Answer:
It was not fired from the client's gun because the chair slid only 3 centimeters . If it had been fired from the client's gun the chair would slid 25.82 centimeters.
Explanation:
According to the law of conservation of momentum the momentum of the system before collision must be equal to the momentum of the system after the collision.
M1u1= m2u2
Let M1 = mass of the chair = 20kg
m2= mass of the bullet= 10g= 0.001kg
u1= velocity of the chair before collision = zero m/s
u2 = velocity of the bullet before collision = zero m/s
v1= velocity of the chair after collision = ? m/s
v2 = velocity of the bullet after collision = 450 m/s
After collision their velocities change from u1 to v1 and u2 to v2 so
M1v1= m2v2
v1= m2v2/M1
v1= 0.01 *450/ 20= 0.225 m/s
Now according to the law of conservation of energy the energy of the system before collision must be equal to the energy of the system after the collision.
The energy of the chair after the bullet is hit is
KE of the chair + KE of the bullet= 1/2 (M)(v1)²+ 1/2 m(v2)²=
1/2 ( 20) (0.225 )² + 1/2 (0.01) (450)²
= 0.50625 + 1012.5= 1013.00625 Joules
Frictional force = Coefficient of kinetic force of wood on wood ( M+m) g
= 0.2* ( 20.01) 9.8= 39.2196 N
Work done by friction = frictional force * distance
If law of conservation of energy is applied the KE must be equal to the work done
KE = W
W= f*d
KE= F*d
d = KE/f= 1013.00625/ 39.2196= 25.82 cm
The chair did not move 25.82 cm .
It only moved 3 centimeter.
Hence the bullet fired was not from the client's gun.
A piston has an external pressure of 15.0 atmatm. How much work has been done in joules if the cylinder goes from a volume of 0.120 liters to 0.450 liters
Answer: Work done is - 501.56 J
Explanation:
Given that;
External pressure P = 15.0 atm
Volume V1 = 0.120 liters
Volume V2 = 0.450 liters
Work done = ?
we know that; Work = -Pdv
where P is pressure and dv is change in volume
so we substitute our values into the equation
Work = -15.0 × ( 0.450 - 0.120)
= -15 × 0.33
= - 4.95 atm/L
we know that;
1 atm.L = 101.325 J
so
- 4.95 atm/L = 101.325 J × -4.95 atm/L ÷
= - 501.56 J
Therefore Work done is - 501.56 J
HELP ASAP !!! !!!!!!!
Answer:
they are cooler than the rest if the sun
Help me guys please with this question
Answer:
[tex]\mid \vec C\mid=31.9[/tex]
Explanation:
Consider the vectors:
[tex]\vec A=9.4\mathbf{\hat{i}}-3.6\mathbf{\hat{j}}[/tex]
[tex]\vec B=-9.5\mathbf{\hat{i}}-13.4\mathbf{\hat{j}}[/tex]
Calculate the magnitude of
[tex]\vec C=-2\vec B-\vec A[/tex]
Substitute the values of the vectors:
[tex]\vec C=-2(-9.5\mathbf{\hat{i}}-13.4\mathbf{\hat{j}})-(9.4\mathbf{\hat{i}}-3.6\mathbf{\hat{j}})[/tex]
Operate and remove parentheses:
[tex]\vec C=19\mathbf{\hat{i}}+26.8\mathbf{\hat{j}}-9.4\mathbf{\hat{i}}+3.6\mathbf {\hat{j}}[/tex]
Operating both components separately:
[tex]\vec C=9.6\mathbf{\hat{i}}+30.4\mathbf{\hat{j}}[/tex]
Now find the magnitude of C:
[tex]\mid \vec C\mid=\sqrt{9.6^2+30.4^2}[/tex]
[tex]\mid \vec C\mid=\sqrt{1016.32}[/tex]
[tex]\mathbf{\mid \vec C\mid=31.9}[/tex]
If you jump upward with a speed of 1.70 m/s how high will you be when you stop rising?
Answer:
How long do you jump (sec) ?
Explanation:
a heavty downpour and thundrstorm is probably caused by
Zookeepers carry a stretcher that holds a sleeping lion. The total mass of the stretcher and lion is 175 kg. The lion's forward acceleration is 2 m/s2. What is the force necessary to produce this acceleration?
Answer:
350 N
Explanation:
Newton's second law:
∑F = ma
∑F = (175 kg) (2 m/s²)
∑F = 350 N
If the velocity of Homer the astronaut (mass =200 kg) is 5 m/s and he runs into and grabs his stationary pal Larry (mass = 150 kg), what is the new velocity of the astronauts after the collision?
We are given:
Homer the Astronaut:
Mass of Homer the astronaut(m1) = 200 kg
initial velocity of Homer the astronaut(u1) = 5 m/s
Larry the Pal:
Mass of Larry the Pal (m2) = 150 kg
initial velocity of Larry the Pal (u2) = 0 m/s
Since they will move together after the collision, they will have the same velocity:
v1 = v2 = V
Solving for the Final velocity:
from the law of conservation of momentum:
m1u1 + m2u2 = m1v1 + m2v2
since v1 = v2 = V:
m1u1 + m2u2 = V(m1 + m2)
replacing the variables with the given values
200 * 5 + 150 * 0 = V(200 + 150)
1000 = 350V
V = 1000 / 350
V = 2.86 m/s
Why does a watched pot never boil?
A 0.420 kg block of wood rests on a horizontal frictionless surface and is attached to a spring (also horizontal) with a 20.5 N/m force constant that is at its equilibrium length. A 0.0600 kg wad of Play-Doh is thrown horizontally at the block with a speed of 2.80 m/s and sticks to it. Determine the amount by which the Play-Doh-block system compresses the spring.
Answer:
leon
Explanation:
leom ofjfjbfbfdnns
How does the abundance of hydrogen and helium support the Big Bang Theory?
It is the proportion predicted to be present in the early universe.
The hydrogen and helium abundance helps us to model the expansion rate of the early universe.
In the abundance of hydrogen and helium, we can say that they account for nearly all the nuclear matter in today's universe.
In big Bang model, the universe is mostly light or protons.
This abundance of hydrogen and helium is consistent with this big bang model. The process of forming this hydrogen and helium is often called big bang nucleosynthesis.The Schramm's model for relative abundances indicate that helium is about 25% by mass and hydrogen about 73% with all other elements constituting less than 2%.
Several proponents of big Bang theory has proposed similar relative abundance for hydrogen and helium. In all it is clear that hydrogen and helium constitute of more than 98% of the ordinary matter in the universe.
Finally, the hydrogen and helium abundance helps us to model the expansion rate of the early universe.
Learn more here: https://brainly.com/question/24439982
what evidence do you that suggest water waves are transverse wave
Answer:
If you throw a pebble into a pond, ripples
spread out from where it went in. These
ripples are waves travelling through the
water. The waves move with a transverse
motion.
Explanation:
Fast and safe heart rate for workouts is called muscular strength? True or false
Answer:
False
Explanation:
Answer:
False
Explanation:
Hope this helped, Have a Wonderful Day/Night!!
a ball of mass 0.5 kg is at point with initial speed 4 m/s at height 10. what is the total energy
Answer:
The total energy is 53 Joule
Explanation:
Mechanical Energy
The mechanical energy of an object of mass m, speed v, and at a height h is:
[tex]\displaystyle E = m.g.h+\frac{mv^2}{2}[/tex]
The ball has a mass of m=0.5 Kg, a speed v = 4 m/s, and at a height of h=10 m. Thus the total energy is:
[tex]\displaystyle E = 0.5\cdot 9.8\cdot 10+\frac{0.5\cdot 4^2}{2}[/tex]
E = 49 J + 4 J = 53 J
The total energy is 53 Joule
How much thermal energy (in kcal) is required to change a 43 g ice cube from a solid at - 16.5 oC to steam at 11.5 oC above boiling
Answer:
The total thermal energy required is 8.93 Kcal
Explanation:
Given;
mass of the ice cube, m = 43 g
specific heat capacity of water, Cp = 4.18 J/gc
specific latent heat of fusion of ice, Cf = 334 J/g
First step, determine the heat needed to raise the temperature of the ice from -16.5 °C to 0° C
Q₁ = mCp[0 - (-16.5)]
Q₁ = 43 x 4.18(16.5)
Q₁ = 2965.71 J
Second step, determine the latent heat of fusion of ice at 0°C
Q₂ = mCf
Q₂ = 43 x 334
Q₂ = 14362 J
Third step, determine the quantity of heat required to raise the temperature of the water initially at 0°C to above 11.5 °C of boiling point of water.
The final temperature of the water = 11.5 °C + 100° C = 111.5 °C
Q₃ = mCp Δθ
Q₃ = 43 x 4.18 (111.5 - 0)
Q₃ = 20041 J
Total thermal energy required = Q₁ + Q₂ + Q₃
Total thermal energy required = 2965.71 J + 14362 J + 20041 J
Total thermal energy required = 37,368.71 J
Total thermal energy required = 8.93 Kcal
When a spring is compressed, the energy changes from kinetic to potential. Which best describes what is causing this change?
•work
•power
•gravitational energy
•chemical energy
Answer:
work
Explanation:
Answer:
A
Explanation:
The metric unit of power is _____.
Answer:
Watt
Explanation:
Power is defined as the work done by an object per unit time. Its mathematical form is given by :
[tex]P=\dfrac{W}{t}[/tex]
The SI unit of work done is Joules (J) and that of time is seconds (s).
J/s is equal to watts. Watt is the metric unit of power.
An oil refinery uses a Venturi tube to measure the flow rate of gasoline. The density of the gasoline is
ρ = 7.40 ✕ 102 kg/m3,
the inlet and outlet tubes, respectively, have a radius of 3.74 cm and 1.87 cm, and the difference in input and output pressure is
P1 − P2 = 1.20 kPa.
a) find the speed of the gasoline as it leaves the hose
b) find the fluid flow rate in cubic meters per second
Answer:
(a) V₂ = 1.86 m/s
(b) Q = 5.1 x 10⁻⁴ m³/s
Explanation:
(a)
The formula derived for Venturi tube is as follows:
P₁ - P₂ = (ρ/2)(V₂² - V₁²)
where,
P₁ - P₂ = Difference in Pressure of Inlet and Outlet = 1.2 KPa = 1200 Pa
ρ = Density of Gasoline = 7.4 x 10² kg/m³
V₂ = Exit Velocity = ?
V₁ = Inlet Velocity
Therefore,
1200 Pa = [(7.4 x 10²kg/m³)/2](V₂² - V₁²)
V₂² - V₁² = (1200 Pa)/(3.7 x 10² kg/m³)
V₂² - V₁² = 3.24 m²/s² ------------------- equation (1)
Now, we will use continuity equation:
A₁V₁ = A₂V₂
where,
A₁ = Inlet Area = πd₁²/4 = π(0.0374 m)²/4 = 1.098 x 10⁻³ m²
A₂ = Exit Area = πd₂²/4 = π(0.0187 m)²/4 = 2.746 x 10⁻⁴ m²
Therefore,
(1.098 x 10⁻³ m²)V₁ = (2.746 x 10⁻⁴ m²)V₂
V₁ = (2.746 x 10⁻⁴ m²)V₂/(1.098 x 10⁻³ m²)
V₁ = 0.25 V₂
using this value in equation (1):
V₂² - (0.25 V₂)² = 3.24 m²/s²
0.9375 V₂² = 3.24 m²/s²
V₂² = (3.24 m²/s²)/0.9375
V₂ = √(3.456 m²/s²)
V₂ = 1.86 m/s
(b)
For fluid flow rate we use the following equation:
Flow Rate = Q = A₂V₂ = (2.746 x 10⁻⁴ m²)(1.86 m/s)
Q = 5.1 x 10⁻⁴ m³/s
The formula for finding variables in a Venturi tube is shown below:
The speed of the gasolineP₁ - P₂ = (ρ/2)(V₂² - V₁²)
where, P₁ - P₂ is difference in pressure of Inlet and outlet, ρ = density, V₂ = exit velocity and V₁ is inlet velocity
P₁ - P₂ = 1.2 KPa = 1200 Pa
ρ = 7.4 x 10² kg/m³
V₂ = Exit Velocity = ?
