What do we call the repeating units of a larger molecule?

Answer:

When the base neutralizes the acid, the number of moles of H+ = the number of moles of OH-. Therefore, the number of moles of H+ = 0.0125 moles. Every mole of HCl will produce one mole of H+; therefore, the number of moles of HCl = number of moles of H+. The concentration of the HCl is 0.25 M

Answer:

James Chadwick conducted an experiment where he assailed the element Beryllium with alpha particles that came from the radioactive decay of Polunium. The experiment results showed highly penetrating radiation emitted from the Beryllium. In this, Chadwick proposed that radiation consisted of uncharged particles, which were later founded as neutrons.

Answer:

Use the Rydberg Equation 1/λ = R(1/n²(final) - 1/n²(initial) where R = 109,678 cm⁻¹. Substitute initial orbital number and final orbital number and solve for wavelength (λ).

Explanation:

Example:

Assume an electron transition from n = 5 to n = 2.

1/λ = 109,678cm⁻¹(1/2² - 1/5²) = 109,678(0.25 - 0.04)cm⁻¹ = 23,032cm⁻¹

λ = 1/23,032cm⁻¹ = 4.34 x 10⁻⁵cm x 10⁻²m/cm x 10⁹nm/m = 434nm

Answer -ˋˏ ༻༺ ˎˊ-

A common use for gravity filtration is for separating anhydrous magnesium sulfate (MgSO4) from an organic solution that it has dried (Figure 1.68b). Anhydrous magnesium sulfate is powdery, and with swirling in an organic solvent creates a fine dispersal of particles like a snow globe.

Answer:

Every amino acid also has another atom or group of atoms bonded to the central atom known as the R group. This R group, or side chain, gives each amino acid proteins specific characteristics, including size, polarity, and pH.

Explanation:

The R group is another atom or group of atoms that is attached to the core atom in every amino acid. This R group, or side chain, provides each amino acid protein with unique properties such as size, polarity, and pH.

Amino acids are chemical molecules that are used to construct proteins. Proteins are vital macromolecules in living organisms, serving a variety of functions including enzymatic catalysis, structural support, transportation, immunological response, and others. A polypeptide chain is formed by linking amino acids in a precise sequence, which subsequently folds into a three-dimensional structure to make a functioning protein.

To know more about amino acid, here:

https://brainly.com/question/31872499

#SPJ3

no I will not please put you because that's the god of the Bible

Metals are good conductors of heat and electricity, and are malleable (they can be hammered into sheets) and ductile (they can be drawn into wire).

Nonmetals are (usually) poor conductors of heat and electricity, and are not malleable or ductile; many of the elemental nonmetals are gases at room temperature, while others are liquids and others are solids. 

The metalloids are intermediate in their properties.  In their physical properties, they are more like the nonmetals, but under certain circumstances, several of them can be made to conduct electricity.

hope this answer helped u, if u can pls mark me as the brainliest. :)

Answer: 1 mole

Explanation:

One mole reacts because there is a 1:1 ratio between the potassium and water at the beginning of the equation. 2K+2H2O has a 1 to 1 ratio. If one potassium reacts there is one h2o that also reacts.

Taking into account the reaction stoichiometry, if one mole of potassium reacts, 1 mole of water are consumed.

In first place, the balanced reaction is:

2 K + 2 H₂O → 2 KOH + H₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The amount of water consumed is calculated from the following rule of three: if by stoichiometry 2 moles of K react with 2 moles of H₂O, 1 mole of K react with how many moles of H₂O?

[tex]amount of moles of H_{2} O=\frac{1 mole of Kx2 moles ofH_{2} O }{2 moles of K}[/tex]

amount of moles of H₂O= 1 mole

In summary, if one mole of potassium reacts, 1 mole of water are consumed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

Answer:

B

Explanation:

Option B best describes covalent bonds.

Answer:

c

Explanation:

allow plants to absorb water and nutrients from the soil

Experiment: Does it Dissolve?

Materials Needed:

Step 1: Form a question before starting the experiment.

Step 2: Make a hypothesis for each substance.

Step 3: Scoop a teaspoon of each substance in the jars, only adding one substance per jar. Stir it up!

Step 4: Observe whether or not each substance dissolves and record the findings.

Answer:

There are 95 atoms in mercury phosphate

Explanation:

You just add the atomic number for both elements

Answer:

The dipole forces (particularly H-bonds) that keep polar solute molecules together can be replaced by polar solute-solvent interactions, so substances that are predominantly polar (like glucose) dissolve in polar solvents like water but not in nonpolar solvents like hexane (H-bonds).

Explanation:

Explanation:

A moon orbits in a roughly circular path around a planet with a mass of 8.6 x 1023 kg. The distance from the center of the moon to the center of the planet is 7.04 x 106 meters. Calculate the speed of the moon in m/s.

The main parts of the carbon cycle are photosynthesis, respiration, diffusion, absorption, fossil fuel burning, and land use.

Answer:

[tex]\boxed {\boxed {\sf 353 \ mL}}[/tex]

Explanation:

We are asked to find the volume in milliliters of a solution, given the mass of solute and molarity of the solution.

Molarity is a measure of concentration in moles per liter.

[tex]molarity = \frac {moles \ of \ solute}{liters \ of \ solution}[/tex]

We are given the mass of the solute. We must convert the mass to moles using the molar mass (the mass of 1 mole of a substance). These values are found on the Periodic Table. They are equal to the atomic masses, but the units are grams per mole instead of atomic mass units.

Look up the molar masses of the individual elements in calcium chloride.

The chemical formula, CaCl₂, has a subscript of 2. There are 2 moles of chlorine in 1 mole of calcium chloride. We must multiply chlorine's molar mass by 2 before adding calcium's molar mass.

Set up a conversion factor using the molar mass.

[tex]\frac {110.98 \ g \ CaCl_2}{1 \ mol \ CaCl_2}[/tex]

Multiply by 45.0 grams of calcium chloride.

[tex]45.0 \ g \ CaCl_2 *\frac {110.98 \ g \ CaCl_2}{1 \ mol \ CaCl_2}[/tex]

Flip the conversion factor so the units of grams of calcium chloride cancel.

[tex]45.0 \ g \ CaCl_2 *\frac{1 \ mol \ CaCl_2} {110.98 \ g \ CaCl_2}[/tex]

[tex]45.0 \ *\frac{1 \ mol \ CaCl_2} {110.98}[/tex]

[tex]\frac {45.0}{110.98} \ mol \ CaCl_2= 0.405478465 \ mol \ CaCl_2[/tex]

Now we can find the liters of solution.

[tex]molarity = \frac {moles \ of \ solute}{liters \ of \ solution}[/tex]

Substitute the values into the formula.

[tex]1.15 \ mol \ CaCl_2/L = \frac{0.405478465 \ mol \ CaCl_2}{x}[/tex]

Cross multiply.

[tex]\frac {1.15 \ mol \ CaCl_2 /L}{1}= \frac{0.405478465 \ mol \ CaCl_2}{x}[/tex]

[tex]{1.15 \ mol \ CaCl_2 /L}*x= {0.405478465 \ mol \ CaCl_2} * 1[/tex]

Divide both sides of the equation by 1.15 moles of calcium chloride to isolate the variable x.

[tex]\frac {1.15 \ mol \ CaCl_2/L *x}{1.15 \ mol \ CaCl_2 /L}= \frac{0.405478465 \ mol \ CaCl_2 * 1 }{1.15 \ mol \ CaCl_2/L }[/tex]

[tex]x=\frac{0.405478465 \ mol \ CaCl_2 * 1 }{1.15 \ mol \ CaCl_2 /L}[/tex]

The units of moles of calcium chloride cancel.

[tex]x=\frac{0.405478465 }{1.15 \ L }[/tex]

[tex]x=0.35258997 \ L[/tex]

There are 1000 milliliters in 1 liter.

[tex]\frac {1000 \ mL}{1 \ L}[/tex]

[tex]0.35258997 \ L * \frac{1000 \ mL}{ 1 \ L}[/tex]

[tex]0.35258997 * 1000 \ mL=352.58997 \ mL[/tex]

The original measurements of mass and molarity have 3 significant figures, so our answer must have the same. For the number we found, that is the ones place. The 5 in the tenth place tells us to round the 2 up to a 3.

[tex]353 \ mL[/tex]

The volume of the solution is approximately 353 milliliters.

Considering the reaction stoichiometry, the enthalpy change if enough propane was burned to give off 12 moles of carbon dioxide gas is 8228 kJ.

