When a toy car is moving across a flat surface, what forces are acting on it (gravity, tension, spring, friction,air,normal,applied)?

Answer:

a. The student's mistake was that the student did not swing the pendulum and start the watch at the same time.

b. 1.2 s per swing.

c. The likely effect of her reaction time is that they will should subtract two seconds off the time.

Explanation:

The pupil made the error of not simultaneously starting the watch and swinging the pendulum.

Pendulum is defined as a body that is suspended from a fixed point and moves back and forth while being pulled by gravity. The pendulum is used to gauge the gravitational pull because the force of gravity causes it to swing back toward its average position. A pendulum's time period can be used to tell the time because it is constant.

The swing of the pendulum is 1.2 sec. per swing. They should take two seconds off the timing due to her presumably slow reaction time. A pendulum's total time should be divided by the quantity of oscillations in order to determine its time period. When compared to a pendulum with a shorter string, the one back and forth cycle of a longer-stringed pendulum requires more time to complete.

Thus, the pupil made the error of not simultaneously starting the watch and swinging the pendulum.

To learn more about pupil, refer to the link below:

https://brainly.com/question/27874242

#SPJ2

Answer:

So waves are everywhere. But what makes a wave a wave? What characteristics, properties, or behaviors are shared by the phenomena that we typically characterize as being a wave? How can waves be described in a manner that allows us to understand their basic nature and qualities?

A wave can be described as a disturbance that travels through a medium from one location to another location. Consider a slinky wave as an example of a wave. When the slinky is stretched from end to end and is held at rest, it assumes a natural position known as the equilibrium or rest position. The coils of the slinky naturally assume this position, spaced equally far apart. To introduce a wave into the slinky, the first particle is displaced or moved from its equilibrium or rest position. The particle might be moved upwards or downwards, forwards or backwards; but once moved, it is returned to its original equilibrium or rest position. The act of moving the first coil of the slinky in a given direction and then returning it to its equilibrium position creates a disturbance in the slinky. We can then observe this disturbance moving through the slinky from one end to the other. If the first coil of the slinky is given a single back-and-forth vibration, then we call the observed motion of the disturbance through the slinky a slinky pulse. A pulse is a single disturbance moving through a medium from one location to another location. However, if the first coil of the slinky is continuously and periodically vibrated in a back-and-forth manner, we would observe a repeating disturbance moving within the slinky that endures over some prolonged period of time. The repeating and periodic disturbance that moves through a medium from one location to another is referred to as a wave.

Hope That Helps!!

Explanation:

Explanation:

Inertia is the tendency of a body to remain at rest or to do nothing.

It is the resistance to any change in position of body.

 When the force on a body increases, the inertia reduces

 When the mass is reduced the inertia reduces

According to newton's first law or the law of inertia "an object will remain in its state of rest or of uniform motion unless if it is acted upon by an external force".

Answer: a piece of iron near a magnet

Explanation:

Answer: C. Light energy.

Explanation:

Answer:  10 m/s

We're told the speed is constant, so it's not changing throughout the time period given to us. So throughout the entire interval, the speed is 10 m/s.

Answer:

Force of kinetic friction, Fk = 6N

Explanation:

Given the following data;

Coefficient of kinetic friction, μ = 0.2

Normal force, Fn=30N

To find the Force of kinetic friction;

Mathematically, the force of kinetic friction is given by the formula;

Fk = μFn

Where;

Substituting into the equation, we have;

Fk = 0.2*30

Fk = 6N

Therefore, the force of kinetic friction is 6N.

A force that is present between two moving objects or surfaces is called kinetic friction. It is estimated in newtons (N) and is calculated by:

[tex]\rm F_{k} =\rm \mu _{\rm k} F_{n}[/tex]

Where, [tex]\rm F_{k}[/tex] = frictional force,  [tex]\mu _{\rm k}[/tex]  = coefficient, [tex]\rm F_{n}[/tex] = normal force.

The kinetic friction of the object is 6N.

The kinetic friction can be estimated as:

Given,

Substituting values in the formula:

[tex]\rm F_{k} =\rm \mu _{\rm k} F_{n}[/tex]

[tex]\begin{aligned}\rm F_{k} &= 0.2 \times 30\\\\\rm F_{k} &= 6 \rm N\end{aligned}[/tex]

Therefore, 6N is the frictional force.

To learn more about frictional force follow the link:

https://brainly.com/question/1714663

Answer:

the answer is c. hope this help you out

Answer:

-47.04

Explanation:

Divide 12 m by 2.5 m/s which equals 4.8s

And then use 4.8s to multiply it with -9.8

4.8(-9.8)= -47.04 m/s

Hope this helped!! :)

The initial height of the pumpkin is 23.52m and the final vertical velocity of the pumpkin is 47.04 m/s.

Initial horizontal speed, u = 2.5 m/s

horizontal distance covered , d = 12m

So the time taken is:

t = d/u

t = 12/2.5 s

t = 4.8s

Now, the initial vertical speed, v = 0

So the vertical distance traveled by the pumpkin will be equal to the initial height of the pumpkin:

s = vt + ¹/₂gt²

s = 0.5 × 9.8 × 4.8 m

s = 23.52m

Final vertical velocity:

v' = v + gt

v' = 9.8 × 4.8 m/s

v' = 47.04 m/s

Learn more about laws of motion:

https://brainly.com/question/26083484?referrer=searchResults

Answer:

Rt = 908.25 [ohm]

Explanation:

In order to solve this problem, we must remember that the resistors connected in series are added up arithmetically.

In this case, R2 and R3 are in series therefore.

R₂₃ = 200 + 470

R₂₃ = 670 [ohm]

Now this new resistor (R₂₃) is connected in parallel with the resistor R4. therefore we must use the following arithmetic expression, to add resistances in parallel.

[tex]\frac{1}{R_{4-23} }= \frac{1}{R_{4}}+\frac{1}{R_{23} } \\\frac{1}{R_{4-23} }=\frac{1}{1800}+\frac{1}{670} \\R_{4-23}=488.25[ohm][/tex]

In this way R₁, R₅ and R₄₋₂₃ are connected in series.

Rt = R₁ + R₅ + R₄₋₂₃

Rt = 150 + 270 + 488.25

Rt = 908.25 [ohm]

Answer:

True

Because mitochondria is the powerhouse of the cell.

Explanation:

Hope this helps you

Answer:

True

Explanation:

Answer:

Explanation:

Angle of refraction is the angle made by refracted ray with the normal at the point of incidence . In this figure , refracted ray has been shown by line having arrow-head . Normal has been shown by broken line .

We observe that in figure D , angle made by refracted ray with normal is greatest . So figure D is the answer.

The  image where the angle of refraction is the greatest is the image D

The angle of refraction is the angle that the refracted ray made with the x-axis.

The higher the angle between the refracted ray and the x-axis, the higher the angle of refraction and vice versa.

From the given diagram, we can see that the  image where the angle of refraction is the greatest is the image D

Learn more on angle of refraction here: https://brainly.com/question/15838784

My commute to school is a constant distance, but the time it takes to get there fluctuates owing to traffic.

If an object moves with respect to a reference frame, such as when a passenger travels to the back of an airliner or a professor moves to the right with respect to a whiteboard, the item's position changes.

This change in location is described as displacement.

My commute to school is a constant distance, but the time it takes to get there fluctuates owing to traffic,

The initial and the final position of the commute is the same, but the displacement varies with the route which affects my car's speed and where it is in line at stop lights.

Learn more about displacement here, refer to the link;

https://brainly.com/question/10919017

#SPJ2

Answer:

Eh = 21 [J]

Removed as heat.