V₁ = Inlet Velocity
We then substitute the variables into this equation.
P₁ - P₂ = (ρ/2)(V₂² - V₁²)
1200 Pa = [(7.4 x 10²kg/m³)/2](V₂² - V₁²)
V₂² - V₁² = (1200 Pa)/(3.7 x 10² kg/m³)
V₂² - V₁² = 3.24 m²/s² ------ equation (1)
The continuity equation A₁V₁ = A₂V₂ is then used
where,A₁ = Inlet area = πd₁²/4 = π(0.0374 m)²/4 = 1.098 x 10⁻³ m²
A₂ = Exit Area = πd₂²/4 = π(0.0187 m)²/4 = 2.746 x 10⁻⁴ m²
(1.098 x 10⁻³ m²)V₁ = (2.746 x 10⁻⁴ m²)V₂
V₁ = (2.746 x 10⁻⁴ m²)V₂/(1.098 x 10⁻³ m²)
V₁ = 0.25 V₂
We then substitute the value into equation 1
V₂² - (0.25 V₂)² = 3.24 m²/s²
0.9375 V₂² = 3.24 m²/s²
V₂² = (3.24 m²/s²)/0.9375
V₂ = √(3.456 m²/s²)
V₂ = 1.86 m/s
The fluid flow rate we use the following equation:This can be calculated using the formula
Flow Rate = Q = A₂V₂
= (2.746 x 10⁻⁴ m²)(1.86 m/s)
= 5.1 x 10⁻⁴ m³/s
How do you determine: how many significant figures should you to round to when doing addition and subtraction?
How long had the Romans ruled those regions?
precisely which regions?
Answer:
Romans have ruled for 450 years
Explanation:
When you turn off your bedroom lights, the kitchen lights can stay on. This is because your home is wired using which of the following? (AKS 10b / DOK 1)
A.
Fuses
B.
Series circuits
C.
Batteries
D.
Parallel circuits
When you turn off your bedroom lights, the kitchen lights can stay on. This is because your home is wired by using the series circuit. Hence, option B is correct.
What is a Series circuit?The amount of current in the flow circuits of each element in a series circuit is the same. This is due to the recent flow having a single path. The flow rate (marble speed) at any point in a circuit (tube) at any given moment in time has to be equal because electric current moves through a conductor like marble in a duct.
The requirement that all values (voltage, current, resistance, and power) relate to one another in terms of the identical two places in a circuit is a significant exception to Ohm's law.
Therefore, the wiring of the home is in series combination. So, option B is correct.
To know more about series circuit:
https://brainly.com/question/11409042
#SPJ2
A man walks 400 m in the direction 45° north of east. Represent this vector graphically by
selecting a scale and drawing a coordinate system.
Answer:
Explanation:
Coordinate system is one that describe the location of an object in a given plane. It implies the use of axes (coordinates) and points.
Given that the man in the question walks 400 m due north of east. The cardinal points can be used in this case, with the north and east cardinals as the required axis.
scale = [tex]\frac{length on drawing}{original length}[/tex]
= [tex]\frac{10}{400}[/tex]
= [tex]\frac{1}{40}[/tex]
scale = 1:40
This is a reduced scale which implies that 1 cm on the drawing is equal to 40 m on the original length.
The man's direction is [tex]45^{o}[/tex] north of east.
The graphical drawing of the vector is herewith attached to this answer.
When light is reflected, the incident rays are bent and change direction.
True
False
Answer: True
Explanation: When light is reflected off lets say a mirror it is bent and changes direction to bounce off of another wall or object. For example if you take a flash light and shine it into a mirror the light reflects into a different direction your welcome
When light is reflected, the incident rays return back in straight direction and never bends and make the material gleaming. Hence, the statement is false.
What is reflection ?Reflection is the phenomenon that, when waves incident on a material it returns back in straight direction. Both sound wave and light wave can be reflected. But, lightwaves are only reflected from transparent materials.
Reflection of light ray make the material surface gleaming like in a mirror. Similarly reflection of sound waves produces echos. The phenomenon in which the light wave bends in its direction when moving from one medium to the other is called refraction.
The measure of bending of light in a medium is called the refractive index of that medium. Hence, bending of light is not reflection and it is termed as refraction. Thus, the statement is false.
To find more on reflection, refer here:
https://brainly.com/question/2254222
#SPJ2
Morgan does 50 J of work with a lever
that has an efficiency of 92%. What is
the output work of the lever?
Answer:
46 J
Explanation:
Simply calculate the 92% of 50 Joules as:
0.92 * 50 J = 46 J
When were Earth’s landmasses first recognizable as the continents we know today? 10 million years ago 135 million years ago 180 million years ago 300 million years ago
Answer:
b
Explanation:
i took the test
Earth’s landmasses were first recognized as the continents we know today
135 million years ago.
Landmass is defines as a large area of land. It can also be referred to as the
continents we have today. There are seven types of earth landmasses and
they are
Asia, Africa, North America, South America, Antarctica, Europe, and Australia.They were first discovered around 135 million years ago by the early
dwellers of the earth.
Read more on https://brainly.com/question/18125355
A ball has a diameter of 3.77 cm and average density of 0.0839 g/cm3. What force is required to hold it completely submerged under water?
magnitude _________ N
The force required to hold it completely submerged under water is 0.252 N
As a result of the low density (ρ1 = 0.0839 g/cm3 = 83.9 kg/m3)of the ball compared to that of water (ρ2 =1000 kg/m3), the buoyant force that is acting on the ball is greater than its weight.
Therefore, the minimum force required to hold the ball submerged under water can be calculated using the relation
F = Buoyant force - weight of sphere
Radius = 3.77/2 cm = 0.0377/2 m = 0.01885 m
Volume of sphere = 4/3 π r³ = 4/3 * 3.142 * 0.01885³ = 2.805 e-5 m³
Mass of sphere = 4/3 π r³ ρ1 = 4/3 * 3.142 * 0.01885³ * 83.9 = 0.0023 kg
Weight of sphere = 4/3 π r³ ρ1 g = 4/3 * 3.142 * 0.01885³ * 83.9 * 9.8 = 0.023 N
Volume of water displaced = 4/3 π r³ = 2.805 e-5
Buoyant force = weight of water displaced = 4/3 π r³ ρ2 g = 4/3 π r³ = 4/3 * 3.142 * 0.01885³ * 1000 * 9.8 = 0.275 N
F = 0.275 - 0.023 = 0.252 N
read more here https://brainly.com/question/18103369
The force required to hold it completely submerged under water is 0.25 N
The density of the ball ([tex]\rho_b[/tex]) = 0.0839 g/cm³ = 83.9 kg/m³
The density of water [tex]\rho_w[/tex] = 1000 kg/m³
Diameter = 3.77 cm = 0.0377 m
radius of ball = 0.0377/2 = 0.01885 m
The volume (V) = [tex]\frac{4}{3} \pi r^3=\frac{4}{3}*\pi*0.01885^3=2.8*10^{-5}\ m^3[/tex]
Let us assume the acceleration due to gravity (g) = 9.8 m/s², Hence:
The force is required to hold it completely submerged under water (F) is:
[tex]F=\rho_w Vg-\rho_b Vg=1000*(2.8*10^{-5})*9.81-83.9*(2.8*10^{-5})*9.81\\\\[/tex]
F = 0.25 N
Find out more at: https://brainly.com/question/19054414
A 4.80 g bullet moves with a speed of 170 m/s perpendicular to the Earth's magnetic field of 5.00×10−5T.
