combined, would be preserved.

The momentum of the beaver and the log, combined, was initially [tex]0\; \rm kg\cdot m \cdot s^{-1}[/tex].

The momentum of the beaver right after the dive would be [tex]7.5 \; {\rm kg} \times 4\; {\rm m \cdot s^{-1}} = 30\; {\rm kg \cdot m \cdot s^{-1}}[/tex].

The sum of the momentum of the beaver and the log is conserved and should continue to be [tex]0\; {\rm kg\cdot m \cdot s^{-1}}[/tex] even after the dive. Since the momentum of the beaver is [tex]30\; {\rm kg \cdot m \cdot s^{-1}[/tex] after the dive, the momentum of the log should become [tex](-30)\; {\rm kg \cdot m \cdot s^{-1}}[/tex].

Since the mass of the log is [tex]50\; {\rm kg}[/tex], the new velocity of this log would be:

[tex]\begin{aligned}v &= \frac{p}{m} \\ &= \frac{(-30)\; {\rm kg \cdot m \cdot s^{-1}}}{50\; {\rm kg}} \\ &= (-0.6)\; {\rm m \cdot s^{-1}}\end{aligned}[/tex].

(The new velocity of the log is negative because the log would be moving away from the beaver.)

The speed of an object is the magnitude of velocity. For this log, a velocity of [tex](-0.6)\; {\rm m \cdot s^{-1}}[/tex] would correspond to a speed of [tex]|(-0.6)\; {\rm m \cdot s^{-1}| = 0.6\; {\rm m \cdot s^{-1}[/tex].

what is the necessary condition for the conservation of angular momentum

Answers

Answer:

The conservation of momentum of a system is a fundamental principle in classical mechanics. The only condition for this principle being valid is that the system should be an isolated one, i.e. It should not be acted upon by any external force.

Part Two: Criteria, Constraints, and Prioritizations
1. Choose one sub-problem that you will investigate further and explain which one you chose here.
o
2. List two realistic criteria for the sub-problem.
o
o
3. Explain why it is important for these criteria to be met in order to solve the problem.
o
4. List two constraints for the sub-problem.
o
o
5. Explain why these constraints exist. (How do they limit solutions to the problem?)
o
6. Prioritization of the criteria and constraints and an explanation supporting the decisions made based on research.
PLEASE HELP ME I DONT UNDERSTAND<333

Answers

Answer:

Usually, a solution can have several criteria and constraints. Even though all are important, some criteria are more important than others. The same holds true for constraints. But what do you do if it's impossible for a solution to cover every criterion while avoiding every constraint? In cases like this, you can use prioritization. Listing criteria and constraints based on priority shows the relative importance of each. You will need to prioritize the criteria and constraints for each sub-problem so that you can design a solution for each one individually. Prioritization can help you compare two different possible solutions. For example, the criterion that cars travel at 15 mph through the neighborhood might be a higher priority than the constraint that homeowners are only willing to spend $10,000 on this issue. If this is the case, you would want to generate solutions that also follow the priority in mind. All criteria are important, but engineers must sometimes make a trade-off, which is a compromise or change in one or more criteria or constraints so that they can be met at the same time. This is where prioritization comes in handy as it helps determine the trade-offs. A solution that is doing a better job of meeting one criterion may result in not completely meeting another criterion. Prioritization will help you choose which solution to go with.

Explanation:

I got this from quizlet :)

A hair dryer transforms 10,000J of energy in 4s. What is its power?

Answers

Answer:

2500 W

Explanation:

Power is the rate at which work is done and can be found by using the formula

[tex]p = \frac{w}{t} \\ [/tex]

p is power in Watts ( W)

w is the workdone in J

t is time in s

From the question

w = 10,000 J

t = 4 s

We have

[tex]p = \frac{10000}{4} = 2500 \\ [/tex]

We have the final answer as

2500 W

Hope this helps you

Object 1 has a mass of 7.0kg and a initial velocity of 17.0 m/s. Object 2 has a mass of 8.0kg and a initial velocity of -14.0 m/s. What are the final velocitys of each object. Please show work

Answers

[tex]\\ \sf\longmapsto m1v1+m2v2=(m1+m2)v3[/tex]

[tex]\\ \sf\longmapsto 7(17)+8(-14)=(7+8)v3[/tex]

[tex]\\ \sf\longmapsto 119-112=15v3[/tex]

[tex]\\ \sf\longmapsto 15v3=7[/tex]

[tex]\\ \sf\longmapsto v3=7/15[/tex]

[tex]\\ \sf\longmapsto v3=2.1m/s[/tex]

You are pulling a child in a wagon. The rope handle is inclined upward at a 60∘ angle. The tension in the handle is 20 N.
Part A
How much work does the rope do on the wagon if you pull the wagon 200 m at a constant speed?

Answers

Angle (θ) = 60°Force (F) = 20 NDistance (s) = 200 mTherefore, work done= Fs Cos θ= (20 × 200 × Cos 60°) J= (20 × 200 × 1/2) J= (20 × 100) J= 2000 J

Answer:

2000 J

Hope you could get an idea from here.

Doubt clarification - use comment section.

S O L U T I O N:

Here we've been provided with the information i.e

Force (F) = 20N

Distance (s) = 200m

Angle (θ) = 60°

Ans we have given to find out what is work done (W) = ?

The standard formula to calculate work done is given by,

[tex]:\implies\sf{w = f \times s \times cos \theta}[/tex]

[tex]:\implies\sf{w = 20 \times 200 \times cos60}[/tex]

[tex]:\implies\sf{w = 20 \times 200 \times \frac{1}{2} }[/tex]

[tex]:\implies\sf{w = 20 \times 100 \times 1}[/tex]

[tex]:\implies\sf{w = 2000J}[/tex]

Total work done done by rope is 2000J.

Define "one solar day".​

Answers

Answer:

the interval between transits of the apparent or mean sun across the meridian at any place.

when an individual charge flies through a *blank* field, a force is exerted on the charge and the path of the charge bends.

Answers

Answer:

"electric or magnetic"

F = q E    force on charge q due to electric field E

F = q v x B       force on charge q due to magnetic field B

what is value of 2.37 in sl units

Answers

The question is not clear

A heavy crate is pushed across a floor at a constant velocity. Friction is present between the crate and floor. During this motion, the force of friction is _?_ the force pushing the crate forward.
Question 3 options:

less than


greater than


equal to

Answers

Answer:

less than.

Explanation: because Friction is the resistance to motion of one object moving relative to another. which means it cant be greater because how would it be greater if its pushing forward when friction is the resistance.

THANKS FOR THE POINTS :D


A tennis ball is dropped from a height of 3 m and bounces back to a height of
1 m after hitting the ground (s = 0).

Use the equation V^2=U^2 + 2as to calculate the velocity of the tennis
ball when it hits the ground.

Answers

The velocity of the tennis ball when it hits the ground is calculated as 4.43m/s. Details about velocity can be found below.

How to calculate velocity?

The velocity of a moving object can be calculated using the equation of motion as follows:

v² = u² + 2as

Where;

v = final velocityu = initial velocitya = accelerations = distance

v² = 0² + 2(9.8) (1)

v² = 19.6

v = ✓19.6

v = 4.43m/s

Therefore, the velocity of the tennis ball when it hits the ground is calculated as 4.43m/s.

Learn more about velocity at: https://brainly.com/question/18084516

#SPJ1

which is the correct relationship among pressure, flow, and resistance?

Answers

Answer:

Flow is proportional to change in pressure and inversely proportional to resistance.

a car dealer sells 4 makes of cars in 5 colors with either standard or automatic transmissions. how many variations does the dealership offer?

Answers

The number of variations the dealership have is 40 cars.

Data given;

The number of different product = 4The number of transmission = 2 (standard or automatic)The numbers of colors available = 5

Dealership variation

This is the total numbers of cars available in the dealer shop at the moment.

To get that, we simply multiply the numbers of colors available, the number of transmission and the makes of car available.

This is equal to

[tex]4*2*5=40[/tex]

From the above calculation, we can say that the variations the dealership offers is 40

Learn more on combination here

https://brainly.com/question/10339517

what is the prmary source of energy inside of the earth

Answers

The correct answer is the energy of the sun
The primary source would be the sun

why is water soaked cloth used on forehead during fever?please can you tell me answer​

Answers

Answer:

This is because the cloth soaked in water can absorb and evaporate the heat from your forehead.

Explanation:

This technique is used to cool down your fever, and to help you feel better.

Select the correct answer

1. Instruments that produce sound are called sources of light.

2. Music has no ability to heal the mental stress.

3. A medium is necessary for sound travel.

4. We hear sounds of frequencies below 20 Hz. O First answer O Second answer O Third answer O Forth answer​

Answers

Answer:

C or 3

Explanation:

A: no they are called sources of sound. A is incorrect.

B: It does. Many people attest to this. But this is not a property of physics.

C: A media is required is the correct answer.

D: Dogs might. In general we don't.

I would pick C

how does gravitational lensing tell us about the mass of a galaxy cluster?

Answers

Answer:

Newton's universal law of gravitation predicts how mass can distort light, so we can apply Newton's law to determine the mass of the cluster. ... The lensing allows us to determine the orbital speeds of galaxies in the cluster, so that we can determine the mass of the cluster from the orbital velocity law.

Explanation:

Other Questions
The athlete drink 16 ounces of water every two hours starting at 7:30 AM and continuing for the next 14 hours. A) how many quarts did the athlete consume? B) how many pints of water did the athlete consume? Hurry up some one answer Which statement about the graph of a linear function is true?AThe graph intersects the x-axis in two unique places.BThe graph intersects the y-axis in two unique places.CThe graph is a curved line.DThe graph is a straight line. Assume that students in a course are required to produce a written report on an ICT-related the topic each semester. If you wanted to create a model to estimate how long it should take a student to complete such an assignment, what measure of work content would you use? Some reports might be more difficult to produce than others: what factors might affect the degree of difficulty? Provide a list of factors and explain each briefly. who is the persident of the united states of america PLEASE HELP 40 POINTS PLSSSSSSSS The graph shows the relationship between pounds of dog food and total cost in dollars for the dog food.which statements about the graph is are true?A Point shows the cost is $0 for 0 pound of dog foodB Point 10.5 shows the cost is $1 for 0.5 pound of dog foodC. Point 2. 1 shows that 2 pounds of dog food cost $1.D. Point 2) shows the cost is $4 tor 2 pounds of dog foodE Point 10. shows that 10 pounds of dog food costs $5 Drawing and dialogue please help due tomorrow what causes did abolitionists support besides ending slavery? WILL GIVE BRAINIEST IF CORRECT Which statements describe iambic pentameter as it is used in shakespearean sonnets? select two options. (Statistics)Which of the following is NOT a characteristic of a least squares regression line? What proportion of US women have a height greater than 69.5 inches? After world war 1, the U.S. entered a phase of life sucks yes or no I need help please!!!! What is the most messed up thing in society in your opinion? The excerpt from In the Time of Butterflies is written mainly in ____________ tense, from a(n) ____________ point of view.Question 14 options:a) past; first-personb) present; first-personc) past; third-persond) present; third-person Help help help help history what is the answer of the proportion 8/3 = y/13 round your answer to the nearest tenth In which of these states is the age of consent 18 years old?WA16MT16ME16OR18MA16ID18WY18NV16RI 16CT 16NJ 16DE 18MD 16UT18CA1816 WNHNDVT 1618MN16SD16WINY1618MI1716NEIAPA1716OH 16IL IN17 16KSMO1616 17 KY 1618NCOKTN 1816ARSC16AL16MSGA16LA16TX161717FL181716AZ18NM17HI16AK16Age 16Age 17Age 18A. North CarolinaB. Florida Please help for this question