Which ofthefollowingprocesses is endothermic?
A.Reactingsodium with water.
B. The use of petrol in an engine.
C. Distilling crude oil.
D. Burning fossil fuels.

True. The standard conditions for measuring thermodynamic properties such as enthalpy, entropy, and Gibbs free energy are well-defined and standardized.

These conditions are used to compare and evaluate the relative stability and reactivity of different chemical species. The standard conditions for measuring these properties include a concentration of 1.0 m for soluble aqueous species, pure solids and liquids, and

a partial pressure of 1 atm for gaseous species. This means that the molar concentration of soluble aqueous species is set at 1.0 mol/L, and the pressure of gaseous species is set at 1 atm.

Pure solids and liquids are considered to have an activity of 1, which means that they do not affect the thermodynamic properties.

These conditions are used to determine the standard thermodynamic properties of chemical reactions, which are used to predict the direction and extent of chemical reactions.

To learn more about : standard

https://brainly.com/question/29136034

#SPJ11

This weather map shows that there is a low pressure system in the north and a high pressure system in the south.

Weather is the study of atmospheric conditions that exist in a specific area over a short period of time. It is the sum of all atmospheric conditions including temperature, humidity, wind, air pressure, cloud cover and precipitation. Weather is an important factor in determining the temperature, humidity and other characteristics of the environment. It affects human activities such as agriculture, transportation and recreation. Weather is dynamic and constantly changing. It is affected by a variety of factors such as solar radiation, air pressure, ocean currents, land topography and human activities. Weather is also affected by climate, which is the average weather pattern over a long period of time. Understanding weather is important for many reasons, including to predict storms and floods, to plan for extreme weather events, and to prepare for natural disasters.

This weather map shows that there is a low pressure system in the north and a high pressure system in the south. The low pressure system is bringing cooler temperatures and precipitation, while the high pressure system is bringing warmer temperatures and clear skies. There is a cold front moving eastward from the north, and a warm front moving eastward from the south.

To learn more about weather

https://brainly.com/question/29709289

#SPJ9

Answer:

In order is 2, 3, 4, 1

Explanation:

It starts when you come into contact with a trigger that you inhale, swallow, or get on your skin. In response, your body starts to make a protein called IgE, which grabs onto the allergen. Then histamine and other chemicals get released into the blood.

The outcomes to the scan had been now not all similar. The pots with the pH of 5.0 had no growth whatsoever. The pots with the pH of 6.0 had little growth, each with only four blades of grass. The pots with a pH of 7.0 grew well, one pot with extra blades of grass than the other, an average of 11 blades of grass

Natural soil pH depends on the rock from which the soil was once fashioned (parent material) and the weathering procedures that acted on it—for instance climate, vegetation, topography and time. These approaches have a tendency to purpose a decreasing of pH (increase in acidity) over time.

There is disruption of nutrient absorption by way of the plants if it's pH increases, and hence, soil fertility is reduced, alkaline soil's pH does not lead to make bigger in nutrient absorption, soil illness does not happen.

Learn more about  effect of pH on plant growth here:

Yes, the reaction worked. Three key signals that suggest the reaction worked include the appearance of the product, the presence of the expected starting material, and the absence of any other byproducts.

The product, 1-methoxy-2-chloro-4-nitrobenzene, can be identified by its distinct color, smell, and boiling point. Additionally, if the expected starting material is present, then it shows that the reaction has taken place.

Lastly, the absence of any other byproducts such as unreacted starting material implies that the reaction was successful. All together, all three signals indicate that the reaction worked.

Know more about Three key signals here

https://brainly.com/question/31114075#

#SPJ11

In changing the size of the zinc electrode would not impact the voltage of the cell.

If the size of the zinc electrode were doubled, the cell voltage would stay the same. This is because the voltage of a cell is dependent on the difference in potential between the two electrodes, not their size.

Doubling the size of the zinc electrode would not change the potential difference between the zinc and copper electrodes, therefore the cell voltage would remain constant.

The only factor that would affect the cell voltage would be a change in the concentration or temperature of the electrolyte solution or a change in the material or surface area of the copper electrode.

To learn more about : electrode

https://brainly.com/question/18251415

#SPJ11

The sigma bond between b and f in tetrafluoroborate ion, bf4-, is formed by the overlap of the atomic orbitals of boron and fluorine. Specifically, each of which contributes one p orbital to form a sp3-p sigma bond.

