Answer:
4Al + 3O2 --> Al2O3
Step 1; fi
Which biotic factor do all living things depend on?
O Water
Plants
O Air
(due today please help!!)
Answer:
plants
Explanation:
Which of the following phrases best describes an atom? Choose the two correct answers.
A.
made up of protons, electrons, and neutrons
B.
made up of solids, liquids, and gases
C.
largest unit of matter
D.
smallest unit of matter
E.
made up of water
Answer:
A & D
Explanation:
all of the other things are made up of atoms, not what atoms themselves are made of. they are not large, and they make up all matter
An atom is made up of a nucleus and revolving electrons. Inside the nucleus protons and neutrons are located. Thus the components of an atom are protons, electrons and neutrons. Thus, option A is correct.
What is an atom?An atom is the basic unit of every substances. Atoms combine together to form molecules, molecules then forms compounds and so on.
The inner core of an atom is called nucleus which contains positively charged particles namely protons and neutral particles neutrons. There are circular paths of fixed energy surrounding the nucleus.
The circular paths around the nucleus is called orbits through which the electrons are revolving. Electrons are negatively charged particles and they neutralize equal number of positive charges.
A neutral atom have equal number of protons and electrons and this number is called its atomic number. The sum of number of protons and neutrons is called the mass number.
Hence, an atom is made up of protons, electrons, and neutrons and option A is correct.
To find more about atoms, refer the link below:
https://brainly.com/question/13654549
#SPJ6
give me examples of everyday problems you think involve the green substances copper acetate or copper sulfate.
Answer: Copper sulfate is also called blue vitriol, Roman vitriol, Salzburg vitriol, blue copperas or bluestone, which is an inorganic or chemical compound comprised of Copper, Sulphur and Oxygen. It is an odorless crystalline substance, electric blue and highly toxic, which is produced in industries by treating the copper metal with hot concentrated sulfuric acid or treating its oxides with dilute sulfuric acid. It can be produced by slowly leaching low-grade copper ore in air and bacteria may be used to hasten the process.
hello, what’s the difference between oxidation and oxidising agents?
Answer:
An oxidising agent oxidises something else. Oxidation is loss of electrons (OIL RIG). That means that an oxidising agent takes electrons from that other substance.
Explanation:
How many grams of chlorine can be produced by the electrolysis of sodium chloride solution
Fe²O³ + 3CO --> 2 Fe + 3CO²
calculate the mass of chlorine that can be formed from 50g of sodium chloride
Answer:
Therefore,900 C of charge produce produce chlorine=(71g)(1.93×105C)×(900C)=0.331g.
Explanation:
Follow me..........
What are two or more substances not chemically combined called? *
Element
Compound
Mixture
Atom
Answer:
✖︎ Mixture← is the right answer answer, so don't choose that....…
THE corrects answer would be MIXTURE
!!!!!!Brainliest??
EXPLANATION
✰1. I take the quiz
✰2. The word already describe it self, mixture is a substance made by mixing other substances together.
✰a mixture is a material made up of two or more different substances which are physically combined. A mixture is the physical combination of two or more substances in which the identities are retained and are mixed in the form of solutions, suspensions and colloids.
When you add so much solute that no more dissolves you have a(n)
Answer:
When you add so much solute that no more dissolves you have a SATURATED SOLUTION.
Answer:
iIt is called as point of saturation or saturated solution
can i has help?
A 2-column table with 7 rows. The first column labeled Material has entries aluminum, iron, lead, sand, steel, wood, water. The second column labeled Specific Heat (Joules per gram times degrees Celsius) has entries 0.90, 0.44, 0.16, 0.83, 0.49, 1.80, 4.18.
Use this chart showing the different specific heat of various materials to answer the questions.
Which material has the highest specific heat?
Which material has the lowest specific heat?
Which material has the ability to absorb twice as much heat as aluminum when placed in the same environment of mass and temperature?
Answer:
water, lead, and wood
Explanation:
All are correct on Edg 2020
Answer:
Which material has the highest specific heat?
water
Which material has the lowest specific heat?
lead
Which material has the ability to absorb twice as much heat as aluminum when placed in the same environment of mass and temperature?
wood
Explanation:
find ionic compounds
Answer:
1:1
Explanation:
The ratio of metal cationic atom to non-metal anionic atom in the compound is 1:1.
This is an ionic compound.
This is because metal cationic atom has two valence electrons. Non-metal anionic oxygen has six valence electrons Calcium loses two of its valence electrons to be isoelectronic with Ar and this confers a stable configuration to it. Non-metal oxygen atom accepts the electrons and adds 2 to its 6 electrons to become isoelectronic with neon. So, 1 metal cationic atom combines with 1 non-metal anionic atom to form the compound.
How many moles would there be in 500,000,000,000 atoms of silver? Show your calculation
and answer in unit
Answer: 3.01 * 10^35
Explanation:
500,000,000,000 * 6.02 * 10^23
There are 3 [tex]\rm \times\;10^3^5[/tex] moles of silver present in the 500,000,000,000 atoms of silver.
According to the concept of molar mass:
1 atom = [tex]\rm 6.023\;\times\;10^2^3[/tex] moles
500,000,000,000 atoms of silver can be written as:
5 [tex]\rm \times\;10^1^1[/tex] atoms of silver.
1 atom = [tex]\rm 6.023\;\times\;10^2^3[/tex] moles
5 [tex]\rm \times\;10^1^1[/tex] atoms = 5 [tex]\rm \times\;10^1^1[/tex] [tex]\times[/tex] [tex]\rm 6.023\;\times\;10^2^3[/tex] moles
5 [tex]\rm \times\;10^1^1[/tex] atoms = 30.115 [tex]\rm \times\;10^3^4[/tex] moles
= 3 [tex]\rm \times\;10^3^5[/tex] moles.
The moles of silver are present in the 500,000,000,000 atoms of silver are 3 [tex]\rm \times\;10^3^5[/tex] moles.
For more information about mole, refer the link:
https://brainly.com/question/20486415?referrer=searchResults
Which structure carries instructions for producing the proteins that help make a person’s hair curly?
phosphate
deoxyribose
lipid
gene
Answer: Bipalium kewense is a species of flatworm that can reproduce sexually; however, instead it usually breaks into two pieces, each of which becomes a fully functioning adult.
What is the main method of reproduction for these flatworms?
binary fission
fragmentation
sporulation
fertilization
Answer:
The correct answer should be :D). Gene on edg.
WILL GIVE BRAINLIST IF RIGHT
While visiting Thor's Hammer in Bryce Canyon National park, you observe red coloring on the landform. What natural process most likely caused the red coloring? (4 points)
Chemical weathering
Deposition
Erosion
Mechanical weathering
Answer:
Chemical weathering because the landform changed color
Explanation:
Answer: A) Chemical Weathering
Explanation:
I took the test :)
What are the coefficients when the chemical equation below is balanced?
_Fe + _H2SO4 = _Fe2(SO4)3 + _H2
A) 2,3,3,3
B) 3,2,3,1
C) 1,1,1,1
D) 2,3,1,3
Complete each of these
please help
How many joules of heat are needed to raise the temperature of 250 g of liquid weer by 500°C
Answer:
What is the total number of joules of heat energy needed to 16) How many joules of heat ... raise the temperature of 10 grams of water from 20°Сto ... 2) · The temperature of 100 grams of water changes from 16°C/7How many kilojoules of ... temperature of 500. grams of water from 10.0°C to 30.0°C? ... m250 -Q=209051. | c= ...
Explanation:
I hope I help :))
a student places a small stone with a mass of 5 g into a graduated cylinder containing 50 mL of water. With the stone in the graduated cylinder, the water rises to 75 mL. What is the density of the stone?
Answer:
The answer is 0.2 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
volume = final volume of water - initial volume of water
volume = 75 - 50 = 25 mL
We have
[tex]density = \frac{5}{25} = \frac{1}{5} \\ [/tex]
We have the final answer as
0.2 g/mLHope this helps you
Help! Please will give brainliest for right answer!
Answer:
a positive nucleus gets smaller the negative electrons are attached closer in
Explanation:
{b}
In experiment B. the iron filings weighed 2.0g at the beginning of the experiment
and the iron sulphide produced weighed 2.8g.
Explain this increase in mass.
Explanation:
The increase in mass is because the iron fillings have combined with a sulfide to produce iron sulfide and so the mass will increase.
In such a reaction like this, the mass of the reactants must be conserved. By so doing, the mass of reactants and products must be the same.
When two substances combine together, their masses added up to that of the individual masses. This helps to conserve the mass.
Which is the right answer?
Answer:
i think its C
Explanation:
In the quantum mechanical model, what two words do they use to describe
particles?
Answer:
This question is incomplete
Explanation:
This question is incomplete but one can assume the answer from the definition of quantum mechanics. Quantum mechanics is the science that describes particles in nature at the atomic and subatomic particle (electron, proton and neutron) level. Thus it can be assumed that atoms and subatomic particles are used to broadly describe particles.
Fill in the blanks. SPELLING COUNTS!!
Types of Forces
A
repel
is a force that causes an object to move away from the thing pushing it.
A
magnet
is a force that causes an object to move toward the thing pulling it.
Motion is caused by familiar
like a push, pull, friction, gravity, and magnetic attraction.
is a force which resists motion and can also create heat.
Magnetism is a force that can
(pull) and
(push).
Gravity
is a force that pulls objects toward the Earth’s center.
Please answer the blank question or answer all for brainliest
Answer:
cocooooooooooooooooooooooooooo
Explanation:
3n\hj 3ihhjcvyh 6]0u70-uh]h ]]huc7]]uh uhu-hu -u h-u7-u37-]u3- -7u7uh5h57h0u70y c0yuuh-u-]u]3u3 cuyuycuy0nuy0yc6udy8056uy08
I added 6 to a certain number and then divide the result by 3. Find the number if my final answer is 5. (show working)
Answer:
let the number be x
so (x+6)/3 =5
x+6=15
x=9
How many atoms is 3.49x1032 moles of KOH?
2.1 x 10⁵⁶ atoms
Further explanationThe mole is the number of particles(molecules,atoms,ions) contained in a substance
1 mol = 6.02.10²³
number of atoms :
[tex]\tt 3.49\times 10^{32}\times 6.02\times 10^{23}=2.1\times 10^{56}[/tex]
Rank these elements from smallest to largest atomic radii: zinc, calcium, radium, and bromine.
Select one:
O a. calcium, radium, zinc, bromine
O b. calcium, zinc, bromine, radium
c. bromine, zinc, calcium, radium
d. bromine, zinc, radium, calcium
Answer:
The correct option is;
c. Bromine, zinc, calcium, radium
Explanation:
The atomic radii of the elements as arranged in the periodic table decreases across the period and increases down the groups
The location of each of the elements are;
Zinc: Period 4, Group 12
Calcium: Period 4, Group 2
Radium: Period 7, Group 2
Bromine: Period 4, Group 17
Therefore, the element with the largest atomic radius = Radium
The element with the smallest atomic radius = Bromine
Calcium comes before zinc on period 4, therefore, the atomic radius of calcium is larger than that of zinc
The rank of the elements from smallest to largest atomic radius is therefore;
Bromine, zinc, calcium, radium.
what is the name of the structure?
Answer:
The structure is called Propyl ethanoate
Words made from letters of the alphabet are similar to molecules made from atoms. Based on what you already know about matter, which statement best explains this comparison?
A. Atoms can make many different molecules, just like letters can make many different words.
B. Molecules must contain many different atoms, just like words must contain many different letters.
C. There are 26 different atoms that are used to form molecules, just like there are 26 different letters that are used to form words.
D. There are no rules for how letters combine to make words, just like there are no rules for how atoms combine to make molecules.
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. The correct option is option A.
What is atom?
Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit. Atoms can make many different molecules, just like letters can make many different words.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.
Therefore, the correct option is option A that is Atoms can make many different molecules, just like letters can make many different words.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ5
Changes in which two characteristics can indicate a physical change?
A. Shape
B. Reactivity
O C. State
D. Flammability
Changes in shape and state are the two characteristics which indicate a physical change.
What are physical changes?Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.
Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.
They involve only rearrangement of atoms and are often characterized to be changes which are reversible.
Learn more about physical changes,here:
https://brainly.com/question/17931044
#SPJ2
Which type of bond shares the electrons between two elements?
Answer:
Covalent Bonds
General Formulas and Concepts:
Different types of bondsExplanation:
We have 3 types of bonds: Polar Covalent, Nonpolar Covalent, and Ionic bonds.
Nonpolar Covalent bonds share the electrons equally between the compound.
Polar Covalent bonds do NOT share the electrons equally, but STILL SHARE the electrons; the electron tends to stay with the element with the stronger electron affinity and thus creates dipoles.
Ionic bonds DO NOT share electrons. The electrons are transferred to the respective elements.
Polyacrylamide is used in manufacturing soft contact lenses. It consist of 50.69% carbon, 19.71% nitrogen, 7.09% hydrogen, and 22.51% oxygen. Calculate the empirical formula for polyacrylamide.
Answer: The empirical formula is [tex]C_3NH_5O[/tex].
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of C = 50.69 g
Mass of N= 19.71 g
Mass of H = 7.09 g
Mass of O = 22.51 g
Step 1 : convert given masses into moles.
Moles of C = [tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{50.69g}{12g/mole}=4.22moles[/tex]
Moles of N=[tex]\frac{\text{ given mass of N}}{\text{ molar mass of N}}= \frac{19.71g}{14g/mole}=1.41moles[/tex]
Moles of H=[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{7.09g}{1g/mole}=7.09moles[/tex]
Moles of O = [tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{22.51g}{16g/mole}=1.41moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For C =[tex]\frac{4.22}{1.41}=3[/tex]
For N = [tex]\frac{1.41}{1.41}=1[/tex]
For H = [tex]\frac{7.09}{1.41}=5[/tex]
For O =[tex]\frac{1.41}{1.41}=1[/tex]
The ratio of C:N:H: O = 3:1:5:1
Hence the empirical formula is [tex]C_3NH_5O[/tex].
difference between acids and bases in terms of ions
Answer:
The answer will be listed below.
Explanation:
An acid is a substance that produces (H+) as the only positive ion when mixed with water. A base is a substance that produces (OH–) as the only negative ion when mixed with water.
Answer:
An acid increases the concentration, A base is a substance that releases hydroxide
Explanation: A base donates electrons and accepts protons, and acid is a substance that donates protons.