Answer:
a)oxygen and chlorine
b) H20+NaCl= NaOH + O+ Cl
c) Cl2+ Ca(OH)2=CaOCl2+CaCl2 +HCL
Explanation:
electricity splits up the molecules for water and hydrogen displaces chlorine because its is more reactive.
Which of the following are subatomic particles that orbit the outside of an atom?
A.
molecules
B.
electrons
C.
neutrons
D.
protons
Why do clothes stick together when coming out of a dryer? And do the clothes start off as neutral?
here is what came up when i searched it up:
"The attraction between protons and electrons can also make clothes stick together in the dryer. When you dry clothes in the dryer, different fabrics rub together, and electrons from a cotton sock (for instance) may rub off onto a polyester shirt."
Sometimes, clothes can get stuck together after they come out of a dryer because of static electricity.
No, clothes may not start off as neutral. Whether clothes have static charges before going into the dryer depends on different things.
Why do clothes stick together when coming out of a dryer?Static electricity happens when certain things touch and create an uneven amount of electrons. This can cause one material to have a positive charge and the other to have a negative charge. When clothes move and touch each other in a dryer, this rubbing can cause static electricity.
If the clothes are cleaned and dried correctly, they should have no charge or be evenly charged.
Read more about clothes here:
https://brainly.com/question/18269825
#SPJ6
13
0121
This question is about sodium and chlorine.
FIGURE 2 shows the positions of sodium and
chlorine in the periodic table.
FIGURE 2
CI
Na
02
State ONE difference and ONE similarity in t
electronic structure of sodium and of chlori
[2 marks]
The question is asking you to compare each elements electrons, specifically valence since it mentioned their placement on the table.
Similarly: they both are only one electron away from stability (a full octet)
Difference: Sodium will want to loose the one electron, and Chlorine will take it.
How many moles of acetaminophen are in a 0.8mL (0.0008L) dose of infants Tylenol
Answer:
0.007 mol
Explanation:
Step 1: Given data
Volume of acetaminophen: 0.8 mL
Step 2: Calculate the mass corresponding to 0.8 mL of acetaminophen
The density of acetaminophen is 1.26 g/mL.
0.8 mL × (1.26 g/mL) = 1 g
Step 3: Calculate the number of moles corresponding to 1 g of acetaminophen
The molar mass of acetaminophen is 151.16 g/mol.
1 g × (1 mol/151.16 g) = 0.007 mol
Write the electron configuration for Br, with 35 protons and 35 electrons.
Answer:
2 8 8 8 8 1
Explanation:
Which of the following elements would you expect to be ductile and
malleable?
Germanium (Ge)
Argon (Ar)
O O O O
Nitrogen (N)
O Zirconium (Zr)
Answer:
ductile - germanium
mellabe - zirconium
Liquid Nitrogen’s temperature is minus what degress
Answer:
-320f
Explanation:
Calculate the frequency of a wave that is 4.3 x 10^-11 m the speed of light 5 points
is 3x10^8 m/s *
1 Add file
PLEASE HELP
Calculate the wavelength of microwaves that have a frequency of 5.67 x 10¹¹ Hz. Please give your answer in scientific notation to the hundredths place. (Don't forget unit!) *
balance this chemical equation pleaseee
why is the moisture of cirrus clouds mostly in the solid state
Answer:
Wind is the horizontal movement of air, transporting energy transferred from the earth's surface as sensible and latent heat. Sensible heat is transferred by the processes of conduction and convection. Conduction transfers energy within a substance, and convection transfers energy through the vertical movement of the heated substance. Latent heat is the transfer of energy by transforming the substance itself. As you recall, water has the ability to exist as liquid, gas or solid. The transformation from liquid to gas is called evaporation; the reverse process, from gas to liquid, is called condensation; from liquid to solid is known as solidification (freezing); and from solid to liquid, fusion (melting). Water can also be transformed directly from solid to gas (sublimation), or the reverse, through a process called deposition. We will see these various processes in the formation of clouds.
Explanation:
if I did not give answer then i hope i at least helped!
Given the following equation:
2KMnO4 → K2MnO4 + MnO2 + O2
How many grams of KMnO4 are required to produce
1.60 grams of O2?
g
Mass of KMnO4 required : 31.607 g
Further explanationThe reaction equation is the chemical formula of reagents and product substances
A reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products
Reaction
2KMnO₄ → K₂MnO₄ + MnO₂ + O₂
mol of O₂ :
[tex]\tt \dfrac{1.6}{16}=0.1[/tex]
mol ratio KMnO₄ : O₂ = 2 : 1
mol of KMnO₄ :
[tex]\tt \dfrac{2}{1}\times 0.1=0.2[/tex]
mass of KMnO₄ :
MW KMnO₄ : 158,034 g/mol
[tex]\tt mass=0.2\times 158,034 =31.607~g[/tex]
7. Which of the following is always true when a substance undergoes a
phase change? *
O A. The molecules keep moving at the same average speed.
B. The substance becomes a liquid as it heats up.
C. The melting point of the substance changes.
D. The substance is made up of the same type of molecules.
The following answered has been deleted due to multiple violations to our Terms of Service.
Which of the following is not an example of biased language?
a.
“You are too short to reach that.”
b.
“Are you deaf?”
c.
“Move along, grandpa!”
d.
“I think I’ve been gypped.”
Answer:
I think it is D.
Explanation:
Answer:
b
Explanation:
why water can be consider as an acid as well as base .explain briefly
In sexual reproduction, how many genes does an offspring receive for each trait ♀️
Answer:
Each parent's half of the genes acquired by the offspring. They have two of each chromosome and hence two alleles of each gene, and one acquired from each parent.
5) If an atom has a positive charge what is it called?
Answer:
An atom that has a negative or positive charge it is called an ion.
Answer:
It''s called a Cation
Explanation:
Who is best associated with Psychoanalysis?
-Wilhelm Wundt
-Sigmund Freud
-William James
-None of the above
-Other:
Answer:
None of the above
Explanation:
Erikson's was a student of freud's and expanded of his theory of psychosexual development by emphasizing the importance of culture in parenting practices and motivations and adding three stages of adult development.
DESPERATE WILL GIVE BRAILIST AND THANKXS
Which statement is true about a rock layer deposited on top of another rock layer?
A- It is younger than the rock layer below.
B- It is older than the rock layer below.
C- It is the same age as the rock layer below.
D- It is no different than the rock layer below
Hello there!
Your answer is C.
Answer:
The right option is; A. It is younger than the rock layer below.
Explanation:
A rock layer deposited on top of another rock layer is younger than the rock layer below. This is based on the law of superposition which states that in any undeformed sequence of rocks that are laid down in layers, the youngest layer of rock will be on top of the sequence, while the oldest layer will be at the bottom of the sequence.
What does a particular point on a line of a phase diagram represent ?
Answer:
the line represents the condition where pressure and heat have the same effects.
Answer: C) The melting point of a substance at a specific pressure.
Hydrofluoric acid (HF) can be prepared according to the following equation:
CaF2 + H2SO4 2 HF + CaSO4.
How many grams of HF can be prepared from 75.0 g of H2SO4 and 63.0 g of CaF2?
In the above problem, which reactant is limiting and which is in excess?
Given the balanced equation:
( Reaction type : double replacement)
CaF2 + H2SO4 → CaSO4 + 2HFI
We can determine the number of grams prepared from the quantity of 75.0 H2SO4, and 63.0g of CaF2 by converting these grams to moles per substance.
This can be done by evaluating the atomic mass of each element of the substance, and totaling it to find the molecular mass.
For H2SO4 or hydrogen sulfate it's molecular mass is the sum of the quantity of atomic mass per element. H×2 + S×1 + O×4 = ≈1.01×2 + ≈32.06×1 + ≈16×4 = 2.02 + 32.06 + 64 = 98.08 u (Dalton's or Da) or g / mol.
For CaF2 or calcium fluoride, it's molecular mass adds 1 atomic mass of calcium and 2 atomic masses of fluoride due to the number of atoms.
Ca×1 + F×2 = ≈40.07×1 + ≈19×2 = 40.08 + 38 = 78.07 u (Da or Dalton's) or g / mol.
The limiting reactant in the given balanced reaction is sulphuric acid. The mass of HF produced from 75 g of H₂SO₄ is 30 g.
What is limiting reactant?The limiting reactant in a species is the reactant which is fewer in amount and thus determine the yield of the product.
In the given reaction, one mole of calcium fluoride reacts with one mole of sulphuric acid to give two moles of HF. The molar mass of calcium fluoride CaF₂ is 78 g/mol the weight taken here is 63 g. Thus number of moles is 63/78 = 0.87 moles.
The molar mass of sulphuric acid H₂SO₄ is 100g/mol. The weight taken here is 75 g and thus, number of moles is 75/100 = 0.75 moles. One mole of calcium fluoride need one mole of H₂SO₄ . Thus 0.87 neede 0.87 moles of H₂SO₄ . But here we have only 0.75. Thus it is the limiting reactant.
As per the reaction, one mole or 100 g of H₂SO₄ produce 2 moles or 40 g of HF (molar mass = 20 g/mol). Thus mass of HF produced from 75 g is calculated as follows:
mass of HF = (75 × 40)/100
= 30 g.
Hence, mass of HF produced in this reaction is 30 g.
To find more about limiting reactant, refer the link below:
https://brainly.com/question/2948214
#SPJ2
In each case, state whether the forces are balanced or unbalanced. If unbalanced, calculate the net force and describe the direction of the resultant force.
Answer:
Check explanation section.
Explanation:
In order to understand balanced force and unbalanced forces the first law of Newton should be considered as a basic knowledge.
For Balanced forces, there is equal equality in the direction of the forces. In balanced forces, there is no acceleration.
For unbalanced forces, there is acceleration that is go say there is going to be movement. Therefore, net force is equal to unbalanced forces.
(i) Suitcase dropped from a height.
Answer: since there is movement that is acceleration, then the force here is unbalanced force. The resultant force is downwards.towards the greater force direction.
(ii) A bicycle moving with constant velocity on a straight road.
Answer: As the bicycle moves at constant velocity on the straight road the force here is Balanced. Frictional forces balances the forces from the cyclist.
(iii) The rope does not move in a tug of war on applying force at both ends.
Answer: Balanced force.
A car is traveling with velocity of 40 m/s and has a mass of 1120 kg. The car has __________ energy.
A. Kinetic
B. Potential
Answer:
A.
Explanation:
The car has kinetic energy.
Q3: Fingers and hands pulling, pushing, pressing, or lifting are all examples of applying a
Is it friction gravity motion or force
Answer:
force
Explanation:
because the force
How do the alveoli in the lungs move oxygen and nutrients into the bloodstream? 1.Gravity 4.Time 2.Diffusion 5.Pressure 3.Magnetic force
Answer:
2.Diffusion
Explanation:
As we metabolize certain nutrients for the correct functioning of our cells, carbon dioxide is produced as a result. We need oxygen in order to metabolize them, so we need to have a system to incorporate it, and to eliminate the carbon dioxide produced.
This system is provided by the interaction between the respiratory system, which allows the enter of oxygen into the body and gets rid of the carbon dioxide, and the circulatory system, which acts transporting carbon dioxide and oxygen to and from the lungs, respectively.
The surface available for the gaseous exchange is enlarged by the pulmonary alveoli. The alveoli are the terminal aerial spaces of the respiratory system and the structures where the exchange between the air and blood is produced. Each alveolus is surrounded by a net of capillaries, where oxygen is freed from the hemoglobin and moves into the cells by diffusion. Carbon dioxide, diffuses out of the cells into the capillaries, where most of it dissolves in the plasma of the blood.
Susana heats up a sample of red crystals. While the sample is being heated,a gas is released and a blue powder is left after heating. Is the sample of red crystals an element or compound?
Answer & Explanation:
Susana's red crystal sample is a compound because it was broken down into a gas and blue powder. It is not an element because elements cannot be broken down into simpler substances by ordinary means, such as heating.
Answer:
Susana's red crystal sample is a compound because it was broken down into a gas and blue powder. It is not an element because elements cannot be broken down into simpler substances by ordinary means, such as heating.
Explanation
Sample response form Edg
When you connect your evidence to your claim you are using your
1. brain
2.reasoning
3. test
Answer:
2. reasoning
Explanation:
PLS GIVE BRAINLIEST
GUYS I NEED THIS ASAP
A 20.0g sample of metal with a specific heat of 5 J/(g°C) raised it's initial temperature to 40.0 when 500J heat was added. What was the initial temperature of the metal?
The initial temperature of the metal = 35 °C
Further explanationHeat can be formulated :
Q = m . c . ΔT
Q = heat, J
c = specific heat, J/g C
ΔT = temperature, °C
m = 20 g
c = 5 J/(g°C)
Q = 500 J
T₁ = 40 C
the initial temperature :
[tex]\tt \Delta t(T_2-T_1)=\dfrac{Q}{m.c}\\\\40-T_1=\dfrac{500}{20.5}\\\\40-T_1=5\\\\T_1=35^oC[/tex]
Pls help will give Brainlist
If a sealed 3.0L container has a pressure of 1.0 atm at 20.0 C and is heated to a temperature of 450. K. What is the pressure inside of the container at this temperature?
The pressure : 1.536 atm
Further explanationSame container=same volume⇒the volume is constant
Gay Lussac's Law
When the volume is not changed, the gas pressure in the tube is proportional to its absolute temperature
[tex]\tt \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]
P₁=1 atm
T₁=20+273=293 K
T₂=450 K
the pressure :
[tex]\tt P_2=\dfrac{P_1.T_2}{T_1}\\\\P_2=\dfrac{1\times 450}{293}=\boxed{\bold{1.536~atm}}[/tex]