In the tetrafluoroborate ion (BF4-), the bond between boron (B) and fluorine (F) is a sigma (σ) bond. The σ bond is formed by the overlap of atomic or hybrid orbitals.Boron in BF4- is sp3 hybridized, which means that it has four hybrid orbitals that are involved in bonding. Three of these hybrid orbitals are involved in bonding with three of the fluorine atoms, while the fourth hybrid orbital is used to form the σ bond with the fourth fluorine atom.Fluorine is a halogen and has the electron configuration of 1s2 2s2 2p5. In BF4-, each of the fluorine atoms is also involved in the formation of the σ bond with boron. Fluorine has three unpaired electrons in its 2p orbitals that can form a σ bond by overlapping with the sp3 hybrid orbital of boron.Therefore, the σ bond between boron and fluorine in BF4- is formed by the overlap of the sp3 hybrid orbital of boron and the 2p orbital of the fluorine atom.

Learn more about fluorine here

https://brainly.com/question/1940697

#SPJ11

the overlap integral simplifies to:

S = c1c2 + d1d2d1d2.

To calculate the overlap integral between two linear combinations of atomic orbitals on a carbon atom in ethene, we first need to express the orbitals in terms of the hydrogen-like atomic orbitals. Let's assume that the two orbitals are denoted as ψ1 and ψ2, and can be expressed as linear combinations of the hydrogen-like atomic orbitals ϕ1 and ϕ2 as follows:

ψ1 = c1ϕ1 + d1ϕ2
ψ2 = c2ϕ1 + d2ϕ2

where c1, d1, c2, and d2 are constants.

The overlap integral between these two orbitals can be calculated using the following formula:

S = ∫ψ1ψ2*dτ

where dτ represents the infinitesimal volume element.

Substituting for ψ1 and ψ2, we get:

S = ∫(c1ϕ1 + d1ϕ2)(c2ϕ1 + d2ϕ2)*dτ

Expanding the product, we get:

S = c1c2∫ϕ1ϕ1*dτ + c1d2∫ϕ1ϕ2*dτ + d1c2∫ϕ2ϕ1*dτ + d1d2∫ϕ2ϕ2*dτ

Since the hydrogen-like atomic orbitals are orthonormal, the integral of ϕ1ϕ2 and ϕ2ϕ1 will be zero. Therefore, we can simplify the expression as follows:

S = c1c2∫ϕ1ϕ1*dτ + d1d2∫ϕ2ϕ2*dτ

Using the orthonormality of the hydrogen-like atomic orbitals, we know that the integral of ϕ1ϕ1 and ϕ2ϕ2 will both be equal to 1. Therefore, the overlap integral simplifies to:

S = c1c2 + d1d2d1d2.

In order to calculate the value of S, we need to know the values of the constants c1, d1, c2, and d2. These constants will depend on the specific linear combinations of atomic orbitals that we are considering. Without this information, we cannot calculate the value of the overlap integral.

Visit to know more about Integral:-

brainly.com/question/22008756

#SPJ11

If two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene, then value of the overlap integral [tex]S_{12} = \int{\phi_{1}}^{*}\phi_{2}d \tau[/tex], is equals to zero. So, option(b) is correct.

Orthonormal atomic orbitals are follow the following property:

Now, we have provide that two orbitals are as a linear combinations of two atomic orbitals on carbon atom in ethene. [tex]\phi_{1 } = \frac{1}{ \sqrt{2} } ( {\psi_{2s }} + {\psi_{2p }}_{2})[/tex]

[tex]\phi_{2 } = \frac{1}{ \sqrt{2} } ( \psi_{2 s} - {\psi_{2p} }_{2})[/tex]

In the ethylene molecule, consists each carbon atom is bonded to two hydrogen atoms. Therefore, for the C-H, σ bond (sp²(C) - 1s(H)) in ethylene, the two sp² hybrid orbitals overlap with the 1s orbitals of the two hydrogen atoms. Let the hydrogen-like atomic orbitals, [tex]\psi_{2 s} and {\psi_{2p} }_{2}[/tex] are orthonormal to each other. So, the overlap integral [tex]S_{12} = \int{ \phi_{1}}^{*}\phi_{2}d \tau[/tex]

[tex] = \int \frac{1}{\sqrt{2}}( \psi_{2s} + {\psi_{2p} }_{2}) \frac{1}{\sqrt{2}}( \psi_{2s} - {\psi_{2p} }_{2})d \tau\\ [/tex]

[tex] = \frac{1}{\sqrt{2}}( \int \psi_{2s}\psi_{2s} d \tau + \int {\psi_{2p} }_{2}\psi_{2s} d \tau - \int \psi_{2s} {\psi_{2p}}_{2} d \tau - \int {\psi_{2p} }_{2} {\psi_{2p} }_{2} d \tau) \\ [/tex].

Using above formula, [tex]\psi_{2 s} [/tex] and [tex]{\psi_{2p} }_{2}[/tex] are orthonormal so, [tex]\int \psi_{2 s} {\psi_{2p} }_{2} d\tau = 0[/tex]. Also [tex]\psi_{2 s} [/tex] and [tex]\psi_{2 s}[/tex] are normalised so [tex]\int \psi_{2 s} \psi_{2 s} d\tau = 1[/tex]. Similarly [tex]\int {\psi_{2p} }_{2} {\psi_{2p} }_{2} d\tau = 1 [/tex].

Substitute all integral values in equation (1),

= 1 + 0 - 0 - 1

= 0

Hence, the required integral value is 0.

For more information about atomic orbitals, visit :

https://brainly.com/question/30911211

#SPJ4

Complete question:

given two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene:

[tex]\phi_{1 } = \frac{1}{ \sqrt{2} } ( {\psi_{2s }} + {\psi_{2p }}_{2})[/tex]

[tex]\phi_{2 } = \frac{1}{ \sqrt{2} } ( \psi_{2 s} - {\psi_{2p} }_{2})[/tex]

where the hydrogen-like atomic orbitals are orthonormal. what is the value of the overlap integral,

[tex] S_{12} = \int \phi_{1} \times \phi_{2}dr[/tex]

a) 1

b) 0

c) 1.5

d) 2

Ammonia ionizes only partially in water. Option 4 is correct.

When ammonia dissolves in water, it reacts with water to form ammonium ions (NH₄⁺) and hydroxide ions (OH⁻), according to the equation: NH₃ + H₂O ⇌ NH₄⁺ + OH⁻. However, this reaction is reversible and only a small fraction of ammonia molecules ionize to form ions. As a result, ammonia is classified as a weak electrolyte, meaning that it only conducts electricity weakly in solution.

Weak electrolytes are characterized by their partial ionization in solution, and they have relatively low electrical conductivity compared to strong electrolytes, which ionize completely in solution. Hence Option 4 is correct.

To learn more about Weak electrolytes, here

https://brainly.com/question/29771118

#SPJ4

The best describes her speed and velocity is; Her speed is 4. 4 m/s, and her velocity will be 0 m/s. Option A is correct.

Lila's speed will be calculated by dividing the total distance she covered by  time it took her to complete the race;

Speed = Total distance/Time

In this case, Lila will covered 4 laps, which is a total distance of 4 x 400 = 1600 meters. She completed the race in 6 minutes, which is 6 x 60 = 360 seconds. Therefore, her speed is;

Speed = 1600 meters / 360 seconds

Speed = 4.44 m/s (rounded to two decimal places)

Velocity, on the other hand, is a vector quantity that takes into account both speed and direction. Since Lila ran four laps around a circular track, she ended up at the same position where she started. However, her displacement (change in position) is zero, which means her velocity is also zero.

Hence, A. is the correct option.

To know more about velocity here

https://brainly.com/question/17127206

#SPJ4

--The given question is incomplete, the complete question is

"Lila is a track and field athlete. She must complete four laps around a circular track. The track itself measures 400 meters from start to finish and the race took her 6 minutes to complete. Which best describes her speed and velocity? A) Her speed is 4. 4 m/s, and her velocity is 0 m/s. B) Her speed is 1. 1 m/s, and her velocity is 0 m/s. C) Her speed is 0 m/s, and her velocity is 2400 m/s. D) Her speed is 4. 4 m/s, and her velocity is 4. 4 m/s"--

Answer:

condensation nuclei

Explanation:

The amount of excess reagent that will remain would be 11.76 g.

To determine the excess reagent in the reaction, we need to first determine which reactant is limiting and which reactant is in excess.

