Answer:
B. fibromyalgia
Explanation:
suppose that you have a solution of h2so4 with a concentration of 10.0 m. how much of this solution should you use to make 500.0 ml of 3.5 m solution?
So we need to measure out 175 ml of the 10.0 m H2SO4 solution and dilute it with enough water to make a total volume of 500.0 ml.
To make a 500.0 ml solution of 3.5 m H2SO4, we need to calculate the amount of H2SO4 needed and then dilute it to the desired concentration.
First, we can use the formula for molarity:
Molarity = moles of solute / liters of solution
To find the moles of H2SO4 needed, we can rearrange this formula to:
moles of solute = Molarity x liters of solution
We want to end up with a 3.5 m solution of H2SO4, so:
moles of H2SO4 = 3.5 mol/L x 0.5 L = 1.75 moles
Next, we need to figure out how much of the 10.0 m H2SO4 solution we need to use to get 1.75 moles of H2SO4.
We can use the formula:
moles of solute = concentration x volume (in liters)
Rearranging for volume:
volume = moles of solute / concentration
Plugging in our values:
volume = 1.75 moles / 10.0 mol/L = 0.175 L = 175 ml
Learn more about H2SO4 here:
https://brainly.com/question/12004196
#SPJ11
by titration, it is found that 20.44 ml of 0.1323 m naoh (aq) is needed to neutralize 25.00 ml of h2so4 (aq). calculate the concentration of the h2so4 solution in m.
The concentration of the H₂SO₄ solution is approximately 0.0541 M.
To calculate the concentration of the H₂SO₄ solution, you can use the concept of equivalence in the neutralization reaction:
H₂SO₄ (aq) + 2 NaOH (aq) → Na₂SO₄ (aq) + 2 H₂O (l)
Using the given information, we can start by finding the moles of NaOH:
moles of NaOH = volume (L) × concentration (M) = 0.02044 L × 0.1323 M = 0.00270492 moles
Since the stoichiometry of the reaction is 1:2 (H₂SO₄:NaOH), the moles of H₂SO₄ can be calculated as follows:
moles of H₂SO₄ = 0.00270492 moles NaOH × (1 mole H₂SO₄ / 2 moles NaOH) = 0.00135246 moles
Finally, we can find the concentration of the H₂SO₄ solution:
concentration of H₂SO₄ (M) = moles of H₂SO₄ / volume (L) = 0.00135246 moles / 0.02500 L = 0.0540984 M
Therefore, the concentration of the H₂SO₄ solution is approximately 0.0541 M.
Visit here to learn more about stoichiometry : https://brainly.com/question/30215297
#SPJ11
tollens's test shows the presence of aldehydes . a positive tollens's test appears as a silver precipitate . a negative tollens's test appears as
Tollens's test shows the presence of aldehydes . a positive Tollens's test appears as a silver precipitate . a negative Tollens's test appears as presence of ketone.
Tollens's test is a chemical test used to differentiate between aldehydes and ketones. In this test, a solution called Tollens's reagent, which contains silver nitrate and ammonia, is used to detect the presence of aldehydes. When an aldehyde is present, it undergoes oxidation by reacting with the Tollens's reagent, forming a silver precipitate.
A positive Tollens's test is indicated by the formation of this silver precipitate, which appears as a shiny silver layer on the inside of the test tube. This silver layer is also referred to as a "silver mirror." This reaction occurs because the aldehyde group is oxidized to a carboxylic acid, while the silver ions in the Tollens's reagent are reduced to metallic silver.
On the other hand, a negative Tollens's test means that no aldehyde is present, and thus, no silver precipitate forms. This is typically observed when a ketone is present in the test sample, as ketones do not readily undergo oxidation like aldehydes do. In this case, the test tube remains clear or slightly cloudy, depending on the reaction conditions and the substances being tested.
know more about Tollens's test here
https://brainly.com/question/30892406#
#SPJ11
Complete question is :-
tollens's test shows the presence of aldehydes . a positive tollens's test appears as a silver precipitate . a negative tollens's test appears as ______.
Help what's the answer?
The partial pressure of carbon dioxide in the flask is 7.10 atm and the total pressure in the flask is 11.25 atm.
What is ideal gas law?The ideal gas law is a fundamental law of physics that describes the behavior of ideal gases under various conditions. It is expressed mathematically as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the ideal gas constant, and T is the absolute temperature of the gas in Kelvin.
To find the partial pressure of carbon dioxide and total pressure in the flask, we need to use the ideal gas law:
PV = nRT
First, we need to calculate the number of moles of each gas:
nO₂ = mO₂ / MM(O₂) = 3.64 g / 32.00 g/mol = 0.1135 mol
nCO₂ = mCO₂/ MM(CO₂) = 8.53 g / 44.01 g/mol = 0.1937 mol
where m is the mass of the gas, and MM is the molar mass of the gas.
Next, we can calculate the total number of moles of gas in the flask:
ntotal = nO₂ + nCO₂ = 0.1135 mol + 0.1937 mol = 0.3072 mol
The total pressure in the flask can be calculated using the ideal gas law:
Ptotal = ntotalRT / V
where R = 0.08206 L·atm/K·mol is the gas constant.
The temperature needs to be converted to Kelvin:
T = 38°C + 273.15 = 311.15 K
Substituting the values, we get:
Ptotal = (0.3072 mol)(0.08206 L·atm/K·mol)(311.15 K) / 8.39 L
= 11.25 atm
Therefore, the total pressure in the flask is 11.25 atm.
To find the partial pressure of carbon dioxide, we need to use the mole fraction of carbon dioxide:
XCO₂ = nCO₂ / ntotal
Substituting the values, we get:
XCO₂ = 0.1937 mol / 0.3072 mol = 0.6309
The partial pressure of carbon dioxide can be calculated using Dalton's law of partial pressures:
PCO₂ = XCO₂ Ptotal
Substituting the values, we get:
PCO₂ = 0.6309 × 11.25 atm
= 7.10 atm
Therefore, the partial pressure of carbon dioxide in the flask is 7.10 atm.
Learn more about pressure here:
https://brainly.com/question/12971272
#SPJ1
at a certain temperature the solubility of lead(ii) iodide is 0.064 g/100 ml. what is the solubility product of lead(ii) iodide at this temperature? provide your answer rounded to 2 significant figures.
The solubility product (Ksp) of a substance is a measure of the maximum solubility of that substance in a given solution. It is calculated as the product of the molar concentrations of the ions present in the solution.
In the case of lead(II) iodide, the Ksp can be calculated as the product of the molar concentrations of Pb2+ and I− ions present in the solution.
At the given temperature, the solubility of lead(II) iodide is 0.064 /100 ml. Therefore, the molar concentrations of Pb2+ and I− ions in the solution would be 0.064/100 ml divided by the molar mass of lead(II) iodide (364/mol). This gives a Ksp of 4.07 x 10-9, which can be rounded to 4.1 x 10-9. This is the solubility product of lead(II) iodide at the given temperature.
In summary, the solubility product of lead(II) iodide at a certain temperature is 4.1 x 10-9 when rounded to two significant figures.
Know more about Molar concentrations here
https://brainly.com/question/15532279#
#SPJ11
find a qualitative test to detect iron in water. what is observed? what is the reaction? document where the information was obtained g
There are several qualitative tests that can be used to detect the presence of iron in water. One commonly used method is the Phenanthroline test.
In this test, a small amount of Phenanthroline reagent is added to the water sample. If iron is present, a deep red color is observed. The reaction that takes place is the formation of a complex between iron ions and Phenanthroline.
The information was obtained from the "Standard Methods for the Examination of Water and Wastewater," which is a widely used reference book in the field of water quality analysis.
To detect iron in water, you can also use a qualitative test called the "Prussian Blue" or "potassium ferrocyanide" test.
Collect a water sample that you want to test for iron. Add a few drops of potassium ferrocyanide solution to the water sample. The chemical formula of potassium ferrocyanide is K4[Fe(CN)6]. Observe any color changes in the water sample. If iron is present in the water, you will observe a blue precipitate, known as Prussian Blue or ferric ferrocyanide, forming in the solution. The reaction can be represented as:
Fe3+ (aq) + K4[Fe(CN)6] (aq) → Fe4[Fe(CN)6]3 (s)
Fe3+ is the ferric ion (iron) from the water sample, and Fe4[Fe(CN)6]3 is the Prussian Blue precipitate.
This information can be found in various sources such as textbooks on qualitative analysis or online resources like chemistry websites and educational platforms. For example, you can refer to "Qualitative Chemical Analysis" by Daniel C. Harris or check resources like the American Chemical Society's website.
More on iron qualitative test: https://brainly.com/question/1620149
#SPJ11
calculate the mass of solid agcl that is produced when 525ml of .35 m alcl3 is used with excess ag2so4 solution
The mass of solid AgCl produced when 525 mL of 0.35 M AlCl3 is used with excess Ag2SO4 solution is 78.97 g.
The balanced chemical equation for the reaction between AlCl3 and Ag2SO4 is:
2 AlCl3 + 3 Ag2SO4 → Al2(SO4)3 + 6 AgCl
From the equation, we can see that 2 moles of AlCl3 react with 3 moles of Ag2SO4 to produce 6 moles of AgCl. Therefore, the mole ratio of AlCl3 to AgCl is 2:6 or 1:3.
To calculate the moles of AgCl produced, we need to first calculate the moles of AlCl3 used.
Moles of AlCl3 = concentration x volume / 1000
Moles of AlCl3 = 0.35 mol/L x 0.525 L
Moles of AlCl3 = 0.18375 mol
Since the mole ratio of AlCl3 to AgCl is 1:3, the moles of AgCl produced is:
Moles of AgCl = 3 x Moles of AlCl3
Moles of AgCl = 3 x 0.18375 mol
Moles of AgCl = 0.55125 mol
The molar mass of AgCl is 143.32 g/mol. Therefore, the mass of AgCl produced is:
Mass of AgCl = moles of AgCl x molar mass of AgCl
Mass of AgCl = 0.55125 mol x 143.32 g/mol
Mass of AgCl = 78.97 g
Therefore, the mass of solid AgCl produced when 525 mL of 0.35 M AlCl3 is used with excess Ag2SO4 solution is 78.97 g.
Learn more about the mass
https://brainly.com/question/19694949
#SPJ4
of the four basic elements necessary for life as we know it, three are made
Of the four basic elements necessary for life as we know it, three are made In supernovae explosions. Option c is correct.
The four basic elements necessary for life as we know it are carbon, nitrogen, oxygen, and hydrogen. While these elements can be found throughout the universe, the origin of these elements can be traced back to the nuclear reactions that occur inside stars.
Carbon, nitrogen, and oxygen are synthesized in the cores of stars through the process of stellar nucleosynthesis. However, heavier elements like carbon, nitrogen, and oxygen cannot be synthesized in stars, but instead are formed during supernovae explosions.
These explosions release a huge amount of energy, and during the explosion, the temperatures and pressures are high enough to fuse lighter elements together into heavier elements, including the elements necessary for life. Therefore, it can be concluded that three of the four basic elements necessary for life as we know it are made in supernovae explosions. Hence Option c is correct.
To learn more about basic elements, here
https://brainly.com/question/28948712
#SPJ4
The complete question is:
Of the four basic elements necessary for life as we know it, three are made
a. In terrestrial laboratoriesb. In the Big Bangc. In supernovae explosionsd. in the interiors of stars.e. By large, diffuse clouds of gas and dustonly one acetyl coa molecule is used directly in fatty acid synthesis. which carbon atoms in this fatty acid were donated by this acetyl coa? only write the carbon number (for example: c1)
The one acetyl CoA molecule is used directly in the fatty acid synthesis. The carbon atoms in the fatty acid that were donated by the acetyl CoA is the Carbon 17 and the carbon 18.
The Carbon 17 and the carbon 18 that were donated by the acetyl CoA. The extra mitochondrial synthesis of the fatty acid in the two carbon fragments. The Acetyl-CoA carboxylase are the enzyme in the regulation of the fatty acid synthesis this is because it will provides the necessary building blocks as for the elongation of the fatty acid in the carbon chain.
The Fatty acids are the building blocks and the fat in the bodies and present in the food that we eat.
To learn more about fatty acid here
https://brainly.com/question/31376345
#SPJ4
the hydration of ion: what interactions are at work in an aqueous salt solution to promote hydration?
The most important interaction is between the ions and the water molecules. There are also electrostatic interactions between the ions and the water molecules in aqueous salt solution.
In an aqueous salt solution, there are several interactions at work to promote hydration of ions. The most important interaction is between the ions and the water molecules. When the salt is dissolved in water, the water molecules surround the ions, forming hydration shells. These shells help to stabilize the ions and prevent them from coming into contact with each other.
The strength of the hydration interaction between an ion and a water molecule depends on the charge and size of the ion. Small ions with high charges, such as Na+ and Mg2+, have a strong interaction with water molecules because they can form more intimate contacts with water molecules. On the other hand, large ions with low charges, such as Cl- and SO42-, have weaker hydration interactions because they cannot form as many intimate contacts with water molecules.
In addition to the hydration interaction, there are also electrostatic interactions between the ions and the water molecules. These interactions occur because the ions have charges, which can interact with the partial charges on the water molecules. The strength of the electrostatic interaction depends on the charge of the ion and the distance between the ion and the water molecule.
Overall, the hydration of ions in an aqueous salt solution is a complex process that involves both hydration and electrostatic interactions. These interactions are crucial for stabilizing the ions in solution and preventing them from coming into contact with each other.
Learn more about aqueous salt solution here:
https://brainly.com/question/9947161
#SPJ11
The hydration of ions in an aqueous salt solution is promoted through ion-dipole interactions, hydrogen bonding, and electrostatic forces. These interactions help to stabilize the hydrated ions in the solution.
What interactions promote hydration of a solution?The hydration of ions in an aqueous salt solution involves several interactions to promote hydration. These interactions include:
1. Ion-dipole interactions: These are the attractive forces between the charged ions (cations and anions) of the dissolved salt and the polar water molecules. The positive end (hydrogen atoms) of water molecules surround the negative ions, while the negative end (oxygen atom) of water molecules surround the positive ions.
2. Hydrogen bonding: This is a specific type of dipole-dipole interaction that occurs between the hydrogen atom of a polar molecule (such as water) and an electronegative atom (like oxygen). In an aqueous salt solution, hydrogen bonding can occur between water molecules surrounding the ions.
3. Electrostatic forces: These forces occur between charged particles and help to stabilize the hydration shell around the dissolved ions.
To know more about Intermolecular Forces:
https://brainly.com/question/30897286
#SPJ11
how would a tendency toward stereotyping and countertransference affect the nurse's ability to complete a client's cultural assessment?
