Answer:
Sharecropping tells me about
Explanation:
Sharecropping is a type of farming in which families rent small plots of land from a landowner in return for a portion of their crop, to be given to the landowner at the end of each year. Different types of sharecropping have been practiced worldwide for centuries, but with the southern economy in disarray after the abolition of slavery and the devastation of the Civil War, sharecropping enabled landowners to reestablish a labor force, while giving poor whites and freed Black people a means of subsistence. About two-thirds of sharecroppers were white, and one-third were Black. The system severely restricted the economic mobility of the laborers, leading to conflicts during the Reconstruction era.
The first step in developing a master stud pattern is to lay out the ____.
A. Position of the headers
B. Position of the sole plate
C. Distance from rough floor to ceiling
Answer:
C
Explanation:
Which of these is NOT one of the four A’s of defensive driving?
Action
Awareness
Anxiety
Analysis
2”x2”x 1/4” square tubing weighs 108.2lbs per 20. How many lbs. does one foot of the material weigh?
Where the above condition is given, one foot of 2”x2”x 1/4” square tubing weighs approximately 5.41 lbs. The above is solved using proportions.
What is proportions in Math?In mathematics, proportions refer to the comparison of two ratios, indicating that two ratios are equal. A proportion is typically expressed in the form of a/b = c/d, where a, b, c, and d are numbers or quantities
To find out how much one foot of the material weighs, we need to first calculate the weight of one piece of 2”x2”x 1/4” square tubing.
We know that one 20-foot piece of this tubing weighs 108.2lbs, so we can set up a proportion to find the weight of one foot:
20 feet / 108.2 lbs = 1 foot / x lbs
x = (1 foot x 108.2 lbs) / 20 feet
x = 5.41 lbs
Therefore, one foot of 2”x2”x 1/4” square tubing weighs approximately 5.41 lbs.
Learn more about weights on:
https://brainly.com/question/10069252
#SPJ1
Which of the following is NOT a common type of vehicle inspection? Select one:
a. State safety inspection
b. Certified used car inspection
c. Engine component analysis inspection
d. Vehicle pre-purchase inspection
Answer:
what is information systems
In which of these situations might competition be seen as a negative?
when the competition is taking place in a capitalist society
when the competition causes some businesses to fail
when the focus of the competition is on what may be seen as a public utility such as mass transit or utilities like electrical power
when the competition affects a high-tech industry
Answer:
Competition might be seen as a negative in the situation where it causes some businesses to fail. While competition can encourage innovation, lower prices, and improve quality, it can also lead to negative consequences such as the failure of businesses, loss of jobs, and market instability. In some cases, competition can also result in a lack of cooperation and collaboration among businesses, leading to a "winner takes all" mentality. When the competition causes some businesses to fail, it can have negative effects on the economy and society as a whole, such as unemployment and reduced consumer choice. Therefore, in this situation, competition may be viewed negatively.
given that tan theta =-3/4, 0°<theta 90°. find cos theta + sin theta.
Answer: cosθ + sinθ = -1/4.
Explanation:
cos theta + sin theta = -√(3^2 - 4^2) / 4 = -1/4
The given equation is tanθ = -3/4. We can use the Pythagorean identity to find cosθ and sinθ, which states that cos²θ + sin²θ = 1.
Since we know that tanθ = -3/4, we can substitute this value into the Pythagorean identity to get:
cos²θ + (-3/4)² = 1
Solving for cosθ gives us cosθ = √(3² - 4²) / 4 = -1/4.
Similarly, we can solve for sinθ to get sinθ = -3/4.
Now, we can add cosθ and sinθ together to get cosθ + sinθ = -1/4.
Sandy soil is made up mostly of
Sandy soil is mostly made of sand.
Sandy soil
Sand (having big particles with big spaces) constitutes the majority of sandy soil.
There isn't much clay or silt in it. Humus is incredibly scarce in sandy soil. In desert regions, you can find sandy soil.
Sandy soil is made up of large particles with large spaces between them.
Sandy soil can be easily plowed and gives plant roots good aeration (air). It is light soil, If left bare, it frequently blows away.
Compared to other soil types, sandy soil is less fertile. Sandy soil's fertility can be increased by incorporating humus in the form of manure.
The ability of sandy soil to retain water is improved by humus, which also supplies vital plant nutrients.
To learn more, visit
https://brainly.com/question/28724500
#SPJ1
While salary is definitely an important factor to consider when selecting a major to study it certainly isn’t the only thing you should take into account. What advice would you give to someone who chooses their major based only on salary why would u give this advice
Based on your observations of brightness, which battery would run out more quickly when the switches are closed?
When the switch is closed, current flows across the circuit, turning on the lightbulb. The bulb receives the full 120 volts it needs along with the intended current flow, enabling it to function at its brightest.
Does the number of batteries or the bulb itself determine how brilliant the light is?The number of bulbs added to a circuit will affect how bright they are. When additional bulbs are connected in series, they will share the circuit's electric current, which will reduce the brightness of the lights.
Which type of light bulb, parallel or series, produces more light?With a simple parallel circuit, the entire battery voltage is applied to each bulb. The lights on the parallel circuit are present for this reason.
As more lights are added, nothing happens if all of the bulbs are linked in parallel.
Each bulb becomes dimmer as more are added if they are all connected in series.
To know more about brightness of the bulb visit:-
https://brainly.com/question/171251
#SPJ1
All of these are part of a repair blueprinting process, EXCEPT:
A) determining total repair cost.
B)
straightening damaged parts.
C) removing parts from the vehicle.
D) taking initial measurements.
Determining total repair cost is not a part of the repair blueprinting process as it primarily focuses on diagnosing the problem and planning the repair work. The cost is considered later in the comprehensive repair process.
Explanation:The subject of this question pertains to the steps taken in a automotive repair blueprinting process. In this process, each of the options mentioned like taking initial measurements, straightening damaged parts, and removing parts from the vehicle are part of the process. However, the option of determining total repair cost is not inherently a part of the blueprinting process. While cost might be considered at some point in a comprehensive repair process, it is not intrinsically a step in blueprinting which is primarily focused on diagnosing the problem and planning the repair work.
Learn more about repair blueprinting process here:
https://brainly.com/question/34055386
#SPJ2
The robot program uses __________ commands to perform each operation. *
The robot program uses programming commands or instructions to perform each operation.
What is a robot program?A robot program is a set of instructions written in a programming language that directs a robot to perform specific tasks. It specifies the robot's movements, actions, and responses to different inputs or conditions, allowing it to carry out various functions autonomously or under human supervision.
Note that the commands referenced above are written in a programming language that the robot's control system can understand and execute. The specific set of commands available to the programmer depends on the programming language being used and the capabilities of the robot.
Learn more about robot program at:
https://brainly.com/question/29586661
#SPJ1
Which of the following is the
best option to secure to a
wall surface made with lath
and plaster?
A. Using a stud finder and securing
directly to the stud
B. A toggle bolt
C. A one hole strap
What is the role of the Interstate Commerce Commission?
to ensure fair and even pricing and limit amounts charged to customers
to carry out safety regulations imposed by the Occupational Safety and Health Administration (OSHA)
to remove pricing restrictions and limits on amounts charged to customers
to limit regulation to transportation companies that operate in multiple states
In the United States, the Interstate Commerce Act of 1887 established the ICC as a separate regulatory body. The main goal of the ICC was to control the operations and economics of certain carriers.
What was the Interstate Commerce Commission's purpose?The Interstate Commerce Commission was created to oversee the railroad business by the Interstate Commerce Act, which was adopted on February 4th, 1887. As a result of this act, the railroads were the first industry to be supervised by the federal government.
Where is the headquarters of the Interstate Commerce Commission?Contact the Office of Public Services at the Interstate Commerce Commission, located at Twelfth Street and Constitution Avenue NW, Washington, DC 20423, for further information. Phone, 202-927-5350.
To know more about operations visit:-
https://brainly.com/question/27960749
#SPJ1
What is an article critique
Answer:
it is a systematic way of objectively reviewing a piece of research to highlight both it's strength and weaknesses
What are some criteria and constraints that engineers must consider when designing home insulation? By the way this is science and please help me
The correct answer is When designing home insulation, engineers need to consider various criteria and constraints to ensure optimal energy efficiency and comfort while meeting safety and environmental regulations. Some of the key factors to consider are:
Climate: The insulation material must be chosen based on the climate in the area. For example, colder climates may require thicker insulation with higher R-values to prevent heat loss. Building materials: The type of insulation must be compatible with the building materials, including walls, roofs, and foundations. Health and safety: The insulation material must be safe for humans and the environment, free from harmful chemicals or substances, and comply with safety standards. Cost-effectiveness: The insulation design must be cost-effective, considering the initial cost of materials and installation as well as long-term energy savings. Durability: The insulation must be durable and able to withstand moisture, pests, and wear and tear. Installation requirements: The design must consider the ease of installation and maintenance, as well as any required safety precautions. Building codes and regulations: The insulation design must comply with local building codes and regulations. In summary, engineers must consider various factors when designing home insulation, including climate, building materials, health and safety, cost-effectiveness, durability, installation requirements, and building codes and regulations.
To learn more about various criteria click on the link below:
brainly.com/question/30115173
#SPJ1
Who can tell me what fighter jet this is below
A. F 14 tomcat
B. f 15 eagle
C. F 22 raptor
Answer:
A) F14 Tomcat.
Explanation:
It is definitely not a F22 raptor. The F14 and F15 looks similar, but they play different roles. It looks more like a F14 Tomcat though, due to the oval shape in the front of the cockpit, which isn't found on the F15.
Attached are images of the F14 and F15.
Image 1: F14, Note the oval shape in the front of the pexiglass attached to the cockpit. It is also found on the image provided.
Image 2: F15, Note the lack of a oval like shape in the front of the pexiglass attached to the cockpit. It takes more of a appearance of a circle-ish trapezoid.
Which of these transportation scenarios is not related to the impacts of globalization?
Consumers use the Internet to search for products and services; this causes an increase in orders from Asian countries through American “middle men” companies which then must invest in new shipping options from China.
Consumers demand that furniture be made locally, causing a drop in the use of carrier services.
Shipping for international orders drops based on increased use and the ability to bundle international orders.
Some pet foods produced internationally can only be shipped via water transportation; this eliminates small, local suppliers from accessing the market.
Answer:
The scenario where consumers demand that furniture be made locally, causing a drop in the use of carrier services, is not related to the impacts of globalization. This scenario relates to the localization of production and consumption, which is a trend that is sometimes in opposition to the globalizing trend of outsourcing production to other countries to take advantage of lower labor costs. The other scenarios are related to the impacts of globalization on transportation, including the increased use of shipping options from China, the increased use of carrier services due to internet orders, and the exclusion of small, local suppliers from the market due to the need for water transportation.