The balanced chemical equation for the reaction is:

6Na + Fe2O3 -> 3Na2O + 2Fe

The molar mass of Na is 23 g/mol, and the molar mass of Fe2O3 is 159.69 g/mol (2 x 55.85 g/mol for Fe + 3 x 16 g/mol for O).

Using the given masses, we can calculate the number of moles of each reactant:

According to the balanced chemical equation, 6 moles of Na react with 1 mole of Fe2O3. Therefore, the number of moles of Na required to react with 1.57 mol of Fe2O3 is:

(1.57 mol Fe2O3) x (6 mol Na/1 mol Fe2O3) = 9.42 mol Na

Since we only have 8.70 mol of Na available, it is the limiting reagent. This means that Fe2O3 is in excess.

To determine the amount of excess Fe2O3, we need to calculate how much Fe2O3 is required to react with 8.70 mol of Na:

(8.70 mol Na) x (1 mol Fe2O3/6 mol Na) x (159.69 g/mol Fe2O3) = 238.24 g Fe2O3

Since we only have 250 g of Fe2O3, the amount of excess Fe2O3 is:

250 g - 238.24 g = 11.76 g

Therefore, the amount of excess Fe2O3 left after the reaction is 11.76 g.

More on stoichiometry can be found here: https://brainly.com/question/29775083

#SPJ1

If 120 cm³ of oxygen gas is collected at 713.3 mm Hg pressure, the volume of the dry gas at STP is 0.102 cm³.

To solve this problem, we will use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:

PV = nRT

First, we need to convert the given conditions to the correct units. The temperature is already in Celsius, so we need to convert it to kelvins by adding 273.15:

T = 27 + 273.15 = 300.15 K

The pressure is given in millimeters of mercury (mm Hg), so we need to convert it to atmospheres (atm) to use in the ideal gas law. There are 760 mm Hg in 1 atm, so:

P = 713.3 mm Hg / 760 mm Hg/atm = 0.938 atm

Next, we can use the ideal gas law to find the number of moles of oxygen gas:

n = PV/RT = (0.938 atm)(120 cm³)/(0.08206 L·atm/(mol·K))(300.15 K) = 0.00454 mol

Finally, we can use the molar volume of a gas at STP (standard temperature and pressure) to find the volume of the dry gas at STP. At STP, the temperature is 273.15 K and the pressure is 1 atm. The molar volume of a gas at STP is 22.4 L/mol, so:

V = n(22.4 L/mol) = (0.00454 mol)(22.4 L/mol) = 0.102 cm³

Therefore, the volume of the dry gas at STP is 0.102 cm³.

Learn more about ideal gas law here:

https://brainly.com/question/28257995

#SPJ1

False. In a closed system, matter can not enter or exit that is there is no change in the matter of the system.

Three types of systems exist in nature:

1. Open System: In this system, the matter can interact with the surroundings or matter can enter or exit the system from the surrounding. Similarly, the energy of the system also interacts with its surroundings and can be lost or gained.

For example oceans etc.

2. Closed system: In this system, the matter is unable to interact with the surroundings that are matter can't exit or enter the system. While the energy of the system is able to interact with the surroundings.

For example Earth etc

3. Isolated system: In this system, both matter and energy are unable to interact with the surrounding. There is no exchange between matter and the energy of surroundings.

For example thermos-teel bottles etc.

Learn more about Open Systems:

https://brainly.com/question/28891854

#SPJ4

The rate of the reaction is directly proportional to the stability of the carbocation intermediate, and any changes in the solvent will affect the rate of the reaction.

In an SN1 reaction, the rate-determining step is the formation of a carbocation intermediate. The stability of the carbocation intermediate affects the rate of the reaction.

In this case, if 2-propanol (isopropanol) was used instead of 2-methyl-2-propanol (t-butanol), the rate of the reaction would decrease. This is because the carbocation intermediate formed in 2-propanol is less stable compared to the one formed in t-butanol.

The carbocation intermediate formed in t-butanol is tertiary, which is more stable than the one formed in isopropanol, which is secondary. This means that the reaction will be slower in isopropanol due to the less stable carbocation intermediate.

To learn more about : reaction

https://brainly.com/question/29470602

#SPJ11

Answer:

Explanation:

The pH of the solution is 10.80

The pH of the solution is 10.80.

Explanation: This can be calculated using the Henderson-Hasselbalch equation, which takes into account the acid dissociation constant (pKa) of the acid and the concentration of the acid and its conjugate base. The HCl dissociates completely in water, so it does not affect the pH calculation.

