The metallic character of an element is defined as the properties typical of a metal, especially the tendency to lose electrons in chemical reactions.
Arrange the following elements in order of decreasing metallic character.
P, Zn, Cr, Cs, F, S, Ca
Rank from most to least metallic character. To rank items as equivalent, overlap them.

Answers

Answer 1

Answer:

Rb, Zn, P, S, F, Ca, Co, Cr

Answer 2

Rb, Zn, P, S, F, Ca, Co, Cr elements in order of decreasing metallic character.

What is a metallic character?

The metallic character of an element is defined as the properties typical of metal, especially the tendency to lose electrons in chemical reactions.

Metallic character depends on the ability of an element to lose its outer valence electrons. Examples of properties related to metallic character include thermal and electrical conductivity, metallic lustre, hardness, ductility, and malleability. The most "metallic" element is francium, followed by caesium.

Hence, Rb, Zn, P, S, F, Ca, Co, and Cr elements in order of decreasing metallic character.

Learn more about the metallic character here:

https://brainly.com/question/25500824

#SPJ2


Related Questions

How many moles of Mg are needed to react with 20 mol O2?

Answers

I feel like it would be O.40 mol Mgo but I could be wrong
it requires 2 moles . yeah 2 moles

Calculate the molarity of a solution prepared by diluting 165 mL of
0.700 M calcium chloride to 900.0 mL.

Answers

Answer:

The product of transcription is RNA, which can be encountered in the form mRNA, tRNA or rRNA while the product of translation is a polypeptide amino acid chain, which forms a protein.

Explanation:

What gas was produced by the reaction of zinc and HCl? How did this gas behave in the presence of fire?

Answers

Answer:

The gas that was produced by the reaction of zinc and hydrochloric acid was Hydrogen gas and zinc chloride. In the presence of fire, hydrogen explodes with a popping sound. The popping sound put out the flame.

When Zn is reacts with HCl then generating tiny hydrogen bubbles as well as creating zinc chloride [tex]ZnCl_{2}[/tex] (zinc chloride).

What is hydrogen bubbles?

A process known as the hydrogen bubble procedure electrolyzes conductive water containing acid / base to produce hydrogen bubbles.

What is [tex]ZnCl_{2}[/tex] (zinc chloride)

[tex]ZnCl_{2}[/tex] (zinc chloride) will be formed by the reaction between the Zn (Zinc) and Cl (chlorine).

It can be written as:

[tex]Zn +Cl_{2}[/tex] → [tex]ZnCl_{2} +H_{2}[/tex].

Hence, [tex]ZnCl_{2}[/tex] (zinc chloride) and hydrogen gas will be formed during the reaction.

To know more about hydrogen bubbles.

https://brainly.com/question/12708099

#SPJ3

A containing vessel holds a gaseous mixture of nitrogen and butane. Thepressure in the vessel at 126.9 Cis 3.0 atm. At 0 C, the butane completelycondenses and the pressure drops to 1.0 atm. Calculate the mole fraction of nitrogenin the original gaseous mixture.

Answers

A vessel that contains a mixture of nitrogen and butane has a pressure of 3.0 atm at 126.9 °C and a pressure of 1.0 atm at 0 °C. The mole fraction of nitrogen in the mixture is 0.33.

A vessel contains a gaseous mixture of nitrogen and butane. At 126.9 °C (400.1 K) the pressure is due to the mixture is 3.0 atm.

We can calculate the total number of moles using the ideal gas equation.

[tex]P \times V = n \times R \times T\\\\n = \frac{P \times V}{R \times T} = \frac{3.0 atm \times V}{0.082 atm.L/mol.K \times 400.1 K} = 0.091 mol/L \times V[/tex]

At 0 °C (273.15 K), the pressure due to the gaseous nitrogen is 1.0 atm.

We can calculate the moles of nitrogen using the ideal gas equation.

[tex]P \times V = n \times R \times T\\\\n = \frac{P \times V}{R \times T} = \frac{1.0 atm \times V}{0.082 atm.L/mol.K \times 400.1 K} = 0.030 mol/L \times V[/tex]

The mole fraction of nitrogen in the mixture is:

[tex]X(N_2) = \frac{0.030 mol/L \times V}{0.091 mol/L \times V} = 0.33[/tex]

A vessel that contains a mixture of nitrogen and butane has a pressure of 3.0 atm at 126.9 °C and a pressure of 1.0 atm at 0 °C. The mole fraction of nitrogen in the mixture is 0.33.

Learn more: https://brainly.com/question/2060778

1.) animal______is the structure or behavior that helps animals to survive in their environment

2.)fish have ______for breathing

3.)animals that live in water called_______

and the photo​

Answers

Answer:

1 Adaptation

2 Gills

3 Aquatic

Phản ứng phân hủy của 1 este trong môi trường kiềm: RCOOR’ + NaOH → RCOONa + R’OH
Để một nửa lượng ban đầu của RCOOR’ và NaOH chuyển thành sản phẩm ở 270C cần thời gian là 200
phút. Hỏi ở 570C cũng để chuyển một nửa lượng ban đầu của RCOOR’ và NaOH thành sản phẩm thì cần
bao nhiêu phút? Cho biết hệ số nhiệt độ của phản ứng trên  = 2,8.

Answers

is this in a different language??

An ideal solution consisting of 79 wt% benzene (C6H6) and 21 wt% toluene (C7H8) was heated in a closed vessel to 50 ºC. What is the mole fraction of benzene in the vapour phase when equilibrium was reached at 50 ºC? Round your answer to two significant figures.



Data: Vapour pressure of benzene at 50 ºC = 271 mmHg

Vapour pressure of toluene at 50 ºC = 91.5 mmHg

Answers

In this case, according to the Raoult's law, we can find the mole fraction of 79 wt% benzene and 21 wt% toluene at 50 °C in the vapor phase as follows:

[tex]y_iP=x_iP_i[/tex]

However, we first have to calculate the mole fractions in the solution as follows (b stands for benzene and t for toluene):

[tex]\\x_b=0.79\frac{g\ benzene}{g\ solution} *\frac{(78.11*x_b+92.14*x_t)}{1mol\ solution} *\frac{1mol\ toluene}{78.11g\ toluene} \\\\x_b=0.79\frac{g\ benzene}{g\ solution} *\frac{78.11*x_b+92.14*(1-x_b)}{1mol\ solution} *\frac{1mol\ toluene}{78.11g\ toluene}\\\\x_b=0.79*(x_b+1.18*(1-x_b))\\\\x_b=0.79x_b+0.932-0.932x_b\\\\x_b=\frac{0.932}{1+0.932-0.79} =0.816\\\\x_t=1-x_b=1-0.816=0.184[/tex]

Next, we calculate the total pressure as follows, according to the Dalton's law:

[tex]P=x_bP_b+x_tP_t=0.816*271mmHg+0.184*91.5mmHg=237.972mmHg[/tex]

Finally, the mole fractions of the vapor phase turn out:

[tex]y_b=\frac{0.816*271mmHg}{237.972mmHg}=0.929\\\\y_t=1- 0.929=0.071[/tex]

Learn more:

https://brainly.com/question/12718562https://brainly.com/question/17581597

Which ion with a
+2
charge has the electron configuration
1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6?

Answers

Answer:

atomic # 38 or strontium (Sr)

Explanation:

Which ion with a

+2charge has the electron configuration

1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6?

ADD THE ELECTRONS AND ADD 2 MORE  FOR THE +2 CHARGE

so

2 +2 +6 +2 +6 +2 + 10 +  6 +2  

so if it is now neutral (you added 2 e's to ofsetr the +2 charge) it has 38

protons, so it is atomic # 38 or strontium (Sr)

what do we call the cammell their​

Answers

Answer:

You have to write the full question

If acid comes in contact with your skin, why must you flush the area with plenty of cold water, rather than neutralizing the acid with a base?

Answers

Answer:

that would just create a bigger mess if you flush it with ice water it can reduce swelling and help dull your nerves

Explanation:

If acid comes in contact with your skin, because having an excessive amount of base can also be harmful. Acid is weakened and rendered ineffective by water.

What is acid?

A chemical species known as an acid absorbs electrons and/or provides protons or hydrogen ions. When a hydrogen atom is bound to an acid, it can release (dissociate) and produce a cation as well as an anion in water. A substance's acidity and solution pH increase according to the amount of hydrogen ions it produces.

There are various definitions for acids. When someone uses the term "an acid," they typically mean an Arrhenius or Brnsted-Lowry acid. Often, a Lewis acid being referred to as a "Lewis acid." If acid comes in contact with your skin, because having an excessive amount of base can also be harmful. Acid is weakened and rendered ineffective by water.

Therefore, if acid comes in contact with your skin, because having an excessive amount of base can also be harmful. Acid is weakened and rendered ineffective by water.

To know more about acid, here:

https://brainly.com/question/29796621

#SPJ3

SIGNIFICANT FIGURES ARE FIGURES WITH

Answers

Answer:

All zeros between other significant digits are significant. The number of significant figures is determined by starting with the leftmost non-zero digit. The leftmost non-zero digit is sometimes called the most significant digit or the most significant figure. For example, in the number 0.004205, the '4' is the most significant figure.

Explanation:

PA BRAINLIEST

HOPE ITS HELP

GOD BLESS

hidrógeno
notacion electronica

Answers

Answer:

Hydrogen

Electronic notation

Explanation:

If a barometer were built using water (d=1.0 g/cm3) instead of mercury (d=13.6 g/cm3), would the column of water be higher than, lower than, or the same as the column of mercury at 1.00 atm? If the level is different, by what factor? Explain.

Answers

Mercury is a compound denser than water and when this happen, it stays lower.

So, in this case, water stays higher than mercury because its density is low.

The level is different by a factor of 13.6 times taller.

Which statement about petroleum fractions is correct?
A. All petroleum fractions are used as fuels.
B. Gas oil is used to make bottled gas for heating.
C. Hydrocarbons in diesel have higher boiling points than hydrocarbons in
gasoline.
D. Molecules in kerosene are larger than molecules in fuel oil.

Answers

Answer: It is either C. or D.

Explanation: I did some reading about it and it talks about fuel but I know that it didn’t say all of them are used as fuels.  maybe I’m wrong

Petroleum is composed of hydrocarbons of various chain length. Different products can be extracted from petroleum but all products cannot be used as fuel.

Hydrocarbons in diesel have higher boiling point than that of gasoline.

What is petroleum?

Petroleum is a naturally occurring crude liquid mixture of hydrocarbons. Petroleum can be fractionated to different components such as gasoline, kerosene, diesel etc.

Each fraction vary in the number of carbons and hydrogens in it or called the difference in chain length. Kerosene contains 8-16 carbons where as gasoline and diesel have more carbons.

Not all products of petroleum fractionation can be used as fuel. Some of them with effective quality is taken as fuels.

The boiling point of hydrocarbons in diesel is greater (about 130-380 degree Celsius) than the hydrocarbons in gasoline which is having boiling point in he range 30-225 degree Celsius.

Therefore, the statement C is correct.

To learn more about petroleum, find the link below:

https://brainly.com/question/4147953

#SPJ5

five differences between true solution and false solution​

Answers

Answer:

k im silly frrr lol have a great day

Consider the following reaction: 2A + 3B --> 2C If you have 2 moles of A and 6 moles of B, what is the maximum number of moles of C that can be made by the reaction

Answers

Answer:

2 moles of C and no more

Explanation:

Consider the following reaction: 2A + 3B --> 2C If you have 2 moles of A and 6 moles of B, what is the maximum number of moles of C that can be made by the reaction

2A + 3B --> 2C '

2 of A make 2 of C if we have atleast 3 of B.

we ave more than enough B

2 of A will make 2 moles of C and no more

The table shows the boiling points of fluorine, chlorine and bromine.
Element
Boiling point in °C
Fluorine
-186
Chlorine
-34
Bromine
+59
(c) Explain why the boiling points in the table are low.

Answers

Explanation:

the chemicals are group 7 elements and one of their characteristics is that the melting and boiling point increase progressively

Stop asking I don’t know

How do weak intermolecular bond strengths affect the melting and boiling point of a substance? (Picture is of answers I can choose from)

Answers

B) Both the melting point and boiling point are lower

This is because weak intermolecular forces need less energy for the forces to break compared to strong intermolecular forces. Less energy required means lower temperatures - low melting and boiling points

For a weak intermolecular bond, both the melting point and boiling point are lower.

A lesser energy is required to break bond of weak intermolecular forces while a greater energy is required to break bond of strong intermolecular forces.

E ∝ T

where;

E is the energy required to break the bondT is the temperature

A lesser energy means a lower temperature and a lower temperature will result in lower boiling point and melting point.

Thus, we can conclude that for a weak intermolecular bond, both the melting point and boiling point are lower.

Learn more here:https://brainly.com/question/14719148

A cylinder contains helium gas with a volume of 2.60 L at 20 C and 768 mm Hg. If the balloon ascends to an altitude where the helium pressure is 614 mm Hg, what is the volume of gas? (Assume the temperature has not changed)

a. 12.2
b. 1.2
c. 20.2
d. 3.2

Answers

Answer: 3.2 [D]

Explanation:

Use Boyles law

(Might want to rotate image, sorry!)

Paano mo mapapanatili na gumagana ang iyong negosyo sa gitna ng pandemic na ito?​

Answers

Tingnan ang pinakamahuhusay na kagawian at patnubay sa pampublikong kalusugan para mapanatiling ligtas ang iyong mga customer at tauhan.

HOPE IT HELPS:)

PLS FOLLOW:)

#BRAINLIEST

Salt is dissolved into a water solvent Can the salt be extracted, and will it retain its properties?

A) No, it cannot be extracted through any means. It does not retain its original properties

B) Yes, it can be extracted through evaporation. It does not retain its original properties

C) Yes, it can be extracted through evaporation. It retains its original properties.

D) No, it cannot be extracted through any means. It retains its original properties.

Answers

When Salt is dissolved into a water solvent; Yes, it can be extracted through evaporation. It retains its original properties: Choice C.

The salt when dissolved in water solvent forms a solution.

They can be separated by boiling the mixture.

The solution formed is a mixture which can be separated by evaporation of water molecules do that the salt is left in the heating chamber.

Read more;

https://brainly.com/question/12827858

Answer:

https://brainly.com/question/24692494

Explanation:

List of answers here

Imagine if Rutherford conducted his scattering experiment, and his prediction about the movement of alpha particles held true Which of the other models or scientific
observations would have also been confirmed?
The Bohr model would have been confirmed because it shows electrons spinning around a nucleus
The plum pudding model would have to be true as well because it shows that electrons are scattered within an atom,
The Bohr model would have been confirmed because it shows electrons occupying random positions inside the electron cloud.
The plum pudding model would have to be true as well because it shows that all positive charge is concentrated at the center of the atom

Answers

Answer:

The plum pudding model would have to be true as well because it shows that electrons are scattered within an atom.

Explanation:

I took the test and got it right :)

The plum pudding model would have to be true as well because it shows that electrons are scattered within an atom

The model of the atom proposed by Rutherford is called the nuclear model of the atom called the nuclear model of the atom. It was proposed after his famous experiment using a thin gold foil.

His previous prediction was that the alpha particles will bend or deflect around the positively charged areas of the gold atom. If this prediction came true, the plum pudding model would have to be true as well because it shows that electrons are scattered within an atom.

Learn more: https://brainly.com/question/25105283

What is the charge on an electron?

Answers

Answer:

Negative Charge

Explanation:

Relate microscopic bonding properties to solid state properties

Answers

There are many factors that we can take into account when attempting to relate microscopic bonding properties to solid-state properties, for example, the rigid and immobile nature of solid states and their molecular bonds.

Solid-state properties are simply put, the properties we can observe and measure when studying an element in solid form. These solids have specific characteristics such as:

Structural rigidityThey do not change shapeDo not change the volume they occupy

and so on, which although not initially obvious, are caused by the microscopic molecular bonds of their atoms.

The microscopic properties of solids are very similar to that of the solid-state properties. The atoms of a solid are very close together and strongly bonded to one another, because of this the atoms form a very rigid structure that resists changes to their shape or volume, much like the macroscopic properties of the solid. This serves to show how these properties may cause the solid-state effects we can observe normally.  

To learn more visit:

https://brainly.com/question/4833954?referrer=searchResults

A bike with mass of 10 kg is moving with a speed of 5 m/s. What is the magnitude of its momentum?​

Answers

Answer:

The momentum is then (10 kg)(5 m/s)= 490.5 kg-m/s

Explanation:

Answer is A

Aluminium reacts with sulfuric acid to form aluminium sulfate and hydrogen. What is the volume of
hydrogen gas in liters (L) produced at 300 K and 1.0 atm pressure, when 5.4 g of aluminium and
50.0 mL of 5.0 M sulfuric acid are combined for the reaction?

Answers

Answer:

[tex]2al + 3h2so4 = > al2(so4)3 + 3h2 \\ eqvt \\ = > \frac{5.4}{27} = > \frac{5 \times 50}{1000} \\ .2 \: mol = > .25 \: mol \\ \\ so \: .25 \: is \: limiting \: reagent \\ according \: to \: ideal \: gas \: equation \\ pv = nrt \\ v = \frac{nrt}{p} \\ v = \frac{.25 \times .082 \times 300}{1} \\ = \frac{1}{4} \times 8.2 \times 3 \\ = 2.05 \times 3 \\ = 6.15litre \\ thank \: you[/tex]

Think about the parts of an egg, and write down why you think it can act as a model of an animal cell. Also write down your predictions of what will happen when you leave an egg in vinegar for three days.

Answers

Answer:

Explanation:

Determine the treatments you’ll be using on your eggs, and prepare the substances you’ll need. You can make salt-water solutions by dissolving different amounts of table salt in containers of water (e.g. 100g, 200g, 300g of salt (NaCl) per liter). You can make solutions of food coloring by adding a few drops of each color into containers of  

The Eggsperiment with Vinegar solution. The first experiment conducted was the egg placed in vinegar solution which allowed the egg to become soft and bouncy . Vinegar is a weak acid which is 5% acetic acid in water (meaning vinegar is largely just water). The egg has a shell that is made up of calcium carbonate   an air cell forms at the large end of the egg. While the embryo is growing, the shell membranes surround and contain the white or albumen of the egg. The albumen provides the liquid medium in which the embryo develops, and it also contains a large amount of the protein necessary for proper development. I hope this was hopeful

Hey! Please help. Will mark brainlist if u are right, ty

Answers

Answer:

40 hopefully right

Explanation:

What is a reaction that alkanes undergo ?

A. precipitation reactions
B. combustion reaction
C. acid base reactions
D. all of the above

Answers

Answer: B) Combustion Reaction

I need help with the second and third part of this problem.

Answers

Nalgas is a good answer with nalgas
Other Questions
A rope is stretched tight between the topsof two flag poles. One pole is 16 m tall, theother is 8 m tall and they stand on levelground 6 m apart. Find the rope's length.m The area of the globe located east of the prime meridian is called the _____________ .A) Southern HemisphereB) Eastern HemisphereC) Northern Hemisphere FROM THE BOOK, BRIAN'S WINTER - Describe a time when you have been too anxious to sleep. Compare your feelings to Brians. What are Spore-bearing structures in fungi called what? What Indigenous social movement organized land occupation and won titles for 350,000 people in Brazil A rectangular garden is 20ft longer than it is wide. Its area is 6300ft^2. What are its dimensions Differences between private company and cooperative Which of the following is part of the cryosphere?A. The oceanB. WetlandsC. PermafrostD. Aquifers i need help on this math problem How many country are in the world Hello, I could use the answer as soon as possible. Thank you ~Which letter indicates the area that represents the size of the Mongol Empire at its greatest extent?A.B.C.D. You manage the worksheet shown below and it contains information for the company's 1500 employees,You are asked to provide a list of all of the employees who are full time and make more than $45,000 peryear. What is the best way to create the list? To go to school in the morning. I first walk to the garden shed at 6 km/h to collect my bicycle. I then cycle to school at 15 km/h. The total journey normally takes 18.5 minutes, One day, I am lote and I run to the shed at 18 km/h and cycle at 27 km/h. The journey takes me 10 min 10 s. How far is it from my house to the garden shed? que se hace con la ofrenda despues del dia de muertos sir? sir? are u there? help me -_- PLEASE HELp !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Look at the PDF and help plz all do all questions AND SHOW THE WORK PLZ OR IT WILL FAIL. use the standard algorithm to show it If an organism's DNA contains 30% adenine nucleotides, what percentage of its DNA is composed of thymine nucleotides Regardless of the season, the temperature of the air always increases as you move away from Earth's surface and into the lower atmosphere . true or false? A patient has an illness that typically lasts about 24 hours. The temperature, T, in degrees Fahrenheit, of the patient t hours after the illness begins, is given by: T(t) = -0.013t^2 + 0.3172t +98.6. When does the patient reach its maximum value? what is the patient's maximum temp?