Which object might have the pattern of magnetic domains shown in the
image?
114 114
114 114
11 11
A. Cotton fabric near a magnet
O B. A piece of iron, not near a magnet
O C. A piece of iron near a magnet
D. Cotton fabric, not near a magnet

Answer:

Health relates to science because

in science you study, research, and knowledge in this case, health science, which helps you under stand more about how humans and animals function. And Physical education relates to science because , you study the way of human movement, think of push-ups as a example.

I hope I helped U ´꓃ ` U

boiling point Gatoride

Answer: 1 = Heat

2=gas

3=it gets hot enough to boil because the metal conducts the heat into the water to heat it up and eventually boil.

Explanation: its common sense

Answer:

the total work done is 90J

Explanation:

the reason why is because you are the force (30 newtons) and the metere (3) so you will be multiplying those two numbers together.

W= FD 30(3)= 90J

The time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.

Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.

The given data in the problem is;

t is the time is required

q is the charge = 20 Coulombs

I is the current is= 2 amperes

The formulas for the elctric current are given as;

[tex]\rm I = \frac{q}{t} \\\\\ \rm t = \frac{q}{I} \\\\ \rm t = \frac{20}{2} \\\\ t=10 \ sec[/tex]

Hence the time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.

To learn more about the electric current refer to the link;

https://brainly.com/question/2264542

The time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.

Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.

The given data in the problem is;

t is the time is required

q is the charge = 20 Coulombs

I is the current is= 2 amperes

The formulas for the electric current are given as;

[tex]I=\dfrac{q}{t}[/tex]

[tex]t=\dfrac{q}{I}[/tex]

[tex]t=\dfrac{20}{2}[/tex]

[tex]t=10 sec[/tex]

Hence the time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.

To learn more about the electric current refer to the link;

brainly.com/question/2264542

Answer:  10 m/s

We're told the speed is constant, so it's not changing throughout the time period given to us. So throughout the entire interval, the speed is 10 m/s.

Answer:

So waves are everywhere. But what makes a wave a wave? What characteristics, properties, or behaviors are shared by the phenomena that we typically characterize as being a wave? How can waves be described in a manner that allows us to understand their basic nature and qualities?

A wave can be described as a disturbance that travels through a medium from one location to another location. Consider a slinky wave as an example of a wave. When the slinky is stretched from end to end and is held at rest, it assumes a natural position known as the equilibrium or rest position. The coils of the slinky naturally assume this position, spaced equally far apart. To introduce a wave into the slinky, the first particle is displaced or moved from its equilibrium or rest position. The particle might be moved upwards or downwards, forwards or backwards; but once moved, it is returned to its original equilibrium or rest position. The act of moving the first coil of the slinky in a given direction and then returning it to its equilibrium position creates a disturbance in the slinky. We can then observe this disturbance moving through the slinky from one end to the other. If the first coil of the slinky is given a single back-and-forth vibration, then we call the observed motion of the disturbance through the slinky a slinky pulse. A pulse is a single disturbance moving through a medium from one location to another location. However, if the first coil of the slinky is continuously and periodically vibrated in a back-and-forth manner, we would observe a repeating disturbance moving within the slinky that endures over some prolonged period of time. The repeating and periodic disturbance that moves through a medium from one location to another is referred to as a wave.

Hope That Helps!!

Explanation:

Answer:

Try copy and pasting the intructions it into google, and it should pop up if it exists.

Hope this helps.

Explanation:

Answer:

Send me the download of the lab and I will complete it for you

Answer: C. Light energy.

Explanation:

‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎‎1500 kpm

Answer:

the answer is c. hope this help you out

The identification of the correct color of the light with the proper justification would be by student 4: violet, because it has the highest frequency, therefore the correct answer is option D.

It can be understood in terms of the distance between any two similar successive points across any wave for example wavelength can be calculated by measuring the distance between any two successive crests.

As given in the problem, students in a science class were provided with this image and asked to identify which color of light would refract the most if white light was passed through a prism.

Student 4 would correctly identify and justify violet as the appropriate hue of the light since it has the greatest frequency, making option D the right response.

