Whoever answers correctly with an detailed answer will get BRAINLIEST!!!

Answer:

The answer is A. Container 1.

Explanation:

Based on the data provided, Container 1 is most likely the one in which photosynthesis was not occurring. This is because the amount of CO2 remaining in Container 1 after 2 days was 100 cubic centimeters, which is the highest amount of CO2 remaining among all four containers. This suggests that the plants in Container 1 did not use as much CO2 for photosynthesis as the plants in the other containers, indicating that photosynthesis was likely not occurring at the same rate as in the other containers. The other containers all had less CO2 remaining, suggesting that photosynthesis was occurring more efficiently in those containers.

Why is it A? Container 1 is where the plant probably didn't do photosynthesis because it had the most CO2 left after 2 days, while the other containers had less CO2 left. This means that the plant in Container 1 did not use as much CO2 for photosynthesis as the plants in the other containers, suggesting that photosynthesis was not occurring at the same rate as in the other containers.

Hope this helps!! :]

Simply put, probability is the likelihood that something will occur. When we don't know how an event will turn out, we might discuss the likelihood or likelihood of several outcomes.

Yellow fruit = 40%

Red fruit = 100-40

= 60%

= 0.6

Fuzzy fruit = 30%

Hairless fruit = 100-30

= 70%

= 0.7

The probability for red and hairless fruit = 0.6*0.7

= 0.42

= 42%

The number for red and hairless fruit = 100*0.42

= 42

The probability is often defined as the proportion of positive outcomes to all outcomes in the sample space. Probability of an event P(E) = (Number of positive outcomes) is how it is stated (Sample space).

Learn more about probability,

https://brainly.com/question/30034780

#SPJ1

Most psychoneuroimmunologists would likely agree that the immune system works in close conjunction with other body systems.

Psychological processes, the nervous system, and the immune system are interconnected, with the brain and the immune system having both direct and indirect connections.

The fields of psychology, neuroscience, and immunology have all provided evidence that psychological and neurological factors can influence the functioning of the immune system and vice versa. Psychological factors, such as stress and mood, have been linked to a variety of physiological reactions in the body, including inflammation and changes in immune function. This indicates that psychological processes and the nervous system may play a role in immune function modulation.

This interdisciplinary approach has led to the development of the field of psychoneuroimmunology, which studies the complex interactions among these systems.

Psychoneuroimmunology is the study of the impact of psychological and social factors on the immune system and the body's response to disease. The concept of psychoneuroimmunology has emerged as a result of recent developments in neuroimmunology, which is the study of the nervous system and the immune system's interactions.

Therefore, they will most likely not agree that the immune system works completely independently of other body systems or that there are no direct connections between the brain and the immune system, only indirect ones. The endocrine system and the immune system also interact with one another, and there is a growing body of research on the role of hormones such as cortisol and epinephrine in immune system function.

Thus, psychoneuroimmunologists may not agree that the endocrine system works completely independently of other body systems.

Learn more about Psychoneuroimmunology:

https://brainly.com/question/13795923

#SPJ11

Answer:

negative effect on health of high sugars content in foods are:

1. weight gain

2. fatty liver disease

Answer: One negative effect on health of high sugar content in foods is that it can lead to an increased risk of developing type 2 diabetes. When we consume too much sugar, our body releases insulin to help regulate our blood sugar levels. Over time, consistently high levels of insulin can cause our cells to become less sensitive to insulin, leading to insulin resistance. This can then lead to the development of type 2 diabetes, a chronic condition that can have serious long-term health consequences. In addition to diabetes, high sugar intake has also been linked to obesity, heart disease, and other health problems.

brainliest please ??? (:

Answer:

blood clotting

Explanation:

Sweating and shivering are negative feedback, your coach complimenting you has nothing to do with homeostasis ;)

Answer:

B Physical properties appear only after a chemical change occurs.

Explanation:

Answer:D

Explanation: Genetics are often times how creatures adapt to their environment and often times start as mutations that just work, therefore protecting an organism from a death from natural selection.

The sperm concentration and count are 0.75 million/ml and 3 million sperms, respectively, using a 1:20 dilution of a specimen with a capacity of 4 ml, 30 sperm are enumerated in two big squares (WBC) of the Neubauer hemocytometer.

To calculate the sperm concentration and sperm count, we can use the following formulas:

Sperm Concentration (per ml) = Number of sperm counted / (Volume of diluted specimen used * Dilution factor)

Sperm Count = Sperm Concentration * Original specimen volume

In this case, the volume of the specimen is 4 ml, and it was diluted 1:20 (i.e., a 1 ml sample was mixed with 19 ml of diluent). Therefore, the volume of diluted specimen used is:

The volume of diluted specimen used = Specimen volume / Dilution factor

= 4 ml / 20

= 0.2 ml

Next, we count 30 sperm in two large squares (WBC) of the Neubauer hemocytometer. The volume of each large square is 0.2 x 0.2 x 0.1 mm3 = 0.004 mm3.

So, the number of sperm per ml in the diluted specimen is:

Sperm Concentration (per ml) = Number of sperm counted / (Volume of diluted specimen used * Dilution factor)

= 30 / (0.2 ml * 20)

= 0.75 million/ml

To calculate the sperm count, we can use:

Sperm Count = Sperm Concentration * Original specimen volume

= 0.75 million/ml * 4 ml

= 3 million sperm

Therefore, the sperm concentration in the original specimen is 0.75 million sperm per ml, and the sperm count is 3 million sperm.

Learn more about the Neubauer hemocytometer:

https://brainly.com/question/30983609

#SPJ11

In a cross section of the aorta and surrounding regions, the vein that is visualized superficial to the aorta and the origins of the right and left renal arteries and deep to the superior mesenteric artery is the left renal vein.

Cross-sectional imaging is a useful method for visualizing the left renal vein. The left renal vein (LRV) is a vital structure that has a significant impact on the diagnosis and treatment of abdominal disorders. The LRV's shape and dimensions in cross-sectional imaging modalities are variable, which may lead to diagnostic errors.

This might be especially relevant in planning surgeries or vascular interventional procedures.

Let us briefly discuss the different blood vessels that are found in a cross-section of the aorta: Renal arteries: The kidneys' blood supply is provided by the right and left renal arteries. The left renal artery is longer than the right renal artery because it has to pass posterior to the superior mesenteric artery to enter the left kidney.

Aorta: The aorta is a large, thick-walled blood vessel that emerges from the heart's left ventricle. It transports oxygen-rich blood to the body's major organs and tissues. It has three layers: the intima, media, and adventitia.

Superior mesenteric artery: It is one of the three unpaired anterior branches that emerge from the abdominal aorta's anterior surface. It arises from the aorta at L1 and descends behind the pancreas before entering the mesentery. It supplies blood to the midgut and pancreas.

In a cross-sectional view, the left renal vein (LRV) lies anterior to the aorta and posterior to the superior mesenteric artery. It is usually significantly shorter than the right renal vein (RRV) and runs horizontally across the L2 vertebra. It is joined by the left gonadal vein and sometimes the left suprarenal vein.

To know about left renal vein, refer here:

https://brainly.com/question/30701156#

#SPJ11

Answer:

300,000

Explanation:

because 12,000 X25

The cells that form a protective barrier to the vascular system of a root and prevent water from leaking out under pressure from the stele are the endodermis cells.

The endodermis cells form a continuous cylinder around the root, known as the endodermic cylinder, through which all materials must pass before reaching the stele. This cylinder is composed of a thick band of tightly packed cells with a waxy cuticle, which prevents water from passing through and maintains pressure in the stele.

The epidermal cells of a root form a protective barrier to the vascular system, where all materials must move through the symplast and prevent water from leaking out under pressure from the stele.

In botany, symplast is a continuum of living plant tissues consisting of the cytoplasm of living cells and the plasmodesmata that interconnect them. This means that the symplast is the living component of the plant, with every living cell containing a part of it that is contiguous with other living cells, forming a continuous cytoplasmic space that extends through the entire plant.

It should be noted that water can be lost through the cuticle and cell wall of root hairs, which is not related to the stele. To prevent water from being lost, the root endodermis, a single layer of cells enclosing the vascular tissue, can be selectively permeable to water, causing it to move into the xylem via the apoplast rather than the symplast, where it can be transported up the plant.

Learn more about the symplast:

https://brainly.com/question/30391834

#SPJ11

Canine teeth in wolves are a structural adaptation.

The direction of blood travel can be determined by the “tail”, or “cast-off wave” of the blood stain on a surface. Examining the direction of bloodstain is called Blood Pattern Analysis (BPA).

The angle of blood stain can be demarcated by a Swipe pattern, Splatter pattern, or Wipe pattern on transferring to an examination slide with a chemiluminescent dye. The said patterns point out the blood direction and the assault committed in the following steps:

• A characteristic tail pattern is formed on the application of chemical dye on the blood stain which points to the direction of the blood drops.

• The steeper the angle of the tail, the greater the force applied on the victim measured by sine values.

• The splatters indicate enormous force applied on the victim, that impacts through the air before landing on a surface.

• Transfer patterns are medium-force assaults when blood soaks on direct contact between surfaces.

• The Wipe patterns are low-velocity assaults and show large blood drops than the other two mentioned above.

To know more about blood direction on the stain:

brainly.com/question/30753392

brainly.com/question/30654819

The complete question is:

How to determine in which direction the blood was traveling with the help of a blood stain?

From oldest to youngest, the rock layers are A, B, and C, with the fault and igneous intrusion cutting through them afterwards.

The Principle of Cross-cutting Relationships, which holds that rock formations that cut across other rocks must be younger than the rocks they cut over, is another essential component of relative dating. This idea makes sense when considering the formation of rocks.

The geologic structure that crosses another structure is considered to be younger than the structure it crosses, according to the cross-cutting relationships principle.

To know more about cutting visit:-

https://brainly.com/question/264225

#SPJ1

Two resources that bacteria will need to complete for as the population grows are : C. Space  D. Food

Bacteria are ubiquitous, free-living organisms and often consisting of one biological cell.

The bacteria will need food and space as the population grows larger. While light and oxygen may be important for some types of bacteria, the question specifies that bacteria are growing on a gel that provides nutrients, so it's safe to assume that they already have access to the necessary nutrients.

As the population of bacteria grows, they will need more space to spread out and access to more food to sustain their increased metabolism and growth. Oxygen may also become a limiting factor if population becomes too dense and uses up the available oxygen in Petri dish.

To know more about bacteria, refer

https://brainly.com/question/6941760

#SPJ1

16% of the population are non-tasters and are recessive for the tasting gene. This means that 48% of the population is either homozygous for the trait (able to taste the chemical PTC) or heterozygous for the trait (able to taste the chemical PTC but carrying a recessive gene). Therefore, the percentage of the population that is heterozygous for the trait is 48%.

If 16% of a population is unable to taste the chemical PTC, then the frequency of the recessive allele (t) in the population can be calculated using the Hardy-Weinberg equation:

[tex]p^{2} + 2pq + q^{2} = 1[/tex]

where p is the frequency of the dominant allele (T) and q is the frequency of the recessive allele (t).

Since the non-tasters are homozygous recessive (tt), we know that:

[tex]q^{2}[/tex] = 0.16

Taking the square root of both sides gives:

q = [tex]\sqrt{0.16}[/tex] = 0.4

Now, we can use the equation to calculate the frequency of the heterozygous genotype (Tt):

2pq = 2(0.6)(0.4) = 0.48

Therefore, approximately 48% of the population is heterozygous for the trait.

Learn more about the Hardy-Weinberg equation:

https://brainly.com/question/16823644

#SPJ11

In massively parallel sequencing techniques, the DNA to be sequenced is sheared into small pieces and small oligonucleotides called adapters are attached to the ends of the DNA fragments. These adapters serve two primary functions: to anneal to a PCR primer and to attach the DNA fragment to a solid substrate.

The adapters anneal to the PCR primers, which allows for the replication of the DNA fragment during the polymerase chain reaction (PCR). This PCR amplification step helps increase the number of copies of the DNA fragment so that it can be more easily sequenced.

The adapters also attach the DNA fragments to a solid substrate. This substrate could be a glass plate, an array, or beads, which allow for the physical separation of the DNA fragments during the sequencing process.

Therefore, the correct options for the blanks are Anneal to a PCR primer and Attach the DNA fragment to a solid substrate.

To know more about PCR primers, refer here:

https://brainly.com/question/14579965#

#SPJ11

The changes that occur during metaphase are highlighted in the section below in detail.

During metaphase, the spindle fibers attach to the centromeres of the chromosomes and align them in the center of the cell, the nuclear envelope breaks down, and microtubules move the chromosomes to opposite poles of the cell.

