When a low-pressure gas of hydrogen atoms is placed in a tube and a large voltage is applied to the end of the tube, the atoms will emit electromagnetic radiation and visible light can be observed. If this light passes through a diffraction grating, the resulting spectrum appears as a pattern of four isolated, sharp parallel lines, called spectral lines. Each spectral line corresponds to one specific wavelength that is present in the light emitted by the source. Such a discrete spectrum is referred to as a line spectrum.
What is the wavelength of the line corresponding to n =4 in the Balmer series? Express your answer in nanometers to three significant figures. EVO AV Om ? X (n) = 4.86.10? By the early 19th century, it was found that discrete spectra were produced by every chemical element in its gaseous slale. Even though these spectra were found to share the common feature of appearing as a set of isolated lines, it was observed that each element produces its own unique pattern of lines. This indicated that the light emitted by each element contains a specific set of wavelengths that is characteristic of that element. Submit Previous Answers Request Answer X Incorrect; Try Again; 19 attempts remaining

Answers

Answer 1

Answer:a)   λ = 4.862 10⁻⁷ m,  b)  λ = 4.341 10⁻⁷ m

Explanation:

The spectrum of hydrogen can be described by the expression

         

in the case of the initial state n = 2 this series is the Balmer series

a) Find the wavelength for n = 4

       

let's calculate

          = 1,097 10⁷ ()

         \frac{1}{ \lambda} = 1.097 10⁷ 0.1875 = 0.2056 10⁷

          λ = 4.862 10⁻⁷ m

b) n = 5

           

    \frac{1}{ \lambda} = 1,097 10⁷ ()

    \frac{1}{ \lambda} = 1.097 10⁷ 0.21 = 0.23037 10⁷

     λ = 4.341 10⁻⁷ m


Related Questions

During take-off a 8kg model rocket is burning fuel causing its speed to increase
at a rate of 4m/s2 despite experiencing a 90N drag.

What’s is the strength of the thrust?
(Answer unit is in N)( and the answer isn’t 212)

Answers

The strength of the thrust is 122 newtons.

The motion of the rocket is described by the second Newton's law, whose model is shown below:

[tex]\Sigma F = F - D = m\cdot a[/tex] (1)

Where:

[tex]F[/tex] - Thrust, in newtons[tex]D[/tex] - Drag, in newtons[tex]m[/tex] - Mass of the rocket, in kilograms[tex]a[/tex] - Net acceleration of the rocket, in meters per square second

If we know that [tex]D = 90\,N[/tex], [tex]m = 8\,kg[/tex] and [tex]a = 4\,\frac{m}{s^{2}}[/tex], then the strength of the thrust is:

[tex]F = D + m\cdot a[/tex]

[tex]F = 90\,N + (8\,kg)\cdot \left(4\,\frac{m}{s^{2}} \right)[/tex]

[tex]F = 122\,N[/tex]

The strength of the thrust is 122 newtons.

To learn more on Newton's laws, we kindly invite to check this verified question: https://brainly.com/question/13678295

have a difinite shape and do not easily take the shape of their containers

Answers


Ok well that’s something to think about

explain the process of convergence and divergence ! HELPPP

Answers

Answer:

Divergence generally means two things are moving apart while convergence implies that two forces are moving together. ... Divergence indicates that two trends move further away from each other while convergence indicates how they move closer together.

Explanation:

12) A horizontal force of 200 N is applied to move a 55-kg cart (initially at rest) across a 10 m level surface. What is the final speed of the cart? [hint: use work – energy principle] [3 marks]

Answers

Hi there!

We can use the following:

W = ΔKE = F · d

Find the work done on the cart:

W = 200 · 10 = 2000 J

Now, this is equal to the change in kinetic energy of the object. Its initial kinetic energy is 0 J since it starts from rest, so:

2000J = KEf - KEi

KE is given as:

[tex]KE = \frac{1}{2}mv^2[/tex]

2000J = 1/2(55)v²

4000 = 55v²

√(4000/55) = 8.53 m/s

Define the term dimension

Answers

Answer:

Q1. A measurable extent of a particular kind, such as length, breadth, depth, or height.

Q2. A dimensional constant is a physical quantity that has dimensions and has a fixed value. Some of the examples of the dimensional constant are Planck's constant, gravitational constant, and so on.

Q3. Physical quantities which posses dimensions and have variable are called dimensional variables. Examples are length, velocity, and acceleration etc.

Q4. Dimensionless variables are the quantities which doesn't have any dimensions the the value is a variable. Eg: angle = arc/ radius. Dimensions = L/L. = 1. So angle does not have any dimensions and the value can vary.

Q5. Principle of Homogeneity states that dimensions of each of the terms of a dimensional equation on both sides should be the same. This principle is helpful because it helps us convert the units from one form to another.

Q6. Dimensional analysis has been around a long time, Newton called it the "Great principle of Similitude", but the modern form can be traced back to James Clerk Maxwell. It was Maxwell who distinguished mass [A/], length [£], and time [7"] as the independent dimensions from which others could be derived.

Q7. Mass, length, time, temperature, electric current, amount of light, and amount of matter.

Q8. Dimensional analysis is used to convert the value of a physical quantity from one system of units to another system of units. Dimensional analysis is used to represent the nature of physical quantity. The expressions of dimensions can be manipulated as algebraic quantities.

Hope that helps. x

Can someone please help me? Please answer the question in the screenshot. Thank you! I need this answered!

Answers

Answer:

Explanation:

Photosynthesis is needed to store energy for the growth of the plant. It is like a factory that uses sunlight energy to convert 6CO₂ and 6H₂O into C₆H₁₂O₆ and 6O₂

Cell respiration is the process of breaking down the glucose and converting it into the other needed components of life. It's the engine that's fueled by the sugar of photosynthesis.

2 difference between calorimetry and calorimeter ​

Answers

Calorimetry :

the process of measuring the amount of heat released or absorbed during a chemical reaction.

Calorimeter :

device for measuring the heat developed during a mechanical, electrical, or chemical reaction, and for calculating the heat capacity of materials.

If a 35 kg box collides with a stationary 120 kg box with a force of 90 N, what must be true of the magnitude of the reaction force?

Answers

Newton's third law allows to find the result for the value of the reaction force during the collision is:

The reaction force is F = 90 N and is applied to the lighter body.

Newton's third law stable that the forces appear in pairs or ea that when two bodies interact, the interaction forces appear in the two bodies simultaneously, in general they are called action and reaction forces.

These furas are of the same magnitude, but in the opposite direction, each one applied to one of the bodies.

They indicate that the most lighter body collides with the one with the greatest mass with a force of F = 90 N. If we call this the action, the larger body must react with a force of equal magnitude on the lighter body.

Consequently, the reaction force is F = 90 N directed towards the lighter body.

Learn more about Newton's third law here: https://brainly.com/question/9857272

yayy here you are f, r, e, e, p, o, i, n, t, s

Answers

Answer:

Albert Einstein Albert Einstein was a German-born theoretical physicist, widely acknowledged to be one of the greatest physicists of all time. Einstein is best known for developing the theory of relativity, but he also made important contributions to the development of the theory of quantum mechanics.

Explanation:

Thank you so much buddy !!

Help with a b and c.

Answers

Answer:

Explanation:

Edit to add part a

a)  Heating a gas causes the atoms to increase their kinetic energy. With only atmospheric pressure to contain it, the gas will decrease in density by pushing colder gas out of the way. The lid is then sealed to the jar and allowed to cool. The cooling gas, now constrained by the volume of the jar will be forced to lower its pressure to maintain equilibrium. The lower pressure inside the jar will allow the atmospheric pressure outside the jar to "click" the lid indicating a proper seal.

b Before opening there is a much lower pressure inside the jar than outside. The outside pressure keeps the lid constantly in the "clicked" position.

c After the jar is opened, the pressure on either side of the lid is equal and an unbalanced force applied to one side of the lid or the other can cause the lid to "click" or "unclick" depending on the initial position.

1) Answer: Typically when stuff food is sealed in jars, it is sealed while hot. When the jar cools, and the air above the stuff cools, the pressure of the air decreases. ... When the pressure is more than the bottle can hold, it will explode.


2) answer: The button is there to indicate that the jar has remained sealed. If it's down, the vacuum created during the processing has been maintained, and no air has leaked in. If it's up, and you didn't open it, there's no telling what could be growing in there. , food nerd extraordinaire.

3) answer: Those safety buttons are a raised area on the lid. These jars have been sealed under pressure, and when opened, the pressure is released, causing the raised area to raise or lift. This is the same as when foods are canned at home.

Hello! Hope this helps you pass, merry Christmas!

i just want an answer please

Answers

Answer: An answer on what? I’ll never ignore you!

Explanation:

Answer:

an answer on what?

Explanation: Im here to help!!

