What does it mean when we say our sense of motion depends on our frame of reference? Include the phrases “fixed frame” and “moving frame” in your answer.

Answers

Answer 1

frame of reference that is not inertial. A non-inertial frame is now defined as a frame that accelerates relative to the underlying inertial reference frame. Newton's law won't be valid.

How does the framework function?

Performance could change depending on the lighting. The Frame automatically modifies the Plasma tvs brightness and contrasting settings after analyzing the lighting conditions in the room and the light level of your content.

What distinguishes a system from a frame?

the hard architecture (bones and condyle) that serves as an animal's body's framework. skeletal system, skeleton, and systema skeletale. system: a collection of organs or bodily parts that function or are anatomically related; "the body contains a system for organs for digestion."

To know more about frame visit:

https://brainly.com/question/9708057

#SPJ1


Related Questions

The melting of methane hydrates on the seafloor can lead to a sharp rise in global temperatures because methane is a powerful greenhouse gas (true or false)

Answers

The melting of methane hydrates on the seafloor can lead to a sharp rise in global temperatures because methane is a powerful greenhouse gas. The statement is true.

Methane is a powerful greenhouse gas, with a global warming potential that is estimated to be about 25 times greater than that of carbon dioxide over a 100-year time horizon. Methane hydrates are solid, crystalline compounds that contain a large amount of methane gas trapped within water molecules. These hydrates are stable under certain temperature and pressure conditions, but if they become destabilized, they can release large amounts of methane into the atmosphere.

The melting of methane hydrates on the seafloor is a concern because it has the potential to release vast amounts of methane into the atmosphere, which could significantly contribute to global warming and climate change. This process could be triggered by rising ocean temperatures, changes in ocean currents, or other factors that alter the stability of the hydrates. While the exact extent and impact of this phenomenon are still uncertain, it is an area of active research and concern among climate scientists.

To learn more about temperature, refer:-

https://brainly.com/question/2662380

#SPJ11

what is the weight of a cubic meter of cork? could you lift it? (use 400 kg/m^3 for the density of cork.)

Answers

To lift this weight, you would need a force greater than or equal to 3,920 N (assuming you are lifting it vertically).

weight = [tex]1 m^3 \times 400 kg/m^3 \times9.8 m/s^2[/tex]

weight = 3,920 N

Force is a physical quantity that describes the interaction between objects or systems. The SI unit of force is the Newton (N), which is defined as the amount of force required to accelerate a one kilogram mass at a rate of one meter per second squared.

Force is also responsible for deformations in solid objects, such as stretching or compressing a spring. Nuclear forces are responsible for the interactions between subatomic particles, and frictional forces are the forces that resist motion when two surfaces come into contact. Gravitational force is the force that pulls objects towards each other due to their masses. Electromagnetic force is responsible for the interactions between charged particles, such as in electricity or magnetism.

To learn more about Force visit here:

brainly.com/question/24115409

#SPJ4

what does the technique of interferometry allow?what does the technique of interferometry allow?it allows two or more telescopes to obtain a total light-collecting area much larger than the total light-collecting area of the individual telescopes.it allows us to determine the chemical composition of stars.it allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.it allows the same telescope to make images with both radio waves and visible light.it allows astronomers to make astronomical observations without interference from light pollution.

Answers

The technique of interferometry allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.

This is achieved by combining the signals received by the telescopes to create a single image with a higher resolution. Interferometry is especially useful for studying objects with small angular sizes, such as stars and planets.

Additionally, interferometry allows astronomers to make astronomical observations without interference from light pollution, as it can separate the signals from the object being observed from the background light.

However, interferometry does not directly determine the chemical composition of stars, although it can provide information about their temperature and other physical properties.

Learn more about interferometry:

https://brainly.com/question/30054443

#SPJ11

help me please oml 2 one

Answers

Color: Both the bromine gas and steak have a brownish color.

What is bromine gas?

Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.

Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.

To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1

a hollow cylindrical copper (density 8.96 g/cm3) pipe is 0.71 m long and has an outside diameter of 3.50 cm and an inside diameter of 2.50 cm. the mass of this pipe is closest to

Answers

Having an exterior diameter of 3.50 cm and an inside diameter of 2.50 cm, a hollow cylindrical copper pipe measures 0.71 m in length. The mass of the copper pipe is closest to 6.72 kg.

To find the mass of the copper pipe, we need to first calculate its volume, which can be obtained by subtracting the volume of the hollow center from the volume of the outer cylinder.

The outer cylinder's volume can be calculated as:

[tex]$V_{outer} = \pi r_{outer}^2h$[/tex]

where r_outer is the outer radius, h is the height, and π is the mathematical constant pi.

Similarly, the inner cylinder's volume can be calculated as:

[tex]$V_{inner} = \pi r_{inner}^2h$[/tex]

where r_inner is the inner radius.

Therefore, the volume of the hollow center can be found by subtracting V_inner from V_outer:

V_hollow = V_outer - V_inner

[tex]$V_{outer} = \pi(r_{outer}^2 - r_{inner}^2)h$[/tex]

Substituting the given values, we get:

[tex]$V_{hollow} = \pi(0.0175^2 - 0.0125^2) \times 0.71$[/tex]

= 0.00074962 m^3

The mass of the copper pipe can be found by multiplying its volume by its density:

mass = density × volume

[tex]$V = 8.96 \text{ g/cm}^3 \times 749.62 \text{ cm}^3$[/tex]

= 6716.23 g

≈ 6.72 kg (rounded to two decimal places)

To learn more about copper pipe

https://brainly.com/question/27813166

#SPJ4

when does a star become a main-sequence star? when the rate of hydrogen fusion within the star's core is high enough to maintain gravitational equilibrium when hydrogen fusion is occurring throughout a star's interior when the protostar assembles from a molecular cloud when a star becomes luminous enough to emit thermal radiation the instant when hydrogen fusion first begins in the star's core

Answers

Answer: hope it helps

Explanation:

A protostar becomes a main sequence star when its core temperature exceeds 10 million K. This is the temperature needed for hydrogen fusion to operate efficiently.

Green laser pointers emit light with a wavelength of 532 nm. Do research on the type of laser used in this type of pointer and describe its operation. Indicate whether the laser is pulsed or continuous.

Answers

Pulsed lasers are used in specific applications where short bursts of laser light are needed, such as in laser ranging, lidar, or certain medical procedures.

What is Wavelength?

Wavelength is a term used in physics to describe the distance between two consecutive points of a wave that are in phase, or the distance over which a wave completes one cycle. It is commonly denoted by the Greek letter lambda (λ) and is usually measured in units such as meters (m), nanometers (nm), or angstroms (Å).

Green laser pointers typically use a type of laser known as a diode-pumped solid-state (DPSS) laser to generate laser light at a wavelength of 532 nm, which corresponds to green light in the visible spectrum. DPSS lasers are a type of laser that uses a solid-state crystal or material as the gain medium, which is pumped by a diode laser to achieve laser emission.

Learn more about Wavelength from the given link

https://brainly.com/question/10750459

#SPJ1

a circuit breaker is rated for a current of 15 a rms at a voltage of 240 v rms. (a) what is the largest value of imax that the breaker can carry?

Answers

The largest value of I_max that the breaker can carry is approximately 21.21 A.

Given a circuit breaker rated for 15 A RMS at 240 V RMS, we want to find the largest value of Imax (maximum current) that the breaker can carry. To do this, we'll use the following formula:

I_max = √2 * I_RMS

Where I_RMS is the rated current in RMS, which is 15 A in this case.

Substitute the value of I_RMS into the formula:
Imax = √2 * 15 A

Calculate the value of Imax:
Imax ≈ 21.21 A

Therefore approximately 21.21 A is the largest value of Imax that the breaker can carry.

More on circuit breaker: https://brainly.com/question/29480920

#SPJ11

thermal expansion may cause an equipment or piping system overpressure when the liquid is blocked-in

Answers

Thermal expansion is a phenomenon in which materials expand when they are heated and contract when they are cooled. This can be a problem in industrial equipment or piping systems that contain liquids, especially when the liquid is blocked-in and cannot move freely.

When the temperature of the liquid increases due to an external heat source, such as a nearby furnace or the sun, the liquid will expand and cause an increase in pressure within the equipment or piping system. This increase in pressure can lead to overpressure, which can be dangerous and can potentially cause equipment failure or system rupture.

It is important to account for thermal expansion when designing industrial equipment and piping systems to ensure that they can safely withstand the changes in pressure caused by temperature fluctuations.

Learn more about equipment ,

https://brainly.com/question/30230359

#SPJ4

A rock thrown horizontally from the roof edge of a 12.4 m-high building hits the ground below, a horizontal distance of 17.8 m from the building. What is the overall speed of the rock when it hits the ground?

Answers

The overall speed of the rock when it hits the ground is 24.4 m/s.

We can solve this problem using kinematic equations of motion. Since the rock is thrown horizontally, its initial vertical velocity is zero.

Let's use the following kinematic equation to find the final velocity of the rock (v):

v² = u² + 2as

where u is the initial velocity (in this case, u = 0), a is the acceleration due to gravity (-9.81 m/s²), and s is the vertical distance the rock falls (12.4 m). Solving for v, we get:

v = sqrt(2as) = sqrt(2 x (-9.81 m/s²) x 12.4 m) = 17.26 m/s

Now that we have found the final vertical velocity, we can use it to find the time it takes for the rock to fall to the ground.

The time (t) can be found using the following kinematic equation:

s = ut + (1/2)at²

where s is the horizontal distance the rock travels (17.8 m), u is the horizontal velocity of the rock (which is constant), and a is the horizontal acceleration (which is zero). Since the initial horizontal velocity is equal to the final horizontal velocity, we can use the following equation to find u:

v = u

u = v = 17.26 m/s

Now we can plug in the known values to find t:

17.8 m = 17.26 m/s x t

t = 1.03 s

Finally, we can use the horizontal distance and time to find the horizontal velocity (v_h) using the equation:

v_h = s/t = 17.8 m / 1.03 s = 17.28 m/s

Therefore, the overall speed of the rock when it hits the ground is the vector sum of the horizontal and vertical velocities:

v_overall = sqrt(v_h² + v²) = sqrt((17.28 m/s)² + (17.26 m/s)²) = 24.4 m/s

So the overall speed of the rock when it hits the ground is 24.4 m/s.

To know more about vertical velocity, visit:

https://brainly.com/question/11679227

#SPJ1

catching a wave, a 73.2-kg surfer starts with a speed of 1.44 m/s, drops through a height of 1.84 m, and ends with a speed of 8.89 m/s. how much nonconservative work was done on the surfer?

Answers

The nonconservative work done on the surfer is 2845.5 J.

We can use the work-energy theorem to solve this problem. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. In this case, we can calculate the initial and final kinetic energies of the surfer and find the difference, which will give us the net work done.

The initial kinetic energy of the surfer is:

[tex]K_i = (1/2) * m * v_i^2[/tex]

[tex]K_i = (1/2) * 73.2 kg * (1.44 m/s)^2[/tex]

K_i = 75.7 J

The final kinetic energy of the surfer is:

[tex]K_f = (1/2) * m * v_f^2[/tex]

[tex]K_f = (1/2) * 73.2 kg * (8.89 m/s)^2[/tex]

K_f = 2921.2 J

The change in kinetic energy is:

ΔK = K_f - K_i

ΔK = 2921.2 J - 75.7 J

ΔK = 2845.5 J

According to the work-energy theorem, this change in kinetic energy must be equal to the net work done on the surfer. Therefore, the nonconservative work done on the surfer is:

W_nc = ΔK

W_nc = 2845.5 J

So, the nonconservative work done on the surfer is 2845.5 J.

Learn more about   nonconservative work

https://brainly.com/question/28588859

#SPJ4

if a red giant appears the same brightness as a red main sequence star, which one is further away

Answers

If a red giant appears the same brightness as a red main sequence star, it is most likely that the red giant is further away.

Here's a step-by-step explanation:

1) Red giants and red main sequence stars are both types of stars that are similar in color, but they have different sizes and luminosities.

2) Red giants are much larger and more luminous than red main sequence stars. They are formed when a star like the sun runs out of fuel and begins to expand and cool.

3)Red main sequence stars, on the other hand, are smaller and less luminous than red giants. They are stars that are still burning hydrogen fuel in their cores.

4) The apparent brightness of a star depends on both its intrinsic luminosity and its distance from Earth. The farther away a star is, the dimmer it appears to us on Earth.

5) If a red giant appears the same brightness as a red main sequence star, this means that the red giant must be much farther away from Earth than the red main sequence star.

6) This is because the red giant is intrinsically much more luminous than the red main sequence star. If both stars were at the same distance from Earth, the red giant would appear much brighter than the red main sequence star.

7) However, since the red giant appears the same brightness as the red main sequence star, this means that the red giant must be much farther away from Earth and therefore appears dimmer.

Overall, by comparing the apparent brightness of a red giant and a red main sequence star, we can determine which star is farther away.

If the red giant appears the same brightness as the red main sequence star, then the red giant is likely to be much farther away.

To know more about fusion reactions :

https://brainly.com/question/4837991

#SPJ11

if the wavelength of a wave in a particular medium is tripled, what will happen to the frequency of the wave?

Answers

Answer:

V = λ * ν       speed of wave in medium

We know the speed of a particular wave in a medium is constant.

ν = V / λ

If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.

ν' = ν / 3

at 2.1 km from the transmitter, the peak electric field of a radio wave is 350 mv/m . what is the peak electric field 10 km from the transmitter?

Answers

The peak electric field 10 km from the transmitter is approximately 15.435 mV/m.

To find the peak electric field 10 km from the transmitter, we can use the inverse square law.

This law states that the intensity of a wave (such as the electric field in this case) is inversely proportional to the square of the distance from the source.

Here's a step-by-step explanation:

1. Note the initial distance (d1) and electric field (E1):

d1 = 2.1 km, E1 = 350 mV/m.


2. Convert d1 to meters:

d1 = 2100 m.


3. Note the final distance (d2):

d2 = 10 km.


4. Convert d2 to meters:

d2 = 10,000 m.


5. Use the inverse square law formula:

E2 = E1 * (d1²) / (d2²).


6. Plug in the values:

E2 = 350 * (2100²) / (10,000²).


7. Calculate E2:

E2 ≈ 15.435 mV/m.

Learn more about electric field:

https://brainly.com/question/14372859

#SPJ11

Power supplies are rated for efficiency based on. drawn to supply sufficient power to the PC. a. volts b. watts c. amperes d. ohms. Study These Flashcards.

Answers

B. Power supplies are rated for efficiency based on watts. The efficiency of a power supply is determined by the ratio of its output power (in watts) to its input power (also in watts).

The lesser the  effectiveness, the  lower power is wasted as heat and the lesser the power given to the computer's  factors.   In addition to  effectiveness, power  inventories are rated for maximum affair power, which is generally expressed in watts. This standing represents the loftiest  quantum of power that the power  force can deliver to the computer's  factors.  

Other conditions,  similar as voltage and amperage conditions for their different affair connections, may be assigned to power  inventories. The maximum voltage and current that the power  force can produce on each connection are indicated by these conditions. Ohms, on the other hand, are a resistance unit that's infrequently used to grade power  force.

Learn more about power at

https://brainly.com/question/30562600

#SPJ4

An astronaut of mass 75 kg is floating in space holding a 20 kg fire extinguisher. If she throws the extinguisher forward at a velocity of 3.5 m/s, what will be her resulting velocity?

Answers

Momentum is defined as mass multiplied by velocity, so the total momentum before the extinguisher is thrown is 70 kg*m/s.

What is Velocity?

Velocity is a vector quantity that measures the rate of change of an object's position. It is determined by the displacement of an object over a given period of time, and is usually expressed in terms of distance over time.

The astronaut's resulting velocity will be the same as the fire extinguisher's velocity, 3.5 m/s.
This is because the astronaut and extinguisher have the same mass and momentum must be conserved.
Momentum is defined as mass multiplied by velocity, so the total momentum before the extinguisher is thrown is 75 kg * 0 m/s + 20 kg * 3.5 m/s
= 70 kg*m/s.

To learn more about Velocity

https://brainly.com/question/626479

#SPJ1

What happens when thermal energy is applied to a substance q

Answers

When thermal energy is applied to a substance, the particles in the substance start to vibrate more rapidly, and the average kinetic energy of the particles increases.

What happens when thermal energy is applies to a substance

As a result, the temperature of the substance increases. The amount of thermal energy required to increase the temperature of the substance by a certain amount is called the specific heat capacity of the substance.