The centrosomes move to opposite poles of the cell, the kinetochores of the chromosomes attach to the spindle fibers, the chromosomes condense and become visible, and the asters form around the centrosomes.

In conclusion, the chromosomes are at their second-most compacted and coiled state during the mitotic phase of the eukaryotic cell cycle, known as metaphase.

Learn more about metaphase here:

https://brainly.com/question/13627503

#SPJ1

Alternative medicine includes a broad variety of therapeutic techniques that are not deemed traditional by the medical community, such as homoeopathy, plant therapies, naturopathy, chiropractic, acupuncture, and others. Some of these treatments are now recognised as being beneficial in certain circumstances.we received reports of unclear medication names. Valtrex (valACYclovir) and Valcyte are both antiviral medications (valGANciclovir). The generic names for these two drugs are remarkably identical, and both the brand and generic names begin with the prefix "val," adding to the appearance and sound-alike confusion.

Methylphenidate short-acting medicines are found in the following strengths: Substance Potency Ritalin 5 mg, 10 mg, and 20 mg, Ritalin SR 20 mg, and methylphenidate 5 mg, 10 mg, and 20 mg.

Doctors prefer to give long-acting stimulants and supplement with a short-acting medication if the long-acting drug's impact goes off. Dextro-methylphenidate is a methylphenidate variant found in Focalin and Focalin XR. This methylphenidate variant is more potent than its standard cousin.

The main causes of childhood obesity are lifestyle factors, such as insufficient exercise and a diet high in calories. Yet, it's possible that hormonal and genetic factors as well. Thus, option C is correct.

In order to evaluate the prevalence of obesity among Bangladeshi teenagers between the ages of 14 and 19 in this study, the survey and physical examination were only completed once.

Although various illnesses and genetics might contribute to obesity in adolescents, inactivity and ingesting more calories than necessary for activity level are the main causes of teenage obesity.

The participants in the trial were not followed over time to monitor changes in their weight or health status.

Therefore, To determine the prevalence of an illness or health condition in a community at a certain moment, cross-sectional studies are frequently performed.

Learn more about adolescents here:

https://brainly.com/question/9506316

#SPJ1

Humans have an S-shaped spine, which is unique to mammals due to bipedalism. This S-shaped spine results in many humans experiencing back pain.

According to Shubin, two common back problems humans experience are sciatica and spondylolisthesis. Sciatica is a condition caused by a herniated disk in the lower back that puts pressure on the sciatic nerve and causes pain and numbness in the leg and buttocks. Spondylolisthesis is a condition where one vertebra slips over the vertebra beneath it, leading to pain in the lower back and buttocks.

Learn more about bipedalism: https://brainly.com/question/20327797

#SPJ11

Answer:

Introduction:

The field of medicine is vast and diverse, with numerous areas of study that are constantly evolving. One area of study that has gained significant attention in recent years is the field of immunology. Immunology is the study of the immune system and its response to various diseases and infections. In this report, we will explore the specific topic of autoimmune diseases, which are conditions in which the immune system attacks healthy cells in the body.

Body of Information:

Autoimmune diseases are a group of disorders that occur when the immune system mistakenly attacks healthy cells in the body. There are over 80 different types of autoimmune diseases, including rheumatoid arthritis, lupus, multiple sclerosis, and type 1 diabetes. These diseases can affect any part of the body, including the skin, joints, muscles, and organs.

The exact cause of autoimmune diseases is not yet fully understood, but it is believed to be a combination of genetic and environmental factors. Some autoimmune diseases are more common in certain ethnic groups, suggesting a genetic component. Environmental factors such as infections, toxins, and stress can also trigger autoimmune diseases in susceptible individuals.

Diagnosis of autoimmune diseases can be challenging, as symptoms can vary widely and may mimic other conditions. Blood tests, imaging studies, and biopsies are often used to diagnose autoimmune diseases. Treatment options for autoimmune diseases include medications to suppress the immune system, as well as lifestyle changes such as diet and exercise.

One area of research in autoimmune diseases is the development of new treatments that target specific components of the immune system. For example, biologic drugs that target specific immune cells or proteins have been developed for the treatment of rheumatoid arthritis and other autoimmune diseases. Stem cell therapy is also being investigated as a potential treatment for autoimmune diseases.