The methylamine acts as a weak base and reacts with water to form its conjugate acid, which determines the pH of the solution.

The pKb of methylamine is used to calculate its pKa, which is then used in the Henderson-Hasselbalch equation.

Refer to this link to know more about how to calculate the pH of a solution
https://brainly.com/question/30881040?referrer=searchResults

As a result, it is important to store NaOH in a dry and cool place, away from any sources of moisture or water.

NaOH, also known as sodium hydroxide, is a highly hygroscopic solid. This means that it can easily absorb moisture from its surroundings, including the air. When NaOH absorbs water, it can become more corrosive and potentially dangerous.

This is why it is also important to handle NaOH with care and wear appropriate protective gear, such as gloves and goggles. Additionally, any spills or leaks should be cleaned up immediately and properly disposed of according to local regulations.

By following these precautions, NaOH can be safely used in a variety of applications, including in the production of soap, paper, and textiles.

To learn more about : water

https://brainly.com/question/19491767

#SPJ11

The correct answer is option D. All of the above. It is necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube to prevent any accidents or injuries.

If sulfuric acid is added too soon, the solution may boil and the acid will spew out of the test tube, perhaps resulting in burns.

Sulfuric acid is also an endothermic reaction, which means it takes energy from its surroundings and has the potential to crystallise or cause the solution to harden.

Last but not least, adding the sulfuric acid gradually enables more precise measurement of the supplied sulfuric acid volume.

It is crucial to gradually add the sulfuric acid to the test tube mixture of p-cresol and acetic acid as a result of all these considerations.

Complete Question:

Why would it be necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube?

Options:

A.  To ensure accurate measurement of the volume of sulfuric acid added.

B. To prevent the solution from boiling and splattering the acidic solution out of the test tube.

C. To prevent the endothermic reaction from solidifying the solution.

D. All of the above.

To learn more about sulfuric acid visit:

https://brainly.com/question/10220770

#SPJ4

when molten CaF2 is electrolyzed by a current of 9.55 A for 19 h, approximately 136 g of calcium metal is produced.

To determine the mass of calcium produced when molten CaF2 is electrolyzed by a current of 9.55 A for 19 h, we'll use Faraday's Law of Electrolysis.

First, calculate the total charge passed through the electrolyte:
Charge (Q) = Current (I) × Time (t)
Q = 9.55 A × (19 h × 3600 s/h) = 653,940 C

Next, determine the number of moles of electrons (n):
n = Q / (Faraday constant F)
n = 653,940 C / (96,485 C/mol) ≈ 6.77 mol

The balanced equation for the electrolysis of CaF2 is:
2F- → F2 + 2e-
Ca2+ + 2e- → Ca

The mole ratio between calcium and electrons is 1:2. So, the number of moles of calcium produced is:
Moles of Ca = 0.5 × Moles of electrons
Moles of Ca = 0.5 × 6.77 mol ≈ 3.39 mol

Finally, calculate the mass of calcium:
Mass of Ca = Moles of Ca × Molar mass of Ca
Mass of Ca = 3.39 mol × 40.08 g/mol ≈ 136 g

To learn more about : calcium

https://brainly.com/question/29231164

#SPJ11

Here are some general steps you can follow to write a lab report:

Understand the purpose of the lab report: Before you begin writing, make sure you understand the purpose of the lab report. What are the objectives of the experiment? What are the research questions being investigated? What hypothesis is being tested?

Gather your data: Make sure you have all the data you need to write your report. This includes raw data, observations, and any notes you took during the experiment. Organize your data in a clear and logical manner so that you can easily refer to it when writing your report.

Write an outline: Create an outline for your report that includes the main sections you need to cover. These typically include an introduction, methods, results, discussion, and conclusion.

Write the introduction: The introduction should provide an overview of the experiment and explain its significance. You should also provide some background information to help the reader understand the context of the experiment.

Write the methods: In the methods section, describe the experimental design, materials used, and procedures followed. Be sure to include enough detail so that someone else could repeat the experiment.

Write the results: In the results section, present your data in a clear and organized manner. Use tables, graphs, and figures to help illustrate your findings. Make sure to include any statistical analyses you performed.

Write the discussion: In the discussion section, interpret your results and explain what they mean. Discuss any patterns or trends you observed and explain how they relate to the research question. Compare your results to previous research in the field, and discuss any limitations or potential sources of error.

Write the conclusion: The conclusion should summarize the main findings of the experiment and explain their significance. You should also discuss any future directions for research in the field.

Proofread and revise: Once you have completed your first draft, proofread your report carefully to check for errors and inconsistencies. Revise your report as necessary to make sure it is clear, concise, and well-organized.

Read more about lab report here:

https://brainly.com/question/29500102

#SPJ1

Energetic molecules such as NADH and ATP are often reactants of exergonic reactions.

Exergonic reactions are those that discharge energy and have a harmful Gibbs-free energy change. In these reactions, the reactants have more free energy than the products, so the excess energy is cast in the state of heat. An exergonic reaction is a chemical reaction where the shift in the free energy is negative.

Energetic molecules like NADH and ATP store energy in their chemical adhesives, which can be emitted in exergonic reactions to drive endergonic responses that need energy input. Therefore, they are usually employed as reactants in exergonic reactions.

To learn more about Exergonic reactions

https://brainly.com/question/30800156

#SPJ4

We can see that the hydrobromic acid is the limiting reagent because it is completely consumed when 0.599 mol of it reacts with 0.599 mol of ethanol. After the reaction is complete, there will be some excess ethanol left over.

To determine the limiting reagent, we need to compare the amount of moles of each reactant used in the reaction. We can calculate the number of moles of each reactant by dividing their mass by their molar mass. Let's assume the starting alcohol is ethanol and has a molar mass of 46.07 g/mol, and hydrobromic acid has a molar mass of 80.91 g/mol. Then we have:

Moles of ethanol = 81.3 g / 46.07 g/mol = 1.765 mol

Moles of hydrobromic acid = 48.5 g / 80.91 g/mol = 0.599 mol

According to the balanced chemical equation, the stoichiometric ratio of ethanol to hydrobromic acid is 1:1.

For such more questions on Hydrobromic acid:

https://brainly.com/question/31367861

#SPJ11

Answer:

data given

mass of NaCl 4.56

dissolved volume 20ml(0.02l)

density of solution 1.03g/ml

Required molality

Explanation:

molarity=m/mr×v

where

m is mass

mr molar mass

v is volume

now,

molarity=4.56/58.5×0.02

molarity =3.9

: .molarity is 3.9mol/dm^3

According to molal concentration, the concentration (in molality) of an aqueous solution of NaCl is 0.0047 mole/kg.

Molal concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molal concentration is moles/kg.

The molal concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molal concentration is calculated by the formula, molal concentration=mass/ molar mass ×1/mass of solvent in kg.

In terms of moles, it's formula is given as molal concentration= number of moles /mass of solvent in kg.

Substitution in formula gives the answer but first mass of solution is determined which  is density×volume= 1.03×20=20.6 g , mass of solvent= 20.6-4.56=16.05, thus molal concentration=4.56/58.5×1/16.05=0.0047 moles/kg.

Learn more about molal concentration,here:

https://brainly.com/question/4580605

#SPJ2

2,3-dimethylbuta-1,3-diene is not a structural isomer of hexyne. Option e is correct.

Structural isomers are molecules with the same chemical formula but different arrangements of atoms. Hexyne is a hydrocarbon with six carbon atoms and one triple bond. Option (e), 2,3-dimethylbuta-1,3-diene, is not a structural isomer of hexyne because it has a different number of carbon atoms and a different type of bond. It has four carbon atoms and two double bonds, whereas hexyne has six carbon atoms and one triple bond.

Options (a), (b), (c), and (d) are all structural isomers of hexyne because they have the same number of carbon atoms and the same type of bond but different arrangements of atoms. Hence, option e is correct.

To know more about isomer, here

brainly.com/question/13422357

#SPJ4

Okay, let's solve this step-by-step without using quadratics:

1) The equilibrium constant Kc = 0.36 means the equilibrium lies to the left. So there will be more N2O4 than NO2 at equilibrium.

2) The initial concentration of N2O4 is 0.1 mol dm^-3. Let's call this [N2O4]initial.

3) At equilibrium, the concentrations of N2O4 and NO2 will be [N2O4]equil and [NO2]equil respectively.

