The Periodic table below shows major regions in different colors. In this periodic table, which type of element is shown in green boxes?

The Periodic Table Below Shows Major Regions In Different Colors. In This Periodic Table, Which Type

Answers

Answer 1

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The Correct choice is~ B

The elements shown in green boxes are ~ Metalloids


Related Questions

PLEASE ANSWER ASAP!!!
The movement of tectonic plates in two different locations is shown below:

Two blocks labeled Location A and Location B are shown. The block labeled A has a vertical line in the middle. On the left of the line there is an arrow pointing down. On the right of the vertical line there is an arrow pointing up. At Location B the top layer of the block shows two horizontal arrows pointing towards each other. The portion of this block on the right is shown moving down.
Which statement is most likely true?

Subduction occurs in both locations.

The magnetic orientation of rocks may change in Location A and subduction occurs in Location B.

Subduction occurs in Location A and the magnetic orientation of rocks may change in Location B.

Answers

Answer: its a and b

Explanation:its very simple and the reason is bc yea

Answer:

B

Explanation:

The answer is B because it said subduction i guess. And I got it right! Hope this helps to anyone that is looking at this!

what is the chemistry

Answers

Answer:

physical science

According to 2 sources

Chemistry is a physical science Chemistry is typically considered a physical science, as defined by the Encyclopedia Britannica, because the study of chemistry does not involve living things. Most of the chemistry involved in research and development, such as making new products and materials for customers, falls within this purview.

Explanation:

PA BRAINLIEST

HOPE IT HELPS

A mixture of two gases with a total pressure of 2.78 atm contains 0.70 atm of Gas A. What is the partial pressure of Gas B in atm

Answers

Answer:

2.08 atm

Explanation:

Here we use Dalton's Law of Partial Pressures: Pa+Pb=Ptotal. 0.70 atm + Pb = 2.78 atm. To find the missing pressure of gas b we subtract .7 from the 2.78

a peanut butter and jelly sandwich contains 9.00 g of fat, 6.00 g of protein, and 25.0 g of carbohydrate. How many calories does this sandwich provide?

Answers

Answer:

205 calories.

Explanation:

According to the USDA, "Carbohydrates provide 4 calories per gram, protein provides 4 calories per gram, and fat provides 9 calories per gram." 9 grams of fat at 9 calories per equals 81 calories + 6 grams of protein at 4 calories per gram which equals 24 calories + 25 grams of carbohydrate at 4 calories per gram which is equal to 100 calories.

Total that all up and you get 81 cal + 24 cal + 100 cal=205 calories.

I don't know what kind of course this is for, but if they are incredibly picky, what we refer to as "calories" are actually kilocalories, which are equal to one thousand "real" calories each. However, I'm very confident that the correct answer is 205 calories.

The sandwich will provide 205 calories.

What is calories?

A calorie is an energy unit. It's the quantity of heat needed to increase the temperature of one gramme of water by [tex]1^{0} C[/tex] at one atmosphere of pressure.

Its is given that, Fat = 9 g, protein = 6 g, carbohydrate = 25 g.

It is known that, fat contains 9 calories / gram , carbohydrate contains 4 calories / gram and protein contains 4 calories / gram.

Now, adding all terms.

Total calories = (9×9) +(6×4) +(25×4)

= 205 calories.

Therefore, the sandwich will provide a total of 205 calories.

To know more about calories

https://brainly.com/question/22374134.

#SPJ2

4. The half-life of C-14 is 30 years. If a scientist had 100.0 g at the beginning, how
many grams would be left after 120 years has elapsed?
Half Lives
0
1
2
Time (years)
Amount (grams)
Show table

Answers

Answer:

6,25 gm

Explanation:

4. The half-life of C-14 is 30 years. If a scientist had 100.0 g at the beginning, how

many grams would be left after 120 years has elapsed?

