What factors are included on a phase diagram?
O A. Temperature and pressure
O B. Pressure and volume
O C. Mass and volume
O D. Heat and kinetic energy

Answers

Answer 1

Answer:

A. Temperature and pressure

Explanation:

The factors included in a phase diagram are the temperature and pressure conditions.

A phase diagram is a combined plot of three curves all in equilibrium;

Solid- liquid, liquid -gas, and solid -gas plots

On the vertical axis, we usually have the pressureOn the horizontal axis is where the temperature is represented. Most phase diagrams are used in chemistry and mineralogy to show areas in which different phases can exist at equilibrium.
Answer 2

The factors included on a phase diagram are temperature and pressure and the correct option is option A.

A phase diagram is a graphical representation that shows the different phases of a substance (solid, liquid, and gas) as a function of temperature and pressure. It provides valuable information about the conditions at which different phases can exist and the boundaries between them.

The temperature is typically plotted on the horizontal axis, while the pressure is plotted on the vertical axis.

By examining a phase diagram, one can determine the melting point, boiling point, and critical point of a substance, as well as the regions of stability for each phase. Additionally, phase diagrams can reveal the existence of phase transitions such as melting, boiling, and sublimation.

Thus, the ideal selection is option A.

Learn more about Phase diagram, here:

https://brainly.com/question/34149833

#SPJ6


Related Questions

True or False: A Precipitate is a solid
that forms out of a liquid solution as a
result of a chemical reaction

Answers

Answer:

true because it undergoes a tranformation

Explanation:

which of the following elements would decrease in size when it became an ion

Answers

Answer:

nickel, cobalt would decrease in size when it became an iron

What is Arsenic cost per unit?

Answers

Answer:

arsenic costs $320 per 100g

Explanation:

How do I do this problem???

Answers

Answer:

i believe it's c

Explanation:

my reason is that if you look at the electrons 2 is the most comm

Kinetic molecular theory states... (choose all that apply)

A. There is a chemical change when a solid melts to a liquid.
B. Particles that make up matter have kinetic energy.
C. Particles that make up matter are always in motion

Answers

I think it’s B hopefully

What is the mass of 4.39 mol Na?

Answers

Answer:

101 g Na

Explanation:

To convert between moles and grams, you have to use the molar mass of the substance. The molar mass of sodium is 22.99 g/mol. You use this as the unit converter.

[tex]4.39molNa*\frac{22.99gNa}{1molNa} = 100.9261gNa[/tex]

Round the number to the lowest number of significant figures; 101 g Na.

The mass of 4.39 moles of sodium (Na) is 100.97grams.

HOW TO CALCULATE MASS:The mass of a substance can be calculated by multiplying the number of moles in the substance by its molar mass. That is;

Mass = no. of moles × molar mass

According to this question, there are 4.39 moles of Na. The molar mass of Na is 23g/mol.

Mass of Na = 4.39 × 23

Mass of Na = 100.97grams.

Therefore, mass of 4.39 moles of sodium (Na) is 100.97grams.

Learn more about mass calculations at: https://brainly.com/question/8101390

Which statement best explains why the air pressure is greater at the poles than at the equator

Answers

Answer:

At the equator, the altitude is lower, and also because of the direct heating of sun rays on the surface, the temperature is much higher than at the poles. This makes the air near the surface hot and lighter and hence it rises up which results in lower air pressure.

Explanation:

Plz give me brainliest .-.

What explains the structure of metals and delocalized electrons?

A. the unit cell model

B. the geometric shape model

C. the covalent bond model

D. the electron sea model

Answers

D the electron sea model

1 pc
Calculate the volume of a an object that has a height of 14.3cm, length or
25.2cm, width of 6.7cm. *
46.2cm
2414.412 cm
0.085 cm
53.785 cm

Answers

Answer:0.085

Explanation:

Which of the following is the correct model of C7H16?
A.
B.
C.
D.

Answers

Answer:

D

Explanation:

Option D gives the correct model of C7H16. From the option, one will discover that the model has 7 carbons in the backbone. If you count the attached hydrogen, you will discover that the hydrogen is 16 in total.

This model or skeletal structure of this element represents heptane. Heptane or n-heptane is known to be a straight-chain compound and an alkane. It's chemical formula can also be written as: H₃C(CH₂)₅CH₃ or C₇H₁₆.

This compound is known to be one of the main components of gasoline. It is known to be a volatile organic compound and a clear and colorless liquids with a petroleum-like odor.

Answer: D

Explanation: Just took the test

what is the median number of 69,64,63,66?

Answers

the answer is 67.5. hope this helps
65

First put them in order from least to greatest. Then remove outer numbers. You are then left with 64 and 66. The number in the middle of 64 and 66 is 65.

I need help with the 2nd part first gets brainlist

Answers

Answer:

7. 4H₂O

Elements: Hydrogen, Oxygen

Number of molecules: 4

Number of elements: 8 H, 4 O

Number of Atoms: 12

Explanation:

The elements are determined by the their symbol i.e. H = hydrogen.

The number of molecules is determined by the coefficient ( the number in front of everything, in this case 4).

The number of elements is determined by the coefficient and the subscripts. Multiply the coefficient by the subscript after each element. When there is no subscript, it is equal to 1.  4H₂ = 4x2 = 8;  4O = 4x1 = 4.

The number of atoms is all the individual elements added together. 8+4 = 12.

A balloon is a sphere with a radius of 5.0 m. The force of air against the walls of the balloon is 45 N. What is the air pressure inside the balloon? Surface area = 12.56 × radius² 1 Pa = 1 N/m² How would I solve this problem? What are the steps or a good way to remeber how to solve?

Answers

Answer:

0.127 N/m² or 0.127 Pa

Explanation:

From the question given above, the following data were obtained:

Radius (r) = 5 m

Force (F) = 40 N

Pressure (P) =.?

Next, we shall determine the Surface area of the sphere (i.e the balloon). This can be obtained as follow:

Surface area = 12.56 × r²

Radius (r) = 5 m

Surface area = 12.56 × 5²

Surface area = 12.56 × 25

Surface area = 314 m²

Finally, we shall determine the pressure as follow:

Force (F) = 40 N

Surface area = 314 m²

Pressure (P) =.?

Pressure = Force /Area

Pressure = 40/314

Pressure = 0.127 N/m² = 0.127 Pa

Therefore, the pressure inside the balloon is 0.127 N/m² or 0.127 Pa.

Which of the following best describes how Thomson
concluded that electrons are present in all atoms.
a
The charge-to-mass ratio of electrons is always the
same constant, no matter which substances are
used in the cathode ray tube.
b The cathode ray was able to turn a wheel.
The cathode ray always bent toward a negatively
charged plate.
d
The charge-to-mass ratio is unique to each different
element.

Answers

Answer: A

Explanation:

The charge-to-mass ratio of electrons is always the same constant, no matter which substances are used in the cathode ray tube.

Explanation:

Thomson in his model of atom discussed that the atom consists of a negative charge particle termed electron randomly distributed in the positively charged sphere to balance the negative charge.His model of the atom was also known as the Plum pudding model of the atom. In which electrons are embedded in positive soup.He discovered electrons by conducting an experiment with cathode rays in which cathode rays emerging from the cathode were observed to be deflected towards the positively charged plate.He also conducted the same experiment with different metals (for anode and cathode) and gases and found out that the charge to mass ratio of the electron was regardless of the metals or gases used in the experiment.With this, he landed on the conclusion that these particles of cathode rays are the universal component of matter.

So, from this, we can conclude that the charge-to-mass ratio of electrons is always the same constant, no matter which substances are used in the cathode ray tube describes Thomson's conclusion that electrons are present in all atoms.

Learn more about J.J. Thomson's model of atom here:

brainly.com/question/2437167?referrer=searchResults

brainly.com/question/1874920?referrer=searchResults

What is the mass of an object with a density of 5.7 g/cm^3 and a volume of 48
cm^3? *

Answers

Answer:

273.6 g

Explanation:

mass =(density)(volume)

mass=(5.7g/cm^3 )(48 cm^3)

cancel out your cm^3 and your are left with grams

multiply (5.7g)(48)=273.6 g

The mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.

What is density?

Density is defined as the degree to which a material is packed together.

It is also defined as a mass per unit volume of the substance.

Its SI unit is kilogram per cubic meter or  gram per meter.

Density can be expressed as

Density = mass / volume

Mass =  density x volume

As given, Density = 5.7 g/cm³

                Volume = 48 cm³

So, Mass =  5.7 g/cm³ x  48 cm³

               =  273.6 grams

Thus, the mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.

To learn more about density, refer to the link below:

https://brainly.com/question/15164682

#SPJ5

stages of mitosis in order

Answers

Answer:

nucleus formed

prophase

metaphase

anaphase

telophase and cytokinesis

a molecule for sulfur dioxide consists of one sulfur atoms (S) and two oxygen atoms (0). what is the chemical formula for this compound

Answers

SO2 is the chemical formula for sulfur dioxide, usually when it says dioxide it means two O’s (O2——-> O+O).

Identify the property of the matter described below.

Alcohol floats on top of the water.
A-pH
B-conductivity
C-density
D-luster

Answers

Answer: C.

Explanation: Alcohol floats on oil and water sinks in oil. Water, alcohol, and oil layer well because of their densities, but also because the oil layer does not dissolve in either liquid. The oil keeps the water and alcohol separated so that they do not dissolve in one another. ... Water sinks because it is more dense than oil.

Which types of matter are made of atoms

a. Mixtures
b. Elements
C. Compounds
D. All of the above

Answers

Answer:

D all above yes I think it's all above

Answer:  D

Explanation: All of the above.

Plz mark brainliest:)

During evaporation, what causes certain liquid molecules to become vapor molecules? A. Decreased fluidity A. Increased viscosity A. Decreased kinetic energy A. Increased kinetic energy.

Answers

Answer:

The answer is A. Decreased Fluidity

Explanation:

Taking the test on preformance matters

In evaporation, particles of liquids take energy in the form of sunlight from the surrounding and then convert into vapor phase. Increased kinetic energy causes certain liquid molecules to become vapor molecules.

What is evaporation?

Evaporation is a physical process in which the water in liquid state converts to gaseous state at the temperature below its boiling point. Evaporation happens before the boiling process.

Evaporation causes cooling effect in the surrounding. During summer when water is kept in earthen pot water cools, this is because of the evaporation process.

Evaporation is affected by temperature. As the temperature increases, kinetic energy of liquid molecules also increases and hence the rate of evaporation increases.

Therefore, increased kinetic energy causes certain liquid molecules to become vapor molecules.

To know more about evaporation, here:

https://brainly.com/question/8169606

#SPJ2

How many moles are in 12.6 grams of K2S?

Answers

0.11427369093138474 that’s what I got

3.58 x 1023 molecules of propane C8H8 would occupy how much space at STP

Answers

Answer: At STP, a mole of gas takes up 22.4 Liters. The 22.4 Liters/mole quantity can be derived from the Ideal Gas Law, PV = nRT, plugging in STP conditions for P and T, and solving for V/n, which gets 22.4 Liters/mole.

Explanation:

Michelle learns in science class that simple machines such as an inclined plane can change the amount of force needed to lift heavy objects. She decides to test this with an experiment.



Michelle chooses a 10 kg weight. She sets up a ramp made of smooth metal that makes an angle θ with the floor. She attaches a spring scale to the weight and the top of the ramp in order to hold the weight in place. She records the force from the spring scale, then changes θ and records it again. She repeats this several times.


In this experiment, what is the dependent variable?

A.

the mass of the weight

B.

the angle θ between the ramp and the ground

C.

the amount of force on the spring scale

D.

the material the ramp is made of
Be fast please

Answers

I think it may be c I’m sorry if it’s wrong

What is force and motion

Answers

force is a strength or energy as an attribute or physical action or movement, motion is the action or process of moving or being moved

Answer:

In physics, a force is any interaction that, when unopposed, will change the motion of an object. A force can cause an object with mass to change its velocity (which includes beginning moving from a state of rest), i.e., to accelerate. Force can also be described intuitively as a push or a pull.

= google

lol

25 cm of liquid 'A' and 20 cm of liquid
'B' are mixed at 25°C and the volume of
solution was measured to be 44.8 cm3
then correct reaction is
(A) A Hmix = 0, solution shows
ideal

Answers

Answer:

The correct option is;

(B) [tex]\Delta H_{mix} < 0[/tex], solution shows negative deviation

Explanation:

The given parameters are;

The available volume of liquid A = 25 cm³

The available volume of liquid B = 20 cm³

The volume of the solution (mixture) = 44.8 cm³

Therefore, we have;

[tex]\Delta _{mix} V < 0[/tex]

Which is one of the prerequisite for the formation of negative deviation

When a non-ideal solution shows negative deviation according to Raoult's Law, we have;

[tex]\Delta _{mix} H < 0[/tex], we have more heat released due to new molecular interactions.

Would love some help pleaseee. and please at least read the question instead of skipping it please.

Measuring tools can have errors. Errors lead to ___________________ results and _______________ conclusions. To calculate the difference of the accepted value and the experimental value, scientists use this formula:
percent error = (experimental value − ) × 100. accepted value
Minimizing Bias
People show bias when they want everyone to accept their results. Bias can arise for many reasons:
• Companies show bias when they depict only the research details that are in the best interest of their ____________.
• Scientists may be biased toward their _____________ and modify results suit their needs.
• Scientists may also show to bias get their research published in ______________ ______________.
Such biases often lead to _______________ facts. An important part of scientific thinking is identifying biases and taking the necessary steps to minimize them.
For results to be considered scientifically accurate, any scientist, regardless of his or her own bias, should be able to replicate the experiment and get the same results.
Summary
Think of some studies you’ve heard about. How can you tell whether the studies were well-designed and scientifically accurate or had biases?

Answers

Answer: this looks like your homework

Explanation:if you want help you are going to have to ask a specific question instead of giving people your homework.

Answer:

Honestly I would search this up maybe there might be a pdf with the answers. Sorry chemistry isn't my thing:(

Explanation:

When many earthquakes are studied, there is another common pattern that emerges: a "Shadow Zone". This is an area, for any earthquake, on the Earth where direct S-waves don't arrive at all and P waves are refracted. What do you think causes these P waves to be refracted? *

Answers

Answer:

Sudden decrease in the velocity at the boundary.

Explanation:

The shadow zone is the zone of the earth from angular distances of 104° to 140° from a known earthquake that does not directly receive any P waves. Now, this shadow zone occurs as a result of S waves getting stopped completely by the liquid core and the P waves being refracted by the liquid core.

From earlier seismic discoveries, this boundary which is the shadow zone that does not directly receive any P-waves was found to be due to the fact that the P-waves were refracted inwards as a result of the sudden decrease in velocity at the boundary.


A total of eighteen electrons can be placed into the 3rd energy level.
Explain WHY?

Answers

Answer:

each principal energy level above the second contains, in addition to one s orbital and three p orbitals, a set of five d orbitals, called the d sublevel. The five d orbitals can hold up to 10 electrons. Thus, the third level holds a maximum of 18 electrons: 2 in the s orbital, 6 in the three p orbitals, and 10 in the five d orbitals.

Explanation:

Help it’s for a test!!!!!!!!!!!How many moles are in 2.16 x 1023 atoms of magnesium?
A. 35.9 moles
B. .359 moles
C. 7.18 moles
D. 0.359 moles
E. 0.90 moles

Answers

the answer is 35.9 moles

Which of the following elements would be brittle?
Sulfur
Magnesium
Rubidium
Lithium

Answers

Answer:

Sulfur

Explanation:

Sulfur because it is a dull and brittle
Other Questions
What does the study of embryology tell us about evolution? 1. Which English king was beheaded by Puritan forces in 1649 Marc eats an egg sandwich for breakfast and a big burger for lunch every day. The egg sandwich has 250 calories. If Marc has 5,250 calories for breakfast and lunch for a week in total, how many calories are in one big burger. Please help will give brainliest (please dont answer if you dont know it) The two lines graphed below are not parallel. How many solutions are there tothe system of equations? Write a personal narrative essay that describes a significant experience that has shaped your identity. Develop the narrative through pacing, dialogue, and details that engage the reader plz right one that has to do with gaming A ticket to see your favorite baseball team costs $30.08. That price decreases by $0.42 for every game lost during the regular season. What equation could you use to find the cost C of a ticket after L losses? Represent the total change in the cost of a ticket after the team loses 27 games. What is the price of a ticket after the team loses 27 games? Solve: 1(3/5) + -2(4/5) = Find the slope of the line that passes through the points (2,6 ) and ( 4 , 12) Bird Corp.'s trademark was licensed to Brian Co. for royalties of 15% of the sales of the trademarked items. Royalties are payable semiannually on March 15 for sales in July through December of the prior year, and on September 15 for sales in January through June of the same year. Bird received the following royalties from Brian: March 15 September 15 20X4 $5,000 $7,500 20X5 6,000 8,500 Brian estimated that the sales of the trademarked items would total $30,000 for July through December 20X5. In Bird's 20X5 Income Statement, the royalty revenue should be:______. a. $13,000. b. $14,500. c. $19,000. d. $20,500. Features of a good house 1.5. Elaborate on the meaning of induction and explain its purpose. what is the least efficient way to roast a marshmallow using heat transfer conduction, convection, or radiation? Which equation is NOT written in slope-intercept form?Y= -9x2x-5=2y+14Y=7x+3Y=-3 HURRY it you give me the answer it on 10 mins Ill give brainiest!If you cant see it says family love is power emotion.this is a theme found within jungle book mowglis brothers which rear-life experience best helps readers connect to this theme 1.cheetahs and leopards both come from the cat family 2.brothers and sisters often grow up to become life-long friends3.spending the day at the zoo with friends is a lot of fun 4.family gatherings are a great time to catch up Multiply -2.6 (-3.4)= if 1 mile is 5280 feet, and it is 2 miles from Ellie's house to the school, about how many feet is it from ellie's house to the school? Look at the images below and order them from smallest to largest, using 1 for the smallest unit and3 for the largestPlant CellAtomMolecule Migration rates birth rates and death rates are always to measure changes in Solve the following equation algebraically. Show your work. 6=x+23