4) We know the equilibrium constant expression for this reaction is:

Kc = ([NO2]equil)^2 / [N2O4]equil

5) Setting this equal to 0.36 and plugging in 0.1 for [N2O4]initial, we get:

0.36 = ([NO2]equil)^2 / (0.1 - [NO2]equil)

6) Simplifying, we get:

0.036 = [NO2]equil^2

7) Taking the square root of both sides, we get:

[NO2]equil = 0.06 mol dm^-3

So the equilibrium concentration of NO2 is 0.06 mol dm^-3.

Let me know if you have any other questions! I can also provide a more step-by-step explanation if needed.

The pressure of gas is 1.05 atm when a 1.25 g sample of CO₂ is contained in a 750ml flask at 22.5°C.

Molecular weight of CO₂ is 1.25g ,Volume of CO₂ is 750ml,Temperature of CO₂ is 22.5°C and the gas constant is 0.08206 L atm/mol K.

Using the ideal gas law equation the pressure is found to be 1.05 atm.

To calculate the pressure of the gas, we can use the ideal gas law equation: [tex]PV=nRT[/tex]
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000: 750 ml = 0.75 L.
Next, we need to calculate the number of moles of CO₂ present in the flask. We can use the molecular weight of CO₂ to convert from grams to moles:

[tex]1.25 * (1 /44.01 ) = 0.0284 mol[/tex]
Now we can plug in the values into the ideal gas law equation:

[tex]PV=nRT[/tex]
[tex]P * 0.75 L = 0.0284 mol  * 0.08206 L*atm/mol*K * (22.5 + 273.15) K[/tex]
Simplifying and solving for P, we get:
[tex]P = (0.0284 * 0.08206 * 295.65) / 0.75 = 1.05 atm[/tex]
Therefore, the pressure of the gas in the flask is 1.05 atm.

Learn more about ideal gas law equation here:

https://brainly.com/question/15379358

#SPJ11

The hammer and the feather are dropped from  same height by the astronaut on the planet without the air. The feather will fell at the same rate as the the hammer.

The hammer and the feather are dropped from equal  height by the astronaut on the planet without the air. They were the essentially in the vacuum, and there was the no air resistance and because of the feather will fell at the same rate as compared to the hammer, the Galileo had to concluded that the hundreds of the years before.

All the objects that released together will fall at the same rate excluding the factor of the mass.

To learn more about astronaut here

https://brainly.com/question/16843793

#SPJ4

1) 5.1167 x 10²⁴atoms of chlorine. 2) 248.00 g. 3) 4.8825 x 10⁷ moles of helium. 4) 2.7757 x 10²⁴ atoms of sulfur.  5) Molar mass of Co (cobalt) is 58.93 g/mol.  6) Formula mass =  310.18 g/mol.

Sum of the atomic masses of all the atoms in chemical formula is called formula mass

1.)  Number of atoms = 8.500 moles x 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.

2.) Molar mass of oxygen is 16.00 g/mol. Therefore:

Mass of 15.50 moles of oxygen = 15.50 moles x 16.00 g/mol = 248.00 g.

3.) Molar mass of helium is 4.00 g/mol. Therefore, the number of moles of helium in 1.953 x 10⁸ g is:

Number of moles = 1.953 x 10⁸ g / 4.00 g/mol = 4.8825 x 10⁷ moles of helium.

4.) Molar mass of sulfur is 32.06 g/mol. Therefore, the number of moles of sulfur in 147.82 g is:

Number of moles = 147.82 g / 32.06 g/mol = 4.6084 moles of sulfur.

To find the number of atoms, we can use Avogadro's number again:

Number of atoms = 4.6084 moles x 6.022 x 10²³ atoms/mole = 2.7757 x 10²⁴ atoms of sulfur.

5.) Molar mass of Co (cobalt) is 58.93 g/mol.

6.) Ca₃(PO₄)₂ contains 3 calcium atoms, 2 phosphorus atoms, and 8 oxygen atoms.

Atomic masses of these elements are:

Calcium (Ca) = 40.08 g/mol

Phosphorus (P) = 30.97 g/mol

Oxygen (O) = 16.00 g/mol

Therefore, formula mass of Ca₃(PO₄)₂ is:

Formula mass = (3 x 40.08 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol)

= 120.24 g/mol + 61.94 g/mol + 128.00 g/mol

= 310.18 g/mol.

To know more about formula mass, refer

https://brainly.com/question/21334167

#SPJ1

Answer: NA = no of molecules / no of moles

NA = no of molecules × molecular weight /weight

Explanation: