What is the resultant of 5N force pointing north and 7N force pointing south? Do not forget to include the direction.

Answer: 90 Km

Explanation:

15 Km/hr X 6/hr = 90Km

=====================================================

Explanation:

At 4 seconds, the distance is 8 meters. Note the point (4,8)

At 8 seconds, the distance is 10 meters. The point here is (8,10)

Find the slope of the line through (4,8) and (8,10)

m = (y2-y1)/(x2-x1)

m = (10-8)/(8-4)

m = 2/4

m = 1/2

m = 0.5

The average speed on this interval is 0.5 m/s

-----------------

Another way to look at it:

We've gone from 8 meters to 10 meters, so that's a change of y = 2 meters.

During this, the time has changed from 4 seconds to 8 seconds, which is a difference of x = 4 seconds.

The velocity is the rate of change of distance over time

velocity = (change in distance)/(change in time) = y/x = 2/4 = 0.5 m/s

Distance travelled will be = 63 m

These are the equations that describe the behavior of a physical system in terms of its motion as a function of time .

Given : u = 24 m/s

           v= 18 m/s

           t = 3sec

using equation of motion : v = u + at

                         18 = 24 + a*3

                         -6 = 3a

                          a = -2 m/s^2

using equation of motion : s =  u t + 1/2 a (t^2)

                           s = 24 * 3 + 1/2 * (-2)(9)

                          s = 63 m

Learn more about equation of motion:

https://brainly.com/question/16355111?referrer=searchResults

#SPJ2

Answer:

32 m/s

Explanation:

Answer:

The thread will experience a force on it .

Explanation:

When thread is tied to pen it will experience force. Because the pen is Abit heavy , there is a force that is applied to it which will cause it to elongate , after a while the thread will stretch, elongate and can later experience deformation. When it experience that, the thread can break after deformation and it has losses it elasticity.

Answer:

Plastics being consumed by fish and passing toxic compounds to the humans eat the fish.

Explanation:

I did that answer and got it right.

Answer:

Plastics being consumed by fish and passing toxic compounds to the humans that eat the fish.

Explanation:

Answer:

hi

Explanation:

Answer:

31.496 inches

Explanation:

Answer:

because the moon returns to the same place on the sky once every siderial period, but the sun is also moving on the sky.

Explanation:

Hope that helps!

Answer:

Because the moon returns to the same place on the sky once every siderial  period (27.3 days), but the sun is also moving on the sky.Cycle of lunar phases takes 29.5 days. This is called the SYNODIC PERIOD

Explanation:

Answer:

incorrect its 987 for exact

Answer:

[tex] s = 1,003 \: m[/tex]

Explanation:

[tex]s = \frac{1}{2} (u + v)t = \frac{1}{2} (12 + 47)34 \\ s = 1,003 \: m[/tex]

Answer:

the answer to you're question is d=9

Answer:

A. Filtration

Explanation:

Chromatography can not be used to seperate A(l) from the mixture. And you can not even perform the method since B(s) is present.

As for distillation, this process is used to seperate liquid from mixture of liquids. Filtration is effective in seperation of liquid and solid.

Answer:

Its a D.

Explanation:

Answer:

Jack is 14, DiMarco is 12, Sam is 7

Explanation:

Answer:

c. The magnitude of vertical velocity is at a maximum value.

Explanation:

I think this is correct I'm not entirely sure though

Answer:

Explanation: ns along perpendicular axes are independent and thus can be analyzed separately. This fact was discussed in Kinematics in Two Dimensions: An Introduction, where vertical and horizontal motions were seen to be independent. The key to analyzing two-dimensional projectile motion is to break it into two motions, one along the horizontal axis and the other along the vertical. (This choice of axes is the most sensible, because acceleration due to gravity is vertical—thus, there will be no acceleration along the horizontal axis when air resistance is negligible.) As is customary, we call the horizontal axis the x-axis and the vertical axis the y-axis. (Figure) illustrates the notation for displacement, where \mathbf{s} is defined to be the total displacement and \mathbf{x} and \mathbf{y} are its components along the horizontal and vertical axes, respectively. The magnitudes of these vectors are s, x, and y. (Note that in the last section we used the notation \mathbf{A} to represent a vector with components {\mathbf{A}}_{x} and {\mathbf{A}}_{y}. If we continued this format, we would call displacement \mathbf{s} with components {\mathbf{s}}_{x} and {\mathbf{s}}_{y}. However, to simplify the notation, we will simply represent the component vectors as \mathbf{x} and \mathbf{y}.)

Review of Kinematic Equations (constant a)

x={x}_{0}+\stackrel{-}{v}t

\stackrel{-}{v}=\frac{{v}_{0}+v}{2}

v={v}_{0}+\text{at}

x={x}_{0}+{v}_{0}t+\frac{1}{2}{\text{at}}^{2}

{v}^{2}={v}_{0}^{2}+2a\left(x-{x}_{0}\right)\text{.}

The total displacement \mathbf{s} of a soccer ball at a point along its path. The vector \mathbf{s} has components \mathbf{x} and \mathbf{y} along the horizontal and vertical axes. Its magnitude is s, and it makes an angle \theta with the horizontal.

A soccer player is kicking a soccer ball. The ball travels in a projectile motion and reaches a point whose vertical distance is y and horizontal distance is x. The displacement between the kicking point and the final point is s. The angle made by this displacement vector with x axis is theta.

Given these assumptions, the following steps are then used to analyze projectile motion:

Step 1.Resolve or break the motion into horizontal and vertical components along the x- and y-axes. These axes are perpendicular, so {A}_{x}=A\phantom{\rule{0.25em}{0ex}}\text{cos}\phantom{\rule{0.25em}{0ex}}\theta and {A}_{y}=A\phantom{\rule{0.25em}{0ex}}\text{sin}\phantom{\rule{0.25em}{0ex}}\theta are used. The magnitude of the components of displacement \mathbf{s} along these axes are x and \mathrm{y.} The magnitudes of the components of the velocity \mathbf{v} are {v}_{x}=v\phantom{\rule{0.25em}{0ex}}\text{cos}\phantom{\rule{0.25em}{0ex}}\theta and {v}_{y}=v\phantom{\rule{0.25em}{0ex}}\text{sin}\phantom{\rule{0.25em}{0ex}}\mathrm{\theta ,} where v is the magnitude of the velocity and \theta is its direction, as shown in (Figure). Initial values are denoted with a subscript 0, as usual.

Step 2.Treat the motion as two independent one-dimensional motions, one horizontal and the other vertical. The kinematic equations for horizontal and vertical motion take the following forms:

\text{Horizontal Motion}\left({a}_{x}=0\right)

x={x}_{0}+{v}_{x}t

{v}_{x}={v}_{0x}={v}_{x}=\text{velocity is a constant.}

\text{Vertical Motion}\left(\text{assuming positive is up}\phantom{\rule{0.25em}{0ex}}{a}_{y}=-g=-9.\text{80}{\text{m/s}}^{2}\right)

y={y}_{0}+\frac{1}{2}\left({v}_{0y}+{v}_{y}\right)t

{v}_{y}={v}_{0y}-\text{gt}

y={y}_{0}+{v}_{0y}t-\frac{1}{2}{\mathrm{gt}}^{2}

{v}_{y}^{2}={v}_{0y}^{2}-2g\left(y-{y}_{0}\right)\text{.}

Step 3. Solve for the unknowns in the two separate motions—one horizontal and one vertical. Note that the only common variable between the motions is time t. The problem solving procedures here are the same as for one-dimensional kinematics and are illustrated in the solved examples below.

Step 4.Recombine the two motions to find the total displacement\mathbf{\text{s}} and velocity \mathbf{\text{v}}. Because the x – and y -motions are perpendicular, we determine these vectors by using the techniques outlined in the Vector Addition and Subtraction: Analytical Methods and employing A=\sqrt{{A}_{x}^{2}+{A}_{y}^{2}} and \theta ={\text{tan}}^{-1}\left({A}_{y}/{A}_{x}\right) in the following form, where \theta is the direction of the displacement \mathbf{s} and {\theta }_{v} is the direction of the velocity \mathbf{v}:

Total displacement and velocity

s=\sqrt{{x}^{2}+{y}^{2}}

\theta ={\text{tan}}^{-1}\left(y/x\right)

v=\sqrt{{v}_{x}^{2}+{v}_{y}^{2}}

{\theta }_{v}={\text{tan}}^{-1}\left({v}_{y}/{v}_{x}\right)\text{.}

(a)

Answer:

using the pressure of stump

Answer: Using the pressure of a stump

Answer:

False

Explanation:

Answer:

The quantization of energy refers to the fact that at subatomic levels, energy is best thought of as occurring in discreet "packets" called photons. Like paper money, photons come in different denominations. ... Each photon contains a unique amount of discreet energy

Answer:

the answer is ms no soubtrack360 degree

Explanation:

as if we combine ms with the ful form of ns(no soundtrack) we get ms no soundtrack and a 360 which is 360 degree

Answer: D

Explanation:

The frequency of a wave that has a period of 5 seconds is 0.2 Hz. Thus, the correct option is D.

Frequency of a wave is the number of occurrences of a repeating event per unit of the time. Frequency is also occasionally referred to as the temporal frequency for clarity purpose, and it is distinct from that of angular frequency. Frequency is measured in SI units of hertz which is equal to one event per second of the time.

Frequency can be calculated as the number of waves that pass a fixed place in a given amount of time period. The frequency of a wave that has a period of 5 seconds is:

f = 1/T

where, f = frequency,

T = Time taken

f = 1/ 5

f = 0.2 hertz

Thus, the frequency of the wave is 0.2 hertz.

Therefore, the correct option is D.

Learn more about Frequency here:

https://brainly.com/question/5102661

#SPJ2

Answer:

1. A) Reducing the thickness of the conductor would result in increased resistance to the flow of electric current

2. D) Induced magnetism produces magnetism by placing a body within a magnetic field.

3.  C)  For an electric current to be produced, an electric potential between two bodies and a conducting path joining the bodies.

4. YOU REPEATED QUESTION 1&4.

5. C) 1/R= 1/r1 + 1/r2 + 1/r3

6. A) Silicon, commonly used in electronic devices, is classified as a semiconductor

7. B) Electrons from your hair jump to the balloon, causing it to become negatively charged on one side.

Explanation:

7. The balloon “steals” electrons from your hair, which causes one side of the balloon to become negatively charged. Since your hair lost electrons, it now has a partial positive charge. Opposite charges of static electric attract, causing them to stick together.

6. For a material to be considered a semiconductor, it must have a resistance to electric current that's too high to be considered a conductor but too low to be considered an insulator. Three common semiconductors used in electronic devices are silicon, germanium, and selenium.

5. If three components are arranged to form a parallel circuit, and the individual resistance of these components are r1, r2, and r3 respectively, the formula for finding the total resistance R is: 1/R= 1/r1 + 1/r2 + 1/r3.

4. YOU REPEATED QUESTIONS 1 & 4.

3. For an electric current to be produced, there must be an electric potential between two bodies and a conducting path joining the bodies. Two oppositely charged bodies won't produce a current unless there's a conduction path for the electrons to travel through.

2. Placing a piece of metal such as an iron bar into a magnetic field, thereby causing the bar to become magnetized, is known as induced magnetism. Typically, an object that has been magnetized in this manner will lose its magnetic properties quickly when removed from the magnetic field.

1.  The resistance to electric current increases as the cross-section of the conductor is reduced, as the conductor is lengthened, and as the conductor is heated. Replacing the conductor with a less-conductive material increases the resistance as well.

1 & 4. A) Reducing the thickness of the conductor would result in increased resistance to the flow of electric current.

2. D) Induced magnetism produces magnetism by placing a body within a magnetic field.

3. C)  The two things must exist for an electric current to be produced is an electric potential between two bodies and a conducting path joining the bodies.

5. C) The formula used to determine the total resistance of the circuit is 1/R= 1/r1 + 1/r2 + 1/r3

6. A) Silicon, commonly used in electronic devices, is classified as a semiconductor

7. B) Electrons from your hair jump to the balloon, causing it to become negatively charged on one side.

The stream of positive charges which flow from the positive terminal to the negative terminal of the battery attached in a circuit.

1 & 4. An electric potential between two bodies and a conducting path joining the bodies is required to produce current.  If all other things remain equal, changes to a closed circuit that would result in increased resistance to the flow of electric current is reducing the thickness of the conductor.

The correct option is A.

2. If an iron bar placed into a magnetic field, it become magnetized, also known as induced magnetism. The term refers to producing magnetism by placing a body within a magnetic field is induced magnetism.

The correct option is D.

3. The two things must exist for an electric current to be produced is an electric potential between two bodies and a conducting path joining the bodies.

The correct option is C.

5. If three components are arranged to form a parallel circuit, and the individual resistance of these components are r1, r2, and r3 respectively, the formula for finding the equivalent resistance R is: 1/R= 1/r1 + 1/r2 + 1/r3.

The correct option is C.

6. A semiconductor must have a resistance to electric current . Three common semiconductors used in electronic devices are silicon, germanium, and selenium.

The correct option is A.

7. The balloon transfers electrons from your hair, which causes one side to become negatively charged. Hair lost electrons, it has a partial positive charge. Opposite charges of static electric attract, causing it to stick together. So, hair stands on end when you rub it with a balloon because electrons from your hair jump to the balloon, causing it to become negatively charged on one side.

The correct option is B.

Learn more about electric current.

https://brainly.com/question/2264542

#SPJ5

Answer:

2. deer

Explanation:

The lion, spider, and snake eat meat or to an extent.

Deer don't eat meat

Answer:

deer :)

Explanation:

The rest are basically carnivores

Answer:

20 m

Explanation:

by the formula,

                         [tex]2aS = V_{f}^{2} - V_{i}^2[/tex]

                         2 x 10 x S = 20^2 - 0

                         20S = 400

                         [tex]S = \frac{400}{20}[/tex]

                          S = 20 m  

Answer:

baby

Explanation:

Answer:

The zygote eventually becomes a baby

Explanation:

Got it right on a unit test in edg 2020