"Set 2 (N, O, & F) would be more similar in terms of properties.
This is because elements in the same group (column) of the periodic table generally have similar properties due to their similar electron configurations. Fluorine (F) is in Group 17 (the halogens) of the periodic table, and chlorine (Cl) and bromine (Br) are also halogens, which means they have similar properties such as being highly reactive and forming acidic compounds.
Nitrogen (N), oxygen (O), and fluorine (F) are all located in Group 16 (the chalcogens) and Group 17 (the halogens) of the periodic table, respectively. While nitrogen is not a halogen, it is located just above Group 17, and oxygen and fluorine are halogens. Elements in Group 16 and 17 share similar chemical properties such as high electronegativity and the tendency to form covalent bonds.
Therefore, because elements in the same group of the periodic table have similar properties, we would expect Set 2 to be more similar in terms of properties than Set 1. Specifically, nitrogen, oxygen, and fluorine are all nonmetals with relatively high electronegativities and the ability to form strong covalent bonds, which makes them more similar to each other than to the halogens in Set 1" (ChatGPT, 2023)
Select the correct statements about the chemical equation shown.
6CO2(g)+6H2O(l)⟶C6H12O6(s)+6O2(g)
A. Both products are solids in this chemical reaction.
B. Only liquids and gases are involved in this chemical reaction.
C. In this chemical equation, (g) means gram.
D. Solids, liquids, and gases are involved in this chemical reaction.
E. A gas reacts with a liquid in this chemical reaction.
Answer:
D
Explanation:
“HELP”
Consider the homogeneous equilbrium reaction of gaseous compound "A" to produce gaseous compound "B" :
2A (g) <--> 3B (g)
(<--> is the double headed equilibrium arrow)
A flask is filled with 1.608 M of A and 1.135 of B. This flask is then allowed to reach equilbrium. At that point the flask contains an equilbrium amount of B equal to 0.533 M. What is the equilibrium molarity of compound "A" ?
When the reactants and products of a chemical reaction are in equilibrium, the reaction is referred to as an equilibrium reaction.
When the rate of products becoming reactants is equal to the rate of reactants becoming products, equilibrium has been reached. Chemical equilibrium has four requirements:
Close the computer system.Dynamic reactions are required.Reactions in both directions are equal.Lastly, the ratio of reactants to products must remain constant.Practically speaking, these conditions indicate that the reaction cannot absorb or lose substances (gases, liquids, etc.) from the environment. There must be a response that has both a forward and a backward reaction that can counterbalance one another. Both reactants and products must be present in the reaction.
Learn more about equilibrium,
https://brainly.com/question/30807709
#SPJ1
What is the pressure of 1.71 g
of nitrogen gas confined to a volume of 0.300 L
at 35 ∘C
?
Answer:
12.93 atm
Explanation:
c xc xc xc
HELP PLS
the screenshot is attached. it has it all there
The balanced reaction equation is;
C2H5OH + 3O2 → 2CO2 + 3H2O
How do you balance reaction equations by atom count?Balancing a chemical equation by atom count involves adjusting the coefficients (the numbers in front of each chemical formula) so that the number of atoms of each element is equal on both sides of the equation. Here are the steps to follow:
Write the unbalanced chemical equation, including the correct chemical formulas for each reactant and product.
Count the number of atoms of each element on both sides of the equation.
Determine which elements are not balanced by comparing the number of atoms on each side.
Choose one element that is not balanced, and start by balancing it on one side of the equation.
Add coefficients to the other reactants and products in the equation until the number of atoms of that element is balanced on both sides.
Repeat this process for each element that is not balanced until the equation is balanced.
Learn more about atom count:https://brainly.com/question/30675351
#SPJ1
Water (2230 g ) is heated until it just begins to boil. If the water absorbs 4.81×105 J of heat in the process, what was the initial temperature of the water?
Initial temperature of the water was 62.5°C.
What is the specific heat capacity of water and why is it important?The specific heat capacity of water is the amount of heat required to raise the temperature of one gram of water by one degree Celsius. It is an important property of water because it makes it a good heat storage medium, which is why it is used in many cooling and heating systems.
We can use the formula Q = mcΔT, where Q is the heat absorbed, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
Since the water is heated until it just begins to boil, we know that ΔT = 100°C (the boiling point of water at atmospheric pressure).
The specific heat capacity of water is c = 4.184 J/(g·°C).
Plugging in the values we know, we get:
4.81×10^5 J = (2230 g) × (4.184 J/(g·°C)) × (100°C - initial temperature)
Simplifying and solving for the initial temperature, we get:
initial temperature = 100°C - (4.81×10^5 J) / (2230 g × 4.184 J/(g·°C))
= 62.5°C
Learn more about "specific heat" here:
https://brainly.com/question/11297584
#SPJ1
the enthalpy of formation of caesium chloride is Cs(s)------->Cs(g) ΔH⁰= –44.28 kj mol-¹
the enthalpy of sublimation of caesium is Cs(s) ------>Cs(g) ΔH⁰=+77.6 kj mol-¹
The lattice energy of the ceasium chloride is -1233 kJ/mol. This is the energy that is released when the salt is formed.
How do you find the lattice energy?The question is incomplete but I believe that you want to know how to obtain the lattice energy by the Haber cycle and I will throw some light on that.
Lattice energy is the amount of energy released when gaseous ions combine to form a solid ionic compound. It is a measure of the strength of the electrostatic attraction between the ions in the crystal lattice of the compound.
The lattice energy can be calculated using the Born-Haber cycle, which is a series of thermochemical equations that relate the lattice energy to other thermodynamic properties of the compound.
Hence;
-885 - (77 + 243 + 376 (-348))
= -1233 kJ/mol
Learn more about lattice energy:https://brainly.com/question/18222315
#SPJ1
Why does lowered air pressure allow water to boil at room temperature? A. The mass of the liquid is reduced, making it easier to form a gas. B. The lowered air pressure increases the temperature of the liquid. C. Less force pushes down on the liquid, making it easier for gas to escape. D. The kinetic energy of the liquid molecules increases, causing gas to form.4
The right response is C. Less pressure is applied to the liquid, which makes it simpler for gas to escape.
Why is it possible for water to boil at room temperature despite the reduced air pressure?Less pressure allows the water molecules to flow more freely, gaining kinetic energy in the process. As a result, less heat energy is needed to break the intermolecular interactions. (the boiling point decreases). Water boils and transforms into water vapour after the boiling point is reduced to room temperature.
Why does water boil at lower temperatures and lower pressures?When air pressure is lower, it requires less energy to get water to the boiling point. Water will boil at a lower temperature at higher altitudes because there is less energy and hence less heat there.
To know more about Less pressure visit:-
https://brainly.com/question/24613205
#SPJ1
List five types of chemical reactions
Write short notes and give a representative balanced chemical equation in each of the type of chemical reaction mentioned in the above statemeny
Name two types of salts.
List four methods of preparing salts and give a representative balanced chemical equation in each case.
Answer:
Combination reactions: In this type of reaction, two or more substances combine to form a single product. The general form of the equation is A + B → AB. An example of a combination reaction is:
2Na + Cl2 → 2NaCl
Decomposition reactions: In this type of reaction, a single reactant breaks down into two or more products. The general form of the equation is AB → A + B. An example of a decomposition reaction is:
2H2O → 2H2 + O2
Single replacement reactions: In this type of reaction, one element replaces another element in a compound. The general form of the equation is A + BC → AC + B. An example of a single replacement reaction is:
Zn + CuSO4 → ZnSO4 + Cu
Double replacement reactions: In this type of reaction, two compounds exchange ions to form two new compounds. The general form of the equation is AB + CD → AD + CB. An example of a double replacement reaction is:
NaCl + AgNO3 → NaNO3 + AgCl
Combustion reactions: In this type of reaction, a substance reacts with oxygen to produce heat and light. The general form of the equation is A + O2 → CO2 + H2O. An example of a combustion reaction is:
C3H8 + 5O2 → 3CO2 + 4H2O
Two types of salts are:
Acid salts: These are salts that contain hydrogen ions. An example of an acid salt is sodium hydrogen sulfate (NaHSO4).
Basic salts: These are salts that contain hydroxide ions. An example of a basic salt is copper(II) hydroxide carbonate (Cu2(OH)2CO3).