10 years would be 120/30 = 4 half lives0

s0 the fraction of c-14 left would be four (1/2) multiplied together

1/2 X 1/2 X 1/2 X 1/2 = 1/16

SO 1/16 OF THE 100.0 gm would be left

100.0/16  = 6,25 gm

Very easy science 5th grade WILL MARK As brain list if owned by today

Answers

Answer:

A

Explanation:

According to the chart, A tv turns into heat, light, and sound energy.

A 32.1 mole sample of gas has a temperature of 21 Celsius and a pressure of 2280.0 torr. What is the volume of the gas?

Answers

The volume of the gas is 27 ml

The calculation can be done as follows

The first step is to convert the pressure to atm

convert 2280 tors to atm

760 tors= 1 atm

= 2280/780

= 3 atm

The formula is

PV= nRT

The next step is to write out the parameters

Pressure= 3 atm

Temperature= 21 °C

no of moles= 32.1 mole

volume= ?

(r)constant= 8.314

3 × v= 32.1×8.314×21

3v= 81.080

V= 81.080/3

V= 27 ml

Hence the volume of the gas is 27 ml

Please see the link below for more information

https://brainly.com/question/15568262?referrer=searchResults

What is epoxy?
………………..

Answers

Answer:

Epoxy is the family of basic components or cured end products of epoxy resins.


Any of a class of adhesive plastics or other materials that are polymers of epoxides

Calculate the amount of energy That an obsect Can absorb from Yellow light Whose wave length is 589 nm.​

Answers

Explanation:

E = hf

c= f × lamda

f= c/ lamda

c= speed of light

f= frequency

lamda = wavelength

E = h c/ lamda

E = 6.626 × 10^-34 Js × 3 × 10^8 ms-1 / 589 × 10^-9 m

= 3.37 × 10^15 J

A chemical reaction occurs when _________.

A. Chemical Bonds are build
B. A new substance is created
C. Chemical Bonds are broken
D. All of the Above

Answers

Answer:

C. Chemical Bonds are broken

Explanation:

A chemical reaction occurs when chemical bonds are broken.

Chemical reactions occur when chemical bonds between atoms are formed or broken.

Hope this helps :)

Answer:

c: chemical bonds are broken

Explanation:

the broken bonds then create new bonds, rearranging the atoms into a new substance :)

11)
is the large-scale farming that mass-produces crops and livestock.
a) Organic farming
b) Industrial farming
c) Chemical farming

Answers

Answer:

b) Industrial farming

Explanation:

The term “industrial agriculture” refers to the type of farming which raises and cultivates large numbers of livestock and plants in high-density environments. It uses modern technology to promote faster growth and reduce illness and death rates in livestock, creating food products on a mass scale.

Answer: B.

Explanation

industrial agriculture

brainliest me

dentify the parts of the atom that are labeled in the diagram.

Answers

Answer:

Our current model of the atom can be broken down into three constituents parts – protons, neutron, and electrons. Each of these parts has an associated charge, with protons carrying a positive charge, electrons having a negative charge, and neutrons possessing no net charge.

What do we call the repeating units of a larger molecule?

Answers

Answer:

Brainlest

Explanation:

A polymer is a molecule made up of repeating units. These units, called “monomers”, form a long molecular chain. It might have branches, or it might just be one straight line of molecules, each connected in the same way. A monomer of polyethylene

Which one of the following salts has the highest molar solubility in water?

Answers

Answer:

Correct option is

C

Ag

2

CO

3

; K

sp

=6.2×10

−12

(A) For CaCO

3

,S=

Ksp

=

8.7×10

−9

=9.3×10

−5

M

(B) For CuS,S=

Ksp

=

8.5×10

−45

=9.2×10

−23

M

(C) For Ag

2

CO

3

,S=(Ksp/4)

1/3

=(6.2×10

−12

/4)

1/3

=1.15×10

−4

M

(D) For Pb(IO

3

)

2

,S=(Ksp/4)

1/3

=(2.6×10

−13

/4)

1/3

=4×10

−5

M

Hence, Ag

2

CO

3

has the greatest molar solubility in pure water.

True or false?

Increasing the temperature can help slow down chemical reactions by "burning away" unnecessary molecules

Answers

True because increasing the temperature it gets hotter

How much heat is required to increase the temperature of 150 g of water from
38°C -55°C?

Answers

Answer:

-55°C

Explanation:

Bwcause 38°C is gonna make it colder so thats why you should use that.

(50 POINT) use this to answer: https://phet.colorado.edu/sims/html/acid-base-solutions/latest/acid-base-solutions_en.html

Describe how you could adjust the settings of the simulation to increase the number of red (H3O+) and blue (A-) particles in the solution of equilibrium. In three to four sentences, justify your answer and explain how and why this would change the pH of the solution.

Answers

The addition of more acid or base will increase the number of H3O+ and A- particles thereby decreasing and increasing the pH of the solution respectively.

What is an acid-base titration?

An acid-base titration is one in which an acid is added to a given volume of base in order to neutralize it.

When more of acid is added to a solution of a base than is required to neutralize it, the solution becomes acidic.

Similarly, when more base is use to neutralize an acid than is required, the solution becomes alkaline.

In the given simulation, (H3O+) is the acid while (A-) is the base.

By adding increasing the quantity of acid added, the number of H3O+ particles will increase. This will reduce the pH of the solution.

Also, the adding more base to the solution, the number of A- particles in the solution will increase. This will increase the pH of the solution.

Therefore, addition of more acid or base will increase the number of H3O+ and A- particles thereby decreasing and increasing the pH of the solution respectively.

Learn more about acid-base titration at: https://brainly.com/question/3508933

PLEASE HELP
1. A closed bottle contains a mixture of Ar and O2 at 25.3°C. If the partial pressure of Ar in
the bottle is 0.447 atm and the total pressure of the bottle is 1.024 atm, what is the partial
pressure of O2 in the bottle?

Answers

Answer: 0.79 atm

Explanation:

The Ideal Gas Law is PV=nRT.

since both Ar and O2 have the same volume and temperature, the only variable causing the differnce in pressure betwwen the 2 gases is the number of moles

the total pressure = the partial pressure of Ar + the partial  pressure of O2

1.024 atm = 0.447 amt + ?

so  

? = 1.24 -0,447 = 1.24 - 0.45= 0.79 atm

the total pressure of the bottle is 1.024 atm, what is the partial

pressure of O2 in the bottle? is PV

Calculate the mass of 5.3 moles of chloric acid (HClO3). Explain the process or show your work by including all values used to determine the answer.

Answers

Answer:

447.64 grams

Explanation:

To find the mass when given moles, it is a pretty simple process.

I start by finding the molar mass of chloric acid, which comes out to 84.46 grams/mol. To find the MM (molar mass), you just take the mass of each element in the molecule from the periodic table and add them all together.

After this, you set up the equation by taking the moles given and multiplying it by the molar mass. This gives you the new value in grams (since we cancelled out the moles). I have attached my work below.

I hope this helps! :^)

The mass of 5.3 moles chloric acid has been 447.85 g.

The mass of 1 mole of a compound has been equivalent to the molar mass of the compound. The molar mass of a compound has been the sum of the constituent atoms in a formula unit.

The molar mass (mwt) of chloric acid has been given as:

[tex]mwt=m_H\;+\;m_C_l\;+\;(m_O\;\times\;3)[/tex]

By substituting the values for the mass of constituent atoms, the molar mass has been given as:

[tex]mwt=1\;+\;35.5\;+\;16\;\times\;3\\mwt=36.5\;+\;48\\mwt=84.5[/tex]

The molar mass of chloric acid has been 84.5 g/mol.

The mass of 1 mole of chloric acid has been 84.5 g/mol. The mass of 5.3 moles chloric acid has been:

[tex]\rm 1\;mol=84.5\;g\\5.3\;mol=5.3\;\times\;84.5\;g\\5.3\;mol=447.85\;g[/tex]

The mass of 5.3 moles chloric acid has been 447.85 g.

For more information about molar mass, refer to the link:

https://brainly.com/question/12127540

list several characteristics of ligroin​

Answers

- Petroleum fraction consisting mostly of [tex]C_{7}[/tex] and [tex]C_{8}[/tex] hydrocarbons

- The fraction is also called heavy naphtha

- Boiling in the range 90‒140 °C

- Ligroin is used as a laboratory solvent

- Ligroin it also esed as a motor fuel or as a solvent for fats and oils in dry cleaning

         [] All of these are different characteristics of ligroin​

         [] If you need more let me know  

Have a nice day!

     I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

Suppose you are performing a titration. At the beginning of the titration, you read the titrant volume as 2.51 mL. After running the titration and reaching the endpoint, you read the titrant volume as 29.95 mL. What volume, in mL, of titrant was required for the titration

Answers

The volume of titrant required for the titration would be 27.44 mL

From the illustration, the initial titrant volume was 2.51 mL. This figure represents the initial reading on the burette.

In the same vein, the final volume of the titrant was 29.95 mL. This figure represents the final reading on the burette.

In order to get the volume of titrant used:

Volume of titrant used = final volume - initial volume

                             = 29.95 - 2.51

                                = 27.44 mL

More on the volume of titrant used in titrations can be found here: https://brainly.com/question/4250180

4. A student performs four trials of an investigation to determine the boiling point of water. How should the student handle the results?
A. The student should take the average of the minimum and maximum value of the results.
B. The student should use the value that is closest to 100ºC.
C. The student should use the maximum value of the results.
D. The student should take the average of the results from all four trials.

Answers

Answer:

i think its D

Explanation:

In order to get maximum accuracy, student should take average of results from all four trials.

What is accuracy?

Accuracy  in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:

1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.

2)Percentage of true value--It is the accuracy  which is determined by identifying accuracy of the instrument  and comparing it with the measured true value.

3)Percentage of scale range- It is the accuracy  which determines accuracy of the measurement.

Accuracy in case of instruments  is neglected up  to ±0.5 percent.Accuracy of measurements can be increased by taking multiple measurements and taking into account human errors.

Learn more about accuracy,here:

https://brainly.com/question/15276983

#SPJ2

Hey :3 please help with this. Will mark brainlist if you’re right

Answers

Answer: 4

Explanation:

The table below provides data about a gas sample. Which of the following can be determined using the data?
Volume 2.0 L
Pressure 3.6 atm
Temperature 323 K
the chemical composition of the gas
the condensation temperature of the gas
the number of moles in the sample
the distance between gas molecules in the sample

Answers

Explanation:

Tabel di bawah ini memberikan data tentang sampel gas. Manakah dari berikut ini yang dapat ditentukan dengan menggunakan data? Volume 2,0 L Tekanan 3,6 atm Suhu 323 K komposisi kimia gas suhu kondensasi gas jumlah mol dalam sampel jarak antar molekul gas dalam sampel

Explanation:

....

해바라기해바라기해바라기해바라기

What happens to iron in a bolt as the bolt rusts?
A. It undergoes a chemical change.
O B. It undergoes a physical change
O C. The mass of the atoms decrease
O D. It changes into a different element.
a

Answers

Answer:

it undergoes a chemical change

Help please With this :)))

Answers

Answer: 3

Explanation:

Recreational drug users often obtain the drug as a white powder with unknown purity. Some users snort the power, whereas others make a solution and take it orally or inject it. To achieve a ketamine high, users usually need to take between 0.1 mg/kg and 1 mg/kg of ketamine. However, taking 2 mg/kg can lead the user to experience a K-hole or to enter an unconscious state.

