Answer:
It's A & C
Explanation:
:p
Knowing the surface tension of isopropanol in air and surface tension of water in air we can say that:
Isopropanol will have a flatter meniscus than water because the forces between the molecules are smaller Isopropanol will have a lower boiling point than water because the forces between the molecules are smaller.What is isopropanol alcohol for?Isopropyl alcohol (IPA) at various concentration levels is considered a disinfectant (not for bacterial spores), virucide, fungicide and an effective waste removal agent widely used in cleanrooms and other contamination controlled environments.
So compare the surface tension of isopropanol and the water we can say that Isopropanol will have a flatter meniscus than water because the forces between the molecules are smaller and Isopropanol will have a lower boiling point than water because the forces between the molecules are smaller.
See more about isopropanol at brainly.com/question/22284953
#SPJ2
A B-52 bomber jet flies at a horizontal velocity of 286.2 m/s and at an altitude of 7500 m above the ground. How far away horizontally should a payload be dropped to land on a target?
Answer:
11196.14 m
Explanation:
From the question given above, the following data were obtained:
Horizontal velocity (u) = 286.2 m/s
Height (h) = 7500 m
Horizontal distance (s) =?
Next, we shall determine the time taken for the payload to get to the target. This can be obtained as follow:
Height (h) = 7500 m
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =?
h = ½gt²
7500 = ½ × 9.8 × t²
7500 = 4.9 × t²
Divide both side by 4.9
t² = 7500 / 4.9
Take the square root of both side
t = √(7500 / 4.9)
t = 39.12 s
Finally, we shall determine the horizontal distance as follow:
Horizontal velocity (u) = 286.2 m/s
Time (t) = 39.12 s
Horizontal distance (s) =.?
s = ut
s = 286.2 × 39.12
s = 11196.14 m
Thus the payload will travel 11196.14 m horizontally in order to hit the target
A student lists a set of materials
1. Wood
2.hydrogen gas
3. Milk
4. Water
Which materials can be medium through which a wave can travel
A. hydrogen gas
B.wood
C. Milk and water
D. wood, hydrogen gas, milk, and water
Answer:
D. wood, hydrogen gas, milk, and water
Explanation:
Waves will transmit through wood, hydrogen gas, milk and water.
Waves are disturbances that propagates energy usually through a material medium.
Most mechanical waves pass through the given medium. Only electromagnetic waves do not really require a material medium for their propagation. They can be propagated through a vacuum.
A turtle is moving at a speed of 1.5 m/s for a time of 120 s. What is the distance the turtle travels?
Answer:
The answer is 180 mExplanation:
The distance covered by an object given it's velocity and time taken can be found by using the formula
distance = velocity × time
From the question we have
distance = 1.5 × 120
We have the final answer as
180 mHope this helps you
Answer:
180 meters
Explanation:
1.5 m/s x 120 s
Strontium, Sr, will
valence electrons when forming an ionic bond.
O lose 1
Olose 3
Olose 2
O gain 1
Answer:
lose 2
Explanation:
Sr is an alkali metal which forms 2+ ion.
Dr. Aloysius found four homogeneous mixtures, but he thinks that only three are alloys. He tests each one and determines their elemental compositions. Which of the following is not a possible alloy?
A. carbon and boron
B. iron an nickel
C. aluminum and magnesium
D. iron, carbon, and nickel
Answer:
A. carbon and boron
Explanation:
Carbon and boron is not an alloy.
An allow forms between metals and metals using their huge electron could.
Carbon is a non-metal, boron is a also a non-metal
Two non-metals combining together does not make an alloy.
Iron, nickel, aluminum are all metals.
Answer:
carbon and boron
Explanation:
carbon and boron
A rock falls off a cliff that is 82 m high. How fast is the rock moving when it hits the ground?
Answer:
40.1m/s
Explanation:
This is a kinematics problem
x = 82m
a = -9.8m/s^2
v(initial) = 0
Find: v(final)
Using kinematics equation:
vf^2 = vi^2 + 2a(delta)x
vf^2 = 0 + 2*(-9.8)*(82)
vf = sqrt(1607.2) = 40.09m/s
The is traveling with a velocity of 40.1m/s when it hits the ground.
3N 8N net force???
PLEASE HELP !!!
Answer:
First tell what are the directions and what we've to do?? add subtract or multiply??
What is the gravitational acceleration on which a 2-kilogram mass has a weight of 16 Newton's?
Answer:8 m/s ^2
Explanation:
Explain how bar graphs can show comparisons between 2 topics.
Answer:
A bar chart is typically used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
Explanation:
A bar chart also known as a bar graph can be defined as the graphical representation of data (informations) by using vertical columns or rectangular bars. When a data set is observed, a bar chart can be used to graphically represent or record the total or overall amount of information contained therein. Generally, bar charts are used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
The bar graph has a x-axis and a y-axis used to represent the various categories of data collected.
In this scenario, the x-axis is used to denote the points earned by the teams while the y-axis is used to denote the seasons as seen in the image attached.
Hence, point scores by team (Team A, B and C) per seasons (2002, 2003, 2004 and 2005) can best be compared through the use of a bar chart (graph).
Answer:
Answer above is correct i only put this:
Explanation:
A bar chart is typically used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
CUAL DE LAS SIGUIENTES LEYES NO PERTENECEN A LOS 3 PRINCIPIOS DE NEWTON? 1.LEY DE LA ATRACCION 2.LEY FUNDAMENTAL DE LA DINAMICA 3.LEY DE ACCION Y REACCION 4.LEY DE LA INERCIA
Answer:
La Ley de atracción no pertenece a los tres principios de Newton.
Explanation:
Las leyes de Newton son tres principios que sirven para describir el movimiento de los cuerpos, basados en un sistema de referencias inerciales (es aquél que está en reposo o se mueve con velocidad constante, es decir, no tiene aceleración).
Las 3 leyes de Newton son:
Primera Ley o Ley de Inercia : Esta ley enuncia que todo cuerpo permanece en su estado de reposo o de movimiento rectilíneo uniforme a menos que otros cuerpos actúen sobre él. Explica que para modificar el estado de movimiento de un cuerpo es necesario actuar sobre él. Segunda ley o Principio Fundamental de la Dinámica : Esta ley dice que la fuerza que actúa sobre un cuerpo es directamente proporcional a su aceleración. Es decir, si sobre un cuerpo actúa una fuerza, dicho cuerpo modificará su velocidad, es decir, adquirirá una aceleración. Dicha fuerza y su aceleración generada son proporcionales y están relacionadas mediante: F=m*a donde F es la fuerza aplicada, m es la masa del cuerpo sobre el que se aplica la fuerza y a es la aceleración adquirida por dicho cuerpo.Tercera ley o Principio de acción-reacción : Esta ley expresa que cuando un cuerpo ejerce una fuerza sobre otro, éste ejerce sobre el primero una fuerza igual y de sentido opuesto.Entonces, la Ley de atracción no pertenece a los tres principios de Newton.
20. Show that an acceleration of 0.67 m/s/s is the result if a force of 1000N is exerted on a 1500 kg
car.
Explanation:
Given parameters:
Mass of the car = 1500kg
Force applied = 1000N
Acceleration = 0.67m/s²
Unknown:
Proof that the acceleration will result from the applied force on the car
Solution:
According to newton's second law of motion,
Force = mass x acceleration
So;
Acceleration = [tex]\frac{Force }{mass}[/tex]
Now insert the parameters and solve;
Acceleration = [tex]\frac{1000}{1500}[/tex] = 0.67m/s²
We have shown that the acceleration is 0.67m/s²
Rate at which wave travels or propagates
Answer:
v =fλ v = f λ where v
Explanation:
A gas occupies 500mL at a temperature of 20 degrees Celsius. What is the volume at 150 degrees Celsius?
Answer: 3750 ML
Explanation:
Emily rides on a horizontal rotating platform of radius r at an amusement park
and moves at a linear velocity, vt = 1 m/s, one third the way from the center to the
outer edge, and a rotational velocity of 2 RPM. How much would her linear and
rotational velocities be if she moves to the outer edge?
Answer:
Her linear velocity on the outer edge is 3 m/s
Her rotational velocity, is constant at 2 RPM
Explanation:
The given parameters are;
The radius of the rotating platform = r
The linear velocity v(t) = 1 m/s
The position Emily is riding = 1/3 the distance from the center
The rotational velocity = 2 RPM = 2 Revolutions per minute
The formula for angular velocity, ω is given as follows;
ω = θ/t
Where;
θ = The angle rotated
t = The time taken for the rotation
Given that the rotational velocity = 2 RPM
1 revolution = 2·π radians
The angular velocity, ω = 2×π×(2 RPM) = 4·π rad/min = 4·π/60 rad/seconds
ω = 4·π/60 rad/seconds
The linear velocity, v = r₁×θ/t = r₁×ω
Where;
r₁ = 1/3 × r
v = 1 m/s = 1/3 × r × 4·π/60 rad/seconds
∴ r = 1/(1/3 × 4·π/60) = 45/π meters
r = 45/π meters
Therefore her linear velocity, v₂ and her rotational velocity if she moves to the outer edge will be given as follows;
v₂ = r × ω = 45/π × 4·π/60 = 3 m/s
Her linear velocity on the outer edge, v₂ = 3 m/s
Her rotational velocity, remains at 2 RPM.
Two identical cars are driving along the motorway. Car A is travelling at 50 km/h and Car B is travelling at 80km/h. Which car has the most drag acting on it?
Answer:
i think it is car B because the greater the speed, the greater the drag force acting on the vehicle
Explanation:
Math Practice: Cart A loaded with blocks (600g) moving left at 0.7m/s hits stationary cart B (200g).
After the collision, both carts move left, Cart A at speed 0.27m/s.
What is the velocity of cart B after the collision? Show your work.
Answer:
The velocity of cart B after the collision is 1.29 m/s.
Explanation:
We can find the velocity of cart B by conservation of linear momentum:
[tex] p_{i} = p_{f} [/tex]
[tex] m_{A}v_{A_{i}} + m_{B}v_{B_{i}} = m_{A}v_{A_{f}} + m_{B}v_{B_{f}} [/tex]
Where:
[tex]m_{A}[/tex] is the mass of cart A = 600 g = 0.6 kg
[tex]m_{B}[/tex] is the mass of cart B = 200 g = 0.2 kg
[tex]v_{A_{i}}[/tex] is the inital velocity of cart A = 0.7 m/s
[tex]v_{A_{f}}[/tex] is the final velocity of cart A = 0.27 m/s
[tex]v_{B_{i}}[/tex] is the initial velocity of cart B = 0
[tex]v_{B_{f}}[/tex] is the final velocity of cart B =?
Taking the left direction as the positive horizontal direction:
[tex] 0.6 kg*0.7 m/s + 0 = 0.6 kg*0.27 m/s + 0.2 kg*v_{B_{f}} [/tex]
[tex] v_{B_{f}} = 1.29 m/s [/tex]
Therefore, the velocity of cart B after the collision is 1.29 m/s.
I hope it helps you!
in the movie "gravity" - Why did the escape pod get stuck and pulled back?
Answer:
because nono gravity
Explanation:
no gravity
4. How many neutrons are there in an atom of protium? Deuterium? Tritium?
P
compare and contrast the strength of the forces between two objects with a mass of 1kg each, a charge if 1 C, and at a distance of 1m from each other.
Answer:
force and mass sorry i dont clear
Explanation:
A high-speed train in Japan travels a distance of 300. kilometers in 3.60 x 103 seconds. What is the average speed of this train? (Turn the time into hours by using a unit conversion)
Answer:
The average speed is 83.3 m/s
Explanation:
What is a free electron? Can someone help?
How much time will it take for a truck to travel 20 meters if it is traveling at 4 m/s?
Answer:
The answer is 5 sExplanation:
The time taken can be found by using the formula
[tex]t = \frac{d}{v} \\ [/tex]
d is the distance
v is the velocity
From the question we have
[tex]t = \frac{20}{4} \\ [/tex]
We have the final answer as
5 sHope this helps you
Two balls have the same mass. One ball moving along the positive x–axis and the other ball moving along the positive y–axis undergo perfectly inelastic collision. What can you say about the motion of the balls after the collision?
A.
The balls stick and move together.
B.
The balls separate immediately.
C.
The first ball stops while the other ball starts moving.
D.
The two balls travel off in opposite directions, 180° apart.
Answer:
A. The balls stick and move together.
Explanation:
When a bodies undergo perfectly inelastic collision, the two bodies stick together after the collision and begins to move.
In this collision, kinetic energy is not conserved. For perfectly elastic collision, the two bodies conserve kinetic energy and begin to move apart.
Kinetic energy is not conserved because some of the energy gets converted into other forms of energy.
Velocity is nothing more than speed
with direction.
True
false
Answer:
False
Explanation:
velocity is more important than speed
Velocity is defined as the speed with direction.
This statement is true.
Velocity is different from speed look below at the differences.
Differences between speed and velocity:Speed is defined as the ratio between distance over time while velocity is given as the ratio of displacement i.e. speed with direction over time.
Example: Velocity is the rate of motion, speed, or action. An example of velocity is a car driving at 75 miles per hour in the north direction.
Thus, the given statement is true.
Find more information about Velocity here:
brainly.com/question/4931057
A net force of 10.N accelerates an object at 5.0 m/s^2. What net force would be required to accelerate the same object at 1.0 m/s^2?
A.) 1.0 N
B.) 5.0 N
C.) 50. N
D.) 2.0 N
Answer:
I believe the answer is 2.0
Explanation:
The net force that would be required is 2 N
From the question,
We have that
A net force of 10 N accelerates an object at 5.0 m/s².
To determine the net force that would be required to accelerate the same object at 1.0 m/s²,
First, we will determine the mass of the object
From the Newton's second law of motion, we have that
F = ma
Where F is the force
m is mass
and a is acceleration
From the given information
F = 10N
a = 5.0 m/s²
Putting the above parameters into the formula, we get'
10 = m × 5.0
∴ m = 10 ÷ 5.0
m = 2 kg
∴ The mass of the object is 2kg
Now,
For the net force that would be required to accelerate the same object at 1.0 m/s²,
Using the same formula
F= ma
Here,
a = 1.0 m/s²
and m = 2 kg
∴ F = 2 × 1
F = 2 N
Hence, the net force that would be required is 2 N
Learn more here: https://brainly.com/question/19060916
What is the average amount of time an American spends consuming media in a week?
A. 10 hours
B. 18 hours
C. 22 hours
D. 28 hours
Please collect the best answer from the choices provided
HURRY!!
Answer: D. 28 hours
Explanation: on edge 2020 :))
The average amount of time an American spends consuming media in a week is 28 hour.
What is Media?Media is the plural form of medium, which (broadly speaking) describes any channel of communication. This can include anything from printed paper to digital data, and encompasses art, news, educational content and numerous other forms of information.
The average amount of time an American spends consuming media in a week is 28 hour.
To learn more about media refer to the link:
brainly.com/question/14047162
#SPJ6
Write one example situation of Newton's Third Law involving mass that are the same.
Answer:
Examples of Newton's third law of motion are ubiquitous in everyday life. For example, when you jump, your legs apply a force to the ground, and the ground applies and equal and opposite reaction force that propels you into the air. Engineers apply Newton's third law when designing rockets and other projectile devices.
Pls I need help ASAP
Answer:
i dont undertsnad what do u ned hep wit?
Explanation:
Choose all the answers that apply.
Check all the statements that are correct.
An independent variable is the variable which is changed.
The dependent variable is the variable which is observed as a result of the change.
If data can be repeated, it cannot be trusted.
Experiments are usually published to communicate findings to the scientific community.
Disproving a hypothesis means it cannot be tested again.
Answer: An independent variable is the variable which is changed. Experiments are usually published to communicate findings to the scientific community.
Disproving a hypothesis means it cannot be tested again.
Explanation: i hoped that helped.
Write an equation of the line in slope-intercept form.