Four methods of preparing salts and their balanced chemical equations are:
Acid-base reaction: This involves the reaction of an acid and a base to produce a salt and water. The general form of the equation is acid + base → salt + water. An example of an acid-base reaction is:
HCl + NaOH → NaCl + H2O
Precipitation reaction: This involves the reaction of two solutions to produce an insoluble salt, which can be collected by filtration. The general form of the equation is A + B → AB(s). An example of a precipitation reaction is:
AgNO3 + NaCl → AgCl(s) + NaNO3
Direct combination: This involves the reaction of two elements to produce a salt. The general form of the equation is A + B → AB. An example of direct combination is:
Sodium + chlorine → sodium chloride
Neutralization reaction: This involves the reaction of an acid and a base to produce a salt and water. The general form of the equation is acid + base → salt + water. An example of a neutralization reaction is:
H2SO4 + 2NaOH → Na2SO4 + 2H2O
Explanation:
Complete and balance each combustion reaction.
1.Si(s)+O2(g)→
2.C9H20(l)+O2(g)→
3.C4H10O(l)+O2 (g)→
4.SiC(s)+O2(g)→
The balanced combustion reactions are: 1. 2 Si(s) + O₂(g) → 2 SiO₂(s) 2. C₉H₂0(l) + 14 O₂(g) → 9 CO₂(g) + 10 H₂O(g)
3. C₄H₁₀O(l) + 6 O₂(g) → 4 CO₂(g) + 5 H₂O(g)
4. SiC(s) + 2 O₂(g) → SiO₂(s) + CO₂(g)
What is Combustion Reaction?A combustion reaction is a chemical reaction that occurs between a fuel (such as a hydrocarbon) and an oxidizing agent (usually oxygen) to produce heat and usually light in the form of a flame. During the reaction, the fuel is oxidized, and carbon dioxide and water vapor are produced as waste products.
Combustion reactions are exothermic, which means they release energy in the form of heat. They are often used to produce energy in engines and power plants, as well as in various industrial processes. Combustion reactions are also important in the environment, as they play a role in the carbon cycle and can contribute to air pollution when incomplete combustion occurs.
Learn more about Combustion Reaction :
brainly.com/question/13251946
#SPJ1
Which of the following is NOT an impact of using gasoline mixed with ethanol instead of pure petroleum-based gasoline?
Multiple choice question.
cross out
A)
decreases cost of fuel
cross out
B)
reduces dependency on petroleum
cross out
C)
increases smog
cross out
D)
decreases acid rain
The impact that is NOT associated with using gasoline mixed with ethanol instead of pure petroleum-based gasoline is D) decreases acid rain.
Explain about gasoline ?
Gasoline is a flammable liquid fuel that is widely used to power internal combustion engines in automobiles, boats, small engines, and other machinery. It is a complex mixture of hydrocarbons, which are molecules composed of carbon and hydrogen atoms.
Gasoline is derived from crude oil through a refining process that separates it from other petroleum products. The refining process can also vary the composition of gasoline, creating different grades and blends that are suited to different purposes.
Gasoline is highly combustible and must be handled with care.
The impact that is NOT associated with using gasoline mixed with ethanol instead of pure petroleum-based gasoline is D) decreases acid rain.
To learn more about petroleum follow the given link: https://brainly.com/question/28285215
#SPJ1
Is it the same ΔrG° and ΔfG° ? Standard free gibbs energy.
Answer:
Yes. ΔrG° and ΔfG° represent the same thing, namely the standard free Gibbs energy. In the context of thermodynamics, this energy refers to the energy associated with a reaction that is taking place at a given temperature, pressure and concentration of reactants. This energy is dependent on the thermodynamic properties of the substances that are undergoing the reaction, and can be calculated from the reaction enthalpy, entropy and the standard state properties of the participating chemicals.
To further clarify the concept, let's take a look at a simple reaction:
A + B → C + D.
The standard free Gibbs energy for this reaction can be calculated using the following equation:
ΔrG° = ΔH° - TΔS°
Where ΔH° is the standard enthalpy change for the reaction, T is the temperature in Kelvin, and ΔS° is the standard entropy change for the reaction. It is important to note that both ΔH° and ΔS° are given in units of kJ/mol. The resulting ΔrG° can also be expressed in terms of the standard state properties of each participating reactant, resulting in the equation:
ΔrG° = Σi (ni·G°i) = Σi (ni·(H°i - T·S°i))
Where ni is the stoichiometric coefficient of the reactant,
Write the net ionic equation, including phases, that corresponds to the reaction
Cu(ClO4)2(aq)+Na2CO3(aq)⟶CuCO3(s)+2NaClO4(aq)
Cu
(
ClO
4
)
2
(
aq
)
+
Na
2
CO
3
(
aq
)
⟶
CuCO
3
(
s
)
+
2
NaClO
4
(
aq
)
Answer:
Cu^2+(aq) + CO3^2-(aq) ⟶ CuCO3(s)
Explanation:
The balanced chemical equation for the given reaction is:
Cu(ClO4)2(aq) + Na2CO3(aq) ⟶ CuCO3(s) + 2NaClO4(aq)
We first need to identify the spectator ions to write the net ionic equation. These are ions that appear on both sides of the equation and do not participate in the reaction. In this case, the spectator ions are Cu^2+ and ClO4^-, as they appear unchanged on both sides.
The net ionic equation is obtained by removing the spectator ions from the balanced equation. Therefore, the net ionic equation for this reaction is:
Cu^2+(aq) + CO3^2-(aq) ⟶ CuCO3(s)
Note that Na+ and ClO4^- are not included in the net ionic equation because they do not participate in the formation of the solid product (CuCO3).
What is required to make a large amount of energy?
A weather balloon is inflated to a volume of 29.8 L at a pressure of 734 mmHg and a temperature of 27.9 ∘C . The balloon rises in the atmosphere to an altitude where the pressure is 375 mmHg and the temperature is -16.8 ∘C . Assuming the balloon can freely expand, calculate the volume of the balloon at this altitude.
Answer: 49.67 Liters
Explanation: To solve this problem, we only have to use 1 equation: P1V1/T1=P2V2/T2. P, T, and V represent pressure, temperature, and volume respectively. This equation can be used when dealing with gas problems. Usually, there is some change in pressure, temperature, or volume, that will alter pressure or volume. Temperature does not change with pressure or volume.
We are given the balloon starting at 29.8 L(V1), a pressure of 734 mmHg(P1), and a temperature of 27.9 C(T1). The ballon rises and encounters a new set of conditions: 375 mmHg(P2) and -16.8 C(T2). The only variable we are missing is V2 which we will solve for. But before we plug in, we have to do some unit conversions. When using any ideal gas equation, the temperature has to be in Kelvin, the volume in Liters, and the pressure in atm. To convert from mmHg to atm, we simply divide by 760. To convert from Celcius to Kelvin we add 273. Now we can plug into the equation.
((.9657 atm)(29.8 L))/300.8 K=((.4934 atm)(V2))/256.2 K
((.9657 atm)(29.8 L)(256.2 K))/((300.8 K)(.4934 atm))=V2
V2= 49.67 Liters
Hope this Helps!
EDTA^-4 is used as a complexing agent. Solutions of EDTA^-4 are used to treat heavy metal poisoning by removing the heavy metal in the form of a soluble complex ion. The complex ion virtually eliminates the heavy metal ions from reacting with biochemical systems. The reaction of EDTA^-4 with Hg^2+ is: Hg^2+(aq) + EDTA^-4 (aq) = HgEDTA^-2 (aq), Kf= 6.3*10^21
Consider a solution that is 0.025 M Hg(NO3)2 buffered to pH=7.50 and containing 0.10 M NaEDTA. Does Hg(OH)2 precipitate from the solution? Ksp Hg(OH)2 = 3.0*10^-26
The concentration of free Hg²⁺ ions in the solution is extremely low, which is much less than the solubility product of Hg(OH)2, Ksp= 3.0×10⁻²⁶. Therefore, Hg(OH)₂ will not precipitate from the solution.
Describe Solution?A solution is a homogeneous mixture of two or more substances. In a solution, the solute is uniformly dispersed in the solvent. The solute can be a solid, liquid, or gas, while the solvent is usually a liquid, such as water.
Solutions can be classified as dilute or concentrated, depending on the amount of solute present in the solution. A dilute solution has a low concentration of solute, while a concentrated solution has a high concentration of solute.