If the user dissolves exactly 1 g of ketamine in 1/4 cup of water, what is the concentration of ketamine in milligrams per milliliter (mg/mL)? 1 cup=236.5 mL
What volume, in milliliters, of the recreational ketamine in the previous question would a 59.0 kg user need to take to experience a high at 0.600 mg/kg?
How many milliliters would that same user need to take to become unconscious at 2.00 mg/kg?

Answers

If a user dissolves exactly 1 g of ketamine in 1/4 cup of water, the resulting concentration is 16.91 mg/mL. A 59.0 kg user would have to consume 2.09 mL of this solution to experience a high of 0.600 mg/kg. The same user would have to consume 6.98 mL of this solution to become unconscious at 2.00 mg/kg.

Part 1

A user dissolves exactly 1 g of ketamine in 1/4 cup of water.

Given 1 cup = 236.5 mL, the volume of 1/4 cup of water is:

1/4 cup × (236.5 mL/1 cup) = 59.13 mL

1 g of ketamine is dissolved in 59.13 mL of water. The concentration of ketamine, in mg/mL, is:

C = 1000 mg / 59.13 mL = 16.91 mg/mL

Part 2

The volume of this solution that a 59.0 kg user (body mass) would have to consume to experience a high at 0.600 mg/Kg is:

[tex]59.0 kgBM \times \frac{0.600mgKetamine}{1kgBM} \times \frac{1mL Soluiton}{16.91mgKetamine} = 2.09 mL[/tex]

Part 3

The volume of this solution that a 59.0 kg user (body mass) would have to consume to become unconscious at 2.00 mg/kg is:

[tex]59.0 kgBM \times \frac{2.00mgKetamine}{1kgBM} \times \frac{1mL Soluiton}{16.91mgKetamine} = 6.98 mL[/tex]

If a user dissolves exactly 1 g of ketamine in 1/4 cup of water, the resulting concentration is 16.91 mg/mL. A 59.0 kg user would have to consume 2.09 mL of this solution to experience a high of 0.600 mg/kg. The same user would have to consume 6.98 mL of this solution to become unconscious at 2.00 mg/kg.

Learn more about concentration units here: https://brainly.com/question/14594475

An unknown hydrocarbon compound was analyzed for hydrogen by elemental analysis and results show that it contains 15.88 % H. What is the empirical formula

Answers

Answer:

C4H9

Explanation:

If H = 15.88%

Then C = 100.00 – 15.88 = 84.12

Divide each % value by respective atomic mass

H = 15.88/1 = 15.88

C = 84.12/12 = 7.01

Divide through by smaller value

H = 15.88/7.01 = 2.26

C = 7.01/7.01 = 1

Remove fraction , multiply by 4

H = 9

C = 4

Empirical formula = C4H9

The hydrocarbon could be ( C4H9)2 = C8H18 = octane.

How many moles of NH3 can be produced from 5.50 moles of nitrogen in the following reaction: N2+3H2=2NH3

Answers

Answer:

Explanation:

Let the molar balance numbers be your guide.

N2 has  a one in  front of  it.

2 NH3 has a two in front of it.

Nitrogen has 5.50 moles given.

1 / 5.50 = 2 / x                 Cross multiply

1 x  = 2 * 5.50

x = 11.0

So if you use 5.5 moles of nitrogen, you get 11 moles of NH3

Ethanol (C₂H₆O) is combusted in air according to the following reaction: C₂H₆O(l) + O₂(g) → CO₂(g) + H₂O(l) How many moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen?

Answers

2.89 moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen.

According to this question, the following reaction between ethanol and oxygen is given:

C₂H₆O(l) + O₂(g) → CO₂(g) + H₂O(l)

However, this equation is not balanced. The balanced equation is as follows:

C₂H₆O + 3O₂ → 2CO₂ + 3H₂O

According to this equation, 1 mole of ethanol produces 3 moles of water.

We convert 44.5g of ethanol to moles by dividing by its molar mass as follows:

mole = 44.5g ÷ 46.07g/mol

mole = 0.966mol of ethanol

If 1 mole of ethanol produces 3 moles of water.0.966mol of ethanol will produce (0.966 × 3) = 2.89mol

Therefore, 2.89 moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen.

Learn more at: https://brainly.com/question/21085277?referrer=searchResults

Other Questions
In a lab, a substance was cooled by 20 C over a period of 10 hours at a constant rate. What was the change in temperature each hour? Sullivan Equipment Sales showed the following.2020 Jan.15 Sold $25,200 of merchandise for $29,400 to JanCo; terms 3/5, n/15. 16 Wrote off Feduns account in the amount of $15,200. 20 Collected the amount owing from the January 15 sale.Mar.1 Accepted a $12,080, 60-day, 7% note dated this day in granting Parker Holdings a time extension on its pastdue account.Apr.15 Sold merchandise costing $62,200 for $71,400 to customers who used their Visa credit cards. Visa charges a 1% fee and deposits the cash electronically into the retailers account immediately at the time of sale. ? Parker Holdings honoured the note dated March 1.Nov.1 Accepted a $24,400, three-month, 6% note dated this day in granting Grant Company a time extension on its past-due account.Dec.31 Sullivans year-end. Interest was accrued on outstanding notes receivable. 31 Bad debts are based on an aging analysis that estimated $9,700 of accounts receivable are uncollectible. Allowance for Doubtful Accounts showed an unadjusted credit balance of $1,620 on this date.2021 ? Grant Company dishonoured its note dated November 1, 2020.Mar.5 Recovered $1,500 from Derek Holston that was previously written off. 14 Wrote off the Grant Company account.Required:a. Determine the maturity dates of the March 1 and November 1 notes.b. Prepare entries as appropriate for each date. (Round the final answers to 2 decimal places. Use 365 days an year.)Sullivans receivable turnovers at December 31, 2020 and 2021 were 7 and 7.5, respectively. Select the correct option for whether the change in the ratio for Sullivan was favourable or unfavourable. please help me:((( i need help! convert 120 mm to feet A machine paints 340 toy boats in 45 minutes. Which expression equals the unit rate per minute? who is considered the most important person in the early spread of christianity to non-jews as well as jews? jessie works in an electronics store and earns a 7.5% commission on every item that she sells. How much commission would she earn for selling a computer that costs $1,580? Which group of Barbarians invaded the city of Rome from North Africa? plzz help me cant remember the parts of the flower. For each table, write the equation that represents the price per ticket. g Let x=(5,2,4)Tx=(5,2,4)T and y=(3,3,2)Ty=(3,3,2)T. Compute xy1,xy2xy1,xy2, and xy[infinity]xy[infinity]. Under which norm are the two vectors closest together? Under which norm are they farthest apart? Which of the following is not a special feature of the foreign exchange rate market. How many (A) restaurants are (B) there in your town? Oh! There is (C) a lot but only two famous ones (D). If answered correct you will be MARKED BRAINLIEST if i can get 3 snapple Iced tea. and its 3 for $6 How would it be if i get 2 snapple Iced tea?explain When a program unit refers to other database objects, the program unit is considered dependent on that object. What is true about radioactive isotopes of an atom?They do not break down.They break down quicker than stable isotopes.They undergo radioactive decay to form larger isotopes.They break down to form heavier isotopes. 2. According to the graph below, what temperature will result in the highest rate of photosynthesis?1004 Oxygen flow (ml)8050402000Temperature (1)5010203040O A 5COB. 40CO C.30CO D. 25C translate the sentence into a equation using n as the unknown number . Then solve the equation for n . 5 increased by half a number is 11 Need to prove that there are as many leadership styles as there are many people