What is the momentum of a 70 kg man who is running with a velocity of 2.5 m/s?

Answers

Answer 1

Answer:

175kg.m/s

Explanation:

Momentum= mv 70kg*2.5m/s


Related Questions

A friend is coming to Tim’s house to study after school. What directions would Tim give for reaching his house from the entrance of the school?
(I WILL GIVE BRAINLIEST)

Answers

Answer:

go up the street as you exit the house and make a right and keep going up for 3 blocks and you should see the school

Lina holownicza wytrzymuje działanie siły o wartości co najwyżej 1400 N (większa siła powoduje rozerwanie liny). Oblicz maksymalne przyspieszenie, jakie może osiągnąć samochód o masie 2000 kg holowany na takiej linie po poziomej jezdni, jeżeli wiadomo, że łączna wartość sił oporu ruchu tego samochodu w czasie holowania wynosi 400 N.

Answers

Odpowiedź:

0,5 m / s²

Wyjaśnienie:

Jeśli się uwzględni:

Masa samochodu (m) = 2000 kg

Wartość siły oporu podczas holowania = 400N

Lina o maksymalnej sile może wytrzymać = 1400N

Maksymalne przyspieszenie = siła / masa samochodu

Siła = maksymalna siła - siła oporu

Siła = 1400 N - 400 N = 1000 N.

Stąd maksymalne przyspieszenie;

1000 N / 2000 kg

= 0,5 m / s²

what are the effects of moon rotation and revolution​

Answers

Answer:

The effects of the Moon's rotation includes;

1) The Moon rotation and revolution gives the appearance of a perfectly still Moon to observers of the Moon from the Earth

2) The Moon has two sides, the near side that continuously faces the Earth and the "back" or far side, which is also known as the dark side of the Moon

The effect of the Moon's revolution

1) The tides in the ocean and water bodies, due to the gravitational forces from the Moon

2) The changes in the observed shape of the Moon due to the amount of Sunlight that is able to be reflected from the Moon as a result of the relative position of the Moon, the Earth and the Sun, at a given point in time

3) Lunar and Solar eclipse, when the Earth and the Moon blocks the light coming from the Sun respectively, due to their combined revolution

Explanation:

The duration of the Moon's orbit round the Earth = 27.322 days

The time it takes the Moon to rotate round its axis = 27 days

The Moon is the closest cosmic body to the Earth.

an object has an mass of 15 kg and is falling at a rate of 2.0 m/s what is the momentum?

Answers

Answer:

30 kg.m/s

Explanation:

The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question we have

momentum = 15 × 2

We have the final answer as

30 kg.m/s

Hope this helps you

Which electron dot diagram shows the bonding between 2 chlorine atoms?2 dots then C l with 2 dots above and 1 dot below then 2 dots then 2 dots then C l with 2 dots above and 1 dot below then 2 dots.2 dots then C l with 2 dots above and 2 dots below then 2 dots then C l with 2 dots above and 2 dot below then 2 dots.2 dots then C l with 2 dots above and 2 dots below then 1 dot then C l with 2 dots above and 2 dots below then 2 dots.2 dots then C l with 2 dots above and 1 dot below then 3 dots then 3 dots then C l with 2 dots above and 1 dot below then 2 dots.

Answers

Answer:

It is B

Explanation:

Answer: 2nd answer

Explanation: took exam

A wagon having a mass of 42 kg is accelerated across a level road at 1.50 m/s2. What net force acts on the wagon horizontally?​

Answers

Answer:

The net force acting on the wagon is 63 N

Explanation:

Net Force

According to the second Newton's law, the net force exerted by an external agent on an object of mass (m) is:

F = m.a

Where (a) is the acceleration of the object.

