Answers
Answer:
5.5Ω
Explanation:
The circuit diagram shown is a parallel arrangement. To solve this problem for the equivalent resistance,
R1 = 10Ω
R2 = 20Ω
R3 = 30Ω
For circuits in parallel, equivalent resistance is ;
[tex]\frac{1}{Rt}[/tex] = [tex]\frac{1}{R1} + \frac{1}{R2} + \frac{1}{R3}[/tex]
Now insert the parameters and solve;
[tex]\frac{1}{Rt}[/tex] = [tex]\frac{1}{10} + \frac{1}{20} + \frac{1}{30}[/tex]
[tex]\frac{1}{Rt}[/tex] = [tex]\frac{6 + 3 + 2}{60}[/tex]
[tex]\frac{1}{Rt}[/tex] = [tex]\frac{11}{60}[/tex]
Rt = 5.5Ω
Related Questions
HELP MEEEEE HURRRYYYY EASYY
What best describes the greatest height a ball will bounce off the ground after being dropped from a height of 50 centimeters?
A. Less than 50 centimeters, as the ball transforms some of its thermal energy into sound energy
B. Less than 50 centimeters, as the ball transforms some of its potential energy into sound energy
C. Greater than 50 centimeters, as the ball transforms some of its thermal energy into potential energy
D. Greater than 50 centimeters, as the ball transforms some of its potential energy into thermal energ
Answers
Answer:
C
Explanation:
thats what i think it depends on the amount of force someone dropped the ball with.
Answer: A) "Less than 60 centimeters, as the ball transforms a part of its potential energy into heat energy"
Explanation:
I took the test
State the relation between the joule and kilocalories.
Answers
Explanation:
1 Kilocalories = 4,184 Joules
Answer:
The relationship between calorie and joule are proportionate. Which implies, the calorie is directly proportional to the joule. That means-
When the value in terms of calorie increases, its corresponding value in joules also increases at a rate of 4.2.
When the value in terms of calorie decreases, its corresponding value in joules also decreases at a rate of 4.2.
a calorie is the unit of energy.Calorie or kilocalorie is the unit of energy = 1000 calories.Joule is the unit of energyKilojoule is the unit of energy, = 1000 joules.A golf ball is hit horizontally off the edge of a 30 m high cliff and lands a distance of 25 m from the edge of the cliff. What was the initial vertical velocity of the golf ball?At what time did the golf ball hit the ground?What was the initial horizontal velocity of the golf ball? What was the final horizontal velocity of the golf ball?
Answers
Answer:
V₀y = 0 m/s
t = 2.47 s
V₀ₓ = 61.86 m/s
Vₓ = 61.86 m/s
Explanation:
Since, the ball is hit horizontally, there is no vertical component of velocity at initial point. So, the initial vertical velocity (V₀y) will beL
V₀y = 0 m/s
For the initial vertical velocity of golf ball we consider the vertical motion and apply 2nd equation of motion:
Y = V₀y*t + (0.5)gt²
where,
Y = Height = 30 m
g = 9.8 m/s²
t = time to hit the ground = ?
Therefore,
30 m = (0 m/s)(t) + (0.5)(9.8 m/s²)t²
t² = 30 m/4.9 m/s²
t = √6.122 s²
t = 2.47 s
For initial vertical velocity we analyze the horizontal motion of the ball. We neglect the frictional effects in horizontal motion thus the speed remains uniform. Hence,
V₀ₓ = Xt
where,
V₀ₓ = Initial vertical Velocity = ?
X = Horizontal Distance = 25 m
Therefore,
V₀ₓ = (25 m)(2.47 s)
V₀ₓ = 61.86 m/s
Due, to uniform motion in horizontal direction:
Final Vertical Velocity = Vₓ = V₀ₓ
Vₓ = 61.86 m/s
pls help i will give u brianliest!
Answers
Answer:
Explanation:
neautrons and protons
Question 10 (1 point)
When the student releases the water balloon, it swings forward. When the water balloon swings back, you can tell that the student expects the
water balloon to hit her face. Why does the water balloon not continue on and hit the student's face?
Answers
Answer:
It does not hit the students face because the speed of the balloon slows down as energy is lost through thermal.
Explanation:
The car's initial speed was 15 m / s and the distance the car travels before it comes to a complete stop after the driver applies the brakes is 63m. What is the magnitude of the car's acceleration?
Answers
Initial speed of the car (u) = 15 m/s
Final speed of the car (v) = 0 m/s (Car comes to a complete stop after driver applies the brake)
Distance travelled by the car before it comes to halt (s) = 63 m
By using equation of motion, we get:
[tex] \bf \longrightarrow {v}^{2} = {u}^{2} + 2as \\ \\ \rm \longrightarrow {0}^{2} = {15}^{2} + 2 \times a \times 63 \\ \\ \rm \longrightarrow 0 = 225 + 126a \\ \\ \rm \longrightarrow 126a = - 225 \\ \\ \rm \longrightarrow a = - \dfrac{225}{126} \\ \\ \rm \longrightarrow a = - 1.78 \: m {s}^{ - 2} [/tex]
[tex] \therefore [/tex] Acceleration of the car (a) = -1.78 m/s²
Magnitude of the car's acceleration (|a|) = 1.78 m/s²
Only visibly rough surfaces have friction between them
Answers
DESPERATE WILL GIVE BRAINLIST and thanks
Radiometric dating is a form of relative dating.
Question 4 options:
True
False
Answers
Answer: True
Explanation:
(i hope this helps sorry kinda late but i did not see any answers)but can i have brainlist
A bicycle travels 22 km in 0.50 hr. What is its average speed?
Answers
Answer:
22/0.50=44
Explanation:
average speed= distance / time
While spending the weekend in your cabin, you burn wood in your pot-bellied stove to heat a kettle of water for tea.
Answer the following questions for 2 points each:
1. What type of energy does the wood have in this situation. Explain your answer.
2. What type of energy is this transformed into as the wood it burned in the stove. Explain your answer.
3. What type of heat transfer is being used to warm the kettle of water? Why does the water eventually boil?
Answers
Answer: 1 = Heat
2=gas
3=it gets hot enough to boil because the metal conducts the heat into the water to heat it up and eventually boil.
Explanation: its common sense
PLEASE HELP MEEEEEE
Some physical evidence was obtained from a crime scene. For which of these pieces of evidence will forensic scientists conduct an identification test?
A.
a hair strand
B.
a black powder
C.
a glove
D.
bloodstains
Answers
Answer:
The correct option is D. bloodstains
The red car drive on a motor way in 800 m/s.The
driver of the Green car want to dive in that speed in
20 seconds.How many distance can he travel?
Answers
So the green car would be able to drive 40m
Rohith has been jogging to the bus stop for 2.0 minutes at 3.5 m/s when he looks at
his watch and sees that he has plenty of time before the bus arrives. Over the next
10.0s, he slows his pace to a leisurely 0.75 m/s. What was his average acceleration
during this 10.0 s?
Answers
a bird is traveling west with a velocity of 8 m/s and momentum of 40 mg*m/s what's the birds mass?
Answers
Answer:
m = 5 [mg]
Explanation:
We must remember that the definition of linear momemtum is defined as the product of mass by distance.
P = m*v
P = momentum = 40 [mg*m/s]
m = mass [mg]
v = velocity = 8 [m/s]
Now clearing m:
m = P/v
m = 40/8
m = 5 [mg]
A force of 30 Newtons is used to push a basket along the floor a total distance of 3 meters. How much work is done on the basket?
Answers
Answer:
the total work done is 90J
Explanation:
the reason why is because you are the force (30 newtons) and the metere (3) so you will be multiplying those two numbers together.
W= FD 30(3)= 90J
If a feather takes 2.5 seconds to drop 200cm, what is the speed of this feather
Answers
Answer:
80cm per second
Explanation:
what is the number of significant digits in the measurement 10.005m?
Answers
What refers to the bending of light as it passes from one medium into another?
10. Which of the following arrangements of visible light colors shows decreasing wavelength?
A. red, orange, yellow, green, blue, indigo, violet
B. red, yellow, green, orange, violet, blue, indigo
C. violet, blue, green, orange, red, indigo, yellow
D. violet, indigo, blue, green, orange, yellow, red
12. What refers to the splitting of white light into seven different colors?
A. dispersion
B. refractive index
C. reflection
D. refraction
13. Refractive Index is a ratio between the speed of light in vacuum and .
A. speed of light in vacuum
B. speed of sound in vacuum
C. speed of light in a medium
D. speed of sound in a medium
15. Based on the colors of light, what color comes between red and yellow?
Answers
Answer:
9.Refraction
13.refractive index is the ratio of velocity of light in a vacuum to it's velocity I. a specified medium.
12.dispersion
14.Orange with a wavelength of about 585-620
I have no idea of number 10
Which of the following games below involves different manipulative skills like throwing and rolling and some motor skills?
Group of answer choices
target games
invasion games
striking and fielding games
physical activity
Answers
Answer:
striking and fielding
Explanation:
striking and fielding
A construction crew must use a lever to lift a boulder. The mechanical advantage of the lever is 6 and the lever applies a force of 1600 N to the rock. What is the force that the construction crew must apply to the lever?
Answers
Answer:
The force the construction crew must apply to the lever is 266.67 N
Explanation:
Mechanical advantage is the measure of the ratio of output force to input force in a system. Hence, mechanical advantage (MA) is given by the formula
[tex]MA = \frac{F_{o} }{F_{i} }[/tex]
Where MA is the mechanical advantage
[tex]F_{o}[/tex] is the output force
and [tex]F_{i}[/tex] is the input force
From the question, the mechanical advantage of the lever is 6
That is, MA = 6
and the lever applies a force of 1600 N to the rock
That is, Output force, [tex]F_{o}[/tex] = 1600 N
To determine the force the construction crew must apply to the lever, that is the input force, [tex]F_{i}[/tex]
From
[tex]MA = \frac{F_{o} }{F_{i} }[/tex]
We can write that
[tex]F_{i} = \frac{F_{o} }{MA}[/tex]
Then,
[tex]F_{i} = \frac{1600N}{6}[/tex]
[tex]F_{i} = 266.67 N[/tex]
Hence, the force the construction crew must apply to the lever is 266.67 N.
The force that the construction crew must apply is 266.67 N.
A machine is a device in which the effort applied at one end is used to overcome a load at another end. The mechanical advantage is the ratio of load to effort of a machine.
We have the following information;
Mechanical advantage (MA) = 6
Load = 1600 N
Effort = ?
Substituting values;
6 = 1600N/Effort
Effort = 1600N/6
Effort = 266.67 N
Learn more: https://brainly.com/question/8592296
where is the centripetal force directed on a banked curve?
Answers
Answer:
The net force on a car traveling around a curve is the centripetal force, Fc = m v2 / r, directed toward the center of the curve.
Explanation:LET ME KNOW IF ITS WRONG. HAVE A NICE DAY!!!!!!!!!!
Answer: The net force on a car traveling around a curve is the centripetal force, Fc = m v2 / r, directed toward the center of the curve. The centripetal force is directed at right angles to the motion and also along the radius towards the centre of the circular path. In order for a car to move around a circular track, something must provide a centipetal force. One source of the centripetal force is friction between the tires and the road. This means that the tires do not need to supply any friction at all to keep the car from slipping sideways. ...
Hope this helps... stay safe and have a great day!!! :D
A machine has mechanical advantage 2,what does it mean?
Answers
Answer:
The mechanical advantage of a machine is 2. Mechanical advantage MA is the ratio of output (generated by the machine) force to input (applied to the machine) force. So MA = 2 means that for example if you apply 100 N then your machine will multiply that force and generate 200 N .
How much time is required for a 20 Coulombs charge to flow through a point if the current is 2 amperes? help plzzzzz
Answers
The time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
What is electric current?Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.
The given data in the problem is;
t is the time is required
q is the charge = 20 Coulombs
I is the current is= 2 amperes
The formulas for the elctric current are given as;
[tex]\rm I = \frac{q}{t} \\\\\ \rm t = \frac{q}{I} \\\\ \rm t = \frac{20}{2} \\\\ t=10 \ sec[/tex]
Hence the time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
To learn more about the electric current refer to the link;
https://brainly.com/question/2264542
The time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
What is electric current?Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.
The given data in the problem is;
t is the time is required
q is the charge = 20 Coulombs
I is the current is= 2 amperes
The formulas for the electric current are given as;
[tex]I=\dfrac{q}{t}[/tex]
[tex]t=\dfrac{q}{I}[/tex]
[tex]t=\dfrac{20}{2}[/tex]
[tex]t=10 sec[/tex]
Hence the time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
To learn more about the electric current refer to the link;
brainly.com/question/2264542
The weight of an object is determined by it X
. ?
Mass
Gravity
Height
Both A&B
Answers
Answer:
gb tbbyeyb
Explanation:
Why are recessive traits not seen even though they are present in the alleles?
Answers
Answer:
Explanation:. The vending machine holds 10 bags of pretzels and 8 packs of cheese crackers. Both the pretzels and crackers dispenseat 2 bags per hour. How many hours will elapse when there is the same number of snacks remaining in the vending machine? How many of each item will there be at this point?Equation1______________________________Equation2_______________________________Hours: ___________________________ Items: ____________________________What does each equation have n common? ______________________How does this affect the solution?
A horse accelerates from rest for 1 s and covers a distance D. If instead the accelerates from rest with the same accelerations for 2 s will the distance it covers be equal to 2D, 4D, or 9D
Answers
Answer:
4D
Explanation:
We will use 2nd equation of motion in this question:
s = Vi t + (0.5)gt²
where,
s = distance covered
t = time taken
g = acceleration due to gravity
For t = 1 s:
s = D
Therefore,
D = (0 m/s)(1 s) + (0.5)g(1 s)²
D = 0.5g -------------- equation (1)
For t = 2 s:
s = D
Therefore,
s = (0 m/s)(1 s) + (0.5)g(2 s)²
s = 0.5g(4)
using equation (1):
s = 4D
therefore, correct answer is:
4D
Which experimental discovery led Niels Bohr to revise Rutherford's model of
the atom?
A. Most alpha particles pass straight through a thin sheet of gold
foil.
B. Electrons have more energy the farther they are from the nucleus.
C. A few alpha particles bounce off a thin sheet of gold foil.
D. The beam in a cathode ray tube is moved by an electric force.
Answers
Answer:
Electrons have more energy the farther they are from the nucleus.
Explanation:
A P E X
What may also be called breakers? Crusher, Grappler, Hydraulic Hammer, Trencher
Answers
A truck moving due south takes a turn and starts moving towards east while maintaining the same speed.
Its velocity remains constant.
It covers unequal distances in equal intervals of time.
Its velocity changes
None of the above
Answers
Answer:
Its velocity changes
Explanation:
When the truck changes direction, its velocity changes.
Velocity is a vector quantity that specifies the magnitude of motion and direction it is taking.
When direction changes, the velocity of a body will also change. This is unlike speed which is a scalar quantity.
Velocity is the displacement divided by time taken.
Average acceleration of an object is the:
Change in its position divided by the change in time
Change in time divided by the change in its position
Change in its velocity divided by the change in time
Change in time divided by the change in its velocity
Answers
Answer:
Change in its velocity divided by the change in time
Explanation:
the equation for average acceleration (a) = (vf-vi)/t
a = (velocity final - velocity initial) / change in time