When comparing plant and animal cells which statement is least accurate?
Plant cells have a cell wall and animal cells do not.
Plant cells have chloroplasts and animal cells do not.
Plant cells have a large central vacuole and animal cells do not.
Plant cells have cell membranes and animal cells do not.

Answer:

The magnesium ion is much smaller than the magnesium atom because magnesium atom contains more electrons as compared to magnesium ion. Explanation: ... Whereas when an atom tends to lose an electron then it acquires a positive charge and size of the atom tends to increase.

Answer:

Because it looses it two electrons to form a stable octet Ionic form..........

Answer:

HI(aq) + KOH(aq) --> KI(aq) + H2O(l)

Explanation:

HI is an acid and KOH is a base, this means that the reaction would be a neutralization reaction.

The equation is given as;

HI + KOH --> KI + H2O

Adding the physical states we have;

HI(aq) + KOH(aq) --> KI(aq) + H2O(l)

Graphite is sometimes used to reduce the friction between two surfaces that are rubbing together. Therefore, this happen because of weak covalent bond.

Graphite is among the most prevalent carbon allotropes. It is also the stable allotrope for carbon, and as such, it is employed in electrochemistry to define the heat of synthesis of carbon compounds. With a hardness of 2.09-2.23 g/cm3, graphite is an excellent conductor of electricity and heat.

Graphite is a large covalent structure in which each carbon atom is covalently linked to three other carbon atoms. Graphite is sometimes used to reduce the friction between two surfaces that are rubbing together. This happen because of weak covalent bond.

Therefore, graphite is sometimes used to reduce the friction between two surfaces that are rubbing together. This happen because of weak covalent bond.

To know more about graphite, here:

https://brainly.com/question/28690064

#SPJ2

Answer:

Ionic

Explanation:

Because sulphur is a non-metal and cesium is part of the group 1 Alkali Metals, this creates an ionic bond

Ionic bonds are created from one metal and one non-metal element.

This still is declared as Ionic despite the balance of this is Cs2S

Answer:

Physical Change. Physical changes are changes in which no bonds are broken or formed. This means that the same types of compounds or elements that were there at the beginning of the change are there at the end of the change.

Answer:

Adenine pairs with thymine and guanine pairs with cytosine

umm explanation pls so i answee

Answer:

It’s b;)

Explanation:

Answer:

B is correct

Explanation:

Answer:

A. 2 Fe, 3 S and 12 O

B. 43 moles of H

C. 1.0×10² moles of C

Explanation:

A. Formula for iron (III) sulfate is Fe₂(SO₄)₃

This salt has 2 atoms of iron and 3 sulfates, so in total we have:

2 Fe, 3 S and 12 O

Pay attention to the subscripts

B. Formula for quinine is: C₂₀H₂₄N₂O₂

If we continue with the example before we can say that 1 mol of Iron (III) sulfate contains 2 moles of Fe, 3 moles of S and 12 moles of O

Then, 1 mol of quinine contains 24 moles of H

So 1.8 moles of quinine, may contain (1.8 . 24) /1 = 43 moles of H

C.  1 mol of quinine contains 20 moles of C

5.4 moles of quinine may contain (5.4 . 20) /1 = 1.0×10²

(As the answer must be in 2 significant figures and the real answer is 108, I had to use scientific notation)

Answer:

19.6 moles of aluminum sulfate

Explanation:

Given parameters:

Number of sulfur atoms  = 3.54 x 10²⁵  atoms

Unknown:

Number of moles of aluminum sulfate = ?

Solution:

Aluminum sulfate is expressed as;

        Al₂(SO₄)₃

  1 mole of Aluminum sulfate contains 3 moles of sulfur.

 6.02 x 10²³ atoms are found in 1 mole of any substance;

 3.54 x 10²⁵  sulfur atoms will be found in [tex]\frac{3.54 x 10^{25} }{6.02 x 10^{23} }[/tex]   =  58.8moles of sulfur

1 mole of Aluminum sulfate contains 3 moles of sulfur.

 or ;

      3 moles of sulfur is contained in 1 mole of aluminum sulfate

     58.8moles of sulfur will contain [tex]\frac{58.8}{3}[/tex] moles of aluminum sulfate

                                                       = 19.6 moles of aluminum sulfate

Answer:

The answer is 95 degree celcius

The concentrations : 0.15 M

pH=11.21

The ionization of ammonia in water :

NH₃+H₂O⇒NH₄OH

NH₃+H₂O⇒NH₄⁺ + OH⁻

The concentrations of all species present in the solution = 0.15 M

Kb=1.8 x 10⁻⁵

M=0.15

[tex]\tt [OH^-]=\sqrt{Kb.M}\\\\(OH^-]=\sqrt{1.8\times 10^{-5}\times 0.15}\\\\(OH^-]=\sqrt{2.7\times 10^{-6}}=1.64\times 10^{-3}[/tex]

[tex]\tt pOH=-log[OH^-]\\\\pOH=3-log~1.64=2.79\\\\pH=14-2.79=11.21[/tex]

Explanation:

I DONT UNDERSTAND WHAT U WANT TO SAY

Answer:

here are what i have so far, im doing this right now

Explanation:

Plate Tectonics Lab Report

Instructions: In the Plate Tectonic lab you will investigate the interactions between continental and oceanic plates at convergent, divergent, and transform boundaries around the globe. Record your observations in the lab report below. Y

Objective(s):  

To look at interactions between continental and oceanic plates, etc.  

Hypothesis:

In this section, please include the if/then statements you developed during your lab activity for each location on the map. These statements reflect your predicted outcomes for the experiment.

Location One: Select three events that you predict will be observed. If I explore two continental plates at a convergent boundary, then I will observe:

• earthquakes  

• mountains

• volcanoes

Location Two: Select three events that you predict will be observed. If explore two continental plates at a divergent boundary, then I will observe:  

• ocean formation  

• volcanoes

• seafloor spreading

you will submit your completed report

ps; you might want to change up the objective.

A geological event is a brief, spatially diverse, dynamic and ongoing occurrence in the history of the Earth.

A geological event is a brief, spatially diverse, dynamic (diachronous), and ongoing occurrence in the history of the Earth that aids in the modification of the Earth system and the production of geological strata. The concept of event stratigraphy initially came up as a way to identify, analyse, and correlate how significant physical and biological events have affected the overall stratigraphical record.

Israel's Dead Sea basin Holocene sediments contain seismic activity. This can be considered a record of a geological event, an earthquake, that altered the strata. Geological events can occur over timescales of order of magnitude, from just a few seconds through millions of years, as well as on a variety of spatial scales, from the local to the globe.

1. Volcanoes and minor earthquakes

2. Volcanoes, earthquakes and fold mountains.

3. Earthquakes and fold mountains.

4. Magma from volcanoes is filled with nutrients that makes land fertile.

Therefore, a geological event is a brief, spatially diverse, dynamic and ongoing occurrence in the history of the Earth.

To know more about geological event, here:

https://brainly.com/question/2372671

#SPJ3

Answer:

Fair test.

PLS GIVE BRAINLIEST

Answer:

Mantle convection

Explanation:

The source of the force that moves tectonic plates along plate boundaries is as a result of the mantle convection.

Answer:

Explanation:

no of moles of C2H6=10/30=0.33

complete combustion of 2 moles of ethane produce 4 moles of CO2 therefore 0.33 moles of C2H6 produced 0.66 moles of CO2

now moles =given mass/molar mass

mass= moles*molar mass

mass of CO2=0.67*44=29.48 g

Answer:

Increases

Explanation:

The gravitational potential energy of an object increases as you bring it higher with respect to the ground.

Gravitational potential energy depends on the mass, height and gravity between two bodies;

   Gravitational potential energy  = mgh

m is the mass

g is the height

h is the height

Answer:

True

Explanation:

I used my notes from class today. I could be wrong.

Answer:

79.63

Explanation:

Hydrogen can only form single covalent bonds when forming molecular compounds. Therefore, option B is correct.

A covalent bond is a type of chemical bond formed between two or more atoms in which electrons are shared between them. Covalent bonds usually occur between nonmetal atoms and are formed by the sharing of valence electrons.

Hydrogen can only form a single covalent bond because it has only one valence electron and needs one more electron to complete its valence shell, making it stable.

Nitrogen can form triple covalent bonds, carbon can form multiple covalent bonds, and oxygen can form double covalent bonds in molecular compounds.

Thus, option B is correct.

To learn more about the covalent bond, follow the link:

https://brainly.com/question/10777799

#SPJ3

Answer:

d. It's ability to lose electrons

Answer:

The advantages of using an indicator to inform pH measurements:

It gives a mathematically result of the pH, in addition, it gives the precise pH of solvent, and it also gives an idea of the straight of the solution also.

Now, the advantage of using a pH meter:

It is a rapid method to characterize between acids, bases. However, this method does not show how strong acid or base actually are, plus it tends to gives a range of acidity or basicity not quite accurate as a result.

Answer:

no one additions exceed the capacity of the buffer

Explanation:

given

Volume buffer = 500.0 mL = 0.5 L

mol HNO₂ = 0.5 L × 0.100 mol/L = 0.05 mol HNO₂

mol NO₂⁻ = 0.5 L × 0.150 mol/L = 0.075 mol NO₂⁻

solution

we know when any base more than 0.05 (HNO2) than exceed buffer capacity

and when any base more than 0.075 (KNO2) than exceed buffer capacity

when we add 250 mg NaOH (0.250 g)

than molar mass NaOH =40 g/mol

and mol NaOH = 0.250 g ÷ 40g/mol

mol NaOH  = 0.00625 mol

0.00625 mol NaOH will be neutralized by 0.00625 mol HNO₂

so it would not exceed the capacity of the buffer.

and

when we add 350 mg KOH (0.350 g)

than molar mass KOH =56.10 g

and mol KOH = 0.350 g ÷ 56.10 g/mol

mol KOH = 0.0062 mol

here also capacity of the buffer will not be exceeded

and

now we  add 1.25 g HBr

than molar mass HBr = 80.91 g/mol

and mol HBr = 1.25 g  ÷ 80.91 g/mol

mol HBr = 0.015 mol

0.015 mol Hbr will neutralize 0.015 mol NO₂⁻  

so the capacity will not be exceeded.

and

we add 1.35 g HI  

molar mass HI = 127.91 g/mol

so mol HI = 1.35 g ÷ 127.91 g/mol

mol HI = 0.011 mol

capacity of the buffer will not be exceed

Answer:

cheese and bread

Explanation:

2 bread 1 cheese = cheese sandwich

Answer:

B

Explanation:

a mole is "a chemist's dozen" lol

Answer:

Graham's law states that the rate of diffusion or of effusion of a gas is inversely proportional to the square root of its molecular weight

Explanation:

Taking into account the reaction stoichiometry and the definition of molarity, 175 mL of 2 M H₂SO₄ will react with 28.0 g of NaOH.

In first place, the balanced reaction is:

H₂SO₄ + 2 NaOH  → Na₂SO₄ + 2 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

Molar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:

[tex]Molarity= \frac{number of moles}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

The following rule of three can be applied: If by reaction stoichiometry 80 grams of NaOH react with 1 mole of H₂SO₄, 28 grams of NaOH react with how many moles of H₂SO₄?

[tex]moles of H_{2}S O_{4} =\frac{28 grams of NaOHx1 mole ofH_{2}S O_{4} }{80 grams of NaOH}[/tex]

moles of H₂SO₄= 0.35 moles

In this case, you know:

Replacing in the definition of molarity:

[tex]2 \frac{moles}{liter}= \frac{0.35 moles}{volume}[/tex]

Solving:

2 [tex]\frac{moles}{liter}[/tex] × volume= 0.35 moles

volume= 0.35 moles ÷ 2 [tex]\frac{moles}{liter}[/tex]

volume= 0.175 liters= 175 mL (being 1 L= 1000 mL)

Finally, 175 mL of 2 M H₂SO₄ will react with 28.0 g of NaOH.

Learn more about

the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

molarity:

brainly.com/question/9324116

brainly.com/question/10608366

brainly.com/question/7429224

#SPJ1