The balanced reaction is:

C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(l)

The heat of combustion of propane, C₃H₈, is -2057 kJ/mol. This is, 2057 kJ is released for every 1 mol C₃H₈.

So to determine the enthalpy change if enough propane was burned to emit 12 moles of carbon dioxide, you must take into account the stoichiometry of the reaction.

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 3 moles of CO₂ are produced by 1 mole of C₃H₈, 12 moles of CO₂ are produced by how many moles of C₃H₈?

[tex]amount of moles of C_{3} H_{8} =\frac{12 moles of CO_{2}x1 mole of C_{3} H_{8} }{3 moles of CO_{2}}[/tex]

amount of moles of C₃H₈= 4 moles

So to determine the enthalpy change, you can apply the following rule of three: If for each mole of C₃H₈ 2057 kJ are released, for 4 moles of C₃H₈ how much heat is released?

[tex]Heat released=\frac{4 molesx2057 kJ}{1 mole}[/tex]

Heat released= 8228 kJ

The enthalpy change if enough propane was burned to give off 12 moles of carbon dioxide gas is 8228 kJ.

Learn more:  

Answer:

Words are filled in

Eating a healthy breakfast gives your body the energy needed to help you start your day.. The girl in the photo is having cereal and orange jucie, both of which have stored chemical energy, a form of potential energy. The girls body breaks down the components of the food to access the energy in them. Later in the day, some of this energy is transformed into kinetic energy that will allow the girl to study and play sports. Some of this energy is also transformed into thermal energy that keeps her body warm.

Explanation:

Answer:

The ironization energies increase as you go across the period So the electrical conductivity of the oxides is your answer

Answer:

Explanation:

These problems are pretty easy, you just need to do to the enthalpy what is done to the equation itself. Numbers one and 3 are reversed, so they become positive values. When a coefficient changes in the equation, you multiply the enthalpy by that number. I have attached my work below. Let me know if there is any confusion left.

Hope this helped! :^)

Answer:

C

Explanation:

The azimuthal quantum number can take values from 0 to (n-1)

So in answer C n= 3, l can take values between 0

and 2.

l can't be 3.

ml can take values from -l to +l.

Hope you understood

Answer:

The answer is B

B = Petri dishes and sterile droppers

Explanation:

Answer:

3. 0.819L (819 mL)

Explanation: Before we go about solving this, we need to do some conversions prior to using the gas law, the gas law is as follows...

P(atm)*V(L)=n(mol)*r(constant)*T(in kelvin)

So here are all the conversions you need.

620 mm Hg -> 0.816 atm

1140 mL -> 1.14 L

37 C -> 310.15 K

After plugging in our new converted values, we will proceed to solve the number of moles of the gas present, our n value, so our equation will look like this...(Note: Constant r in this case is 0.08206 L*atm/K*mol)

(0.816 atm)(1.14 L) = n(0.08206)(310.15)

Solving for n we get 0.03653 moles.

Now our second part is to figure out the volume AT STP (standard temperature/pressure). In the STP conditions, your temperature defaults to 0 C (273.15 K) and 1 atm. Now there is an easier way to do this, but I'll also show the more comprehensive way. Here is the easier method...

Since 1 mole of every gas occupies 22.4 L at STP, we can simply multiply this by our number of moles. So (22.4L)(0.3653 mol) to give us 0.818272.

However, a more accurate answer can be given like this...

Plugging n back into the same equation and this time resetting pressure to 1 atm and temperature to 273.15 K and conserving our number of moles we get...

(1 atm)(v) = (0.03653 mol)(0.08206)(273.15 K)

v = (0.03653)(0.08206)(273.15)

v = 0.8188 L = 0.819 L or 819 mL

When comparing an electron's ground state with that of its excited state;

Discussion:

Entropy is simply defined as the degree of randomness otherwise termed disorderliness in a system.

Electrons in their ground state are localized and have lower energy. As such, the entropy is lower.

On the contrary; Electrons in their excited state are delocalized and have higher energy. As such, the entropy is higher.

Read more:

https://brainly.com/question/22655760

Answer:

you see le bear

you brain sends signals

your heart and lungs receive said signals

spring to action

Answer:

C. Both depend on how much matter an object has.

Explanation:

weight is the gravitational force acting on an object, so it does vary depending on gravity.

Hope it help and if it its correct please give brainliest  

Stay Safe And Heal thy

Thank You