The way the substance responds to the applied thermal energy also depends on its physical properties, such as its mass, density, and thermal conductivity. For example, a substance with a high thermal conductivity will transfer heat more rapidly to its surroundings, while a substance with a low thermal conductivity will retain heat more effectively.

If the applied thermal energy is sufficient, the substance may undergo a phase change, such as melting or boiling, as the increased kinetic energy overcomes the intermolecular forces holding the particles together.  

Learn more about thermal energy  at

https://brainly.com/question/19666326

#SPJ1

a pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?

Answers

The option A is  best representation of the path that the ball would take after the string breaks.

When the string of a pendulum breaks, the ball's path will follow the laws of motion, specifically the law of conservation of energy. As the ball was halfway to its highest position, it had a certain amount of potential energy.

When the string broke, this potential energy would convert to kinetic energy, causing the ball to move in a straight line tangent to the point where the string broke.

Therefore, the path that the ball would take after the string breaks would be a straight line away from the pivot point of the pendulum, as shown in option A. The other paths shown do not follow the laws of motion and do not account for the conservation of energy. Option (A) is the correct answer.

To learn more about : string

https://brainly.com/question/24994188

#SPJ11

Note the full question is

A pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?

A) A

B) B

C) C

D) D

E) E

. for schrodinger's equation of the h2 molecule, the kinetic energy has contributions from a. electrons only b. nuclei only c. both electrons and nuclei d. only one electron and one nucleus

Answers

The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C.

The kinetic energy term in Schrödinger's equation for the H2 molecule refers to the energy involved in the motion of the particles. The H2 molecule comprises two hydrogen nuclei and two electrons, therefore the electrons and the nuclei both contribute to the kinetic energy.

The nuclei contribute to the kinetic energy by their mobility, whereas the electrons do so through their wave-like behaviour. The H2 molecule's kinetic energy term in Schrödinger's equation includes contributions from both electrons and nuclei, making option C the right response.

Learn more about kinetic energy:

https://brainly.com/question/30285686

#SPJ4

The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C

explanation - For Schrödinger's equation of the H2 molecule, the kinetic energy has contributions from both electrons and nuclei. This is because the kinetic energy term in the equation accounts for the motion of all particles in the system, which in this case includes both the electrons and nuclei of the H2 molecule. Therefore, options a, b, and d are incorrect.

To know more about the schrodinger equation, click on this -

brainly.com/question/31441754

#SPJ11

if interstellar dust makes an rr lyrae variable star look 5 magnitudes fainter than the star should, by how much will you over- or underestimate its distance?

Answers

The distance to the RR Lyrae variable star will be underestimated by a factor of 10 due to the effect of interstellar dust.

The distance to an astronomical object can be determined using the inverse square law, which states that the apparent brightness of an object decreases as the square of the distance increases.

The apparent magnitude of an object is a measure of its brightness as seen from Earth. The lower the magnitude, the brighter the object.

If interstellar dust makes an RR Lyrae variable star look 5 magnitudes fainter than it should, then the apparent magnitude of the star as observed from Earth is 5 magnitudes greater than its true apparent magnitude.

Using the inverse square law, we can write:

Apparent brightness ~ 1 / (distance[tex])^2[/tex]

If the apparent brightness is 5 magnitudes fainter than it should be, we can express the distance to the star as:

distance = sqrt(100^(0.4 * 5)) x true distance

where 0.4 is the conversion factor from magnitudes to brightness ratios, and 100 is the ratio of the brightness of the star as observed from Earth to its true brightness.

Simplifying this expression, we get:

distance = 100^(0.5) x true distance

distance = 10 x true distance

Therefore, the distance to the RR Lyrae variable star will be underestimated by a factor of 10 due to the effect of interstellar dust.

Learn more about  interstellar dust.

https://brainly.com/question/13034266

#SPJ4

in an rc circuit what teh range of c needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on ?

Answers

The range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.

To calculate the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on in an RC circuit, we can use the following formula:

Vc(t) = Vmax * (1 - e^(-t/RC))

where Vc(t) is the voltage across the capacitor at time t, Vmax is the maximum voltage of the source, e is the mathematical constant approximately equal to 2.718, R is the resistance in ohms, C is the capacitance in farads, and t is the time in seconds.

When the capacitor is 99.3% charged, the voltage across it is 0.993 * Vmax. Substituting this value into the formula and solving for C, we get:

C >= t / (R * ln(1 / (1 - 0.993)))

C >= 10 ms / (R * ln(1 / 0.007))

C >= 56.3 * R

Therefore, the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.

Know more about  RC circuit   here:

https://brainly.com/question/2741777

#SPJ11

The majority of Venus's surface is:
A. volcanic plains with flowing lava.
B large, flat mesas with tiny valleys.
C. thick, soupy clouds of hydrogen.
D. frozen dunes of dust and sand.​

Answers

Answer:

C.

Explanation:

When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.

A planet has mass M = 8.00 × 1023 kg. At what distance will the centripetal acceleration of an orbiting space station be equal to the gravitational acceleration on Earth’s surface? (G = 6.67 × 10–11 m3·kg–1·s–1)answer is 2.33 x10^6 m. Can someone show the work on how to get this answer?

Answers

To find the distance at which the centripetal acceleration of an orbiting space station around a planet is equal to Earth's gravitational acceleration, we need to set up an equation involving the planet's mass (M), gravitational constant (G), and Earth's gravitational acceleration (g).

Given:
M = 8.00 × 10²³ kg
G = 6.67 × 10^(-11) m³·kg^(-1)·s^(-1)
g = 9.81 m/s² (Earth's gravitational acceleration)

Centripetal acceleration (a_c) is given by the formula:

a_c = (G * M) / r²

where r is the distance from the planet's center.

We want the centripetal acceleration to be equal to Earth's gravitational acceleration, so we can set them equal:

g = (G * M) / r²

Now, we need to solve for r:

r² = (G * M) / g

r² = (6.67 × 10^(-11) m³·kg^(-1)·s^(-1) * 8.00 × 10²³ kg) / 9.81 m/s²

r² ≈ 5.42 × 10¹² m²

Now, take the square root of both sides to find r:

r ≈ 2.33 × 10^6 m

So, at a distance of 2.33 x 10^6 meters from the planet's center, the centripetal acceleration of an orbiting space station will be equal to the gravitational acceleration on Earth's surface.

To learn more about Centripetal Acceleration and Gravitational Acceleration. Please Visit:

https://brainly.com/question/26143683

#SPJ11

The following formula can be used to determine the distance from the planet's centre at which the centripetal acceleration of an orbiting space station equals the gravitational acceleration on Earth's surface:

[tex]r = (GM/g)^(1/3)[/tex]

where the gravitational constant, G, equals 6.67 1011 m3 kg-1 s-1.

M is equal to 8.00 1023 kg (the planet's mass).

Gravitational acceleration on Earth's surface is equal to 9.81 m/s2.

When we change the values, we obtain:

[tex]r = [(6.67 × 10^-11) × (8.00 × 10^23) / 9.81]^(1/3)[/tex]

[tex]r = 2.33 × 10^6 m[/tex]

Therefore, 2.33 x 106 m is the necessary distance.

F = G (m1m2 / r2), where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them, can be used to express the gravitational force between two objects. When a planet and a satellite are involved, the centripetal force that holds the satellite in orbit around the planet is produced by the gravitational force. As a result, we may compare the centripetal force to gravity and find r. This results in the formula above, which we can use to calculate the necessary distance.

learn more about gravitational acceleration here:

https://brainly.com/question/30429836

#SPJ11

question 34 pts how do ambient sounds differ from sound effects?how are foley sounds different from sound effects?

Answers

The differences between ambient sounds, sound effects, and Foley sounds.

Ambient sounds, also known as background sounds or atmospheric sounds, are the continuous, subtle noises that help create a sense of atmosphere or location in a scene. They differ from sound effects in that sound effects are distinct, purposeful sounds added to emphasize specific actions or events in a scene.

Foley sounds, on the other hand, are a type of sound effect created manually by a Foley artist to match and enhance the actions happening on-screen. They are different from regular sound effects because they are typically recorded live in a studio using various objects and materials to create realistic, synchronized sounds for actions such as footsteps, clothing rustles, and object handling.

In summary:

1. Ambient sounds create a sense of atmosphere or location and are continuous and subtle.
2. Sound effects are distinct, purposeful sounds added to emphasize specific actions or events.
3. Foley sounds are a type of sound effect created manually by a Foley artist to match on-screen actions.

To know more about ambient sounds, sound effects, and Foley sounds:

https://brainly.com/question/16519187

#SPJ11

Please help I need to answer fast the fate of my graduation depends on it.

Answers

First, we need to find the total mass of the system by adding the masses of the two objects: m_total = m1   m2 = 50.0 kg   75.0 kg = 125.0 kg  Next, we can plug in the given force and mass values into the equation: F = ma 40.0 N = 125.0 kg * a  Solving for a: a = 40.0 N

125.0 kg * a

Solving for a:

a = 40.0 N / 125.0 kg

a = 0.32 m/s^2

Therefore, the acceleration of the system is 0.32 m/s^2.

is it ok to keep my ac running and just stop the car's engine to save gas and keep cool while waiting for my husband?

Answers

It is not recommended to keep the AC running while the engine is off, as this can drain the car battery and may lead to mechanical issues in the long run. It is better to turn off the AC and open the windows or step out of the car to cool off while waiting for your husband.

Idling the engine for extended periods of time can also waste gas and contribute to air pollution. When you stop your car's engine, the air conditioning (AC) system will also stop working, as it requires the engine to be running to function properly. To save gas and keep cool while waiting for your husband, you may consider:

1. Turn off your car's engine to save gas.
2. Open the windows slightly to allow for airflow.
3. Use a portable battery-operated fan to keep yourself cool.
4. Park your car in a shaded area, if possible, to reduce heat buildup inside the vehicle.
5. Wear light, breathable clothing to stay comfortable in warmer temperatures.

Remember that running the AC without the engine is not possible, so it's essential to find alternative ways to stay cool while conserving fuel.

More on car engine: https://brainly.com/question/29980491

#SPJ11

A bow is drawn so that it has 40 J of potential energy. When fired, the arrow will have a kinetic energy of: Select one: O a. 80) o b. 20) O 0.60) O d. 40)

Answers

When a bow is drawn and has 40 J of potential energy, the arrow's kinetic energy when fired will be:

Your answer: d. 40 J

Explanation:

Potential energy is the energy that an object possesses due to its position, configuration, or state of being. It is stored energy that has the potential to do work in the future. The amount of potential energy that an object has depends on its position or configuration relative to other objects or systems. For example, a bow that is pulled back has potential energy that can be released as kinetic energy when it is released.

Kinetic energy, on the other hand, is the energy that an object possesses due to its motion. It is the energy that an object possesses because it is in motion and is able to do work by causing a change in another object's motion or position. The amount of kinetic energy that an object has depends on its mass and its velocity. For example, a moving car has kinetic energy that can be transferred to another object if it collides with it.

When the bow is drawn, it stores potential energy. When fired, this potential energy is converted into kinetic energy for the arrow. In an ideal situation with no energy loss, the arrow's kinetic energy will be equal to the bow's potential energy. Therefore, the arrow will have a kinetic energy of 40 J.

To learn more about Potential Energy and Kinetic Energy. Please Visit:

https://brainly.com/question/30176483

#SPJ11

Calculating Average Speed
If you know the total distance an object travels over a certain period of time, you can
calculate the average speed of the object.
To do so, you use the formula ____________________________________________.

Answers

The formula for speed is S=d/t

Explanation: Speed equals distance divided by time.

5. Explain the law of conservation of energy using a relevant example from every day life.​

Answers

The law of conservation of energy states that energy is neither created nor destroyed but is transformed from one form to another.

What is law of conservation of energy?

The law of conservation of energy is the law that states that energy is neither created nor destroyed but is transformed from one form to another.

Examples of activities of everyday life that shows the conservation of energy include the following:

For loudspeaker, electrical energy is converted into sound energy.

For a microphone, sound energy is converted into electrical energy.

For a generator, mechanical energy is converted into electrical energy.

When fuels are burnt, chemical energy is converted into heat and light energy

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

An example of the law of conservation of energy is a roller coaster.

What is the law of conservation of energy?

The law of conservation of energy states that energy cannot be created or destroyed, only transferred or transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time.

A roller coaster car gains kinetic energy as it moves down the track, but it also loses potential energy. At the bottom of the track, the car has the most kinetic energy and the least potential energy, while at the top of the track, it has the most potential energy and the least kinetic energy. However, the total amount of energy in the system remains constant.

Learn about law of conservation of energy here https://brainly.com/question/166559

#SPJ1

The surface of which jovian moon most resembles the pack ice of the Arctic Ocean? A) Amalthea B) Io C) Europa D) Ganymede E) Callisto.

Answers

C option is correct one
Other Questions
Given this snippet of code, what is the value of x after executing the last statement? int x = 10, *y; y = &x; y = y + 1; *y = 100; How were enslaved people transported to be sold in the markets at Pensacola and New Orleans? From which states where they transported? how long will it take for vermont to double its economy if it maintains this growth rate? give your answer to two decimals. PLEASE HELP DUE TODAY steve's tentative minimum tax (tmt) for 2022 is $244,200. note: leave no answer blank. enter zero if applicable. required: what is his amt if his regular tax is $227,700? what is his amt if his regular tax is $265,500? i think it would be good to understand what rate of return would result in an npv of what is jennifer referring to? McMillin Industries is currently 100% equity financed, has 25,000 shares outstanding at a price of $30 a share, and produces an annual EBIT of $150,000. The firm is considering issuing $300,000 of debt and repurchasing shares. The cost of debt is 12%. Ignore taxes. By how much will EPS change if the company issues the debt and EBIT remains constant?A) $.72 B) $.76 C) $1.72 D) $1.60 E) $1.54 The sternoclavicular joints are best demonstrated with the patient PA anda.in a slight oblique position, affected side adjacent (closest) to the IRb.in a slight oblique position, affected side away from the IRc.erect and weight bearingd.erect with and without weights Suppose Omni Consumer Products's CFO is evaluating a project with the following cash inflows. She does not know the project's initial cost; however, she does know that the project's regular payback period is 2.5 years. If the project's weighted average cost of capital (WACC) is 796, what is its NPV? Year Cash Flow Year 1 $275,000 Year 2 $475,000 Year 3 $500,000 Year 4 $450,000 O $486,847 O $359,843 O $423,345 O $465,680 Which of the following statements indicate a disadvantage of using the discounted payback period for capital budgeting decisions? Check all that apply. The discounted payback period does not take the project's entire life into account. The discounted payback period does not take the time value of money into account. The discounted payback period is calculated using net income instead of cash flows. Growth stocks consistently outperform value stocks. Select one: O True O False The n-period discount model is also known as the Gordon-growth model. Select one: O True O False Tracking error is defined as the degree to which the portfolio's returns deviate from those of the actual index. Select one: O True O False A company reports the following information for its first year of operations: Units produced this year 650 units Units sold this year 500 units Direct materials $750 per unit Direct labor $1,000 per unit Variable overhead ? in total Fixed overhead $308,750 in total If the company's cost per unit of finished goods using variable costing is $2,375, what is total variable overhead? $237,500 $75,000 $312,500 $406,250 $97,500 someone help please its a sience testtt 1) Why is a change in required yield for a preferred stock likely to have a greater impact on price than a change in required yield for bonds?2) These valuation models are based on investors required rates of return and their reflection in the prices of the assets. Does the change in price always occur according to the model? What is eutectic temperature How large is an impact crater compared to the size of the impactor?A) 100 times largerB) 1,000 times largerC) 10 times largerD) 10-20 percent largerE) the same size Studying the make up of our individual bacteria communities will help scientist get a better idea of which bacteria help human body based on the context of the sentence what does make up mean design.color.consistency.goal. If you have questions regarding the list of required Data elements for prescriptions, you should refer to the ___ on ___ business firms that compete with each other not only in one business unit, but in a number of related business units are said to be engaging in the profit p (in dollars) generated by selling x units of a certain commodity is given by the function p ( x ) = - 1500 + 12 x - 0.004 x ^ 2 What is the maximum profit, and how many units must be sold to generate it? Question 20 (3.3 points) Saved Robert constantly makes money on his stock investments by analyzing financial statements. This piece of evidence does not violate market efficiency. A) The semistrong-fo rm B) The weak-form C) All forms of D) The strong form