Which of the following describes an ionic compound (or what is true for ionic compounds)?
a. It has a low melting points
b. It consists of shared electrons
c. It conducts electric current in water solution
d. It consists of two non-metals

Answers

Answer 1

Answer:

a b c

Explanation:

Answer 2

b. It consists of shared electrons

c. It conducts electric current in water solution

d. It consists of two non-metals

What are Ionic compound?

Ionic compounds are neutral compounds made up of positively charged ions called cations and negatively charged ions called anions.

For binary ionic compounds (ionic compounds that contain only two types of elements), the compounds are named by writing the name of the cation first followed by the name of the anion.

The properties of ionic compound are:

They form crystals. They have high melting points and high boiling points.They have higher enthalpies of fusion and vaporization than molecular compounds.They are hard and brittle.They conduct electricity when they are dissolved in water.They are good insulators.They consist of two non metals.

Therefore,

b, c, d are the correct answer.

Learn more about Ionic compounds here:

https://brainly.com/question/9167977

#SPJ2


Related Questions

When you sit in a chair, your body exerts a downward force on the chair. What
is the reaction force?
A. The floor pushes up on the chair.
B. The chair pushes down on the floor.
C. Earth's gravity pulls up on the chain
D. The chair pushes up on your body.

Answers

Answer:

ITS D !!!

Explanation:

IN ME WE TRUST

When you sit on the chair, your body will exert a downward force and in reaction, the chair pushes up on your body. Hence, option D is correct.

What is a Reaction Force?

A building experiences a reaction force when it rests against another object. Calculating the reaction forces at the supports as a result of the forces operating on the beam is a necessary step in the analysis of a beam structure. The reaction forces can be calculated using a free body diagram of the entire beam.

Corrosion can be caused by reaction forces. For instance, due to the system's increased stiffness, reaction forces increase when bearing clearances are reduced from 350 mm to 150 mm.

According to the question, when the body will exert a downward force that is mg due to gravity, the chair will make a normal reaction force which will be equal to the force applied by the body on the chair.

To get more information about Reaction Force :

https://brainly.com/question/14853868

#SPJ5

difference between fundamental unit and derived unit​

Answers

Answer:

Fundamental units are the units of the fundamental physical quantities in SI system. They are not formed from other units. There are a total of seven fundamental units such as meter, kilogram, ampere, and second. Derived units are those units that are used for derived quantities.

The photo shows dew drops that formed on the grass when temperatures
cooled during the night. Which change of state happened to form the dew?
A. Liquid to gas
B. Gas to liquid
C. Solid to gas
D. Gas to solid

Answers

Gas to a liquid
This is because of condensation
gas to liquid is the answer

How does the magnetic field created by the liquid outer core protect the Earth?

Answers

Answer:

The magnetic field protects the Earth from harmful particles that come from the Sun.

Question 4 of 20
Luke wraps a magnetized steel nail with several coils of insulated wire and
then connects the loose ends of the wire to a 10 W lightbulb. Which step
could he take next to get the lightbulb to light up?
O A. Replace the magnetized nail with a nonmagnetic metal to cause
an electric current to flow in the wire.
O B. Remove the magnetized nail from the wire coil to induce a
magnetic field that will flow through the wire.
C. Move the magnetized nail back and forth within the wire coil to
induce an electric current in the wire.
D. Add several more coils of the wire around the magnetized nail to
make a stronger electric current.
SUBMIT

Answers

Answer:

C. Move the magnetized nail back and forth within the wire coil to induce an electric current in the wire.

Hope this helps.

calculate your power in watts if you do 500 N*m of work picking up a dumbbell,and takes 5 s to perform that task?​

Answers

Answer:

100watts

Explanation:

Given parameters:

Workdone  = 500Nm

Time taken = 5s

Unknown:

Power in watts = ?

Solution:

Power is the rate at which work is done;

   Power  =[tex]\frac{workdone }{time}[/tex]

Input the parameters and solve;

   Power = [tex]\frac{500}{5}[/tex]  = 100watts

Jayden created a cell model using a glass bottle with a cork. He said that the cork could be opened to eliminate waste material that’s generated after digestion in the cell. A number of particles resembling organelles are in the bottle. Which organelle’s function will cause Jayden to open the cork to eliminate waste material?
A. chloroplast
B. cytoplasm
C. nucleus
D. lysosome
E. ribosome

Answers

Answer:

D. lysosome

Explanation:

A. chloroplast  - the role of the chloroplast is to trap light energy and perform photosynthesis

B. cytoplasm  - the cytoplasm is the fluid-filled space inside the cell

C. nucleus  - the nucleus houses the genetic material

D. lysosome  - This is the correct answer. Lysosomes trap and digest waste products in the cell and break them down into reusable components.

E. ribosome - the ribosomes are protein synthesis machines

An ant is crawling along a yardstick that is pointed with the 0-inch mark to the east and the 36-inch mark to the west. It starts at the 14-inch mark, crawls to the 20-inch mark, then moves to the 16-inch mark. What was the total distance the ant traveled?

Answers

Given :

An ant is crawling along a yardstick that is pointed with the 0-inch mark to the east and the 36-inch mark to the west.

It starts at the 14-inch mark, crawls to the 20-inch mark, then moves to the 16-inch mark.

To Find :

The total distance the ant traveled.

Solution :

Total distance travelled by ant = (distance between 14 and 20 inch mark) +

                                                      (distance between 20 and 16 inch mark)

Total distance = (20-14 ) + ( 20-16) = 6 + 4 = 10 inch.

Therefore, total distance the ant traveled is 10 inch.

Hence, this is the required solution.

How do electromagnetic waves affect you?

Answers

Answer:

At low frequencies, external electric and magnetic fields induce small circulating currents within the body. ... The main effect of radiofrequency electromagnetic fields is heating of body tissues. There is no doubt that short-term exposure to very high levels of electromagnetic fields can be harmful to health.

What is weight? and what is mass

Answers

Hey :)

Weight is the force acting on the object due to gravity.

Mass is the measure of the quantity of matter that a body or an object contains

Hope this helps :)

A toy car rolls down a hill starting from rest. After 4.2 seconds its velocity is 18 meters per second. What is the acceleration of the car ?

SOMEONE PLZ HELP :(
WILL MARK BRAILIEST

Answers

Answer: if this is the same question I think it’s 24

Explanation:

A space shuttle orbits Earth at a speed of 21,000 km/hr. How far will it travel in 5 hours?

Answers

Answer:

105000km

Explanation:

Given parameters:

Speed of shuttle = 21000km/hr

Time of travel  = 5hrs

Unknown:

The distance covered by the space shuttle;

Solution:

Distance is the length of the path traveled.

   Distance  = speed x time

Input the parameters and solve;

     Distance = 21000km/hr x 5hrs

     Distance  = 105000km

How are velocity, wavelength, and frequency related

Answers

Answer:

The wave velocity and the wavelength are related to the wave's frequency and period by vw=λT or vw=fλ. The time for one complete wave cycle is the period T. The number of waves per unit time is the frequency ƒ. The wave frequency and the period are inversely related to one another.

Explanation:

Do) 13. Which image BEST represents our galaxy?

Answers

The second option !
Hope this helps

The best image of galaxy is second option.

What is galaxy?

Galaxies are vast systems of gravity-bound gas, dust, dark matter, and anything from a million to a trillion stars. Supermassive black holes are expected to be present at the centers of almost all big galaxies. The sun is merely one of 100 to 400 billion rotating stars in our own galaxy, the Milky Way.

There are more galaxies visible as we gaze farther into space. According to a 2016 study, there are two trillion, or two million million, galaxies in the observable universe. While some of those far-off systems resemble our own Milky Way galaxy, others are very dissimilar,

There are three general types of galaxies elliptical, spiral, and irregular.

So the best shape is second option elliptical with boundary.

To learn more about galaxy refer to the link:

brainly.com/question/24836631

 #SPJ5

A force of 75 N at an angle of 15° to the direction of motion moves a chair 3 m. Which change would result in more work being done on the chair?

Answers

Answer:

Decreasing the angle to 10

Explanation:

Edge 2020

an eager puppy runs in a straight line. its motion is shown on the following graph of horizontal position X vs time. What is the instantaneous speed of the puppy at t = 2s?

Answers

Answer: 0.25m/s

Explanation:

Answer:

Explanation:

Blab balh its 0.25 m/s

A gold puck has a mass of 12 kg and a velocity of 5i – 4j m/s prior to a collision with a stationary blue puck whose mass is 18 kg. After an elastic collision, the blue puck has a velocity of 2i – 2j m/s. What is the velocity of the gold puck after the collision?
A. 2i –j m/s
B. 3i –j m/s
C. 2i – 2j m/s
D. 3i – 2j m/s

Answers

Answer:

Explanation:D

The velocity of the gold puck after the collision is equal to (2i - j) m/s. Therefore, option (A) is correct.

What is velocity?

The rate at which a displacement of the body changes in relation to time is called its velocity. Velocity is a vector parameter with both magnitude and direction. S.I. unit of velocity can be represented as meter/second.

Given, the mass of the gold puck, m = 12 kg

The velocity of the gold puck before the collision, u =  5i – 4j m/s.

The mass of the stationary blue puck, M = 18 kg.

The velocity of it after the collision, V = 2i – 2j m/s.

We have to determine the velocity of the gold puck after the collision:

The total momentum of the system before the collision is equal to the total momentum of the system after the collision.

mu + M ×0 = mv + MV

v = u - MV/m

v  = (5i – 4j) m/s  - (2i – 2j)m/s × 18/12

v  = (5i – 4j) m/s - (3i - 3j)

v = (2i - j) m/s.

Therefore, the velocity of the gold puck is (2i - j) m/s after the collision.

Learn more about velocity, here:

brainly.com/question/18084516

#SPJ6

Why does sonar use ultrasound rather than sound?

Answers

Answer;  Ultrasonic waves (sounds having frequency greater than 20,000 Hz) are used in sonar because: ... Ultrasonic waves can penetrate water to long distances (because of their high frequency and very short wavelength), but ordinary sound waves or infrasonic waves cannot penetrate water to such long distances.

Answer:

Ultrasonic waves (sounds having frequency greater than 20,000 Hz) are used in sonar because: ... Ultrasonic waves can penetrate water to long distances (because of their high frequency and very short wavelength), but ordinary sound waves or infrasonic waves cannot penetrate water to such long distances

Explanation:

Which model of the atom has electrons traveling in specific paths around the nucleus? Bohr's model Rutherford's model Thomson's model Dalton's model

Answers

Answer:

A, Bohr's model

Explanation:

Took the quiz, hope it's right for you.

(The other three did have something to do with it they just didn't create that specific model)

The model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.

Therefore, the correct answer is option B

J. J Thomson proposed that the atom is a sphere of positively charged matter in which negatively charged electron are embedded.

In Rutherford's model of atomic structure, the electrons moves in orbits by electrostatic attraction to the positively charged nucleus.

According to Dalton's atomic theory, atom were indestructible and indivisible  solid particle.

Bohr's model made assumption that electron can only exist in circular orbits of definite quantum energy.  

According to the question, the model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.

Therefore, the correct answer is option B

Learn more here : https://brainly.com/question/16776207

A runner moves at an average speed of 3.0 m/s and covers 9.5 km. In seconds, how long does the run take?

28.5 s
29.0 s
3.16 s
3200 s

Answers

Answer:

3200 seconds

Explanation:

If he ran at 3 m/s for 28.5 seconds, he would have run 85.5 meters

29 seconds would be 87 meters run not 9.5 km

3200 s is the right answer

When a closed can is heated, the pressure inside it increases. This happens because

Answers

Answer:

the heat is growing the particles bigger

Explanation:

A unit is an amount used to measure something True or false

Answers

I do not know

hi I thinks the answer is Tralse

If you run east for 38m, stop suddenly, run another 27m east, then you run west for 47
m, what is your total displacement?
how to answer: #m, direction

Answers

Answer:

Total Displacement = -18m

Explanation:

Given

East Movement = 38m and 27m

West Movement = 47m

Required

Determine the total displacement

To answer this, we consider east as negative direction and the west as positive (using logics of number line).

Total Displacement = East Movement + West Movement

Total Displacement = -38m - 27m + 47m

Total Displacement = -18m

Hence, the total displacement is 18m towards East

5 grams is thes than greater than or equal too 508mg

Answers

Answer:

yes 5 is greater

Explanation:

Answer: 5 grams is greater than 508 milligrams. Even though the number '508' is larger than '5,' you need to look at the units.

what does the galaxy made of ?​

Answers

Galaxies are sprawling systems of dust, gas, dark matter, and anywhere from a million to a trillion stars that are held together by gravity. Nearly all large galaxies are thought to also contain supermassive black holes at their centers.

List out Units For: Acceleration

Answers

Acceleration units : M/s squared

Unit for Acceleration is m/s² or ms raised to -2

What will be acceleration due to gravity of a feather and coin if
they are dropped in vacuum?​

Answers

Explanation:

Hey there!

We know that the objects in vacuum falls equally on the surface or bottom. As there is no air resistance in vacuum, the objects has equal stabdard acceleration. (i.e g = 9.8m/s^2)

So, the acceleration due to gravity is 9.8m/s^2.

Hope it helps....

#7 If the Moon’s mass was suddenly tripled, what would occur to the gravitational force between the Earth and the Moon?
(A) Gravitational force would increase by a factor of 3.
(B) Gravitational force would decrease by a factor of 3.
(C) Gravitational force would increase by a factor of 9.
(D) Gravitational force would decrease by a factor of 9.

Answers

Answer:

well it would be (A) Gravitational force would increase by a factor of 3.

Explanation:

because the moon is the only thing that gained mass not the Earth

Dos pilotos suicidas, que están inicialmente a una distancia de 500 m entre sí, deciden chocar directamente de frente arrancando ambos desde el reposo. Ambos autos pueden desarrollar una aceleración máxima constante de 15 m/s2 . Si el piloto A arranca un segundo antes que el piloto B, encuentra: a) la posición donde los autos chocan, medida a partir de la posición donde arranca el piloto A, y b) la rapidez relativa de la colisión (la rapidez de B con respecto a A justo antes de la colisión, ó viceversa).

Answers

Answer:

a) El punto de colisión de los dos automóviles desde donde parte el conductor del automóvil A es de aproximadamente 293,14 metros.

b) La velocidad del automóvil A, en relación con la velocidad del automóvil B, es de 15 m / s

Explanation:

Los parámetros del movimiento son;

La distancia entre ambos coches = 500 m

La aceleración de ambos coches = 15 m / s²

La dirección de movimiento de ambos coches = uno hacia el otro

La hora de inicio del conductor A = Un segundo antes de la hora de inicio del conductor B

Por lo tanto, de la ecuación de movimiento, tenemos;

s = u · t + 1/2 · a · t²

v² = u² + 2 · a · s

Dónde;

u = La velocidad inicial de los autos = 0 (los autos parten del reposo)

t = El tiempo de movimiento de una aceleración dada

a = La aceleración = 15 m / s²

s = La distancia recorrida en el tiempo t

Por lo tanto, para el controlador A, tenemos;

s₁ = 0 × (t + 1) + 1/2 × 15 × (t + 1) ² = 7.5 × (t + 1) ²

s₁ = 7.5 × (t + 1) ²

Para el conductor B, tenemos;

s₂ = 0 × t + 1/2 × 15 × t² = 7.5 × t²

s₂ = 7,5 × t²

Dado que ambos chocan a lo largo del camino de 500 m, tenemos;

s₁ + s₂ = 500 metros

∴ 7.5 × (t + 1) ² + 7.5 × t² = 500

∵ s₁ + s₂ = 7.5 × (t + 1) ² + 7.5 × t²

Lo que da;

15 · t² + 15 · t + 7.5 = 500

15 · t² + 15 · t - 492,5 = 0

Resolver usando la aplicación en línea da; t = -6,25181 o t = 5,25181

Dado que t es un número natural, tenemos el valor correcto para t = 5.25181 segundos

a) Por tanto, el punto de colisión de los dos coches desde donde parte el conductor del coche A es;

s₁ = 7.5 × (t + 1) ² = 7.5 × (5.25181 + 1) ² ≈ 293.14 metros

El punto de colisión de los dos automóviles desde donde parte el conductor del automóvil A ≈ 293,14 metros

b) La semilla de A en el punto de colisión se da de la siguiente manera

Velocidad, v₁ = u + a × (t + 1) = 0 + 15 × (5.25181 + 1) ≈ 93.78

v₁ ≈ 93,78 m / s

La semilla de B en el punto de colisión también se da de la siguiente manera

Velocidad, v = u + a × (t) = 0 + 15 × 5.25181 ≈ 78.78

v₁ ≈ 78,78 m / s

Por lo tanto, la velocidad del automóvil A, en relación con la velocidad del automóvil B, [tex]v_{relative}[/tex] se da como sigue;

 = v₁ - v₂ = 93,78 m / s - 78,78 m / s = 15 m / s

la velocidad del automóvil A, relativa a la velocidad del automóvil B = 15 m/s.

An object is accelerating if there is a change in speed and which factor? A. direction B. displacement C. time D. position

Answers

Answer:

time bc speed uses time

Explanation:

hope it helps♡ ;)

An object is accelerating if there is a change in speed and there is a change in direction, therefore the correct answer is option A.

What is acceleration?

The rate of change of the velocity with respect to time is known as the acceleration of the object. Generally, the unit of acceleration is considered as meter/seconds².

Even if the magnitude of the velocity not changing even the change in the direction would lead to acceleration,

uniform circular motion is one of the best examples where the speed is constant but the direction is changing continuously

Thus, An object is accelerating if there is a change in speed and there is a change in direction, therefore the correct answer is option A.

To learn more about acceleration from here, refer to the link;

brainly.com/question/2303856

#SPJ2

Other Questions
What is the distance between the points (7, 8) and (-8, 0) on a coordinate grid? How did the three kingdoms period affect dynasties in China ? Which number represetns a coefficient?2347 The point where two rays meet is called a Solve the system, by elimination please show all the steps!-2x+2y+3z=0-2x-y+z=-32x+3y+3z=5 12 =7 solve. Bro wat does this mean i dont get it please help someone :\ Help pls idk how to do this idk if i will set it up right Why was the Proclamation of 1763 a cause of the American Revolution? A goblin makes 50 pounds of goo in 2 hours. What is the unit rate? From where did the Muslims learn the Greek knowledge?from BaghdadOfrom Romefrom books saved from conquestfrom capturing Greek philosophers The map below shows the location of some natural resources in North America. The map shows various natural resources across North America. In Mexico, the map indicates copper, silver, and iron are found. Across the United States, iron, oil, coal, copper, gold, and silver are found. In Canada, lead and zinc, coal, copper, oil, iron, gold, silver, and uranium are found. 2011 FLVSAccording to the map, which natural resource can only be found in Canada? Oil Silver Coal Uranium In the 1800s, the United States was still a very young nation, trying to solidify its identity. The Industrial Revolution began in Great Britain, a fast development of society following the introduction of machines. The United States was slower than Great Britain to fully embrace the changes. Yet key technological developments caused a rapid growth in American urban areas. Better farming methods and tools in the 1800s increased food production. Americans were able to grow enough food for their families as well as to sell. The abundance caused food prices to fall. The expansion of cotton and the growth of textile factories in northern states helped produce the first wave of American industry. More people turned to work in northern factories as a way to support their families. Thousands of immigrants to the United States also settled in or near port cities, looking for work. Even today, the need for work is a common reason people move to urban areas. As a result, cities grew in numbers of people and physical space. As more people and businesses moved in, they needed buildings for living and working. They needed ways to move around the city. We call this process urbanization. In 1820, the United States had only a few cities of 10,000 residents or more. About seven percent of U.S. residents lived in urban areas. The number of cities with more than 10,000 people grew quickly over the next 40 years, especially in the Northeast and Midwest. By 1860, about 20 percent lived in cities. Philadelphia and New York City were the most populated cities in 1860 and would soon reach one million residents. The urbanization of the United States quickened due to technology improvements. Without innovations in food production, the factories could not have grown so quickly. The trend quickened after 1860 and continued throughout the 21st century as well. By 2007, more Americans lived in or near cities than they did in rural areas. Select a sentence from the body of this article that can be removed without affecting the author's explanation. Place the sentence in quotes and explain why it is an unnecessary detail. Type your response in the box.Different kinds of substances have different properties. Compare and contrast the electrical properties of salts, acid , metals Which of the following is NOT an example of a residential treatment facility?A. counselingB. further educationC. job and coping skillsD. probation Match the qualitative characteristics below with the following statements.1. Timeliness2. Completeness3. Free from error4. Understandability5. Faithful representation6. Relevance7. Neutrality8. Confirmatory valuea. Quality of information that assures users that information represents the economic phenomena that it purports to represent.b. Information about an economic phenomenon that corrects past or present expectations based on previous evaluations.c. The extent to which information is accurate in representing the economic substance of a transaction.d. Includes all the information that is necessary for a faithful representation of the economic phenomena that it purports to represent.e. Quality of information that allows users to comprehend its meaning. what are all the fractions that are equivalent to 5/6 Meiosis produces which type of cells?O Haploid somatic cellsDiploid somatic cellsHaploid gametesDiploid gametes Which transition would work best between these sentences?Canals and railroads lessened the cost of moving goods. Prices fell on goods from across the country due to lower shipping costs. A. HoweverB. UndeniablyC. As a resultD. For example Electrons will pair up in an orbital only when Which of these is a way that politicians in the United States attempt to influence the media?