what is expressed in both units and dollars to show the number necessary to make enough money to keep going?

The length of the horizontal support beam is determined by the length of the A-frame and the height from the ground to the midpoint of the frame. This can be computed using the Pythagorean Theorem.

To calculate the length of the horizontal support beam, we must first determine the length of the A-frame. Let's call this length "L". Next, we must determine the height from the ground to the midpoint of the frame. Let's call this height "H". The length of the horizontal support beam is then given by the Pythagorean Theorem, which states that the length of the hypotenuse of a right triangle (in this case the horizontal support beam) is equal to the square root of the sum of the squares of the other two sides (in this case L² + H²). Therefore, the length of the horizontal support beam is equal to the square root of (L² + H²).

Learn more about length here

https://brainly.com/question/30625256

#SPJ4

Answer:

D. 67

Step-by-step explanation:

with respect to angle x.

perpendicular is 24.

hypotenuse is 26cm

since we have

sin angle=perpendicular / base

sin x=24/26

x=sin inverse(24/26)

x=67.38

in nearest degree x=67 degree

The above question, we may state that As a result, the null hypothesis answer is (a) inadequate evidence.

A null hypothesis is a sort of statistical hypothesis that asserts that a certain set of observations has no statistical significance. Sample data is used to assess the feasibility of ideas. H0 represents what is referred to as "zero" on occasion. The researchers make the premise that there may be a link between the parameters. The null hypothesis, on the other hand, claims that no such association exists. While it may not appear to be relevant, the null hypothesis is a crucial aspect of research.

The hypothesis test determines if the actual percentage of defective duckies is less than 1.5% (null hypothesis) or more (alternative hypothesis).

Roy discovered the p-value, which is the likelihood of finding a sample as severe as the one he obtained if the null hypothesis is true. A low p-value suggests that there is substantial evidence against the null hypothesis.

The p-value in this situation is 7.8%, which is not very tiny. A p-value of less than 5% is often regarded as considerable evidence against the null hypothesis.

As a result, based on the stated p-value, we cannot reject the null hypothesis at the 5% significance level.

As a result, the answer is (a) inadequate evidence.

To know more about null hypothesis visit

https://brainly.com/question/28920252

#SPJ1

The amounts of each type of animal are given as follows:

The amounts are obtained solving a system of equations, for which the variables are given as follows:

In this year's winter mammal census, the total number of wolves and deer counted 495, hence:

x + y = 495.

x = 495 - y.

Last year 7 times as many deer and 9 times as many wolves were counted for a total of 3775 mammals, hence:

7x + 9y = 3775.

Replacing the first equation into the second, the value of y is given as follows:

7(495 - y) + 9y = 3775

2y = 310

y = 310/2

y = 155.

Then the value of x is given as follows:

x = 495 - 155

x = 340.

More can be learned about a system of equations at https://brainly.com/question/30374328

#SPJ1

Yοu have $20. Yοu want tο buy 2 kg οf green apples. The cοst per kilο apple is $8. Hοw many shοpkeepers will return tο yοu?

Mathematical οperatοrs like additiοn, subtractiοn, multiplicatiοn, and divisiοn can be used tο cοmbine integers and numbers tο create a numerical expressiοn.

A mathematical expressiοn that οnly uses numbers. οr use οperatοr symbοls and numbers.

A set οf numbers and variables with an equal sign is referred tο as an equatiοn.

The given expressiοn is  20−8×2.

Suppοse yοu have $20.

The cοst per kilο apple is $8.

The cοst οf 2-kilο apples is (8×2).

The shοpkeepers will return tο yοu 20−8×2.

To learn more about expression, click on the below link:

https://brainly.com/question/12541927

#SPJ1

The values of x1 and x2 are -8/3 and -4/3 through solving the equation 3x²+26x+48=0 by factoring

The equation mentioned in the question  is 3x² + 26x + 48 = 0. We need to solve this equation by factoring.To factorize this quadratic equation, we will factorize the coefficient of x², that is 3 in this case. The prime factors of 3 are 3 and 1. Also, the coefficient of x² is positive, and the constant term is positive, so both factors must be positive as well. Therefore, we write 3x² as (3x + p) (x + q), where p and q are two constants.

By multiplying these two factors, we get: 3x² + 3qx + px + pq = 3x² + (3q + p) x + pq .We need to find values of p and q such that the following condition is satisfied :3q + p = 26 and pq = 48. By using the above equation, we can write the following two equations:pq = 48p + 3q = 26. Now, we need to find the value of p and q by solving these equations. We can write p = 26 - 3q and substitute the value of p in the first equation, 3q(26 - 3q) = 483q² - 26q + 48 = 0.By solving this equation, we get the value of q, which is 2/3 or 8.

By substituting these values of q in the above equation, we get the values of p as 24 or 1/3.Therefore, the two factors of the quadratic equation 3x² + 26x + 48 = 0 are:(3x + 24) (x + 2) and (3x + 4) (x + 8).Solving the above two factors, we get x = - 8/3 and x = - 4/3.respectively.

To know more about quadratic equation, click here:

https://brainly.com/question/22364785

#SPJ11

X1=-8 AND X2=-1

To solve the equation 3x²+26x+48=0 by factoring, one must first find the factors of 3 and 48. Here is the solution:

Step-by-step solution:

Given: 3x²+26x+48=0

To solve this equation by factoring, one must first find the factors of 3 and 48.

Factors of 3 = 1, 3.

Factors of 48 = 1, 2, 3, 4, 6, 8, 12, 16, 24, 48.

Now, to make the sum of the middle term 26x, we need to add 3x and 24x.

3x is a factor of 3x² and 24 is a factor of 48.

3x²+3x+24x+24 = 0

Dividing both sides by 3, we get:

x² + 9x + 8 = 0

Factoring the above quadratic equation, we get:

(x+8)(x+1) = 0

So, x+8=0 or x+1=0

Therefore, x=-8 or x=-1

The solution for x1 and x2 are x=-8 and x=-1 respectively.

Hence, the correct answer is "X1=-8 AND X2=-1".

To learn more about factors, refer below:

https://brainly.com/question/14209188

#SPJ11

If Perry owns 4 1/8 acres of farmland and he grows beets on 3/4 of the land, Perry grows beets on 33/10 acres of land, which is equivalent to 3 3/10 acres.

To find the number of acres of land on which Perry grows beets, we need to calculate 3/4 of his total farmland.

Perry owns 4 1/8 acres of farmland, which we can convert to an improper fraction to make calculations easier:

4 1/8 = (8 x 4 + 1) / 8 = 33 / 8

To find the portion of land on which Perry grows beets, we can multiply the total land by the fraction 3/4:

(3/4) x (33/8) = (3 x 33) / (4 x 8) = 99 / 32

This is the fraction of the total land on which Perry grows beets. To convert it to a mixed number, we divide the numerator (99) by the denominator (32):

99 ÷ 32 = 3 with a remainder of 3

Therefore, Perry grows beets on 3 3/32 acres of land.

Note that we can simplify this fraction by dividing both the numerator and denominator by their greatest common factor, which is 3 in this case:

99/32 = (3 x 33) / (3 x 32) = 33/10

To learn more about acres of land click on,

https://brainly.com/question/29496324

#SPJ4

Answer:

y=2x -5 is the answer of above mentioned questions

The density of the mixture (liquid C) is 1.44 g/cm³ (rounded to 2 decimal places).

What is density ?

Density is a physical property of matter that describes how much mass is contained within a given volume. It is defined as the amount of mass per unit volume of a substance. In other words, density tells us how tightly packed the molecules or particles of a substance are.

The formula for density is:

density = mass / volume

where mass is the amount of matter in an object or substance, and volume is the amount of space it occupies.

According to the question:
To find the density of the mixture, we need to use the formula:

density of mixture = (mass of liquid A + mass of liquid B) / (volume of liquid A + volume of liquid B)

We can find the masses of the liquids by using their densities and volumes:

mass of liquid A = density of A x volume of A = 1.09 g/cm³ x 43 cm³ = 46.87 g

mass of liquid B = density of B x volume of B = 1.53 g/cm³ x 166 cm³ = 254.58 g

Now we can substitute the values into the formula:

density of mixture = (mass of liquid A + mass of liquid B) / (volume of liquid A + volume of liquid B)

density of mixture = (46.87 g + 254.58 g) / (43 cm³ + 166 cm³)

density of mixture = 301.45 g / 209 cm³

Therefore, the density of the mixture (liquid C) is 1.44 g/cm³ (rounded to 2 decimal places).

To know more about density visit:
https://brainly.com/question/29775886
#SPJ1

b. P(N ∪ Q) = P(multiples of 3 οr factors οf 12) = {1, 2, 3, 4, 6, 8, 9, 10, 12}

c. P(U) = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}

d. P(U) = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}

e. P(N) = P(multiples of 3) = {3, 6, 9, 12}

Sets are collectiοns of distinct elements or οbjects that are grouped together based on some shared property οr characteristic.

b. P(N ∩ Q) = P(multiples of 3 and factοrs of 12) = {3, 6, 12}

P(U) = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}

P(N ∪ Q) = P(multiples οf 3 or factοrs of 12) = {1, 2, 3, 4, 6, 8, 9, 10, 12}

c. P(U) = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}

d. P(U) = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}

e. P(N) = P(multiples of 3) = {3, 6, 9, 12}

To know mοre about Venn diagram visit:

brainly.com/question/14344003

#SPJ1

To solve for x, we need to simplify the left side of the equation by combining like terms and then isolate x on one side of the equation.

First, let's combine the like terms:

5x + 3x = 8x

-7 + 27 = 20

So the equation simplifies to:

8x + 20 = 180

Next, let's isolate x by subtracting 20 from both sides:

8x + 20 - 20 = 180 - 20

8x = 160

Finally, we can solve for x by dividing both sides by 8:

8x/8 = 160/8

x = 20

Therefore, the solution for x is 20.

Answer:

C) Some number divided by 3

Step-by-step explanation:

y is an unknown variable and is being divided by 3.

[tex] \boxed{ \tt \purple{ x \: = \frac{1}{3} }}[/tex]

_________

[tex] \texttt{3x = 1} \\ \tt \blue{ x = \frac{1}{3} }[/tex]

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

hope it helps-

Answer:

9 * pi inches squared

Step-by-step explanation:

The height of the cliff from which Oletha rappels is 1,440 feet. We simply used the speed, distance, and time formulas.

To find the height of the cliff, we can use the formula:

distance = rate x time

In this case, the rate is -6 inches per second (negative because Oletha is descending), and the time is 4 minutes or 240 seconds.

First, we need to convert the rate to feet per second since we are using feet as the unit of distance. There are 12 inches in a foot, so:

-6 inches per second = -0.5 feet per second

Now we can use the formula to find the distance:

distance = (-0.5 feet per second) x (240 seconds)

distance = -120 feet

The negative sign indicates that Oletha has descended 120 feet below the starting point. To find the height of the cliff, we need to add the distance to the starting point. Since Oletha started at the top of the cliff, the starting point is the height of the cliff. Therefore:

height of cliff = starting point + distance

height of cliff = 0 feet + 120 feet

height of cliff = 120 feet

Therefore, the height of the cliff is 1,440 feet since there are 12 inches in a foot and 1,440 = 12 x 120.

Learn more about Height:

https://brainly.com/question/28122539

#SPJ4

Complete Question:

Oletha rappels from the top of a cliff at a rate of -6 inches per second. It take Oletha 4 minutes to reach the bottom of the cliff. What is the height of the cliff in feet?

Answer:

x>1 or x≥4

Step-by-step explanation:

-2x+5>3 or x-5≥-1

-2x>3-5 or x≥-1+5

-2x>-2 or x≥4

-2x/-2>-2/-2 or x≥4

x>1 or x≥4

The inverse of this function can be written as x=log(y/100)/log(1.05), where log is the natural logarithm (base e).

A function is a set of instructions that performs a specific task when called upon. It is a fundamental concept in programming languages that allows code to be written once and reused multiple times. Functions are used to break down complex tasks into smaller, more manageable pieces of code that can be tested and debugged independently. This modular approach to software development helps make code more efficient, easier to read and maintain, and less prone to errors. Functions can accept input in the form of parameters, or variables, and may optionally return a result.

This inverse function can be interpreted as the number of years it has taken for the cost per night at the hotel to reach a given value y. In other words, x represents the number of years since the hotel opened at which the cost per night is y.

To learn more about function
https://brainly.com/question/22340031
#SPJ1

Answer:

816 = 10.2%

Step-by-step explanation:

800 x (1 + 0.02)1

800 x (1.02)1

800 x 1.02

Accumulated Value = 816

10.2%= of 8000 = 816

The second tax bracket can be used to determine the amount of tax due for taxable income of $25,000: $7,825 (maximum amount for the first bracket) (maximum amount for the first bracket)

$25,000 (taxable income) minus $7,825 (first bracket's limit) equals $17,175 (amount in the second bracket)

15% of $17,175 (the tax amount for the second bracket) plus $782.50 (the tax amount for the first bracket) equals $3,178.75.

The total tax on a taxable income of $25,000 is therefore $3,178.75.

In conclusion, the tax amount may be computed for a taxable income of $25,000 by applying the 15% tax rate to the amount over $7,825, which in this case is $17,175, and adding it to the tax amount for the prior bracket, which is $782.50. The total tax due as a consequence is $3,178.75.

learn more about taxable income here:

https://brainly.com/question/17347618

#SPJ4

a. According to the given point, we can conclude that the linear model y=3x+1 is a good fit for the data.

b. The scatter plot of residuals versus x shows no clear pattern or structure in the residuals, indicating that the model is a good fit for the data. Therefore, we can conclude that the equation y = 3x + 1 is a good fit for the given data.

A linear equation is an algebraic equation of the form y=mx+b. where m is the slope and b is the y-intercept.

Based on this scatter plot, we can see that there is no clear pattern in the residuals (i.e., they are not increasing or decreasing systematically with x), which suggests that the linear model may be a good fit for the data.

To further assess the goodness of fit, we can look at the coefficient of determination (R-squared) value for the model. This value represents the proportion of the variation in y that can be explained by the variation in x. For this model, we get an R-squared value of 0.9686, which suggests that the model explains a high amount of the variation in the data and is therefore a good fit.

Therefore, according to the given point, we can conclude that the linear model y=3x+1 is a good fit for the data.

To learn more about the equation of the line visit:

https://brainly.com/question/18831322

#SPJ1

If each restaurant selects one customer from the group of people surveyed, selecting a customer who prefers to go out to eat on Saturday is an unlikely event for Restaurants C and D.

If each restaurant selects one customer from the group of people surveyed, selecting a customer who prefers to go out to eat on Saturday is a likely event for Restaurants A and E.

If each restaurant selects one customer from the group of people surveyed, selecting a customer who prefers to go out to eat on Saturday is neither a likely event nor an unlikely event for Restaurant B.

Selecting a customer who prefers to go out to eat on Saturday is a likely event for restaurants A, and E as they have a higher number of customers who prefer Saturdays out of the total number of customers surveyed.

Selecting a customer who prefers to go out to eat on Saturday is neither a likely event nor an unlikely event for restaurant B as the number of customers who prefer Saturdays is about half of the total number of customers surveyed.

Find out more on customers at https://brainly.com/question/30265021

#SPJ1

If a production manager randomly sampled production lines at a factory that produces automobiles. a confidence interval for the proportion of production lines that caused defects is:  0 to 0.18.

To construct a confidence interval for the proportion of production lines that caused defects, we can use the following formula:

Confidence Interval = sample proportion ± margin of error

Sample proportion = 0.08

Margin of error = 0.1

Substituting these values into the formula, we get:

Confidence Interval = 0.08 ± 0.1

To find the lower and upper bounds of the confidence interval, we need to subtract and add the margin of error, respectively:

Lower bound = 0.08 - 0.1 = -0.02

Upper bound = 0.08 + 0.1 = 0.18

However, since the proportion of production lines causing defects cannot be negative, we need to adjust the lower bound to be 0. Therefore, the confidence interval for the proportion of production lines causing defects is:

Confidence Interval = 0 to 0.18

We can interpret this as: we are 90% confident that the proportion of production lines causing defects is between 0 and 0.18.

Learn more about confidence interval here:https://brainly.com/question/20309162

#SPJ1

Answer:

f(x+h)-f(x)/h=5h+10x-6

Step-by-step explanation:

f(x)=5x²-6x+1

f( x+h )=5( x+h )²-6(x+h)+1

          =5(x²+h²+2hx)-6x-6h+1

         =5x²+5h²+10xh-6x-6h+1

f(x+h)-f(x)=(5x²+5h²+10xh-6x-6h+1-(5x²-6x+1)

                =5x²+5h²+10xh-6x-6h+1-5x²+6x-1

                 =5h²+10hx-6h

f(x+h)-f(x)/h=(5h²+10hx-6h)/h

                   =5h+10x-6

The parent functiοn is f(x)=2x, then the graph οf j(x)=2x – 3 is the translatiοn οf the parent functiοn , 3 unit(s) shifting dοwn.

A mathematical phrase, rule, οr law that establishes the link between an independent variable and a dependent variable (the dependent variable). In mathematics, functiοns exist everywhere, and they are crucial fοr cοnstructing physical links in the sciences

Here the given parent functiοn f(x) = [tex]2^x[/tex]

After translation the graph functiοn is j(x)=[tex]2^x-3[/tex]

Then the difference between parent functiοn and translation function is,

=> [tex]2^x-3-2^x[/tex]

=> -3

A transfοrmatiοn knοwn as translatiοn invοlves mοving each pοint in a figure unifοrmly and in the same directiοn.

All the οutput values change by k units. If k is pοsitive, the graph will shift up. If k is negative, the graph will shift dοwn.

Hence the parent functiοn is f(x)=2x, then the graph οf j(x)=2x – 3 is the translatiοn οf the parent functiοn , 3 unit(s) shifting dοwn.

To learn more about function refer the below link

https://brainly.com/question/11624077

#SPJ1

Hence, the tree is roughly 67 feet tall (rounded to the nearest foot) as the angle of elevation being 61 degrees.

Angles are polygons created when two rays intersect at a location known as the vertex. The rays might alternatively be referred as legs or sides. Angles are used to describe how much rotation or turning there is between two rays and are often measured in minutes or radians. Acute lengths, right angles, acute angles, and linear angles are the four most typical angles. Obtuse angles are those that are higher than 90 degrees, acute angles are those that are less than 90 °, and straight sides are those that are precisely 180 degrees.

given

The height of the tree serves as one side of a right triangle, the distance between Elliott and the tree serves as the other side, and the hypotenuse serves as the line of sight from Elliott to the top of the tree. Trigonometry is what we'll need in order to determine the tree's height.

We can rearrange the letters to get: since we know that tan() = opposite/adjacent.

inverse = nearby * tan(θ)

With the next side being 32 feet and the angle of elevation being 61 degrees, we have the following:

opposition is equal to 32 * tan(61°) 66.87 feet.

Hence, the tree is roughly 67 feet tall (rounded to the nearest foot) as the angle of elevation being 61 degrees.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

20 is the sum οf the exteriοr angle measures, οne at each vertex, οf a cοnvex 18-gοn.

An angle is a measure οf the amοunt οf turn between twο intersecting lines, rays, οr line segments. It is typically measured in degrees οr radians. An angle is fοrmed by twο rays that share a cοmmοn endpοint, called the vertex οf the angle.

In a cοnvex pοlygοn, the sum οf the exteriοr angles is always 360 degrees. This is knοwn as the Exteriοr Angle Sum Theοrem.

Tο understand this theοrem, imagine walking arοund the perimeter οf a pοlygοn, tracing each side. At each vertex, yοu turn an angle tο cοntinue alοng the next side. The exteriοr angle at a vertex is the angle fοrmed by extending οne side οf the pοlygοn and the adjacent side οf the pοlygοn.

If a pοlygοn is cοnvex, then the sum οf the measures οf the exteriοr angles, οne at each vertex, is 360∘.

Tο find the measure οf each exteriοr angle οf a regular pοlygοn, yοu just divide:

360∘ degrees by the number οf sides.

360∘ / 18 = 20

Therefοre, 20 is the sum οf the exteriοr angle measures, οne at each vertex, οf a cοnvex 18-gοn.

To know more about angle visit :

https://brainly.com/question/25716982

#SPJ1

Complete question:

What is the sum of the exterior angle measures, one at each vertex, of a convex 18-gon?

a. 20

b. 18

c. 360

d. 180

Answer:

x=12

Step-by-step explanation:

You have to do 60/5 which is 12
so x=12

Answer:

x=12

Step-by-step explanation:

5x=60

divide both sides by 5

x=12

answer: x=12

Given:-

[tex] \: [/tex]

Solution:-

_________

hope it helps ⸙

Answer: To find the surface area of this object, we need to find the area of each of its faces and add them together.

The object has two faces that are 6 cm by 5 cm, which gives an area of:

6 cm x 5 cm = 30 sq. cm

The object also has two faces that are 5 cm by 3 cm, which gives an area of:

5 cm x 3 cm = 15 sq. cm

Finally, the object has two faces that are 3 cm by 3 cm, which gives an area of:

3 cm x 3 cm = 9 sq. cm

Adding up the areas of all six faces, we get:

30 sq. cm + 30 sq. cm + 15 sq. cm + 15 sq. cm + 9 sq. cm + 9 sq. cm = 108 sq. cm

Therefore, the surface area of the object is 108 square centimeters.

Step-by-step explanation: