Answers
The volumetric flow rate if friction is negligible = 0.00197 m³/sec
Given data :
P₁ = 7 atm = 709.275 kPa
P₂ = 1.5 atm = 151.988 kPa
d₁ = 0.74 cm = 0.0074 m
d₂ = 1.20 cm = 0.0120 m
h = 82 m
density of water ( p ) = 1000 kJ/m³
Estimate the volumetric flow rate
given that friction losses are negligible
V₁² - V₂² = [tex]\frac{2(P_{2} - P_{1}) }{p} + 2g(h )[/tex]
= 2( 151.988 - 709.275 ) + 2 * 9.81 * 82
= 2 ( - 557.287 ) + 1608.84
= - 1114.574 + 1608.84 = 494.266
∴ V₁² - V₂² = 494.266 ----- ( 1 )
Also given that:
volumetric flow rate ( Q ) = A₁V₁ = A₂V₂
= π / 4 ( 0.0074 )² * V₁ = π / 4 ( 0.0120 )² * V₂
= 0.000043 V₁ = 0.000113 V₂
∴ V₁ = 2.63 V₂
Back to equation ( 1 )
( 2.63 v₂ )² - V₂² = 494.266
V₂² = ( 494.266 ) / 1.63
∴ V₂ = √303.23 = 17.41 m/sec
Therefore the volumetric flow rate ( Q )
Q = A₂V₂
= π / 4 * ( 0.0120 )² * 17.41
= 0.00197 m³/sec
Learn more about volumetric flow rate : https://brainly.com/question/24356835
Related Questions
17. The shape of a river is determined by which of the following? (Choose all that
apply)
A Erosion
B. Deposition
C. Weathering
D. water speed
Answers
Answer:
Water speed Plays a key role In determining The shape of it
imagine that you have an electric car and all of the recaptured energy is put back into the battery that powers your car what speed could your car cheat from rest by using only the recaptured energy from part B
Answers
Answer:
Moving vehicles have a lot of kinetic energy, and when brakes are applied to slow a vehicle, all of that kinetic energy has to go somewhere.
Explanation:
A rifle is aimed horizontally at a target 47 m away. The bullet hits the target 2.3 cm below the aim point.
Answers
Answer:
Is your question asking for the muzzle velocity of the bullet?
Explanation:
I will assume it does
The bullet travels horizontally to the target in the same amount of time it falls 2.3 cm from vertical rest
s = ½at²
t = √(2s/g) = √(2(0.023) / 9.8) = 0.0685118...s
v = d/t = 47/0.0685118 = 686.01242...
v = 690 m/s
Identify the types of motion:-
the movement of the snail on the ground
the strings of the guitar
the whirling of stone tied with a thread
Answers
Answer:
the movement of snail on the ground is in random motion.
the strings of the guitar is in oscillatory motion.
the whirling of stone tied with a thread is in circular motion.
The degree of coldness or hotness is different for different objects. Explain with an example
Answers
Answer:
Explanation:
The degree of hotness and coldness of air is known as temperature and is measured with a thermometer in degrees-Fahrenheit or degrees-Celsius. Mercury is the only one in the liquid state at room temperature. It is used in thermometers because it has a high coefficient of expansion. The flow of heat will be always from higher to lower temperature.
PLS MARK ME WITH BRAINLEST
The force as a function of displacement of a moving object is presented by the graph. How much work is done when the object moves from 5 m to 8 m? *
Answers
Answer:
Explanation:
Work is the area under the curve between the limits
W = ½(5)(8 - 5) = 7.5 J
The work done when an object moves from 5 m to 8 m is 7.5 J.
Work done
The work done in moving an object from one point to another is equal to the product of force and displacement of the object.
W = Fs
Area under a curveThe work done on an object is equal to area under the curve
The area between point 5 m and 8 m = ¹/₂ x (8 - 5) x 5 = 7.5 J
Thus, the work done when an object moves from 5 m to 8 m is 7.5 J.
Learn more about work done here: https://brainly.com/question/8119756
state all kinds of errors
Answers
Answer:
Instrumental error
Environmental error
Observational error
Theoritical error
A block of mass m=10 kg at rest slides down a rough incline plane of θ=30° and length l=5 m. The coefficient of kinetic friction between the block and the incline is μ_k=0.1. At the bottom of the plane the block continues to slide on a frictionless surface and hits a spring with spring constant k=100 N/m.