1. Facilitate the care planning process
2. Promote decisions based on the nurses value system
3. Utilize an open honest approach while responding to the client's concerns
4. Develop an unbiased approach to care.
It is essential for nurses to be aware of their own biases and prejudices to provide culturally competent care.
If a nurse has a tendency toward stereotyping and countertransference, it can negatively impact their ability to complete a client's cultural assessment in several ways, including:
1. Facilitate the care planning process: Stereotyping and countertransference can prevent the nurse from understanding the client's cultural background, beliefs, and practices. Without this information, the nurse may not be able to develop a comprehensive care plan that meets the client's unique needs.
2. Promote decisions based on the nurse's value system: Stereotyping and countertransference can lead the nurse to make assumptions about the client's values and beliefs based on their own cultural background. This can result in decisions that are not in line with the client's preferences or needs.
3. Utilize an open honest approach while responding to the client's concerns: Stereotyping and countertransference can prevent the nurse from fully listening to and understanding the client's concerns. This can lead to a breakdown in communication and a lack of trust between the nurse and client.
4. Develop an unbiased approach to care: Stereotyping and countertransference can prevent the nurse from developing an unbiased approach to care. This can result in the provision of care that is not culturally sensitive, respectful, or appropriate for the client.
Therefore, it is essential for nurses to be aware of their own biases and prejudices to provide culturally competent care. Nurses must work to identify and address any stereotypes or countertransference that may impact their ability to provide patient-centered care. By doing so, the nurse can develop a more effective approach to care that is respectful, unbiased, and meets the unique needs of each client.
Visit to know more about Competent care:-
brainly.com/question/30624486
#SPJ11
for the previous light of 671 nm, if a light emitted 0.50 moles of this photon, what is the energy of this light?
The energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.92 * 10^4 Joules.
Let's understand this in detail:
To find the energy of light emitted by 0.50 moles of photons with a wavelength of 671 nm, we can follow these steps:
1. Convert the wavelength to meters: 671 nm * (1 meter / 1,000,000,000 nm) = 6.71 * 10^-7 meters.
2. Calculate the energy of one photon using the Planck's equation: E = hf, where E is energy, h is Planck's constant (6.626 * 10^-34 Js), and f is frequency.
3. To find the frequency, we use the speed of light (c) equation: c = λf, where λ is the wavelength. Rearrange the equation to find the frequency: f = c / λ.
4. Substitute the values and calculate the frequency: f = (3 * 10^8 m/s) / (6.71 * 10^-7 m) = 4.47 * 10^14 Hz.
5. Now, calculate the energy of one photon: E = (6.626 * 10^-34 Js) * (4.47 * 10^14 Hz) = 2.96 * 10^-19 J.
6. Finally, find the energy of 0.50 moles of photons: Energy = (0.50 moles) * (6.022 * 10^23 photons/mole) * (2.96 * 10^-19 J/photon) = 8.92 * 10^4 J.
So, the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.92 * 10^4 Joules.
Learn more about photons: Which of the following could be the energy of a photon in the visible range? https://brainly.com/question/15946945
#SPJ11
The energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.93 x [tex]10^4[/tex] J.
To find the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm, we can use the following steps:
1. Convert the wavelength to meters: 671 nm = 671 x [tex]10^{(-9)}[/tex] m
2. Calculate the energy of a single photon using Planck's equation: E = h * c / λ, where E is the energy, h is the Planck's constant (6.626 x [tex]10^{(-34)}[/tex] Js), c is the speed of light (3.0 x [tex]10^8[/tex] m/s), and λ is the wavelength in meters.
3. Calculate the total energy of 0.50 moles of photons by multiplying the energy of a single photon by Avogadro's number (6.022 x [tex]10^{(23)}[/tex] particles/mole) and the number of moles (0.50).
Step-by-step calculation:
1. λ = 671 nm = 671 x [tex]10^{(-9)}[/tex] m
2. E (single photon) = (6.626 x [tex]10^{(-34)}[/tex] Js) * (3.0 x [tex]10^8[/tex] m/s) / (671 x [tex]10^{(-9)}[/tex] m) = 2.967 x [tex]10^{(-19)}[/tex] J
3. Total energy = E (single photon) * 0.50 moles * (6.022 x [tex]10^{(23)}[/tex] particles/mole) = (2.967 x [tex]10^{(-19)}[/tex] J) * 0.50 * (6.022 x [tex]10^{(23)}[/tex]) = 8.93 x [tex]10^4[/tex] J
So, the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.93 x 10^4[tex]10^4[/tex] J.
To learn more about moles, refer:-
https://brainly.com/question/26416088
#SPJ11
how will the types of bonds being broken.formed leading to the two different tpyes of products affect the overall energy of the reactions g
The types of bonds being broken and formed will impact the overall energy of the reaction, and this can be determined by examining whether the reaction is endothermic or exothermic.
The type of bonds being broken and formed in a reaction will have a significant impact on the overall energy of the reaction. When strong bonds are broken, more energy is required as compared to breaking weaker bonds.
Similarly, when strong bonds are formed, more energy is released as compared to forming weaker bonds. If the reaction involves breaking strong bonds and forming weak bonds, it will be an endothermic reaction, meaning that it requires energy to occur.
Conversely, if the reaction involves breaking weak bonds and forming strong bonds, it will be an exothermic reaction, meaning that it releases energy.
To learn more about : energy
https://brainly.com/question/30083274
#SPJ11
The rate of a certain reaction with unit of M/s increase by a factor of 4 when [A] doubled and increase by a factor of 27 when [B] triples. What is the unit of rate constant for this reaction?
The unit of rate constant for this reaction is 1 / (s M⁴).
The rate of the reaction can be expressed as:
rate = k[A]²[B]³
where k is the rate constant and x and y are the orders of reaction with respect to A and B, respectively.
We can use the given information to determine the values of x and y.
When [A] is doubled, the rate increases by a factor of 4. This means:
(rate when [A] is doubled) / (rate when [A] is not doubled) = 4
[(k[2A]^x[B]^y) / (k[A]^x[B]^y)] = 4
2^x = 4
x = 2
Similarly, when [B] is tripled, the rate increases by a factor of 27. This means:
(rate when [B] is tripled) / (rate when [B] is not tripled) = 27
[(k[A]^2[3B]^y) / (k[A]^2[B]^y)] = 27
3^y = 27
y = 3
Substituting the values of x and y in the rate equation,
rate = k[A]²[B]³
The unit of rate constant can be determined as follows:
unit of rate = M/s
unit of [A] = M
unit of [B] = M
unit of rate constant = unit of rate / (unit of [A]² unit of [B]³)
Substituting the units.
unit of rate constant = (M/s) / (M² M³) = 1 / (s M⁴)
To know more about reaction, here
brainly.com/question/17101840
#SPJ4
what can you conclude from this about the signs of and , assuming that the enthalpy and entropy changes are not greatly affected by the temperature change?
The signs of ΔH and ΔS are related to the sign of ΔG, and an understanding of the sign of ΔG can provide information about the nature of the reaction and the effect of temperature on the thermodynamic parameters.
However, in general, the sign of ΔG (Gibbs free energy change) can provide information about the signs of ΔH and ΔS. The relationship between these three thermodynamic parameters is given by the following equation:
ΔG = ΔH - TΔS
where T is the temperature in Kelvin.
If ΔG is negative, then the reaction is spontaneous and the forward reaction is favored. This implies that the products have a lower free energy than the reactants. In this case, if the temperature is increased, the value of TΔS will become more positive, which means that the value of ΔH must become more negative in order for ΔG to remain negative.
This suggests that the reaction is exothermic (ΔH is negative) and that the entropy change is negative (ΔS is negative).
If ΔG is positive, then the reverse reaction is favored and the products have a higher free energy than the reactants. In this case, if the temperature is increased, the value of TΔS will become more negative, which means that the value of ΔH must become more positive in order for ΔG to remain positive. This suggests that the reaction is endothermic (ΔH is positive) and that the entropy change is positive (ΔS is positive).
learn more about thermodynamic parameters here:
https://brainly.com/question/31237925
#SPJ11
the decomposition of is first order in and has a rate constant of at a certain temperature: if the initial concentration of is , what is the concentration of after ?
a) The length of the second order for this reaction in minutes is 142.
b) The concentration of SO2(g) after 4.3 min with an initial concentration of SO2Cl2 of 2.089 M is 0.834 M.
a) To calculate the length of the second order, we use the equation t1/2 = ln2/k, where k is the rate constant. Substituting
k = 1.56e-04 s-1,
we get
t1/2 = ln2/1.56e-04 s-1
= 4425 s.
Converting to minutes, we get
tz = 4425 s/60 s/min
= 142 min.
b) To calculate the concentration of SO2(g) after 4.3 min, we use the integrated rate law for a first-order reaction, which is
ln([A]t/[A]0) = -kt.
We can rearrange this equation to solve for
[A]t: [A]t = [A]0e^(-kt).
Substituting the given values, we get
[SO2]t = 2.089 M * e^(-1.56e-04 s-1 * 4.3 min * 60 s/min) = 0.834 M.
To learn more about initial concentration, here
https://brainly.com/question/30609774
#SPJ4
The complete question is:
The decomposition of SO2Cl2 is first order in SO2Cl2 and has a rate constant of 1.56e - 04 s-1 at a certain temperature: SO2Cl2(g) → SO2(g) + Cl2(g)
a) What is the length of the second tą for this reaction in minutes? tz (min) = number (rtol=0.03, atol=1e-08)
b) If the initial concentration of SO2Cl2 is 2.089 M, what is the concentration of SO2(g) after 4.3 min.?
what does a new chromatogram look like after increasing polarity of mobile phase to remove a contaminant peak
The resulting chromatogram would show a shift in the retention times of the analytes. The peak corresponding to the contaminant may also appear smaller or absent altogether in the new chromatogram. The overall shape and resolution of the chromatogram may be slightly altered due to changes in the mobile phase composition.
The chromatography is the technique of separation of the components from a mixture. The chromatograph is referred to a visible record of the result of the chromatography.The mobile phase is referred to the gas or the liquid which flows with a different rate on the stationary phase. The mobile phase carries the components of the mixture. It is important for the separation of the components present in the mixture.When increasing the polarity of the mobile phase to remove a contaminant peak, the resulting chromatogram would show a shift in the retention times of the analytes. The contaminant peak would ideally be eluted earlier in the chromatogram, allowing for better separation from the target analytes. The peak corresponding to the contaminant may also appear smaller or absent altogether in the new chromatogram. The overall shape and resolution of the chromatogram may be slightly altered due to changes in the mobile phase composition.
Learn more about mobile phase here:
https://brainly.com/question/30616326
#SPJ11
Convert 10kg⋅cm/s^2 to newtons
10 kg.cm/s² is equivalent to 0.1 N when converted into newton.
The unit of force in the International System of Units (SI) is the newton (N). One Newton is defined as the amount of force required to accelerate a mass of one kilogram at a rate of one meter per second squared (1 N = 1 kg⋅m/s² ).
10 kg⋅cm/s² can be converted to newtons using the following formula:
1 N = 1 kg⋅m/s²
First, we need to convert cm to meters, as the unit of force is in newtons, which is based on meters.
1 cm = 0.01 m
Therefore, 10 kg⋅cm/s² can be converted to:
10 kg × 0.01 m/s² = 0.1 kg⋅m/s²
Now, using the formula:
1 N = 1 kg⋅m/s²
We can convert 0.1 kg⋅m/s² to newtons:
0.1 kg⋅m/s² = 0.1 N
To learn more about newton follow the link:
https://brainly.com/question/12505464
#SPJ4
when 107 people in the united states died in 1937 from taking elixir sulfanilamide containing diethylene glycol that causes kidney poisoning, why was the federal government unable to intervene on the grounds that the mixture was toxic?
The federal government was unable to intervene in elixir sulfanilamide containing diethylene glycol that causes kidney poisoning as there was no legal requirement that medicine be safe.
In 1937, a sulfonamide antibiotic called elixir sulfanilamide, which was incorrectly made, poisoned large numbers of people in the United States. Over a hundred individuals are said to have died as a result. The 1938 Federal Food, Drug, and Cosmetic Act was passed in response to the uproar produced by this episode and subsequent tragedies of a similar nature, greatly expanding the authority of the Food and Drug Administration to regulate pharmaceuticals.
A warning that Elixir Sulfanilamide was poisonous and lethal was promptly published in newspapers and broadcast on radio once the AMA laboratory identified diethylene glycol as the dangerous component. On the 14th, a doctor in New York was informed of the fatalities and immediately contacted Food and Drug Administration headquarters.
Learn more about Elixir sulfanilamide:
https://brainly.com/question/30902703
#SPJ4
q23.39 - level 3 homeworkunanswereddue apr 12th, 11:30 am 3-methylbutanoic acid, produced by bacteria from leucine, is a component of wine flavor and is responsible for foot odor. which alkylating agent(s) should be used for the malonic ester synthesis of 3-methylbutanoic acid?
2-Bromopropane should be used for the malonic ester synthesis of 3-methylbutanoic acid.
A sequence of events known as the malonic ester synthesis transform an alkyl halide into a carboxylic acid with two extra carbons. The generation of -alkylated carboxylic acids, which cannot be produced via direct alkylation, is one significant usage of this synthetic process.
A malonic ester, a diester derivative of malonic acid, serves as the catalyst for this reaction. The malonic ester most frequently employed in pathways is diethyl propanedioate, also called diethyl malonate. Diethyl malonate, which is a 1,3-dicarbonyl molecule, can be converted to its enolate using sodium ethoxide as a base since its -hydrogens are relatively acidic (pKa = 12.6). Given the potential for a transesterification reaction, other alkoxide bases are normally not utilised.
To learn more about malonic ester, refer:
brainly.com/question/31369630
#SPJ4
a solution is 17 ml ethanol in 48 ml of solution. what is the percent volume of ethanol in this solution?
The percent by volume of ethanol in a solution with 17 ml ethanol in 48 ml of solution is 35.4%.
Weight/volume percentage, volume/volume percentage, or weight/weight percentage are all possible percent answers. In each instance, the volume or weight of the solute divided by the total volume or weight of the solution yields the concentration in percentage.
It is also relevant to the numerator in weight units and the denominator in volume units and is known as weight/volume percent. This is true not only for a solution where concentration must be represented in volume percent (v/v%) when the solute is a liquid.
Volume of ethanol = 17 mL.
Volume of the solution = 48mL
Percent by volume of ethanol = [tex]\frac{Volume \ of \ ethanol }{Volume \ of \ Water + Volume \ of \ ethanol}[/tex]
= 17 / 48 x 100
= 0.354
= 35.4 %.
Therefore, the percent volume of ethanol in this solution is 35.4%.
Learn more about Percent by volume:
https://brainly.com/question/19379932
#SPJ4
an a Use the You need to make ar solid barium sulfide should you add?
To make solid barium sulfide, you would need to react barium metal with elemental sulfur. The balanced chemical equation for this reaction is:
Ba(s) + S(s) → BaS(s)
To carry out this reaction, you would need to add excess sulfur to the barium metal. This ensures that all the barium is consumed in the reaction, and no excess barium remains. The excess sulfur can be removed by washing the product with a suitable solvent.
It is important to note that the reaction between barium and sulfur can be exothermic, releasing heat and potentially causing a fire or explosion. Therefore, appropriate safety precautions, such as wearing gloves and eye protection and working in a well-ventilated area, should be taken when carrying out this reaction.
Learn more about barium sulfide,
https://brainly.com/question/18402799
#SPJ4
To make a solid barium sulfide (BaS) you would need to add sulfur (S) to barium (Ba) in a stoichiometric ratio of 1:1. This means that for every one mole of barium, you would need one mole of sulfur.
The reaction can be represented by the following chemical equation:
Ba + S → BaS
To carry out this reaction, you could start with a sample of metallic barium and add elemental sulfur powder to it, in a ratio of 1:1 by mole. The reaction between the two elements will produce solid barium sulfide.
It is important to note that this reaction can be highly exothermic, so appropriate safety precautions should be taken. Additionally, barium sulfide is a toxic and reactive compound, and should be handled with care.
For more question on barium sulfide click on
https://brainly.com/question/31013085
#SPJ11
________________ stimulates retention of na ions by the kidneys and sweat glands.
Aldosterone stimulates the retention of Na+ ions by the kidneys and sweat glands.
Step-by-step explanation:
1. Aldosterone is a hormone produced by the adrenal glands.
2. It is released in response to low blood volume, low blood pressure, or low sodium levels.
3. Once released, aldosterone acts on the kidneys and sweat glands.
4. It promotes the retention of Na+ ions, which helps to maintain the body's fluid balance.
5. By retaining Na+ ions, water is also retained, leading to increased blood volume and blood pressure.
To learn more bout ions, refer:-
https://brainly.com/question/14982375
#SPJ11
The hormone that stimulates retention of Na (sodium) ions by the kidneys and sweat glands is aldosterone. Your question is: "Which hormone stimulates retention of Na ions by the kidneys and sweat glands?"
Aldosterone is a hormone produced by the adrenal glands and is part of the renin-angiotensin-aldosterone system (RAAS). Its primary function is to regulate sodium and potassium balance in the body.
Here's a step-by-step explanation of how aldosterone works:
1. When blood pressure or blood volume decreases, the kidneys release an enzyme called renin.
2. Renin converts angiotensinogen, a protein produced by the liver, into angiotensin I.
3. Angiotensin I is then converted to angiotensin II by an enzyme called angiotensin-converting enzyme (ACE).
4. Angiotensin II stimulates the adrenal glands to produce aldosterone.
5. Aldosterone increases sodium reabsorption in the kidneys and sweat glands, causing the body to retain more sodium.
6. As a result, water retention also increases, leading to an increase in blood volume and blood pressure.
In summary, aldosterone is the hormone responsible for stimulating retention of Na ions by the kidneys and sweat glands.
To know more about angiotensin-converting enzyme (ACE):
https://brainly.com/question/9381741
#SPJ11
2.which is the most appropriate solvent to dissolve the mixture of compound x, y, and z from the previous question, assuming you want to utilize a solvent delay with the gc ms: clean acetone, diethyl ether, or toluene? justify the reason for your choice.
Compound X will have the shortest retention time and clean acetone is the most appropriate solvent to dissolve the mixture of Compounds X, Y, and Z for GC-MS analysis.
The compound with the shortest retention time will be Compound X, which has the lowest boiling point of 50 °C. In gas chromatography, retention time refers to the amount of time it takes for a compound to pass through the column and reach the detector. Compounds with higher boiling points tend to have longer retention times because they spend more time in the stationary phase, which slows their movement through the column.
The most appropriate solvent to dissolve the mixture of Compounds X, Y, and Z would be clean acetone. When choosing a solvent for GC-MS analysis, it is important to consider its volatility, purity, and compatibility with both the sample and the instrument. Acetone is a highly volatile solvent that evaporates quickly and completely, which is ideal for GC-MS analysis. It is also a polar solvent that can dissolve a wide range of organic compounds, making it a good choice for dissolving a mixture of compounds with different polarities.
To know more about solvent, here
brainly.com/question/30452436
#SPJ4
--The complete question is, 1.) If Compound X has a boiling point of 50 °C, Compound Y has a boiling point of 110 °C, and Compound Z has a boiling point of 89 °C, which of the compounds will have the shortest retention time? Justify and explain the reason for your choice. 2.) Which is the most appropriate solvent to dissolve the mixture of Compounds X, Y and Z from the previous question, assuming you want to utilize a solvent delay with the GC- MS: clean acetone, diethyl ether, or toluene? Justify the reason for your choice.--
PLEASE HELP ASAP!!!
As a result, the gas will be about 205 kelvin, or -68.5 degrees Celsius, in temperature.
What temperature is a gas at a 2 atm pressure and 2 l ?If a gas's temperature is increased to 927°C, so its pneumatic cylinder will be. A gas has a temperature of 127°C at 2 atm and 2 litres of volume. O 6 atm.
1 mole = 22.4 litres, correct?One mole ($6.023 times 1023 typical particles) of the any gas at STP takes up 22.4L of space. A mole of any gas takes up 22.4 litres at standard pressure and temperature (273K and 1atm).
To know more about kelvin visit:
https://brainly.com/question/12183328
#SPJ1
Help what's the answer?
Answer:
91
Explanation:
ok
Escriba ecuaciones iónicas netas balanceadas para las reacciones qué ocurren en cada uno de los casos siguientes. Identifique el o los iones espectadores de cada reacción. (a) Cr2(SO4)3(ac) + (NH4)2CO3(ac)=
(b) AgNO3(ac) + K2SO4(ac) =
(c) Pb(NO3)2(ac)+KOH(ac)=
(a) Balanced net ionic equation: Cr³⁺(aq) + 3CO₃²⁻(aq) → Cr₂(CO₃)₃(s); spectator ions: 2NH₄⁺(aq) and 3SO₄²⁻(aq).
(b) Balanced net ionic equation: Ag+(aq) + SO₄²⁻(aq) → Ag₂SO₄(s); spectator ions: K⁺(aq) and NO₃⁻(aq).
(c) Balanced net ionic equation: Pb²⁺(aq) + 2OH⁻(aq) → Pb(OH)₂(s); spectator ions: 2K⁺(aq) and 2NO₃⁻(aq).
(a) To write the balanced net ionic equation for the reaction between Cr₂(SO₄)₃ and (NH₄)₂CO₃, we first need to write the complete ionic equation:
Cr₂(SO₄)₃(aq) + 3(NH₄)₂CO₃(aq) → 2Cr(NO₃)₃(aq) + 3(NH₄)2SO₄(aq) + 3CO₂(g)Then, we eliminate the spectator ions (NH₄⁺ and SO₄²⁻) to get the net ionic equation:
Cr³⁺(aq) + 3CO₃²⁻(aq) → Cr₂(CO₃)₃(s)(b) For the reaction between AgNO₃ and K₂SO₄, the complete ionic equation is:
AgNO₃(aq) + K₂SO₄(aq) → 2KNO₃(aq) + Ag₂SO₄(s)Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:
Ag⁺(aq) + SO₄²⁻(aq) → Ag₂SO₄(s)(c) Finally, for the reaction between Pb(NO₃)₂ and KOH, the complete ionic equation is:
Pb(NO₃)₂(aq) + 2KOH(aq) → Pb(OH)₂(s) + 2KNO₃(aq)Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:
Pb²⁺(aq) + 2OH⁻(aq) → Pb(OH)₂(s)To learn more about Balanced net ionic equations, here
https://brainly.com/question/15467502
#SPJ4
An allosteric enzyme can exist in two states, _____ and _____.
tense; responsive
tense; relaxed
turgid; relaxed
tight; responsive
tight; relaxed
An allosteric enzyme can exist in two states, "tense" and "relaxed".
An allosteric enzyme is a type of enzyme that has multiple binding sites, including an active site where a substrate molecule binds and a regulatory site where a regulatory molecule (also called an effector) can bind. When a regulatory molecule binds to the regulatory site, it can cause a conformational change in the enzyme, which can affect the enzyme's activity.
Allosteric enzymes can exist in two main conformations or states: tense (T) and relaxed
Visit to know more about Enzyme:-
brainly.com/question/14577353
#SPJ11
how much volume does a 3.2 M solution of NaCl occupy with 50 moles of NaCl in solution?
Answer:
data given
molarity 3.2m
moles 50mol
Required volume
Explanation:
from
molarity =mole/volume
3.2=50/v
v=15.62
:.volume is15.62dm^3
a certain volume of air currently holds 25 grams of water vapor. at the same temperature, the maximum amount the air can contain is 100 grams. what is the relative humidity?
To calculate the relative humidity, you can use the following formula: Relative Humidity = (Current amount of water vapor / Maximum water vapor capacity) x 100 Relative Humidity = (25 grams / 100 grams) x 100 = 25% So, the relative humidity is 25%.
The relative humidity can be calculated by dividing the actual amount of water vapor in the air (25 grams) by the maximum amount the air can hold at that temperature (100 grams) and then multiplying by 100 to get a percentage.
So,
Relative Humidity = (actual amount of water vapor / maximum amount air can hold) x 100
Relative Humidity = (25 / 100) x 100
Relative Humidity = 25%
Therefore, the relative humidity in the air is 25%.
Learn more about humidity here: brainly.com/question/22069910
#SPJ11