Part A
If the bullet possesses a net charge of 1.06×10−8 C , by what distance will it be deflected from its path due to the Earth's magnetic field after it has traveled 1.00 km ?
Answer:
[tex]3.24\times 10^{-7}\ \text{m}[/tex]
Explanation:
m = Mass of bullet = 4.8 g
v = Velocity of bullet = 170 m/s
B = Magnetic field of Earth = [tex]5\times 10^{-5}\ \text{T}[/tex]
q = Charge of bullet = [tex]1.06\times 10^{-8}\ \text{C}[/tex]
a = Acceleration
Time the bullet will be in the air for is [tex]t=\dfrac{1000}{170}=5.88\ \text{s}[/tex]
Force is given by
[tex]F=ma[/tex]
Magnetic force is given by
[tex]F=qvB[/tex]
So
[tex]ma=qvB\\\Rightarrow a=\dfrac{qvB}{m}\\\Rightarrow a=\dfrac{1.06\times 10^{-8}\times 170\times 5\times 10^{-5}}{4.8\times 10^{-3}}\ \text{m/s}^2[/tex]
From the linear equations of motion we have
[tex]s=ut+\dfrac{1}{2}at^2\\\Rightarrow s=0+\dfrac{1}{2}\times \dfrac{1.06\times 10^{-8}\times 170\times 5\times 10^{-5}}{4.8\times 10^{-3}}\times 5.88^2\\\Rightarrow s=3.24\times 10^{-7}\ \text{m}[/tex]
The defelection of the bullet is [tex]3.24\times 10^{-7}\ \text{m}[/tex]
Romeo is a 68 kg astronaut. Juliet is a beautiful cosmonaut who is standing on the balcony of a 4.58 x 10^5kg space station that is at rest and out of gas. Romeo is floating 25 meters away from the space station’s center of mass, how strong is the force between Romeo and Juliet?
Answer:
F = 3.32 x 10⁻⁶ N
Explanation:
The force of attraction between two masses is given by Newton's Law of Gravitation, as follows:
F = Gm₁m₂/r²
where,
F = Force between Romeo and Juliet = ?
G = Universal Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²
m₁ = mass of Romeo = 68 kg
m₂ = mass of space station = 4.58 x 10⁵ kg
r = distance = 25 m
Therefore,
F = (6.67 x 10⁻¹¹ N.m²/kg²)(68 kg)(4.58 x 10⁵ kg)/(25 m)²
F = 3.32 x 10⁻⁶ N
A shell traveling with speed, v0 , exactly horizontally and due north explodes into two equal mass fragments. It is observed that just after the explosion one fragment is traveling vertically up with speed v0 . What is the velocity of the other fragment? Hint: Velocity has both magnitude and direction.
Answer:
yeah
Explanation:
yeah yeah yeah yeah
Intense physical activity that requires little oxygen but uses short bursts of energy is called Anaerobic exercise? True or false 
answer pls urgent pls
Answer:
Brittleness
Explanation:
Lustrous means shiny
sonorous means capable of producing a deep or ringing sound
and iron isn't brittle or weak
Answer:
[tex]\huge\boxed{\sf brittleness}[/tex]
Explanation:
Iron is a metal which have luster (shine) so it is lustrous (shiny).
Iron is sonorous. When it is hit with a hard object, it produces ringing sounds.
Iron is not brittle. It cannot be easily broken. So, Iron does not show brittleness (It cannot be easily broken)
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AnonymousHelper1807