The wagon has a mass of m=42 Kg is accelerated at [tex]a=1.5\ m/s^2[/tex]. The net force is:

F = 42*1.5

F = 63 N

The net force acting on the wagon is 63 N

a metallic cube whose each side is 10 cm is subjected to a shearing force of 100 kg. The top force is displaced through 0.25 cm with respect to the bottom. calculate the shearing stress strain and modulus​

Answers

Answer:

9.8×104Nm−2,0.025,3.92×106Nm−2

Solution :

Here, L=10cm=10×10−2m

F=100kgf=100×9.8N

ΔL=0.25cm=0.25×10−2m,

Shearing stress =FL2=100×9.8(10×10−2) Sheraing strain =ΔLL=0.25×10−210×10−2 = 0.025 Shear Modulus of elasticity, G=Shearing stressShearing strain=9.8×1040.025

=3.92×106Nm−2

Explanation:

(Blank) is caused by plate motion.


It’s please help.

Answers

Answer:

heat

Explanation:

A hose on the ground projects a water current upwards at an angle 40 to the horizontal at velocity 20 m/s find height at which water hits a wall at 8 m away from the hose (consider that acceleration due to gravity =9.8 m/s2)

Answers

Answer:

The water hits the wall at a height of 5.38 m

Explanation:

Projectile Motion

It's the type of motion that experiences an object projected near the Earth's surface and moves along a curved path exclusively under the action of gravity.

The object describes a parabolic path given by the equation:

[tex]{\displaystyle y=\tan(\theta )\cdot x-{\frac {g}{2v_{0}^{2}\cos ^{2}\theta }}\cdot x^{2}}[/tex]

Where:

y   = vertical displacement

x   = horizontal displacement

θ   = Elevation angle

vo = Initial speed

The hose projects a water current upwards at an angle of θ=40° at a speed vo=20 m/s.

The height at which the water hits a wall located at x=8 m from the hose is:

[tex]{\displaystyle y=\tan40^\circ\cdot 8-{\frac {9.8}{2*20^{2}\cos ^{2}40^\circ }}\cdot 8^{2}}[/tex]

Calculating:

y = 5.38 m

The water hits the wall at a height of 5.38 m

The magnitude of vector vector A is 84.9 m and it points in the +y axis direction. The magnitude of vector vector B is 195.0 m and it points at an angle of 41.0° counterclockwise from +x axis. The magnitude of vector vector C is 126.2 m and it points in the +x axis direction.

Answers

Solution:

The magnitude of A vector is 84.9 m in the positive y-axis direction.

So the X component of A =0

     the Y component of A = 84.9 m

Now the magnitude of B vector is 195 m and it makes an angle of 41° in the direction from the positive x-axis direction.

So  the X component of B = B cos 41°

                                           = 195 x cos 41°

                                           = 195 x 0.75   = 146.25 m

   the Y component of B = B sin 41°

                                           = 195 x sin 41°

                                           = 195 x 0.65   = 126.75 m

Now it is given that vector C has a magnitude of 126.2 m and it makes a direction towards the positive x-axis.

So the X component of C =126.2 m

     the Y component of C = 0

Comparing all these, we get

1. B vector has the largest X component

2. B vector has the largest Y component

please answer asignment due today

Answers

Answer:

Give me some time okkkk

The circumference of the Earth is
approximately 40,075 kilometers.
How many significant figures are
there in the numerical value?

Answers

Answer:

5 sig figures

Explanation:

What travels by vibrating particles? Mechincal Waves or ElecrtoMagnetic Waves.

Answers

Answer:mechanical waves.

Explanation:

Mechanical waves require the particles of the medium to vibrate in order for energy to be transferred. For example, water waves, earthquake/seismic waves, sound waves, and the waves that travel down a rope or spring are also mechanical waves.

A car traveling with 500,000 J of kinetic energy is brought to a kinetic energy of
100,000 J in 12 seconds. What is the force acting on the car to accomplish this?

A:41,666.67
B:3x10^-5N
C:33,333.33N
D:8,333.33N

Answers

Answer:

33,333.33 N

Explanation:

Given that :

Initial kinetic energy = 500,000 J

Final kinetic energy = 100,000 J

Using the relation :

Force * time = change in momentum (Newton's law)

Force (F) * 0.12 = (500,000 - 100,000)

0.12F = 400,000 J

Force = (400,000 J) / 0.12s

Force = 33333.333

Force = 33,333.33 N

While delivering 125 kg blocks of ice to a local village, Kristoff and his family (and Sven too) come upon a cliff that is 5.7 m above them. To solve their problem, they build a catapult that will launch their blocks of ice with an initial velocity of 15 m/s and at an angle of 45 degrees above the ground.


Prove that the catapult will successfully launch the ice blocks up to the top of the cliff. Quantities you will need to solve for will be initial vertical velocity, horizontal velocity, the distance the catapult is from the cliff, and the amount of time it takes the ice to reach the cliff. Assume that they are experts and have arranged everything so that the ice blocks just barely reach the top of their parabolic path when they land at the top of the cliff and make a smooth landing. Draw a picture of the scene to help you visualize what is happening.


After landing on the flat land above, each block of ice travels 20 meters while slowing to a stop.

What is the rate of acceleration while the blocks slow to a stop?


How long do the blocks take to slow to a stop?


What is the amount of friction between the ice and the snowy ground?



How long do the blocks take to slow to a stop?


What is the amount of friction between the ice and the snowy ground?

Answers

Answer:

a. Since h = 5.74 m > 5.7 m, the height of the cliff, the block of ice will successfully launch to the top of the cliff.

b. -2.81 m/s²

c. 3.78 s

d. -351.25 N

Explanation:

a. After landing on the flat land above, each block of ice travels 20 meters while slowing to a stop.

For the block of ice to reach the top of the cliff, its maximum height, h should be greater than or equal to 5.7 m. That is, h ≥ 5.7 m.

The maximum height of a projection h, projected with an initial velocity v at an angle Ф is h = v²sin²Ф/2g where g = acceleration due to gravity = 9.8 m/s².

For the block of ice, v = 15 m/s and Ф = 45°. So,

h = v²sin²Ф/2g

= (15 m/s)²sin²45/(2 × 9.8 m/s²)

= 225 (m/s)²(1/√2)²/19.6 m/s²

= 225 (m/s)²(1/2)/19.6 m/s²

= 112.5 (m/s)²/19.6 m/s²

= 5.74 m

Since h = 5.74 m > 5.7 m, the height of the cliff, the block of ice will successfully launch to the top of the cliff.

The graph is in the attachment.

b. What is the rate of acceleration while the blocks slow to a stop?

Using v² = u² + 2as where u = initial horizontal velocity of block = 15m/scos45° = 10.61 m/s, v = final velocity of block = 0 m/s since it stops, a = acceleration and s = distance block moves = 20 m

So, a =  (v² - u²)/2s

substituting the variables into the equation, we have

a =  ((0 m/s)² - (10.61 m/s)²)/2(20 m)

= - 112.57 (m/s)²)/40 m

= -2.81 m/s²

c. How long do the blocks take to slow to a stop?

Using v = u + at where u = initial horizontal velocity of block = 10.61 m/s v = final velocity of block = 0 m/s since it stops, a = acceleration = -2.81 m/s² and t = time it takes block of ice to stop

So, making t subject of the formula,

t = (v - u)/a

substituting the values of the variables, we have

t = ( 0 m/s - 10.61 m/s)/-2.81 m/s²

= -10.61 m/s/-2.81 m/s²

= 3.78 s

d.  What is the amount of friction between the ice and the snowy ground?

The frictional force, f = net force on block of ice

f = ma where  m = mass of bock = 125 kg and a = acceleration of block = -2.81 m/s²

f = ma

= 125 kg(2.81 m/s²)

= -351.25 N

Can u anser 5,6 on the picture

Answers

Answer: Number 6 is Periods

Explanation:

a squirrel runs at a speed of 9.9 m/s with 25 J of kinetic energy

What is the squirrels mass

Answers

Answer:

yeet yeet yeet yeet

Explanation:

Kinetic energy (K.E):-

So, the Mass of the Squirrel is 0.51 Kg (or) 510 grams.

A squirrel runs at a speed of 9.9 m/s with 25 J of kinetic energy.

What is the squirrel’s mass?

Answer: 0.51 kg

Under what circumstances will the projectile have the greatest velocity when it hits the ground? Explain please

Answers

It will have it’s greatest velocity right before the projectile hits the ground. At the instant it makes contact it become zero and the displacement changes to an upward direction rather than down

A ball is thrown up into the air. Ignore air resistance. When it is rising and reaches half of its maximum height,the net force acting on it is

Answers

Answer:

The net and only force acting on the ball thrown up into the air at half of its maximum height is the weight  of the ball

Explanation:

When the ball is rising in the air, the force, F, acting on it is given by the product of the mass, m × acceleration, a

The acceleration of a body thrown in the air = Gravitational acceleration = g = Constant

Therefore;

The force acting on the body thrown in the air F = Constant = m × g (downwards)

The force acting on the ball thrown up into the air at half of its maximum height = The mass of the ball × The acceleration due to gravity = The weight  of the ball.

A golf ball is sitting on a tee. The ball is struck with a golf club and flies
through the air. How does the force on the club compare with the force on the
ball when momentum is transferred between the club and ball?

Answers

Answer:

c i kn now it is

Explanation:

Es muy común que cuando se viaja hacia un río o lago se juegue "ranita", el cual consiste en lanzar una piedra horizontalmente hacia adelante para que cuando ésta toque la superficie del agua haga varios "saltos" sobre el agua. Durante un juego de estos, un desocupado nota que una de las piedras que arroja se demora 0,4 s en tocar la superficie del agua y la toca a 2,5 m de la orilla del lago, desde donde fue lanzada. Encuentre: a) La altura de la que fue lanzada la piedra. b) La velocidad con la que fue lanzada.

Answers

Answer:

a) La piedra es lanzada desde una altura de 0,785 metros.

b) La piedra es lanzada con una velocidad inicial de 6,25 metros por segundo.

Explanation:

a) Dado que la piedra es lanzada horizontalmente, tenemos que la piedra experimenta un movimiento horizontal a velocidad constante y uno vertical uniformemente acelerado debido a la gravedad. La altura de la que fue lanzada la piedra se puede determinar mediante la siguiente ecuación cinemática:

[tex]y = y_{o}+v_{o,y}\cdot t +\frac{1}{2}\cdot g\cdot t^{2}[/tex] (1)

Donde:

[tex]y[/tex] - Altura final, medida en metros.

[tex]y_{o}[/tex] - Altura inicial, medida en metros.

[tex]v_{o,y}[/tex] - Componente vertical de la velocidad inicial, medida en metros por segundo.

[tex]t[/tex] - Tiempo, medido en segundos.

[tex]g[/tex] - Aceleración gravitacional, medida en metros por segundo cuadrado.

Si sabemos que [tex]y = 0\,m[/tex], [tex]v_{o,y} = 0\,\frac{m}{s}[/tex], [tex]t = 0,4\,s[/tex] y [tex]g = -9,807\,\frac{m}{s^{2}}[/tex], entonces la altura inicial de la piedra es:

[tex]y_{o} = y-v_{o,y}\cdot t -\frac{1}{2}\cdot g\cdot t^{2}[/tex]

[tex]y_{o} = 0\,m-\left(0\,\frac{m}{s} \right)\cdot (0,4\,s)-\frac{1}{2}\cdot \left(-9,807\,\frac{m}{s^{2}} \right) \cdot (0,4\,s)^{2}[/tex]

[tex]y_{o} = 0,785\,m[/tex]

La piedra es lanzada desde una altura de 0,785 metros.

b) Ahora, obtenemos el componente horizontal de la velocidad inicial a partir de la siguiente ecuación cinemática:

[tex]v_{o,x} = \frac{x-x_{o}}{t}[/tex] (2)

Donde:

[tex]x_{o}[/tex], [tex]x[/tex] - Posiciones horizontales iniciales y finales, medidas en metros.

[tex]t[/tex] - Tiempo, medido en segundos.

Si tenemos que [tex]x_{o} = 0\,m[/tex], [tex]x = 2,5\,m[/tex] y [tex]t = 0,4\,s[/tex], entonces el componente horizontal de la velocidad inicial es:

[tex]v_{o,x} = \frac{2,5\,m-0\,m}{0,4\,s}[/tex]

[tex]v_{o,x} = 6,25\,\frac{m}{s}[/tex]

La piedra es lanzada con una velocidad inicial de 6,25 metros por segundo.

A force of 30 N stretches a very light ideal spring 0.73 m from equilibrium. What is the force constant (spring constant) of the spring

Answers

The forces constant (spring constant) of the spring will be 41.09 N/m.

What is spring force?

The force required to extend or compress a spring by some distance scales linearly concerning that distance is known as the spring force. Its formula is;

F = kx

The given data in the problem is;

F is the spring force = 30 N

K is the spring constant= ?

x is the displacement of spring = 0.73 m

The spring constant is;

K =F/x

K=30/0.73

K=41.09 N/m

Hence the force constant (spring constant) of the spring will be 41.09 N/m.

To learn more about the spring force refer to the link;

https://brainly.com/question/4291098

#SPJ1

A man speeding at 40m/s decides to outrun the cops and starts to
accelerate at a rate of 2.5m/s2 for 12 seconds. What is the criminal's new
speed?

Answers

Answer:

70 m/s.

Explanation:

Given that,

Initial speed, u = 40 m/s

Acceleration = 2.5 m/s²

Time, t = 12 s

We need to find criminal's new  speed. Let it is v. Using equation of motion to find it as follows :

v = u +at

Substitute all the values

v = 40 + 2.5(12)

v = 70 m/s

So, the new speed is 70 m/s.

It takes a crane 59s to lift a flagstone using 342 W of power. How much work is done on the flagstone? ​

Answers

Answer: The work done on the flagstone is 20178 J

Explanation:

Power is the rate at which work is done . It is equal to the amount of work done divided by the time it takes to do the work.

[tex]Work=Power\times time[/tex]

Given : work = ?

Power = 342 W = 342J/s

Time = 59 s

[tex]Work=342J/s\times 59s=20178J[/tex]

Thus the work done on the flagstone is 20178 J

A(n) ____________ stretch is one done where antagonist muscles are used to stretch the muscles. But the _____________ stretch is one that is done that the muscle needs help from something or someone to stretch the muscle.

Answers

Answer: Dynamic - Static Flexibility

Explanation:

A 250-kg moose stands in the middle of the railroad tracks in Sweden, frozen by the lights of an oncoming 10,000kg train traveling at 20m/s. Even though the engineer attempted in vain to slow the train down in time to avoid hitting the moose, the moose rides down the remaining track sitting on the train’s cowcatcher. What is the final velocity of the train and moose after the collision?
(Momentum & Impulse)

Answers

Answer:

The final velocity of the train and the moose after collision is approximately 19.51 m/s

Explanation:

The given mass of the moose, m₁ = 250 kg

The velocity of the moose, v₁ = 0

The mass of the oncoming train, m₂ = 10,000 kg

The velocity of the train, v₂ = 20 m/s

The velocity of the moose and the train after collision = v₃

By the principle of conservation of linear momentum, the total initial momentum before the collision = The total final momentum after collision

m₁·v₁ + m₂·v₂ = (m₁ + m₂)·v₃

Therefore, by substitution, we have;

250×0 + 10,000× 20 = (10,000 + 250) × v₃

200,000 = 10,250 × v₃

v₃ = 200,000/10,250 ≈ 19.51 m/s

The final velocity of the train and the moose after collision = v₃ ≈ 19.51 m/s

When two ocean plates come together, one ocean plate __________________
under the other, causing a chain of ________________ __________________
to form.

Answers

Answer:

A subduction zone is also generated when two oceanic plates collide — the older plate is forced under the younger one — and it leads to the formation of chains of volcanic islands known as island arcs.

Explanation:

In raising an object vertically at a constant speed of 2 m / s 10 watts of power is developed the weight of the object is

Answers

Answer:

5N

Explanation:

Power = Workdone/Time

Since workdone = Force * distance = mgh

Power = mgh/t

Given

Power = 10watts

speed = 2m/s

Power = Weight * velocity

Substitute

10 = Weight * 2

Weight = 10/2

Weight = 5N

Hence the weight of the object is 5N

Jerry is pushing a 50-kg box across a moth floor with an acceleration of 0.6 m/s2. What force is he applying to the box? *

83.3 N
0.012 N
0
30 N

Answers

Answer:

30 N

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 50 × 0.6

We have the final answer as

30 N

Hope this helps you

I need help with science homework

Answers

Answer:

4. atmosphere and geosphere

5. atmosphere and hydrosphere

6. hydrosphere and geosphere (? not sure about this one sorry)

7. hydrosphere and geosphere

8. biosphere and geosphere

Other Questions
What is the equation of the line that passes through the point (8,-8) and has aslope of 12 I WILL MARK BRAINLIEST Rohit is writing an informative essay on the tree-farming industry. Which is the best research question for him to ask?A)How does the tree-farming industry benefit the United States?B)Which tree variety is most popular on tree farms in the United States?C)What is an interesting fact about tree farms in the United States?D)Do people know much about the tree-farming industry in the United States? What is the infinitive verb for biking in spanish well what do you call a sheep and a goat name mixed together i need help with this practice problem Help asp pls help pls Gwen was less than happy with her last visit to her favorite coffee shop. She held the manager responsible for the delayed services offered to customers. She attributed the cause to the fact that the management was not well prepared to cater to the sudden rush as they had very few employees present on that particular day. Which element of the attribution theory did Gwen associate with the cause for her perceived dissatisfaction Which of the following correctly describes the seeding method?A. Melting chocolate on the stove top using indirect heat.B. Cutting the chocolate into very small pieces before melting it.C. Using a microwave at 80% power to melt chocolate in a glass bowl.D. Adding a small amount of solid chocolate to a large quantity of melted chocolate. What is 56/5 simplest form??? which statement best describe the relationship between the products of photosynthesis and the reactants in cellars respiration Find the area of the triangle.7 yd24 ydThe area issquare yards. pls help asap! This homework is really hard In Introduction to Found Poetry, how does the author make the reader aware of the different types of found poetry?by listing what is good and bad about each typeby quoting famous examples of each typeby describing how each type is madeby explaining how each type differs from its original source What is the answer for this? find the area of each trapezoid 32 ft x 16 ft 18 ft which TWO regions of georgia could best characterized as "mountainous"1. appalachian plateau 2. valley & ridge 3.blue ridge 4.piedmont 5. coastal plain PLEASE HELP!!!THIS IS WORTH SO MANY POINTS!! Identify the "novel" opportunity that arose in the Victorian period that still persists today with wild popularity. 5. a) Determine the total surface area ofthis tent, including the floor, in order toestimate the amount of canvas neededto construct it.b) What is the volume of the tent?13m22 mm13.5 m3 mI4 m4 mUnit 6 ashton needs a total of $1.50 in quarters for a coin- operated car wash. He already has $0.75. which equation can be used to find q, the number of additional quarters ashton needs in order to have enough money for the car wash?