Summary:

Through our research on autoimmune diseases, we have learned several key facts. First, autoimmune diseases are a group of disorders in which the immune system attacks healthy cells in the body. Second, there are over 80 different types of autoimmune diseases, which can affect any part of the body. Third, the exact cause of autoimmune diseases is not yet fully understood, but it is believed to be a combination of genetic and environmental factors. Fourth, diagnosis of autoimmune diseases can be challenging, and treatment options include medications to suppress the immune system and lifestyle changes. Finally, ongoing research is focused on developing new treatments that target specific components of the immune system.

Bibliography:

1. American Autoimmune Related Diseases Association. (2021). Autoimmune Diseases. Retrieved from https://www.aarda.org/diseaselist/

2. National Institute of Allergy and Infectious Diseases. (2021). Autoimmune Diseases. Retrieved from https://www.niaid.nih.gov/diseases-conditions/autoimmune-diseases

3. Mayo Clinic. (2021). Autoimmune Diseases. Retrieved from https://www.mayoclinic.org/diseases-conditions/autoimmune-diseases/symptoms-causes/syc-203 autoimmune diseases.

The efficiency of the wedge is approximately 55.56%.

The efficiency of the wedge can be calculated using the formula:

Efficiency = (Work output / Work input) x 100%

Where work output is the useful work done by the wedge, and work input is the total work done on the wedge.

In this case, the work input is the force multiplied by the distance the wedge is pushed into the log:

Work input = Force x Distance

⇒                 = 900 N x 0.1 m

⇒                 = 90 J

The work output is given as 50 J.

Therefore, the efficiency of the wedge is:

Efficiency = (50 J / 90 J) x 100%

⇒               = 55.56%

As a result, the wedge's efficiency is approximately 55.56%. This means that only 55.56% of the total work done on the wedge is converted into useful work, while the remaining energy is lost due to factors such as friction and deformation.

To know more about the Wedge, here

https://brainly.com/question/8853593

#SPJ4

A significant grasshopper population increase could benefit frogs as they are a common predator of grasshoppers.

Frog:With more grasshoppers available, frog populations could increase as they have a readily available food source. However, if grasshopper populations become too large and start to damage vegetation, the resulting loss of habitat and food could negatively impact frog populations in the long term.

Grasshoppers: A significant grasshopper population increase, such as during a locust swarm, would likely result in a population boom for grasshoppers themselves. With more resources available, grasshoppers could reproduce and grow their population size rapidly. However, once the swarm has exhausted available resources, the population may crash, and many individuals may die off.

Snakes: A significant increase in the grasshopper population could benefit snakes that prey on them. Snakes would have more prey available to them, which could lead to population growth. However, if grasshopper populations become too large and start to damage vegetation, the resulting loss of habitat and food could negatively impact snake populations in the long term.

Producers: A significant grasshopper population increase could have a negative impact on producers such as plants and crops. Grasshoppers are herbivores that can cause extensive damage to vegetation, especially during a locust swarm. This could result in crop failures and reduced plant growth, which could have negative consequences for the entire ecosystem, including other animals that rely on producers as a food source.

For such more question on grasshopper

https://brainly.com/question/9425671

#SPJ4

The feedback mechanism of hormone release is a regulatory process by which the production and release of hormones such as estrogen and progesterone are controlled in response to changes in the body's internal and external environment.

Increased levels of estrogen and progesterone will result in positive feedback to the anterior pituitary to increase LH and FSH production. This normally occurs during the follicular stage.

Low levels of estrogen and progesterone will result in negative feedback to the hypothalamus to decrease GnRH production. This normally occurs during the luteal stage.

Extremely high levels of estrogen near the end of the follicular phase will result in positive feedback to the hypothalamus and anterior pituitary to release a large amount of LH to trigger ovulation.

Some hormones are used in oral contraceptive pills to suppress the release of FSH and LH. Without FSH, immature follicles do not develop into a mature ovum, and without LH, a mature ovum is not released into the Fallopian tube.

Learn more about estrogen at: https://brainly.com/question/8862412

#SPJ1

Complete question:

Drag and drop the missing words from the list below to complete the following sentences. Words may be used more than once.

Increased levels of estrogen and progesterone will result in ____ feedback to the anterior pituitary to ____ _____

production. This normally occurs during the ____

Low levels of estrogen and progesterone will result in ____ feedback to the hypothalamus to _____ _____

production. This normally occurs during the _____

Extremely high levels of estrogen near the end of the follicular phase will result in ____ feedback to the hypothalamus and anterior pituitary to release a large amount of ____  to trigger ovulation.

Some hormones are used in oral contraceptive pills to suppress the release of ____  without ____ a mature ovum is not released into the Fallopian tube and without ____ immature follicles do not develop into a mature ovum.

negative

positive

increase

decrease

LH

FSH

LH and FSH

GnRH

follicular stage

luteal stage

a. Silkworms:

The possible genotype ratio for the offspring of parents CC * cc is 100% Cc, where all offspring will be heterozygous for the yellow cocoon trait. The phenotype ratio will be 100% yellow cocoon, as the dominant C allele will be expressed.

Codominance is a form of inheritance in which both alleles of a gene are expressed equally in the phenotype of a heterozygous individual. In codominance, neither allele is dominant over the other, and both are fully expressed in the phenotype of an individual.

For example, in the ABO blood group system, there are three alleles: A, B, and O. Alleles A and B are codominant, meaning that if an individual has both alleles, they will express both A and B antigens on their red blood cells. If an individual has only one A or B allele, they will express the corresponding antigen on their red blood cells. The O allele is recessive, meaning that it will only be expressed if an individual has two copies of the O allele.

b. Guinea pigs:

The possible genotype ratio for the offspring of parents Ff * ff is 50% Ff and 50% ff. The phenotype ratio will be 50% short fur and 50% white fur, as the dominant F allele will be expressed in Ff individuals and the recessive f allele will be expressed in ff individuals.

c. Mice:

The possible genotype ratio for the offspring of parents Ee * Ee is 25% EE, 50% Ee, and 25% ee. The phenotype ratio will be 75% black eyes and 25% red eyes, as the dominant E allele will be expressed in individuals with EE or Ee genotypes, while the recessive e allele will be expressed in individuals with ee genotype.

d. Four-o-clock plants:

The possible genotype ratio for the offspring of parents ff * Ff is 50% Ff and 50% ff. The phenotype ratio will be 100% pink flowers, as both the dominant F allele and the recessive f allele will be expressed in individuals with Ff genotype, resulting in a codominant pink flower phenotype.

To know more about antigens, visit:

https://brainly.com/question/24384193

#SPJ1

Silkworms , All of the offspring of parents CC × cc will be heterozygous for the yellow cocoon trait, with a possible genotype ratio of 100 percent Cc.

Because the dominant C allele will be expressed, the phenotype ratio will be 100 percent yellow cocoon.

Codominance is a type of inheritance in which a heterozygous person's phenotype is the same for both alleles of a gene. In codominance, neither allele is more dominant than the other, and an individual's phenotype fully reflects both.

There are, for example, three alleles in the ABO blood group system: A, B, and O. Alleles A and B are codominant, which means that if a person has both, their red blood cells will express both A and B antigens. Red blood cells will express the corresponding antigen if a person only has one A or B allele. The O allele is recessive, which means that a person can only have two copies of the O allele.

For the offspring of parents Ff × ff, the possible genotype ratio is 50% Ff and 50% ff. As the dominant F allele will be present in Ff individuals and the recessive F allele will be present in ff individuals, the phenotype ratio will be 50/50 short fur to white fur.

25% EE, 50% Ee, and 25% ee are the possible genotype ratios for the children of Ee × Ee. As the dominant E allele will be expressed in individuals with EE or Ee genotypes and the recessive E allele will be expressed in individuals with ee genotype, the phenotype ratio will be 75% black eyes and 25% red eyes.

The potential genotype ratio for the offspring of parents ff × ff is fifty percent Ff and fifty percent ff. Because individuals with the Ff genotype will express both the dominant F allele and the recessive F allele, resulting in a codominant pink flower phenotype, the phenotype ratio will be 100% pink flowers.

Learn more about antigens :

brainly.com/question/24384193

#SPJ1

Answer:

To find the speed (S), we need to use the formula:

S = D / T

where D is the distance traveled and T is the time taken.

Substituting the given values, we get:

S = 5 m / 200 s

Simplifying, we get:

S = 0.025 m/s

Therefore, the speed is 0.025 m/s.