Using Gizmo ,describe the main use for each fuel Coal: Petroleum: In each case, what is the end product of burning the fossil fuel,and where does it go? Help is for today

Answers

Answer 1

Answer:

See explanation

Explanation:

Coal is primarily used for electricity generation. The burning of coal leads to emission of gases such as oxides of carbon, oxides of sulphur, oxides of nitrogen and water vapour. All these go straight into the atmosphere.

Petroleum is primarily used as transportation fuels. The burning of petroleum oils mostly leads to the emission of oxides of carbon and sulphur together with water vapour into the atmosphere.


Related Questions

Rearange the equation to isolate a. (a+b/c)(d-e)=f find a =​

Answers

Answer:

[tex]a=\frac{f}{d-e}-\frac{b}{c}[/tex]

Explanation:

Hello.

In this case, for the equation:

[tex](a+b/c)(d-e)=f[/tex]

For isolating a, we must first pass (d-e) to divide at the other side as it is initially multiplying:

[tex]a+b/c=\frac{f}{(d-e)}[/tex]

Next, as b/c is adding, it passes to subtract at the other side in order to finally isolate a:

[tex]a=\frac{f}{d-e}-\frac{b}{c}[/tex]

Best regards!

Find the density of a liquid that has a mass of 24 grams and a volume of 6 ml.

Answers

Answer:

4

Explanation:

24/6 is 4.

Answer:

Mathematically: D = m/v. If you know what liquid you have, you can look up its density in a table. Once you know that, all you have to do to find the mass of the liquid is to measure its volume. Once you know density and volume, calculate mass using this relationship: mass = density • volume.

Explanation:

A gas has a volume of 300 mL and a pressure of 2 atm. What volume will the gas occupy when the pressure is
increased to 7 atm (total)?

Answers

Answer:

The answer is 85.71 mL

Explanation:

The new volume can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

Since we are finding the new volume

[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]

We have

[tex]V_2 = \frac{300 \times 2}{7} = \frac{600}{7} \\ = 85.714285...[/tex]

We have the final answer as

85.71 mL

Hope this helps you

Which of the following reactions will proceed as drawn below? (Yes or No)

Answers

Answer:

i wish i could help but t know either so i wish you luck for an answer once again truly sorry don'

Explanation:

i am sorry but i do not know :(

How are ecological islands different from geographical islands as described from the reading in the text?

Answers

Answer:

Ecological islands is just a terminology used, since it isn't surrounded by water like an actual island, instead, it's something isolated from other things, which is the same thing as an island in a way:

Island (geographical) - Land isolated from bigger "main" land masses by water.

Island (ecological) - Land which contains certain isolated features (habitat, plants, etc.).

Explanation:

An ecological island is an area of land, isolated by natural or artificial means from its surrounding land while geographical islands are a body of land surrounded by water.

What are ecological islands and geographical islands?

An ecological island refers to an area of land which is not necessarily an actual island but isolated by natural or artificial means from the surrounding land. A natural micro-habitat exists on sich lands amidst a larger differing ecosystem.

In artificial ecological islands, all non-native species are eradicated, native species are reintroduced and nurtured, and the natural or artificial border is maintained to prevent the reintroduction of non-native species.

A geographical island is a body of land surrounded by water. Continents are also surrounded by water as they are so big but they are not considered islands. Islands may be categorized as either continental or oceanic.

There are so many islands in the lakes, oceans, and rivers around the world. They vary in climate, size, and the types of organisms that inhabit them.

Learn more about ecological islands, here:

https://brainly.com/question/28690125

#SPJ2

A major component of gasoline is octane (C8H18). When octane is burned in air, it chemically reacts with oxygen gas (O2) to produce carbon dioxide CO2 and water H2O. What mass of carbon dioxide is produced by the reaction of 7.58 g of octane? Please explain the answer to me like I'm five, I want to understand but the content makes no sense.

Answers

Answer:

Mass = 23.232 g

Explanation:

Given data:

Mass of C₈H₁₈ = 7.58 g

Mass of CO₂ produced = ?

Solution:

Chemical equation:

2C₈H₁₈ + 25O₂      →     16CO₂ + 18H₂O

Number of moles of octane:

Number of  moles =  mass/molar mass

Number of moles = 7.58 g/ 114.23 g/mol

Number of moles = 0.066 mol

Now we will compare the moles of CO₂ with octane from balance chemical equation.

                  C₈H₁₈            :           CO₂

                       2              :              16

                 0.066             :           16/2×0.066 = 0.528

Mass of CO₂ produced:

Mass = number of moles × molar mass

Mass = 0.528 mol × 44 g/mol

Mass = 23.232 g

Question 5 of 5
Which two phrases describe the nature of an electromagnetic force?
O A. Acts only when objects touch each other
B. Produced by interactions between magnetic objects
O c. Not a fundamental force of nature
O D. Produced by interactions between electrically charged objects

Answers

Answer:

I think it's A and D

Explanation:

I'm not sure if it's right

Answer:

The answer is B and D

Explanation:

trust fr

Is nuclear fission exothermic or endothermic? Explain your answer.

Answers

Answer:

Exothermic

Explanation:

Nuclear fission means splitting, so there is a lot of energy being released.

The energy required to ionize boron is 801 kJ/mol. You may want to reference (Pages 93 - 98) Section 2.5 while completing this problem. Part A What minimum frequency of light is required to ionize boron

Answers

Answer:

The frequency is  [tex]f =  2,01 * 10^{15} \  Hz  [/tex]

Explanation:

From the question we are told that

   The energy required to ionize boron is [tex]E_b  =  801 KJ/mol[/tex]

Generally the ionization energy of boron pre atom is mathematically represented as

     [tex]E_a  =  \frac{E_b}{N_A}[/tex]

Here  [tex]N_A[/tex] is the Avogadro's constant with value [tex]N_A  =  6.022*10^{23}[/tex]

So

      [tex]E_a  =  \frac{801}{6.022*10^{23}}[/tex]

=>     [tex]E_a  =  1.330 *10^{-18} \  J/atom [/tex]

Generally the energy required to liberate one electron from an atom is equivalent to the ionization energy per atom and this mathematically represented as

       [tex]E =  hf  =  E_a[/tex]

=>     [tex]  hf  =  E_a[/tex]

Here h is the Planks constant with value [tex]h = 6.626 *10^{-34}[/tex]

So

       [tex]f =  \frac{1.330 *10^{-18}}{ 6.626 *10^{-34}}[/tex]

=>      [tex]f =  2,01 * 10^{15} \  Hz  [/tex]

g A 0.4395 g sample of aluminum reacts according to our experiment to produce alum. 5.1629 g of dried alum crystals are recovered. What is the percent yield of the experiment?

Answers

Answer:

92.75%

Explanation:

The overall chemical equation for the reaction in the preparation of alum from the aluminium can be expressed as:

[tex]\mathtt{2Al + 2KOH + 4H_2SO_4 +2H_2O \to 2KAl(SO_4)_2 2H_2O +3H_2}[/tex]

From above; we will see that 2 moles of Aluminium react with sulphuric acid and water to produce 2 moles o aluminium alum.

Therefore, the theoretical yield can be determined as:

[tex]=0.4395 \ g Al \times \dfrac{1 \ mol \ Al}{27 \ g Al }\times \dfrac{2 \ mol \ KAl(SO_4)_2}{2 \ mol \ Al}\times \dfrac{294.23 \ KAl(SO_4)_2}{1 \ mol \ KAl(SO_4)_2}[/tex]

= 4.789g of [tex]KAl(SO_4)_2[/tex]

To find the percent yield, we need to divide the actual yield by the theoretical yield and then multiply it with 100.

percent yield = ( mass of alum(g)/theoretical yield(g) ) × 100

percent yield = ( 4.789g / 5.1629g ) × 100%

percent yield = 0.9275 × 100%

percent yield = 92.75%

Thus, the percent yield of the experiment 92.75%

In the ionic compound KCL, which ion is the cation, and which is the anion? PLEASE HELP

Answers

Answer:

Potassium chloride, KCl , is an ionic compound formed by the electrostatic force of attraction that holds the potassium cations and the chlorine anions together

Explanation:

Need help with 8 plssss

Answers

Answer:

c,a,b,d

Explanation:

An unknown compound contains only carbon, hydrogen, and oxygen (CxHyOz). Combustion of 5.50 g of this compound produced 8.07 g of carbon dioxide and 3.30 g of water.

Required:
a. How many moles of carbon, C, were in the original sample?
b. How many moles of hydrogen, H, were in the original sample?

Answers

Answer:

a. 0.183 mol C

b. 0.366 mol H

Explanation:

Assuming total combustion, all of the carbon in the unknown compound turned into carbon dioxide, CO₂.

So first we calculate the CO₂ moles produced, using its molecular weight:

8.07 g CO₂ ÷ 44 g/mol = 0.183 mol CO₂

This means in the unknown compound there were 0.183 moles of carbon, C.

Conversely, all of the hydrogen in the unknown compound turned into water, H₂O.

Calculating the H₂O moles:

3.30 g ÷ 18 g/mol = 0.183 mol H₂O

We multiply the water moles by two, as there are 2 H moles per H₂O mol:

0.183 * 2 = 0.366 mol H.

.
Can you explain why you feel warm when you are standing near a campfire?

Answers

Answer:

You feel warm when you stand near a campfire because the flames of the fire warm your body. The heated waves are hit towards you and your body feels warm.

Hope this helped :)

Explanation:

State the number of sig figs in each value:


1) 0.00004050

2) 54.7000

3) 1,000.09

4) 0.039

Answers

Answer:

Explanation:

Significant figure implies number of digits that are to be considered. Some rules are required to be considered when writing a given expression to an expected significant figures.

So that:

1) 0.00004050 is 4 significant figures

2) 54.7000 is 6 significant figures

3) 1,000.09 is 6 significant figures

4) 0.039 is 2 significant figures

Suppose you produce 0.0451 g of N 2 gas with a volume of 0.0413 L and a pressure of 0.991 atm at 298 K. Based on the experimental data, what is the value of the gas constant R ?

Answers

Answer:

R = 0.096 L•atm•mol-1•K-1

Explanation:

According to the ideal gas law:

Pv=nRT

P = pressure
V = volume
n = # of moles
R = ?
T = temperature

Steps:

n = 0.451/289 =0.00156055

R = (0.991)x(0.0451)/(0.00156055)x(298)

R = 0.0961073

Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, value of the gas constant R is 0.0821LatmK⁻¹ when volume is 0.0413 L.

What is ideal gas equation?

Ideal gas equation is the mathematical expression that relates pressure volume and temperature.

Mathematically the relation between Pressure, volume and temperature can be given as

PV=nRT

where,

P = pressure of nitrogen gas = 0.991 atm

V= volume of nitrogen gas =0.0413 L

n =number of moles of nitrogen gas = given mass ÷Molar mass

                                                          =0.0451 g ÷28

                                                          =0.0016mol

T =temperature of nitrogen gas =298 K

R = Gas constant =?

0.991 atm×0.0413 L=0.0016×R×298 K

R=0.0821LatmK⁻¹

Therefore, value of the gas constant R is 0.0821LatmK⁻¹.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ2

Josh heated a certain amount of blue copper sulfate crystals to get 2.1 g of white copper sulfate powder and 1.4 g of water. What is most likely the mass of the blue copper sulfate that he heated and why?

Answers

Answer: The mass of blue copper sulfate is 3.5 g

Explanation:

Law of conservation of mass states that mass can neither be created nor be destroyed but it can only be transformed from one form to another form.

This also means that total mass on the reactant side must be equal to the total mass on the product side.

The chemical equation for the heating of copper sulfate crystals is:

Let the mass of blue copper sulfate be 'x' grams

We are given:

Mass of copper sulfate powder = 2.1 grams

Mass of water = 1.4 grams

Total mass on reactant side = x

Total mass on product side = (2.1 + 1.4) g

So, by applying law of conservation of mass, we get:

Hence, the mass of blue copper sulfate is 3.5 grams

Prior to science lab, Maria had been drinking a can of soda. When she walked into the lab she set it down on the hot plate at her station. She heard a liquid beginning to boil, and realized that the previous students had forgotten to turn off the hotplate and the boiling noise was from the remaining soda in the can. Without thinking, she picked up the can with her bare hands, and put it upside down into the sink which was half full of liquid. Immediately the can crushed as though it was going to be recycled. What do you think is happening to the soda and air in the can? Support you claim in Question 4, by explaining why you think it is happening. Formulate your hypothesis for the problem. Critique Maria’s laboratory safety procedures.

Answers

Answer:

See explanation

Explanation:

When the temperature was increased, the pressure of the gas in the can was increased.

When Maria removed the can and placed it in cold liquid, the decrease in temperature led to a corresponding decrease in pressure of the gas inside the can hence the can was crushed.

Hypothesis: The pressure of the gas in the can is directly proportional to temperature.

Maria was careless about the experiment. She ought to have first checked whether the hot plate was off before placing the soda can. Secondly,she should not have immediately plunged the soda can into liquid because it will shrink due to decrease in pressure. She should not also have removed the soda can with bare hands to avoid getting burns and blisters.

the two stages of cellular respiration.



Which belongs in the area marked X?

Energy is released.
Oxygen is used up.
Glucose is broken down.
Carbon dioxide is used up.

Answers

Oxygen is used up and glucose is broken down.

Answer:

Oxygen is used up

Explanation:

Have an amazing day! And here is the attachment If you don't believe me. Brainliest would be nice.

Question: Can a penny dropped from a building kill a pedestrian below?


Hypothesis:


Controls:


Independent variable:


Dependent variable:


Conclusion:

Answers

Answer:

Hypothesis: IF a penny is dropped from a building, THEN it would kill a pedestrian below

Controls: Same building, Same distance

Independent variable: Penny

Dependent variable: Pedestrian's death

Conclusion: The hypothesis is rejected

Explanation:

- The hypothesis is a testable explanation to an observed problem or asked question. Based on the cientific question in this question, a possible hypothesis will be: IF a penny is dropped from a building, THEN it would kill a pedestrian below

- Independent variable is the variable that is changed or manipulated in an experiment. In this case, the PENNY is the independent variable

- Dependent variable is the variable that responds to the change made to the independent variable. It is the measured variable. In this case, the dependent variable is the DEATH OF PEDESTRIANS.

- Controls are those variables that is kept constant or unchanged throughout the experiment. The controls in this experiment are: Same building, Same distance of throw etc.

- The conclusion is whether the hypothesis is accepted or not depending on the result of the experiment conducted. In this case, the hypothesis will be rejected if the penny doesn't kill a pedestrian

Which solution, NaCl(aq) or CH3OH(aq), conducts electricity?

Answers

Answer:

NaCl(aq)

Explanation:

Nacl(aq) is an electrolyte when it melts and it conducts electricity. This is due to the fact that when it is in solution, it dissociates to be Na+ and Cl-. These ions are conductors of electricity. It conducts electricity because of the movements and also the discharge of ions. CH3OH(aq) is not a conductor of electricity therefore the first option is the answer.

Compare ionic, covalent, and metallic bonds based on each's strength

Answers

Answer:

Covalent bond involves the sharing of electrons, while metallic bonds have strong attractions and ionic bonds involve the transferring and accepting of electrons from the valence shell. The adhering property of an atom, in order to arrange themselves in a most stable pattern by filling their outermost electrons orbit

Explanation:

hope it helps:)

A gaseous mixture contains 441.0 Torr H2(g), 387.3 Torr N2(g), and 74.5 Torr Ar(g). Calculate the mole fraction, ????, of each of these gases.
????H2=
????N2=
????Ar=

Answers

Answer:

XH₂ = 0.4885

XN₂ = 0.4290

XAr = 0.0825

Explanation:

Step 1: Given data

Partial pressure of H₂ (pH₂): 441.0 TorrPartial pressure of N₂ (pN₂): 387.3 TorrPartial pressure of Ar (pAr): 74.5 Torr

Step 2: Calculate the total pressure (P)

The total pressure is equal to the sum of the partial pressures of all the gases.

P = pH₂ + pN₂ + pAr = 441.0 Torr + 387.3 Torr + 74.5 Torr = 902.8 Torr

Step 3: Calculate the mole fraction (X) of each gas

We will use the following expression.

Xi = pi / P

where,

Xi: mole fraction of the gas i

pi: partial pressure of the gas i

P: total pressure

XH₂ = pH₂ / P = 441.0 Torr / 902.8 Torr = 0.4885

XN₂ = pN₂ / P = 387.3 Torr / 902.8 Torr = 0.4290

XAr = pAr / P = 74.5 Torr / 902.8 Torr = 0.0825

Problem:
[Ar]4s2
Identify the period (p) , group (g) and valence electrons block of the element

Answers

Answer:

it is Calcium (Ca)

4th period, 2nd group, 2 valence electrons

A car travels for 0.5 hours and goes 25 miles. What is the car's speed? (Remember sad + t)

Answers

Answer:

s = 22.352 m/s

Explanation:

Given data:

Time taken = 0.5 hours

Distance cover = 25 miles

Car speed = ?

Solution:

First of all we will convert the units.

1 hour = 3600 sec

0.5 hr ×3600 sec / 1hr = 1800 sec

miles to meter:

25 mi × 1609 m/ 1 mi = 40233.6 m

Formula:

s =  d/t

s = speed

d = distance

t = time

Now we will put the values in formula.

s = 40233.6 m / 1800 sec

s = 22.352 m/s

The molar mass of gallium (Ga) is 69.72 g/mol.
Calculate the number of atoms in a 27.2 mg sample of Ga.
Write your answer in scientific notation using three significant figures.
atoms Ga

Answers

Answer:

2.35 x 10²⁰ atoms Ga

Explanation:

After converting from mg to g, use the molar mass as the unit converter to convert to moles. Then using Avogadro's number, 6.022 x 10²³ convert from moles to atoms of Ga.

[tex]27.2mgGa*\frac{1g}{1000mg} *\frac{1 mol Ga}{69.72gGa} *\frac{6.022*10^2^3 atoms Ga}{1 molGa} = 2.349 * 10^2^0 atoms Ga[/tex]

Then round to 3 significant figures = 2.35 x 10²⁰ atoms Ga.

The number of atoms in 27.2 mg sample of Ga is 2.35 × 10²⁰ atoms

Stoichiometry

From the question, we are to calculate the number of atoms in a 27.2 mg sample of Ga.

First, we will determine the number of moles of Ga present

Using the formula,

[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass} [/tex]

Mass = 27.2 mg = 0.0272 g

Molar mass = 69.72 g/mol

Then,

[tex]Number\ of\ moles \ of\ Ga = \frac{0.0272}{69.72} [/tex]

[tex]Number\ of\ moles \ of\ Ga = [/tex] 0.000390132 moles

Now, for the number of atoms present

From the formula

Number of atoms = Number of moles × Avogadro's constant

Then,

Number of Ga atoms = 0.000390132 × 6.022×10²³

Number of Ga atoms = 2.35 × 10²⁰ atoms

Hence, the number of atoms in 27.2 mg sample of Ga is 2.35 × 10²⁰ atoms

Learn more on stoichiometry here: https://brainly.com/question/14464650

The degree of unsaturation, or index of hydrogen deficiency, is the number of pi bonds plus rings in a molecule. Specify the degree of unsaturation (index of hydrogen deficiency) of the following formulas:
(a) C5H6
(b) C10H6Cl2
(c) C4H3NO

Answers

Explanation:

The degree of unsaturation is given as;

Degree of unsaturation = (2C + 2 + N - H - X) / 2

(a) C5H6

Using the formular above;

Degree of unsaturation = [ 2(5) + 2 - 6] / 2

Degree of unsaturation = [ 12 - 6 ] / 2 = 3

(b) C10H6Cl2

Using the formular above;

Degree of unsaturation = [ 2(10) + 2 - 6 -2 ] / 2

Degree of unsaturation = [ 22 - 8 ] / 2 = 7

(c) C4H3NO

Using the formular above;

Degree of unsaturation = [ 2(4) + 2 - 3 -1 ] / 2

Degree of unsaturation = [ 10 - 4 ] / 2 = 3

Note: Oxygen is ignored because its presence has no effect on the degree of unsaturation.

Enter your answer in the provided box. A sample of an unknown gas effuses in 11.1 min. An equal volume of H2 in the same apparatus under the same conditions effuses in 2.42 min. What is the molar mass of the unknown gas

Answers

Answer: The molar mass of the unknown gas  is 9 g/mol

Explanation:

From Graham's law of effusion rates, the rate of effusion of a gas is inversely proportional to the square root of its molar mass.

[tex]\frac{rate_1}{rate_2}=\sqrt{\frac{M_2}{M_1}} [/tex]

[tex]rate=\frac{volume}{time} [/tex]

Rate is volume effused per unit time. Since, the volumes are same, the formula could be written as:

[tex]\frac{t_B}{t_A}=\sqrt{\frac{M_B}{M_A}}[/tex]

Putting the values in the formula:

[tex]\frac{2.42min}{11.1min}=\sqrt{\frac{M_{H_2}}{M_A}} [/tex]

[tex]\frac{2.42min}{11.1min}=\sqrt{\frac{2}{M_A}} [/tex]

Squaring both sides:

[tex]\frac{2}{M_A}=0.218[/tex]

[tex]M_A=9g/mol[/tex]

The molar mass of the unknown gas  is 9 g/mol

Which is the best surface for absorbing heat radiation? ☆ Shiny white Shiny black Dull black Dull white​

Answers

Dull black is better at absorbing light then shiny surfaces

Dull black surface are good absorbers of radiation.

Thermal radiation

The process by which energy in the form of electromagnetic radiation is emitted by a heated surface and travels directly to its absorption point at the speed of light.

The rate at which a body absorbs or radiates thermal radiation relies upon the nature of the surface as well.

According to the Kirchhoff's radiation law, the objects, which are good emitters are also good absorbers.

A blackened surface is an excellent absorber as well as an excellent emitter.

A black body refers to a body, which is regarded as a perfect radiator and absorber of electromagnetic radiations, a dull black surface is a good absorber of heat radiation.

Thus, dull black surface is the best surface for absorbing heat radiation.

Find out more information about thermal radiation here:

https://brainly.com/question/12072129

20 POINTS PLEASE ANSWER ASAP!!!!

Why is calcium (Ca) in group 2, period 4 on the periodic table?

A Calcium, like all group 2 elements, is nonreactive and a gas at room temperature.

B Calcium, like all period 4 elements, is nonreactive and a gas at room temperature,

C Calcium, like all group 2 elements, is reactive and a solid at room temperature.
D. Calcium, like all period 4 elements, is reactive and a solid at room temperature.​

Answers

C
the period of Ca just indicates the number of shells it has and the group shows the electrons in the outermost shell which infact affects its chemical properties. Group 2 element are all solids abs very reactive

Calcium (Ca) is in group 2 and period 4 on the periodic table be because Calcium has 2 valence electrons and 4 electron shell. Thus, calcium is a metal like all other group 2 element.

The correct answer to the question is Option C. Calcium, like all group 2 elements, is reactive and a solid at room temperature.

Calcium is a group 2 element majorly because it has 2 valence electrons. It is also in period 4 because it has 4 electron shells.

Being a group 2 element, calcium is a solid at room temperature and also reactive. All elements in the group 2 are metals.

There are other elements in period 4 which are not solid. For example krypton is an element in period 4 and it is a gas and not reactive.

From the above information, we can conclude that the correct answer to the question is:

Option C. Calcium, like all group 2 elements, is reactive and a solid at room temperature.

See attached image

Learn more: https://brainly.com/question/5979466

Other Questions
Write the word sentence as an equation. Then solve.The difference between a number pand 6 is -14EquationSolution p=25 The origins of Islam can be traced to_____The teachings of the apostlesThe writings of ConfuciusThe teachings and conquests of MuhammadBuddha's search for enlightenment Which of the following did NOT lead to the Louisiana purchase?A. The united states won the american revolution and was exandingB. The united states gave up all claims on texas to spain C. Napolen forced spain to return louisiana to franceD. Napolen needed to finance his battles in europe. Help me plzIts 8th grade math And ion know what the answer is.. The SQL SELECT command is capable of executing ____. a. only relational Select operations b. only relational Select and Project operations but not relational Join operations c. relational Select, Project, and Join operations individually but not in combination d. relational Select, Project, and Join operations individually or in combination e. None of the above. ax+by=csolve for equation for y Sciences Grad Bosch Law of Conservation of Mass - Assess itcontentsTarget: 10/2001Science and EngingAchemical reaction takes place in a closed system. The mass of the reactants before the reaction was55 watte mass of the products of the reaction be according to the law of conservationProperties of Matter Retail Method; Gross Profit Method Selected data on merchandise inventory, purchases, and sales for Jaffe Co. and Coronado Co. are as follows: Cost Retail Jaffe Co. Merchandise inventory, February 1 $400,000 $615,000 Transactions during February: Purchases (net) 4,055,000 5,325,000 Sales 5,100,000 Coronado Co. Merchandise inventory, May 1 $400,000 Transactions during May through October: Purchases (net) 3,150,000 Sales 4,750,000 Estimated gross profit rate 35% Required: 1. Determine the estimated cost of the merchandise inventory of Jaffe Co. on February 28 by the retail method, presenting details of the computations. Jaffe Co. Cost of the Merchandise Inventory February 28 Cost Retail $ $ $ $ Ratio of cost to retail price: % $ $ 2a. Estimate the cost of the merchandise inventory of Coronado Co. on October 31 by the gross profit method, presenting details of the computations. y=1x-3 find the value of y Help on activity serious On a coordinate plane, a line is drawn between points (negative 4, negative 3) and (negative 1, 4).Use the Pythagorean theorem to find the distance on the coordinate plane.a2 + b2 = c2What is the distance between the two points?StartRoot 20 EndRootStartRoot 40 EndRootStartRoot 45 EndRootStartRoot 58 EndRoot PLEASE HELP 2 or 3 SENTENCES PLSLSLSLSLHow have scientists, inventors and / or engineers used the properties of States of Matter to benefit our society? The football team has a total of 25 jerseys . There are 5 mediums-sized jerseys . What percent of the Jerseys are mdium-sized Jersey? what type of number is -16 square root What is the amount of alcohol present in the blood?O Blood Alcohol ConcentrationO DUIO OxidationFermentation HELP ASAP WILL MARK BRAINLIESTPublic Libraries The number of libraries in the UnitedStates from 1980 to 2000 can be modeled by the functionf(x) 5 38.9x 1 8685.8 where x is the number of yearssince 1980.a. Graph the function and identify its domain and range.b. Find the number of libraries in the United States in 1996.Explain how you found your answer.c. When were there 9000 libraries in the United States?Explain how you found your answer. CF Manufacturing purchased inventory for $5,300 and also paid a $280 freight in bill 2/10, net 30. CF Manufacturing returned 60% of the goods to the seller and paid the bill within the discount period. What is the final inventory cost Any kpop stans hard or soft faverite group and bias What would be the complementary strand to ATC GTT ACG? Alonso plans to buy a new kayak that costs $2,100. But he needs to pay a 8.5% tax. What is the total cost of the kayak?