Explanation:

This is a case of energy conservation, we have to take into account the energies that go in and out of the system. In this case, 135 [J] of energy are entered in the form of work of the compressor to the chamber where the refrigerant is compressed, now of these 135 [J] 114 [J] were used as internal energy, this internal energy is used to increase the pressure and temperature of the refrigerant.

In this way the rest of the energy of the 135 [J] was lost in the form of heat to determine this loss of energy, we simply perform the arithmetic subtraction.

Eh = 135 - 114 = 21 [J]

Eh = 21 [J]

Answer:

letterman is shooting the kids

We use insulators to avoid being electrocuted. electricians use rubber gloves to avoid shock. Cables are insolated with rubber so you can hold them without getting shocked even if it is plugged in.

Answer:

travels

Explanation:

hope this helps and have a blessed day

Answer:

The required velocity of runner is 4m/s.

Answer: B. The speed will decrease.

Explanation:

When you ride a roller coaster, the wheels rub/scrape the rails, creating heat as a result of friction. And friction will slow you down. So increasing the friction on a roller coaster would slow it down.

Answer:

B

Explanation:

Friction opposes motion therefore reducing motion

Answer:

12m/s2

Explanation:

:D (just a smiley, not answer d)

boiling point Gatoride

Explanation:

by finding the distance between two successful crest

Answer:

the wavelength can be measured as the distance from crest to crest  or from trough to trough , the wavelength of a wave can be measured as the distance from a point on a wave to the corresponding point on the next cycle of the wave.

Explanation:

Answer:

Explanation:

ok it's correct

Answer:

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 3000 × 2

We have the final answer as

Hope this helps you

Answer:

A................

Explanation:

Hope this helps you

A. increase it's current and increase it's voltage

Explanation:

Answer:

8000cm³/hr

Explanation:

Given parameters:

Volume of the liquid draining off per hour   = 8000cm³

Time taken to drain off  = 1hr

Unknown:

Flow rate  = ?

Solution:

Flow rate is the volume of fluid that passes per unit of time.

 Flow rate  = [tex]\frac{volume of fluid}{time taken}[/tex]  

 Flow rate  = [tex]\frac{8000cm^{3} }{1hr}[/tex]  

Flow rate  = 8000cm³/hr

Answer:

Long short

Explanation:

1

Dogs that are bigger are selected to be parents.

2

The parents are bred together, and their offspring will be different sizes.

3

The biggest offspring will be selected and bred together.

4

This cycle continues until the dogs have been selectively bred to be bigger than the current world record size.

5

Selective breeders need to ensure that they are not also selecting for disadvantageous traits, like genetic limb defects.

Ur gonna need this...

Brainliest plzzz..thanks..sorry Messy

Answer:

Geological and atmospheric changes happening over a long time scale can cause short extinctions.

Explanation:

Answer:

d = 120 [m]

Explanation:

In order to solve this problem, we must use the theorem of work and energy conservation. Where the energy in the final state (when the skater stops) is equal to the sum of the mechanical energy in the initial state plus the work done on the skater in the initial state.

The mechanical energy is equal to the sum of the potential energy plus the kinetic energy.  As the track is horizontal there is no unevenness, in this way, there is no potential energy.

E₁ + W₁₋₂ = E₂

where:

E₁  = mechanical energy in the initial state [J] (units of Joules)

W₁₋₂ = work done between the states 1 and 2 [J]

E₂  = mechanical energy in the final state = 0

E₁ = Ek = kinetic energy [J]

E₁ = 0.5*m*v²

where:

m = mass = 60 [kg]

v = initial velocity = 12 [m/s]

Now, the work done is given by the product of the friction force by the distance. In this case, the work is negative because the friction force is acting in opposite direction to the movement of the skater.

W₁₋₂ = -f*d

where:

f = friction force = 36 [N]

d = distance [m]

Now we have:

0.5*m*v² - (f*d) = 0

0.5*60*(12)² - (36*d) = 0

4320 = 36*d

d = 120 [m]