Answers
The speed of the block at point B = 6.36 m/s
Given data :
Mass ( m ) = 10 kg
Angle of inclination ( θ ) = 30°
Length of incline = 5 m
Determine the speed of the block at a point B on the incline
First step : Calculate the work done by frictional force
given that there is no friction on the horizontal plane. Vinclined = Vhorizontal
∴ Work done by frictional force ( Wf ) = F * L cos 180
= - ( μ_k * N ) L
= - (0.1 * 84.86 ) * 5 = - 42.4 Joule
where N = mg cos 30°
= 10 * 9.8 * 0.866 = 84.86
Next step : Calculate the speed of the block at point B
applying work energy theorem
Wf = ΔK.E + ΔP.E
= ( 1/2 mv² - 0 ) + ( 0 - mgh )
∴ - 42.48 = 1/2 mv² - mgh
1/2 mv² = mgh - 42.48
= 10 * 9.8 * 5 sin 30° - 42.4
v² = 40.52
V ( speed of the block at point B ) = 6.36 m/s
Hence we can conclude that the speed of the block at point B = 6.36 m/s
Learn more about speed on frictionless surface : https://brainly.com/question/9968388
Attached below is the complete question related to your question
True or False. When Isaac’s father was a 100 God changed his name from Abram to Abraham.
Answers
PLEASE ASP HELP THIS WILL GIVE 50 POINT AND BRAINLIEST！！！！！!
In introductory physics, a typical cavendish balance for measuring the gravitational constant G use metal masses 2.39kg and 16g whose center are separated by 6.81cm calculate the gravitation force between these forces, treating each as a point mass located at the center of the sphere.
gravitational constant =6.67259 × 10⁻¹¹N·m²/kg²
Answers
Answer:
Explanation:
F = GMm/d²
F = 6.67259 x 10⁻¹¹(2.39)(0.016) / 0.0681²
F = 5.5019685...x 10⁻¹⁰ N
round as appropriate, probably no more than 3 significant figures.
Value of G seems low, but well within the 3 significant figures of the other numerals. I typically see G = 6.674 x 10⁻¹¹
In what way does Isaac represent us?
Answers
Answer:
I believe The Knowledge that we apply everyday or based on these methods and discoveries may represent us
Explanation:
a 2000kg car initially traveling at a speed of 15 m/s is accelerated by a constant force of 10000 n for 3 seconds. the new speed of the car is
Answers
Answer:
The new speed of the car is 30 m/s.
Hope you could get an idea from here.
Doubt clarification - use comment section.
What is force? And tell it's unit
Answers
Answer:
force is simply a push or a pull in a particular direction. The unit is N (newton)
Explanation:
hope this helped
Answer:
In physics force is an influence which changes the motion of an object which has mass
Its unit is N or kgms/2
Find the magnitude of the potential difference between two points located 1.2 m apart in a uniform 700 N/C electric field, if a line between the points is parallel to the field. Express your answer in volts.
Answers
The magnitude of the potential difference between the two points is 840 V
To solve the problem above, we need to use the formula of Potential difference as related to distance and electric field.
Potential difference: This can be defined as the work required to move a unit charge from a point to another in an electric field.
⇒ Formula:
V = E×d.................. Equation 1⇒ Where:
V = Potential differenceE = Electric Fieldd = DistanceFrom the question,
⇒ Given:
E = 700 N/Cd = 1.2 m⇒ Substitute these values into equation 1
V = 700(1.2)V = 840 VHence, The magnitude of the potential difference between the two points is 840 V
Learn more about Electric Field here: https://brainly.com/question/11509296
Assume each trial ( roll of cubes) represents 1000 years. Imagine that you found a rock sample was 25% Lokium and 75% DOL, how would the rock sample be given the half-life you figured out? Show your work
Answers
Assuming each trial represents 1000years, and rock samples were found, the rock sample will be given half-life of
The rock sample will be [tex]2000years[/tex] oldIsotopeWe know that the parent Isotope remaining is given by the expression
[tex]\frac{1}{2}^n[/tex]
where,
n = number of half lives passed
lokium IsotopeFrom the question, the parent Isotope remaining is [tex]25\%[/tex] lokium
[tex]0.25 = \frac{1}{4} = \frac{1}{2^2} = \frac{1}{2}^2[/tex]
Therefore,
[tex]\frac{1}{2}^2[/tex] means 2 half lives have passed.
If from the question,
1 half life = 1000years
Rock ageTherefore,
The rock sample's age = [tex]2*1000 = 2000years[/tex]
For more information on rock samples such as lokium and DOL , visit
https://brainly.com/subject/chemistry
Write down the condition required for the thermonuclear fusion.
Answers
Answer:
The main condition necessary for a controlled thermonuclear fusion:
The ions must be held together in close proximity at high temperature with a confinement time long enough to avoid cooling.
You are pulling a sled with a constant velocity using a rope held horizontally in
the snow. Using a spring scale attached to the rope, you measure the tension
to be 0.96 N. The sled's mass is 0.58 kg. Write the surface force the ground
exerts on the sled in component form, and determine its magnitude.
Answers
Answer:
Explanation:
if you are pulling in the positive direction and Upward is also positive.
F = -0.96i + 0.58(9.8)j
F = -0.96i + 5.7j
F = √(-0.96² + 5.7²) = 5.8 N
You are pulling a sled with constant velocity by using a rope then the surface force the ground exerts on the sled will be 5.8 N.
What is tension?The pulling force conveyed axially by a string, cable, chain, or another analogous object, or by either end of a rod, truss member, or another such three-dimensional object, is referred to as tension in physics. Another way to think of tension is as the action-reaction pair of forces acting at each end of the previous elements. Perhaps tension is the polar opposite of compression.
A restoring force may cause what is also referred to as tension when atoms or molecules are torn apart from one another at the atomic level and build up potential energy.
If you are moving upward and pushing in a positive way,
F = -0.96 i + 0.58(9.8) j
F = -0.96 i + 5.7 j
F = [tex]\sqrt{(-0.96^2 + 5.7^2)}[/tex]
F= 5.8 N
To get more information about Tension :
https://brainly.com/question/15880959
#SPJ5
Which of the following changes would decrease the force between two charged particles by a factor of 9? A. Decreasing the distance between the particles by a factor of 3 B. Increasing the distance between the particles by a factor of 3 C. Increasing the amount of charge on each particle by a factor of 9 D. Decreasing the amount of charge on one of the particles by a factor of 3
Answers
Option B is correct.Increasing the distance between the particles by a factor of 3 decrease the force between two charged particles by a factor of 9.
What is electric force?The electric force between the two charges is directly proportional to the product of the charge and inversely proportional to the square of the distance between them.
The electric force is found as;
[tex]\rm F = \frac{K q_1q_2}{r^2}[/tex]
The electric force between the two charges is directly proportional to the product of the charge.
The electric force is inversely proportional to the square of the distance between them.
Increasing the distance between the particles by a factor of 3 decreases the force between two charged particles by a factor of 9
Hence, option B is correct.
To learn more about the electric force, refer to the link;
https://brainly.com/question/1076352
#SPJ2
A 1500 kg car has the same momentum as a 2500 kg truck moving at 25 m/s. How fast is the car moving in m/s
Answers
Answer:
41.6m/s
Explanation:
P=mv
2500kg × 25m/s = 62500kgm/s
62500kgm/s ÷ 1500 kg = 41.6m/s
What is the significance of Isaac's name?
Answers
Answer:
ghgivjgifigo ra together aigig disgust u hoodie
At liftoff, the space shuttle Discovery has a constant acceleration of 16.4 ft/s/s with an initial velocity of 1,341 ft/s due to the rotation of the Earth. How long does it take to travel 100,000 ft?
Answers
From orbital speed formula which is the ratio of the circumference of the earth and the period of time, it will take 6097.6 seconds to travel 100,000 ft
Given that the space shuttle Discovery has a constant acceleration of 16.4 ft/s with an initial velocity of 1,341 ft/s due to the rotation of the Earth.
The period of time T it will require to travel round the a distance 100,000 ft can be calculated by using the formula below.
V = 2πr / T
Where 2πr = 100,000 ft
V = 16.4 ft/s
Substitute both in the formula above.
16.4 = 100000 / T
T = 100000 / 16.4
T = 6097.6 seconds
Therefore, it will take 6097.6 seconds to travel 100,000 ft
Learn more about orbital speed here: https://brainly.com/question/855117
please answer it I will mark it brainliest
Answers
Explanation:
1) If you spot something you think might be hazardous in your workplace, report it to your employer and safety rep straight away. Your employer should then decide what harm the hazard could cause and take action to eliminate, prevent or reduce that harm. Read more about risk assessments .
2) Complex hazards are understood as various combinations of sources of hazards that lead to the accident occurrences. ... The term "natural-technological" applies to both human-induced intensification of natural risks and any accidents in the technosphere triggered by natural processes or phenomena.
3)Risk Evaluation : To determine who may be harmed. Risk Control : Taking preventive measures to control the impact of risk.
In general, to do an assessment, you should:
Identify hazards.
Determine the likelihood of harm, such as an injury or illness occurring, and its severity. ...
Identify actions necessary to eliminate the hazard, or control the risk using the hierarchy of risk control methods.
Risk Identification : It is a process of characterizing hazards. Risk Analysis : A process of determining the impact of risk. Risk Evaluation : To determine who may be harmed.
A 4.0 ohm resistor has a current of 3.0 A for 5.0 min. How many electrons pass through the resistor during this time interval?
a. 7.5 x 10^21
b. 3.8 x 10^21
c. 8.4 x 10^21
d. 2.1 x 10^21
e. 5.6 x 10^21
Answers
Answer:
e. 5.6 x 10^21 electrons.
Explanation:
In order to calculate the charge Q passing through the resistor for in a definite amount of time is
[tex]Q \ (\mathrm{coulombs}) \ = \ I \ (\mathrm{amperes}) \ \times \ t \ (\mathrm{seconds}) \\ \\ \-\hspace{2.22cm} = \ 3.0 \ \mathrm{A} \ \times \ 5.0 \ \mathrm{min} \ \times \ \displaystyle\frac{60 \ \mathrm{sec}}{1 \ \mathrm{min}} \\ \\ \-\hspace{2.22cm} = \ 900 \ \mathrm{C}[/tex]
Thus, using the law of quantization of electric charge, the number of electrons passing through the resistor during this time interval can be calculated.
[tex]Q \ = \ n \times e \\ \\ n \-\hspace{0.18cm} = \ \displaystyle\frac{Q}{e} \\ \\ n \-\hspace{0.18cm} = \displaystyle\frac{900 \ \mathrm{C}}{1.6 \times 10^{-19} \ \mathrm{C}} \\ \\ n \-\hspace{0.18cm} = 5.6 \times 10^{21} \ \ \mathrm{electrons}[/tex], where n denotes the number of electrons and e is the unit charge of an electron ([tex]1.6 \times 10^{-19} \ \mathrm{C}[/tex]).
E
D
С
B
A
Column
Column
1.
Electron Cloud
B
2
Nucleus
b. A
3.
Electron
CD
4.
Neutron
d.
5.
Proton
ec
Answers
Answer:
1. D electron cloud
2. A nucleus
3. E electron
4. B neutron
5. C proton
Explanation:
electrons are located outside the nucleus. The nucleus holds the protons and neutrons. Protons have a positive symbol (+). electron cloud holds the electrons.
Explanation:
Electron cloud : D
Nucleus : A
Electron : E
Neutron : B
Proton : C
hope this helps you.
What are the symmetry operations of molecule AB4, where the molecule b lies at the center of the square and A lies at the center of the square and is not coplaner with B atoms. How to find the multiplication table
Answers
The symmetry operations of molecule AB₄ is tetrahedral and they are :
E : Identity4C₃ : axis of rotation 3C₂ : axis of rotation3S₄ : Rotation-reflection axis 6бdTo find the multiplication table we have to apply the multiplication table for Td symmetry ( attached below )
Given that molecule B lies at the corners of the square and molecule A lie at the center and is not coplanar with molecule B the symmetry operations of the molecules AB₄ will belong to a tetrahedral symmetry group which contains :
E : Identity4C₃ : axis of rotation 3C₂ : axis of rotation3S₄ : Rotation-reflection axis 6бdLearn more about tetrahedral symmetry group : https://brainly.com/question/1968705
The motor in a hairdryer is attached to a 3V battery. A current of 0.8A flows through the motor for 3 minutes. Calculate the total charge in this time.
Answers
The total charge in this time is equal to 144 Coulomb.
Given the following data:
Voltage = 3 VoltsCurrent = 0.8 AmperesTime = 3 minutes.To calculate the total charge in this time:
First of all, we would convert the value of time in minutes to seconds.
Conversion:
1 minute = 60 seconds
3 minutes = 180 seconds
Formula for quantity of charge.Mathematically, the quantity of charge is given by this formula:
[tex]Q=It[/tex]
Where:
Q is the quantity of charge.I is the current.t is the time measured in seconds.Substituting the given parameters into the formula, we have;
[tex]Q = 0.8 \times 180[/tex]
Quantity of charge, Q = 144 Coulomb.
Read more on charges here: https://brainly.com/question/4313738
Answer:
960 watts
Explanation:
a
A soccer player kicks a ball horizontally and it travels 150 m. The ball was kicked off of a cliff that was 75 m
high. What speed was the ball kicked at?
Answers
The ball was kicked with a speed of 38.4 m/s.
Using s = ut + 1/2gt², we find the time it takes the ball to reach the ground. Where
s = height of cliff = 75 mu = initial vertical velocity of ball = 0 m/s(since it is kicked horizontally)g = acceleration due to gravity = 9.8 m/s²t = time taken for ball to reach the ground.Substituting the values of the variables into the equation, we have
s = ut + 1/2gt²
75 m = (0 m/s)t + 1/2 × 9.8 m/s² × t²
75 m = 0 m + (4.9 m/s²) t²
75 m = (4.9 m/s²)t²
Dividing both sides by 4.9, we have
t² = 75 m/4.9 m/s²
t² = 15.306 s²
Taking square-root of both sides, we have
t = √15.306 s²
t = 3.91 s
The horizontal distance covered by the ball d = vt where
v = horizontal speed of ball and, t = time taken for the ball to reach the ground.Since we require v, we make it subject of the formula.
So, v = d/t
Given that d = 150 m and t = 3.91 s, substituting these into v, we have
v = d/t
v = 150 m/3.91 s
v = 38.4 m/s
So, the ball was kicked with a speed of 38.4 m/s.
Learn more about motion under gravity here:
https://brainly.com/question/25271752
Hey guys can you help me with this problem it's giving me a headache. "If 2500 kg roller coaster car begins its descent from 500m above above the first hill. What is its kinetic energy at the bottom of the hill."
Answers
The kinetic energy of the roller coaster at the bottom of the hill is 12250000 J
To answer this question, we must understand that the energy of a system is always conserved as explained by the law of conservation of energy.
The kinetic energy of the roller coaster will be equivalent to the potential energy of the roller coaster.
The kinetic energy of the roller coaster can be obtained as follow:
Mass (m) = 2500 KgHeight (h) = 500 mAcceleration due to gravity (g) = 9.8 m/s²Kinetic energy (KE) =?Kinetic energy = Potential energy
KE = mgh
KE = 2500 × 9.8 × 500
KE = 12250000 J
Therefore, the kinetic energy of the roller coaster is 12250000 J
Learn more about kinetic energy: https://brainly.com/question/14449170
American Football originated from which two sports?
A) Soccer and Rugby
B) Rugby and Basketball
C) Cricket and Soccer
D) Soccer and Volleyball
Answers
Answer:
b rugby and basketball
Explanation:
basket ball was made by a white man
American Football originated from Soccer and Rugby. Hence, option (A) is correct.
What is American Football?American football, sometimes known as gridiron, is a team sport played by two teams of eleven players on a rectangular field with goalposts at each end. It is known simply as football in the United States and Canada. The defense, the team without the ball, seeks to halt the offense's movement and seize control of the ball for themselves.
The offence, the team in possession of the oval-shaped football, attempts to advance down the field by running with the ball or throwing it. The offence is awarded a new set of four downs to resume the drive if they successfully gain at least 10 yards in four downs or plays. If they fail, they forfeit the ball to the defense.
Learn more about Football here:
https://brainly.com/question/15504525
#SPJ2
For a wave, the _____ the amplitude, the _____ energy the wave carries.
Multiple choice question.
A)
larger, more
B)
smaller, more
C)
larger, less
D)
smaller, same
Answers
Answer:
HIGHER & MORE OR LARGER OR MOREHENCE, THE ANSWER IS A. :)
Explanation:
#CARRYONLEARNING
BRAINLIEST PLEASE I REALLY NEED IT