How much potential energy does an 8 kg flower pot hanging 5 m above the ground have

Answers

Answer:

Explanation:

Relative to ground level it has

PE = mgh = 8(10)(5) = 400 J

PE = mgh => 8x5x9.81 => PE = 392.4 N


When you put a pot of water on the stove, the stove transfers thermal energy to the water. As the water gains large
amounts of energy, how does it transfer this energy to its surrounding environment?

Answers

Answer:

It releases some of the energy into the atmosphere as hot steam.

Explanation:

A CD has a diameter of 12.0 cm. If the CD is rotating at a constant angular speed of 200 revolutions per minute, then the tangential velocity of a point on the circumference is:

Answers

Hi there!

Converting from angular velocity to tangential velocity can be done by:

v = ωr

v = tangential velocity (m/s)

ω = angular velocity (rad/sec)

r = radius (m)

Convert 12 cm to meters:

100 cm = 1 m

12 cm = 0.12 m

Now, convert rev/min to rad/sec:

[tex]{\frac{200rev}{min}} * \frac{1min}{60s} * \frac{2\pi rad}{1 rev} = 20.94 rad/sec[/tex]

v = 20.94 · 0.12 = 2.51 m/s

A 21 newton force keeps a 3 kg object in uniform circular motion. The speed of the object is 9 m/s. The magnitude of the centripetal acceleration is


3 m/s^2
7 m/s^2
27 m/s^2
30 m/s^2

Answers

Answer:

Explanation:

F = ma

a = F/m = 21/3 = 7 m/s²

How to fix this? I need to save both

Answers

Should be able to pull it off the same way you got it on

Answer:

Id say beat it with a hammer and light it on fire. Then if it doesn't work, sacrifice it.

Explanation:

13) A mass attached to the free end of a spring executes simple harmonic motion according to the equation y = (0.50 m) sin (18π t) where y is in meters and t is seconds. What is the period of vibration?

Answers

Hi there!

The period is given by:

[tex]T = \frac{2\pi}{w}[/tex]

T = Period (sec)

w = angular frequency (rad/sec)

According to the equation for SHM in terms of position:

y(t) = Asin(ωt + φ)

A = Amplitude (m)

ω = angular frequency (rad/sec)

t = time (sec)

φ = phase angle

In this instance, the angular frequency is given as 18π.

Plug this value into the equation for T:

[tex]T= \frac{2\pi}{18\pi} = \frac{1}{9} = \boxed{0.111 s}[/tex]

what type of stretching is beneficial for sports performance and involves momentum​

Answers

Answer:

Dynamic stretching

Explanation:

Dynamic stretching is a form of stretching beneficial in sports utilizing momentum from form.

The planar simple harmonic wave travels in the positive direction of x axis with wave velocity u=2m/s, and the vibration curve of the particle at the origin in cosinusoidal form is shown in the figure.
Try to find (1) the vibration function of the particle at the origin, (2) the wave function of the planar simple harmonic wave according to the origin.

Answers

The planar simple harmonic wave travels in the positive direction of x axis with wave velocity u=2m/s, and the vibration curve of the particle at the origin in cosinusoidal form is shown in the figure.

Try to find (1) the vibration function of the particle at the origin, (2) the wave function of the planar simple harmonic wave according to the origin.

Answer:

Figure 16.8 The pulse at time

t

=

0

is centered on

x

=

0

with amplitude A. The pulse moves as a pattern with a constant shape, with a constant maximum value A. The velocity is constant and the pulse moves a distance

Δ

x

=

v

Δ

t

in a time

Δ

t

.

The distance traveled is measured with any convenient point on the pulse. In this figure, the crest is used.

two factors affecting the magnitude of force of gravity betwwn 2 objects are A. mass and matter B. mass and distance C. weight and mass D. distance and weight

Answers

Answer:

B. MASS & MATTER

Explanation:

Newton's law also states that the strength of gravity between any two objects depends on two factors: the masses of the objects and the distance between them. Objects with greater mass have a stronger force of gravity between them.

What is the height of a building (in meters) if it takes a rock 8.2 seconds to drop from it's roof?

Answers

Answer:

d = 329.81m

Explanation:

V_f = V_0+a*t

V_f = Velocity final

V_0 = Velocity initial

a = acceleration

t = time

V_f = (0m/s)+(9.81m/s²)*(8.2s)

V_f = 80.442m/s

d = ((V_f-V_0)/2)*t

d = distance

d = ((80.442m/s-0m/s)/2)*(8.2s)

d = 329.81m

If a particle undergoes SHM with amplitude 0.17 mm , what is the total distance it travels in one period

Answers

Answer:

Particle travels 4 * amplitude in one period = .68 mm

An object accelerates from rest to 93 m/s over a distance of 49 m. What acceleration did it experience?

Answers

Answer:

Explanation:

acceleration=  change in velocity/time taken

acceleration=  93/49

=2.02

A 200-kg, 2.0-m-radius, merry-go-round in the shape of a flat, uniform, circular disk parallel to level ground is rotating at 1.2 cycles/second about an axis through its center of mass and perpendicular to the ground. A 50-kg boy jumps onto the edge of the merry-go round and lands at a fixed point. What is the angular velocity of the merry-go-round after the boy lands on it

Answers

Answer:

Explanation:

Conservation of angular momentum.

Disk            I = ½MR²

Point mass I = mR²  (boy)

Initial angular momentum

L₀ = Iω = ½MR²ω₀

Final angular momentum

L₁ = Iω = (½MR² + mR²)ω₁

as momentum is conserved, these are equal

(½MR² + mR²)ω₁ = ½MR²ω₀

                       ω₁ = ω₀(½MR²/ (½MR² + mR²))

                       ω₁ = ω₀(½M/ (½M + m))

                       ω₁ = 1.2(½(200)/ (½(200) + 50))

                       ω₁ = 1.2(⅔)

                      ω₁ = 0.8 cycles/second or 0.8(2π) = 1.6π rad/s

A 2-kg object moving at 10 m/s has a 4-N force applied to it. Can you predict how the force will affect the object? A) yes, it will slow it down at a rate of 2 m/s2. B) yes, it will speed it up at a rate of 2 m/s2. yes, it will speed it up at a rate of 4 m/s2. D) It cannot be determined without more information.​

Answers

Answer:

D) It cannot be determined without more information.​

Explanation:

Velocity is a vector meaning it has both magnitude and direction.

Force and acceleration are also vectors.

Without knowing the directions of each, we cannot know if the mass has a speed (scalar value) change.

We can know that the mass will have a velocity change at the rate of 2 m/s² in the direction of the applied force.

If that force is applied in the direction of initial velocity, the velocity (and speed) will increase in magnitude in the same direction.

If that force is applied opposite of the initial velocity, the  the velocity (and speed) will decrease in magnitude in the same direction. If the acceleration lasts long enough, velocity will eventually become zero and then become negative. At the same time, speed will become zero, and then increase again as speed is the absolute value of the magnitude of velocity.

If the force is applied at any other angle, both the velocity and the speed will change in both magnitude and direction.

A mars surface exploration vehicle drops a rock off a 1.00 I'm high vertical Cliff. The sound of the rock landing at the base of the cliff is recorded by instruments on the vehicle 27.1 seconds later. Calculate the acceleration due to gravity on Mars given that the speed of sound on Mars is 320 m/s

Answers

The acceleration due to gravity on Mars is 11.81 m/s².

The given parameters:

Height of the cliff, h = 1 mTime of motion of the sound wave, t = 27.1 sSpeed of sound in mass, v = 320 s

The equation of motion to determine the acceleration due to gravity on the moon is calculated as follows;

[tex]s = vt + \frac{1}{2} gt^2[/tex]

where;

s is the distance traveledt is the time of motion

Since the time measured is two way time, the new equation for the total distance traveled is calculated as;

[tex]v = \frac{2d}{t} \\\\2d = vt\\\\d = \frac{vt}{2} \\\\d = \frac{320 \times 27.1}{2} \\\\d = 4,336 \ m[/tex]

The acceleration due to gravity is calculated as follows;

[tex]s = vt + \frac{1}{2} gt^2\\\\4,336 = 0 \ + \ \frac{1}{2} \times g \times (27.1)^2\\\\4,336 = 367.21g\\\\g = \frac{4,336}{367.21} \\\\g = 11.8 1 \ m/s^2[/tex]

Thus, the acceleration due to gravity on Mars is 11.81 m/s².

Learn more about acceleration due to gravity here: https://brainly.com/question/88039

n a distant solar system, a planet of mass 5.0 x 1024 kg orbits a sun of mass 3.0 x 1030 kg at a constant distance of 2.0 x1011 m. How many earth days does it take for the planet ot execute one complete orbit about the sun

Answers

Answer:

F = M2 ω^2 R       centripetal force of sun on planet

ω = (F / (M2 R))^1/2 = 2 pi f = 2 pi / P        where P is the period

P = 2 pi (M2 * R / F)^1/2

F = G M1 M2 / R^2        gravitational force on planet

P = 2 pi {R^3 / (G M1)]^1/2

P = 6.28 [(2.0E11)^3 / (6.67E-11 * 3.0E30)]^1/2

P = 6.28 (8 / 20)^1/2 E7 = 3.9E7 sec

1 yr = 3600 * 24 * 365 = 3.15E7 sec

P = 3.9 / 3.2 = 1.2 years

The energy transfer diagram for a piece of equipment is shown. You are using a hand-cranked flashlight. One minute of cranking typically provides about 30 to 60 minutes of light.
Describe ALL of the energy transformations that are taking place in this process.
A) mechanical energy to heat energy Eliminate
B) electrical energy to light energy
C) mechanical energy to light energy
D) chemical energy to mechanical energy
E) mechanical energy to electrical energy

Answers

Answer:

n/a

Explanation:

No diagram found. I am willing to help

In a hand-cranked flashlight first, mechanical energy produced with the hand is converted into electrical energy then the electrical energy is converted into light energy, therefore the correct answers are the option B and option E.

What is mechanical energy?

The sum of all the energy in motion (total kinetic energy) and all the energy that is stored in the system (total potential energy) is known as mechanical energy.

The expression for total mechanical energy can be given as follows

ME= PE + KE

As given in the problem, the energy transfer diagram for a piece of equipment is shown. You are using a hand-cranked flashlight. One minute of cranking typically provides about 30 to 60 minutes of light.

The transformation that is taking place is the mechanical energy to electrical energy and then electrical energy to light energy.

Thus, the correct options are option are B and E.

Learn more about mechanical energy from here, refer to the link;

brainly.com/question/12319302

#SPJ2

An object following a straight-line path at constant speed

A.) has no forces acting on it.

B.) has a net force acting on it in the direction of motion.

C.) has zero acceleration.

D.) must be moving in a vacuum.

E.) none of the above

Answers

An object following a straight-line path at constant speed is option C.) has zero acceleration.

Are there any forces acting on a moving item traveling in a straight line at a constant speed?

There are no forces operating on a body if it is travelling straight ahead at a steady speed. There are no forces operating on a body if it is travelling straight ahead at a steady speed.

Note that the physics concept of acceleration measures how quickly an object's motion is changing. An object's speed or velocity is what largely defines its motion.

Therefore, An object is considered to be accelerating when its velocity changes over time and as such  since acceleration of the object is  said to be  zero, one can say that the net force acting on it is also zero.

Learn more about straight-line path from

https://brainly.com/question/23271529
#SPJ1

Which kind of chemical reaction is best
represented by the following equation?
BaCl2 + Na2S04 --> 2NaCl + BaSO4
A. Synthesis
B. Single displacement
C. Decomposition
D. Double displacement

Answers

Answer:

Synthesis

Explanation:

[tex] \color{lime}{ \sf better \: luck \: on \: your \: exam \: lol}[/tex]

Other Questions
Crater Lake in Oregon is shaped like a circle with a diameter of about 5.5 milesa. How far is it around the perimeter of Crater Lake b. What is the area of the surface of Crater Lake?Give a step by step explanation please What beyblades should I buy. It has to be a beyblade from DB. I have 4 choices so far. All in one set, Special Starter set, Ultimate Valkryie, and Greatest Raphael.pls answer this if you know about this. if you don't, pls don't answer. so basically, which 3 should I get out of the 4???? How do I do this? It's a modulus question. Solve for x. I need help understanding my math. HELP please its due in a hour You decided to test a potential malware application by sandboxing. However, you want to ensure that if the application is infected, it will not affect the host operating system. What should you do to ensure that the host OS is protected the sequence of stages an organisms go through from one generation to the next lace where an organism lives is called in Can someone help help me r recycling saves the rainforest true or false. write 2 equivalent expressions for each and find the total price the price of a belt is $30 the belt is makeup 60% trIangle ABC was reflated over y-axis. the coordinate of point A are(6,-4). what are the coordinate of A Which answer shows the correct solution for 6x + 19x - 4 = 5(5x + 4)?No solution Infinitely many One solution List 3 powers Congress has. Simplify:(2/d^2)^3Please help :) Shauna wants to use facts from a government website in her speech. Which element is she adding to her speech?A. background InformationB. narrativeC. evidenceD. commentaryE. theme responsible for the overall performance of an organization or one of itsmajor self-contained subunits or divisions.*General ManagerFunctional Manager Front-line Manager He was a library of information about baseball HELP PLEASE I REALLY NEED IT I love yall so literally heres 100 points