To determine whether Hg(OH)₂ will precipitate from the solution, we need to calculate the concentration of free Hg²⁺ ions in the presence of EDTA⁻⁴. We can use the formation constant (Kf) of HgEDTA⁻² to calculate the concentration of HgEDTA⁻² complex ion:
Hg²⁺ + EDTA⁻⁴ → HgEDTA⁻², Kf = 6.3×10²¹
The equilibrium constant expression for this reaction is:
Kf = [Hg]/([Hg²⁺][EDTA⁻⁴])
We can rearrange this equation to solve for the concentration of free Hg²⁺ ions:
[Hg²⁺] = [HgEDTA⁻²]/(Kf[EDTA⁻⁴])
We are given that the concentration of Hg(NO3)2 is 0.025 M, which means the concentration of Hg²⁺ ions is also 0.025 M. We can assume that all the Hg²⁺ ions are complexed with EDTA⁻⁴, so the concentration of HgEDTA⁻² complex ion is also 0.025 M.
Therefore,
[ Hg²⁺] = [HgEDTA⁻²]/(Kf[EDTA⁻⁴])
[ Hg²⁺] = (0.025 M)/(6.3×10²¹ × 0.10 M)
[ Hg²⁺] = 3.97 × 10⁻²⁷ M
The concentration of free Hg²⁺ ions in the solution is extremely low, which is much less than the solubility product of Hg(OH)2, Ksp= 3.0×10⁻²⁶. Therefore, Hg(OH)2 will not precipitate from the solution.
To know more about ions visit:
https://brainly.com/question/30133364
#SPJ1
Enter your answer in the provided box. An element has two naturally-occurring isotopes. The mass numbers of these isotopes are 121.00 u and 123.00 u, with natural abundances of 90% and 10%, respectively. Calculate its average atomic mass. Report your answer to 2 decimal places.
Answer:
Kk I got it now but I think it to be great
A graduated cylinder with water reads 15.5 mL. If 20.50 g of copper is dropped in, what will the new water level be in the graduated cylinder?
The new water level in the graduated cylinder will be 17.79 mL. When an object is submerged in a liquid, it expels a volume-equivalent amount of liquid.
How does one interpret volume measurements on a graduated cylinder using the meniscus?With your eyes level with the liquid and the graduated cylinder placed on a flat surface, measure the liquid's height. The liquid will slant downward naturally. The meniscus is the name of this curvature. Always read the measurement on the meniscus's bottom.
Density = mass / volume
With the above formula, we can obtain the volume of the copper. This can be obtained as follow:
Mass of copper = mass/volume
Density of copper = 8.96 g/mL
Volume of copper = Mass of copper / Density of copper
Volume of copper = 20.50 g / 8.96 g/mL
Volume of copper = 2.29 mL
we shall determine the new height of the water. This can be obtained as follow:
Initial height of water = 15.5 mL
Volume of copper = 2.2 mL
New water level = Initial water level + Volume of copper
New water level = 15.5 mL + 2.29 mL
New water level = 17.79 mL
To know more about the water level visit;
https://brainly.com/question/24679715
#SPJ1
If you calculate the percent completion of elements in a compound is there enough information to determine the empirical formula for the compound
Answer:
Combustion analysis
Explanation:
Combustion analysis can only establish a compound's empirical formula; it cannot establish the compound's molecular formula.
Identify the precipitate that forms (if any) when aqueous solutions of strontium nitrate and potassium sulfate are mixed.
1. SrSO4(s)
2. SrK(s)
3. NO3SO4(s)
4. KNO3(s)
Answer:Srasao4(a)
Explanation:
What is the minimum volume of a 2.34 M NaOH solution needed to make 150.0 mL of a 0.800 M NaOH solution?
375 mL
25.6 mL
51.3 mL
1.2 * 10^2 mL
63.3 mL
Answer: 51.3 mL.
Explanation:
To calculate the minimum volume of a 2.34 M NaOH solution needed to make 150.0 mL of a 0.800 M NaOH solution, we can use the formula:
M1V1 = M2V2
Where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume.
We want to find the initial volume, so we can rearrange the formula to solve for V1:
V1 = (M2V2) / M1
Substituting the given values, we get:
V1 = (0.800 mol/L x 0.150 L) / 2.34 mol/L
V1 = 0.0513 L or 51.3 mL (rounded to 3 significant figures)
Therefore, the minimum volume of a 2.34 M NaOH solution needed to make 150.0 mL of a 0.800 M NaOH solution is 51.3 mL. Answer: 51.3 mL.
ILL mark YOU as a brainlist
What is the mass of 6.30 moles of magnesium chloride, MgCl2 ?
Express your answer with the appropriate units.
If an EMT has 5g of Dextrose and if the volume of the water is 121 mL, what is the concentration of the solution the EMT can make in molarity?
The concentration of the dextrose solution that the EMT can make is 0.2295 M.
How to calculate the molarity of the solution ?We need to know the number of moles of dextrose in the solution and the total volume of the solution.
First, we need to convert the mass of dextrose from grams to moles using its molar mass. The molar mass of dextrose (C6H12O6) is 180.16 g/mol. Therefore:
Number of moles of dextrose = 5 g / 180.16 g/mol = 0.02777 mol
Next, we need to calculate the total volume of the solution in liters. We can convert the given volume of 121 mL to liters by dividing by 1000:
Total volume of solution = 121 mL / 1000 = 0.121 L
Finally, we can calculate the molarity of the solution using the formula:
Molarity (M) = moles of solute / liters of solution
Molarity = 0.02777 mol / 0.121 L = 0.2295 M
Therefore, the concentration of the dextrose solution that the EMT can make is 0.2295 M.
Learn more about moles here : brainly.com/question/24191825
#SPJ1
A beaker contains a total of 500 ml of solution which is 0.00050 M Ag^+, 0.00050 M Pb^2+, and 0.00050 M in Mn^2+ ions. If 10.00 ml of 1.0*10^-6 M Na2CO3 is added to the beaker, what will precipitate?
Ksp Ag2CO3 = 8.1*10^-12
Ksp PbCO3 = 7.4*10^-14
Ksp MnCO3 = 8.8*10^-11
Only Ag2CO3 will precipitate from the solution.
Precipitation reactionWhen Na2CO3 is added to the solution, it will react with the Ag^+ and Pb^2+ ions to form precipitates of Ag2CO3 and PbCO3. The Mn^2+ ion concentration is not high enough to form a precipitate with Na2CO3.
First, let's calculate the initial concentration of Ag^+ and Pb^2+ ions in the solution:
Ag^+: 0.00050 M
Pb^2+: 0.00050 M
Next, we need to calculate the concentration of Na2CO3 after it is added to the solution. Since we added 10.00 ml of 1.0*10^-6 M Na2CO3 to a total volume of 500 ml, the final concentration of Na2CO3 is:
[Na2CO3] = (10.00 ml / 500 ml) * 1.010^-6 M
[Na2CO3] = 2.010^-8 M
Now we can use the Ksp values to determine which precipitates will form.
For Ag2CO3:
Ksp = [Ag^+]^2[CO3^2-]
8.110^-12 = (2x)^2 (2x)
8.110^-12 = 4x^3
x = 2.0*10^-4 M
Since the concentration of CO3^2- is higher than the solubility product, Ag2CO3 will precipitate.
For PbCO3:
Ksp = [Pb^2+][CO3^2-]
7.410^-14 = (0.00050 M)(2x)
x = 9.210^-11 M
Since the concentration of CO3^2- is lower than the solubility product, PbCO3 will not precipitate.
Therefore, the only precipitate that will form is Ag2CO3.
More on precipitation reactions can be found here: https://brainly.com/question/24158764
#SPJ1
The following are different combinations of mixtures. Mention the most suitable separation technique that may be used to separate the components and explain briefly how separation is achieved under the separation technique
A miscible solution of ethanol and water
A dye
A mixture of several components with different boiling points
A mixture of sand, table salt and iron fillings
Solid components from blood
The separation technique for each of the mixtures are:
miscible solution of ethanol and water ; fractional distillationdye ; Chromatographymixture of several components with different boiling points; DistillationA mixture of sand, table salt and iron fillings ; magnetSolid components from blood ; centrifugeWhat is separation technique?Separation techniques in chemistry are used to isolate or purify substances from a mixture. There are many different separation techniques used in chemistry, including:
Distillation: This technique is used to separate two or more liquids based on their boiling points. The mixture is heated until one of the liquids evaporates, and then the vapor is collected and condensed to separate it from the other liquids.
Filtration: This technique is used to separate a solid from a liquid or a gas. The mixture is passed through a filter, which traps the solid and allows the liquid or gas to pass through.
Chromatography: This technique is used to separate different components of a mixture based on their physical and chemical properties. The mixture is passed through a stationary phase, which separates the components based on their interactions with the phase.
Learn more about separation technique at:
https://brainly.com/question/10862519
#SPJ1
18. Why do metal cooking utensils have plastic handles to protect your hands from
heat?
A. Metal is an insulator, and the heat doesn't pass through it.
B. Metal contains more air pockets than plastic.
C. Metal isn't a good conductor, but plastic is.
D. Metal easily conducts heat, but plastic doesn't.
Answer: D. Metal easily conducts heat, but plastic doesn't.
Explanation: because plastic is a bad conductor of heat so the metallic pans are provided with handles made up of plastic to avoid hands getting burned due to the heat of the pan.
Fe2O3 (s) +3CO (g) ----> 2Fe (l) + 3CO2 (g)
how many moles of CO2 are produced by the reaction of 64.0 mol of CO
The amount of CO2 produced by the reaction of 64.0 moles of CO is 64.0 moles.
According to the balanced chemical equation, 64.0 moles of CO react with Fe2O3:
Fe2O3 (s) + 3CO (g) ----> 2Fe (l) + 3CO2 (g)
We can see that 3 moles of CO2 are produced for every 3 moles of CO reacted. As a result, we can calculate the number of moles of CO2 using the mole ratio of CO2 to CO, which is 3:3 or 1:1. Because we have 64.0 moles of CO, we will produce the same amount of CO2, which is also 64.0 moles.
As a result, the amount of CO2 produced by the reaction of 64.0 moles of CO is 64.0 moles. These data help calculate the theoretical yield of a reaction and determine the stoichiometry of an equilibrated chemical equation.
More related to the balanced chemical equation :
https://brainly.com/question/23877810
Can someone please help me ASAP
Please write it on paper then upload the picture also please make it readable!
Calculating relative atomic mass of an element is ordered sequentially as followed:
Isotopes are varieties of the same type of atomHowever, they have more or less neutronsThey have the same amount of protonsRelative atomic mass is the average mass of the isotopesIt can be calculated as followsWrite down all the isotopes givenWrite down the percentage abundance for each isotope Multiply the % abundance by the RAM for each isotopeAdd together all of the values obtained in step 7Divide by 100Sometimes the answer can have a decimal value How to calculate RAM and percentage abundance?Part 2:
1. Relative atomic mass of Magnesium =
((23.99 x 0.787) + (24.99 x 0.1013) + (25.98 x 0.1117)) / 100 = 24.31 amu
a) Percentage abundance of silver-109 =
100% - 51.86% = 48.14%
b) Average atomic mass of silver = (106.90509 x 0.5186) + (108.90470 x 0.4814) = 107.8682 amu.
Learn more on relative atomic mass here: https://brainly.com/question/28882057
#SPJ1
Identify which type of arrow is most appropriate for each reaction.
1) Double arrow
2) Double arrow
3) Single arrow
4) Single arrow
5) Double arrow
6) Double arrow
What are the types of arrows used in a chemical reaction?In chemistry, there are several types of arrows used in chemical reactions to represent the movement of electrons or the direction of the reaction.
The double arrow arrow is used to indicate that the reaction is in equilibrium. It is often represented by two half-arrows facing opposite directions. It is common in the kinds of reactions that can go both ways.
Learn more about chemical reaction:https://brainly.com/question/29039149
#SPJ1
what is the number of molecules in 2.25 mol. of carbon dioxide molecules (CO2)
Answer:
1.36 x 10^24 molecules
Explanation:
1 mole of CO2 has 6.022 x 10^23 moles
=> 2.25 x 6.022 x 10^23 = 1.35495 x 10^24 or 1.36 x 10^24
The figure (Figure 1) shows the reaction of element A
(lavender spheres) with element B
(tan spheres). Write the balanced chemical equation for this reaction in terms of A
and B
.
Express your answer as a chemical equation.
The balanced reaction equation is; 4A + 6B2 ----> 4AB3
What is a balanced reaction equation?A balanced reaction equation is a chemical equation that shows the complete chemical reaction, with the same number of atoms of each element on both the reactant and product side. In other words, the total number of atoms of each element is equal on both sides of the equation.
Balancing a chemical equation involves adjusting the coefficients (numbers in front of the chemical formulas) in order to ensure that the number of atoms of each element is equal on both sides of the equation. This is important because in a chemical reaction, atoms are not created or destroyed, but only rearranged into new molecules.
Learn more about reaction equation:https://brainly.com/question/3588292
#SPJ1