To learn more about wavelength from here, refer to the link;

brainly.com/question/7143261

#SPJ2

Answer:

Range of projectile, R

For projection above ground surface, the range of the angle of projection with respect to horizontal direction, θ, is 0° ≤ θ ≤ 90° and the corresponding range of 2θ is 0° ≤ 2θ ≤ 180°.S

hope you're looking for this.

Answer:

striking and fielding

Explanation:

striking and fielding

Answer:

The way in which objects exert forces on each other is described by Newton’s 3rd law of motion

Explanation:

Objects with mass exert forces on each other via the force of gravity. This force is proportional to the mass of the two interacting objects and is inversely proportional to the square of the distance between them. The factors G, M, and rare the same for all masses at the surface of the Earth.

Answer:

12m/s2

Explanation:

:D (just a smiley, not answer d)

Answer:

The correct option is D. bloodstains

Complete question is;

A baseball bat is a lever. Which of the following explains how a baseball bat differs from a lever like a pry bar?

A) In a baseball bat, effort force is smaller and is applied over a large distance, while the resistance force is smaller and is applied over a long distance.

B) In a baseball bat, effort force is smaller and is applied over a large distance, while the resistance force is smaller and is applied over a short distance.

C) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a long distance.

D) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a short distance.

Answer:

C) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a long distance.

Explanation:

The correct answer is option C. This is because unlike in a pry bar, the effort force when swinging a baseball bat is larger and it is applied over a short distance; and in return the resisting force is smaller and it's applied over a long distance.

Answer:

I think the answer is B. Can I have brainlest if I am right, please?

Explanation:

Answer:

it is B because period =1/ frequency and B has lower period

Answer:

Negatively charged, to positively charged parts

Explanation:

Electrons are negative, negative is attracted to positive.

Answer:

The mechanical advantage of a machine is 2. Mechanical advantage MA is the ratio of output (generated by the machine) force to input (applied to the machine) force. So MA = 2 means that for example if you apply 100 N then your machine will multiply that force and generate 200 N .

Answer:

-47.04

Explanation:

Divide 12 m by 2.5 m/s which equals 4.8s

And then use 4.8s to multiply it with -9.8

4.8(-9.8)= -47.04 m/s

Hope this helped!! :)

The initial height of the pumpkin is 23.52m and the final vertical velocity of the pumpkin is 47.04 m/s.

Initial horizontal speed, u = 2.5 m/s

horizontal distance covered , d = 12m

So the time taken is:

t = d/u

t = 12/2.5 s

t = 4.8s

Now, the initial vertical speed, v = 0

So the vertical distance traveled by the pumpkin will be equal to the initial height of the pumpkin:

s = vt + ¹/₂gt²

s = 0.5 × 9.8 × 4.8 m

s = 23.52m

Final vertical velocity:

v' = v + gt

v' = 9.8 × 4.8 m/s

v' = 47.04 m/s

Learn more about laws of motion:

https://brainly.com/question/26083484?referrer=searchResults

Answer:

The time taken for the paint ball to hit the ground is [tex]t = 2.143 \ s[/tex]

The distance of the landing point from the tower is [tex]d = 192.86 \ m[/tex]

Explanation:

From the question we are told that

   The height of the tower is [tex]h = 45 \ m[/tex]

    The speed of the paintball in the horizontal direction is  [tex]v_x = 90 \ m/s[/tex]

Generally from kinematic equation we have that

      [tex]h = ut + \frac{1}{2} at^2[/tex]

Here u is the initial  velocity of the paintball in the vertical direction and the value is 0 m/s , this because the ball was fired horizontally

         a is equivalent to [tex]g = 9.8\ m/s^2[/tex]

        t is the time taken for the paintball to hit the ground

   So    

       [tex]45 = 0* t + \frac{1}{2} 9.8 * t^2[/tex]

=>    [tex]t = 2.143 \ s[/tex]

Generally the distance of its landing position from the tower is

         [tex]d = v * t[/tex]

=>      [tex]d = 90 * 2.143[/tex]

=>    [tex]d = 192.86 \ m[/tex]

Answer:

agear lever or agear stick is the lever that you use to change gear in acar or other vehicle

Answer:

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 3000 × 2

We have the final answer as

Hope this helps you