The density of a pure liquid at 25 degrees Celsius was calculated by determining the mass and volume of a sample of the liquid. A student measured the mass of a clean, dry 25.00 mL volumetric flask, filled the flask to its calibration mark with the liquid, and then measured the mass of the flask and liquid. The recorded measurements are shown in the table above. On the basis of this information, to how many significant figures should the density of the liquid be reported?

Answer:

amu = 34.055 or 34.1

Explanation:

to calculate the average mass, first convert the percentages into decimals. Then, calculate the mass numbers. To get this number, multiply the decimal by the mass number for each isotope and, then add them together.

( 0.315 x 32 ) + (0.685 x 35 ) = 34.055

The historical order of atomic models from the earliest to the most recent is as: Hard sphere model, electron shell model, and wave mechanical model. Therefore, option (A) is correct.

The atomic model can be described as the model used to describe the structure and composition of the atom. The atom as a primary component of matter has been under extensive study to understand the universe.

In the classical model of an atom, the atom is made of smaller particles with an electrical charge called electrons, protons, and neutrons. To understand the atomic models, it is important to understand how these particles make up the atom.

There are five principal atomic models that have been proposed over time,  which are Dalton’s atomic model, Thomson’s atomic model, Rutherford’s atomic model, Bohr’s atomic model, and the quantum atomic model.

Learn more about the atomic model, here:

https://brainly.com/question/1596638

#SPJ5

Your question was incomple, most probably the complete question was,

Which group of atomic models is listed in historical order from the earliest to the most recent?

A)  Hard sphere model, electron shell model, and wave mechanical model

B)  Hard sphere model,  wave mechanical model, and electron shell model

C) Electron shell model, Hard sphere model, and wave mechanical model

D) Electron shell model, wave mechanical model, and  Hard sphere model

Answer:

According to google, "About five million million hydrogen atoms could fit. Some factors would affect that number like the area of the head and the size of atoms (as well as attractions between atoms). Some atoms are larger than others." Is this accurate? I'm not sure. Good luck! :)

Answer:

The tilt of the Earth's axis also defines the length of daylight.Daylight hours are shortest in each hemisphere winter. Between summer and winter

solistice the number of daylight hours decreases and the rate of decrease is larger the higher the latitude.The fewer sunlight hours the colder nights.

Answer:

9429.9

Explanation:

periodt

Answer:

Explanation:

1=i

4=d

5=m

6=c

8=o

9=j

10=a

13=b

14=h

15=l

Theses are the ones i knew

Answer:

4.52 x 10²⁴ atoms Cl

Explanation:

A mole is a name that means a certain number like a dozen means 12. 1 mole of chlorine atoms is 6.022 x 10²³ chlorine atoms. The unit conversion is 6.022 x 10²³/mol.

[tex]7.50molCl*\frac{6.022 x 10^{23} atomsCl}{1molCl} = 4.5165*10^{24} atomsCl[/tex]

Round to 4.52 x 10²⁴ atoms Cl for the correct number significant figures.

Answer:

Molecular substances are made when two or more atoms join together by covalent bonds.

Explanation:

I hope this helps. I took the same class.

Answer:

Phosphorus trioxide

Explanation:

Answer:

Tetraphosphorus hexoxide

Explanation:

Give brainliest please

Answer:

mechanical or kinetic eg hammer and nails

Answer:

=0.00123

Explanation:

Look at the attachments below

Hope this helps (:

Answer:

0.00123

Explanation:

Standard notation is the normal way of writing numbers. Examples include 1, 2, and 10. The number 1.23 x 10^-3 is written in scientific notation. The decimal goes after the first nonzero integer and it is multiplied by a power of 10. The power or exponent attached to the 10 tells you how many places over you need to move the decimal to get back into scientific notation. Examples include 1.00 x 10^2 (representing 100 in standard form because you would move the decimal two places to the right.), 2.0 x 10^1 (representing 20 in standard form because you would move the decimal one place to the right), and 3.0 x 10^-4 (representing 0.0003 in standard form because you would move the decimal four places to the left since it is a negative exponent).

The negative (-3) exponent in 1.23 x 10^-3 indicated to move the decimal three places to the left. If it was positive, you would move it three places to the right.

In 1.23 x 10^-3 move the decimal to the left 1 place to get:

0.123

two places to get:

0.0123

and a third place to get:

0.00123

The final answer is 0.00123

Answer:

1875 nm

Explanation:

Given the Rydberg formula for hydrogen: 1/λ = R(1/n₁² - 1/n₂²)

where R ≈ 1.097* 10^7 /m

Hence;

1/λ = 1.097* 107/m * (1/3² - 1/4²) = 5.3 * 10^5/m

λ = 1.875 * 10-6 m = 1875 nm

iondine

Explanation:

bromine has 185pm, astatine haa 200, iondine has 140 and lastly fluorine has 147. so iondine has the smallest atomic radius

Answer:

small molecules move into the cell, Then it is by diffusion or facilliated diffusion.

Answer:

Friction between the hand and the wood decreased.

Explanation:

The texture of the wood went from rough → smooth! This means friction between the hand and the wood was notably decreased.

According to this prompt, the carpenter used sandpaper against the wood. Sandpaper just so happens to be a very abrasive substance. The sandpaper polished and leveled out the wood which wore all the jutting bits away.- overall, making it much smoother and more pleasant to touch!

Hope I was of assistance! Have a nice day and Spread the Love! <3

Answer:

Mass = 0.000176 gram

Steps:

m =  V × ρ

=  20 milliliter × 8.8 gram/cubic meter

=  2.0E-5 cubic meter × 8.8 gram/cubic meter

=  0.000176 gram

Explanation:

Answer:

11

Explanation:

Answer:

why do you not ask to your maam the answer

Answer:

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

From the question

volume = 2.45 mL

density = 4.255g/mL

We have

mass = 2.45 × 4.255 = 10.42475

We have the final answer as

Hope this helps you

NO can't  be used to fill a balloon

Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure). At STP, Vm is 22.4 liters/mol.

Answer options that need to be added :

a. Ne

b. NO

c. NH₃

d. CH₄

e. HF

will float in air ⇒ element or compound to fill the balloon, its density must be less than < 1.285 g/L

We can use the ideal gas formula ta find density :

[tex]\tt \rho=\dfrac{P.MW}{RT}[/tex]

Because at STP, then the constant value is

[tex]\tt \rho=\dfrac{1~atm\times MW}{0.08205\times 273.15~K}\\\\\rho=0.0446\times MW[/tex]

So that the density is determined from the MW(molecular weight) of each element or compound

Ar = 20.1797 g/mol

[tex]\tt \rho=0.0446\times 20.1797=0.9~g/L[/tex]

MW=30.006 g/mol

[tex]\tt \rho=0.0446\times 30.006=\boxed{\bold{1.338~g/L}}[/tex]

MW=17.0306 g/mol

[tex]\tt \rho=0.0446\times 17.0306=0.760~g/L[/tex]

MW=16.04 g/mol

[tex]\tt \rho=0.0446\times 16.04=0.715~g/L[/tex]

MW=20.01 g/mol

[tex]\tt \rho=0.0446\times 20.01=0.892~g/L[/tex]

Answer:

Earth is in the solar system.

Explanation:

Earth is our home and it is in the solar system.

Earth is the fifth-largest of the planets in the solar system and the third planet from the sun. Earth is the only planet having oxygen and water that supports life. Till now according to the research Earth is the only planet having life.

Planets are in the solar system, the solar system is in the milky way and the milky way is present in the universe. The astronomer identifies our home in the universe as "Earth is in the solar system" as Earth is our home.

Hence, the correct answer is "Earth is in the solar system."

Answer:

The Milky Way is in the universe. The solar system is in the Milky Way. Earth is in the solar system.

Explanation:

If the Milky Way Is in the universe and solar system you would know earth is also In the solar system, so "Our home planet is the third planet from the Sun, and the only place we know of so far that's inhabited by living things. While Earth is only the fifth largest planet in the solar system, it is the only world in our solar system with liquid water on the surface."

Answer:

A

Explanation:

A mixture is formed when two or more substances are physically mixed together. A compound is formed when two or more substances are chemically combined through a chemical reaction.

During freezing, water molecules lose energy and do not vibrate or move around as vigorously. This allows more stable hydrogen-bonds to form between water molecules, as there is less energy to break the bonds. ... Thus water expands as it freezes, and ice floats atop water.

When water molecule freezes, the water molecules have slowed down enough that their attractions fixed them into fixed positions.

The term freezing is defined as a phase transition where a liquid converted into a solid when its temperature is lowered below its freezing point.

The freezing point is the temperature at which a liquid turns solid. In the freezer, for example, water-filled ice cube trays.

Water molecules freeze in a hexagonal pattern, with molecules further apart than when the water was liquid. It is worth noting that the molecules in ice would be vibrating.

Thus, When water freezes, the water molecules slow down to the point where their attractions arrange them into fixed positions.

To learn more about the freezing, follow the link;

https://brainly.com/question/26230908

#SPJ2

Answer:

21

Explanation:9+10

Answer:

0.013g/cm^3

Explanation:

density= mass÷volume

Answer:

0.01(3) g/cm3 (cm3 means centimeter cubed, (3) means the 3 goes on forever)

Explanation:

The volume of the sheet is 300 cm3, and dividing 4 grams by 300 cm3 gets you 0.01(3) g/cm3. Hope it helps!

Answer:

Follows are the solution to this question:

Explanation:

The characterization with water molecules would be that light waves are made up of 2 different types of atoms (2 hydrogen and 1 oxygen atoms), as per the Dalton theory. There are many multiple times as many atoms of hydrogen as oxygen atoms in each water molecules. For every two hydrogen atoms, all water molecules have one oxygen atom.

Answer:

Sample Response: Dalton’s theory about compounds tells us that all water molecules have different kinds of atoms, two hydrogen atoms for every one oxygen atom.

Explanation: