Submit Test
Question 10 of 12- POS
GR8 Sci U03 USA FY21 Question: 1-10
Hannah added a silvery white metal to a beaker of cold water and noticed that gas bubbles were given off and a different substance formed. When she repeated the activity with hot water she noticed the gas bubbles were
released much more rapidly. Which statement best explains why the reaction occurred faster in hot water?
M

Answer:

OB: weathering

Explanation:

the cycle of heating and cooling causes stresses called thermal fatigue, this causes the material to break down. In hand, weathering is a physical and chemical process that causes rocks and minerals on the Earth's surface to break down and decompose. Therefore, this matches the process you have described.

Answer:

weathering fun way to imagen it: just imagen u saw ur worst enemie and pretende it is the rock and the wind and ice and water are ur best friends THEN BAM wind and ice and water(ur best friends) make the rock(worst enemie) to dust :D

Answer:

See image attached

Explanation:

The reaction of toluene with alkaline potassium permanganate in the presence of heat leads to the oxidation of the -CH3 to give benzoic acid.

Reaction benzoic acid with HNO3/H2SO4 yields the nitronium ion (NO2+).

Recall that -COOH is a metal director and deactivated the ring towards electrophilic substitution hence the m-nitrobenzoic acid is formed.

Reaction with FeBr3/Br2 yields the product shown in the image attached.

The cellular respiration process, which generates ATP as the final result, employs oxygen and sugar as reactants. So, the correct option is A.

Cellular respiration is the process by which organisms combine oxygen with food molecules, channeling the chemical energy from those resources into life-sustaining activities while eliminating carbon dioxide and water as waste.

Both oxygen and glucose are reactants in the mobile respiratory system. ATP is the primary component of mobile respiration; waste products include carbon dioxide and water.

Oxygen might be present or absent while cells are respiring. Nonetheless, the activity is essentially known as "cellular respiration" because the cell seems to "respire" by consuming molecular oxygen (as an acceptor of electron) and exhaling carbon dioxide (as an end product).

Therefore, the correct option is A.

Learn more about Cellular respiration, here:

https://brainly.com/question/29760658

#SPJ7

Your question is incomplete, most probably the complete question is:

The process shown in the diagram produces oxygen and sugar. Which

process uses oxygen and sugar as reactants?

Chloroplast

Mitochondrion

Sugar

CO, +H,0

ATP

Heat

Respiration

A. Cellular respiration

B. Water cycle

c. Transpiration

D. Photosynthesis

Answer:

There are:

Explanation:

First calculate the percentage of Cu and S in the compound:

These percentages will remain the same no matter how much of the compound we analyze.

Now we calculate the grams of Cu and S in 3801 kg of the compound:

Explanation:

To form bonds with noble gases, a lot of energy is required to form those bonds. Halogens, on the other hand, are extremely reactive. ... The halogens tend to be very reactive, while the noble gases are in no way reactive and don't bond easily, if at all.

Answer:

0.007756M KHP; 0.0009695 moles NaOH reacts; 0.03488M NaOH.

Explanation:

Potassium hydrogen phthalate, KHP, is a salt used as standard to determine concentration of basic solutions as NaOH solutions.

To find molarity of the KHP solution we need to convert mass of KHP to moles and divide this in 125mL = 0.125L:

Moles KHP -Molar mass: 204.22g/mol-:

0.198g * (1mol / 204.22g) = 0.0009695 moles KHP

Molarity:

0.0009695 moles KHP / 0.125L = 0.007756M KHP

NaOH reacts with KHP as follows:

NaOH + KHP → Na⁺ + KP⁻ + H₂O

That means 1 mole of NaOH reacts per mole of KHP, that means moles of NaOH that reacts are = Moles of KHP added:

0.0009695 moles NaOH reacts

In 27.80mL = 0.02780L the NaOH was contained. Molarity is:

0.0009695 moles NaOH / 0.02780L =

0.03488M NaOH

Moles of NaOH added will be "0.034".

According to the question,

→ [tex]Molarity = \frac{Number \ of \ moles}{Volume}[/tex]

By substituting the values, we get

                  [tex]= \frac{0.198}{204}\times \frac{1000}{125}[/tex]

                  [tex]= 0.0077 \ M[/tex]

Let,

Now,

→            [tex]M_1 V_1 = M_2 V_2[/tex]

→ [tex]0.0077\times 125=M_2\times 27.8[/tex]

→                [tex]M_2 = 0.034 \ moles[/tex]

Thus the above answer is appropriate.

Learn more:

https://brainly.com/question/23931328

Answer:

the contrasting sides of human nature

Explanation:

I took the test

Answer:

Noble gases... (You already know...)

Explanation:

The right-most column of the periodic table contains atoms with full electron shells, also known as Noble Gases.

Hope this helped!

Answer:

Noble gases

Explanation:

The six elements listed in the last column of the table (Group 18) of the periodic table are collectively referred to as the noble gases. All of the noble gases have the maximum number of electrons possible in their outer shells (two electrons in helium’s outer shell, and eight electrons for all the others), making them stable.

Answer:

96.72 m/min

Explanation:

The following data were obtained from the question:

Time (t) = 56.7 s

Distance (d) = 100 yard

Rate (R) =?

Next, we shall convert 56.7 s to minutes. This can be obtained as follow:

60 s = 1 min

Therefore,

56.7 s = 56.7 s × 1 min /60 s

56.7 s = 0.945 min

Next, we shall convert 100 yard to metre (m). This can be obtained as follow:

1 yard = 0.914 m

Therefore,

100 yard = 100 yard × 0.914 m /1 yard

100 yard = 91.4 m

Finally, we shall determine the rate of the swimmer as follow:

Time (t) = 0.945 min

Distance (d) = 91.4 m

Rate (R) =?

R = d/t

R = 91.4/0.945

R = 96.72 m/min

Thus the rate of the swimmer is 96.72 m/min

Suppose of sodium chloride is dissolved in of a aqueous solution of silver nitrate. Calculate the final molarity of chloride anion in the solution. You can assume the volume of the solution doesn't change when the sodium chloride is dissolved in it. Be sure your answer has the correct number of significant

Answer:

6.24 % of FeSO₄

Explanation:

Solute mass: 5.01 g of FeSO₄

Solvent mass: 75.3 g of water

Solution mass = solute mass + solvent mass

5.01 g + 75.3 g = 80.31 g

We can apply a rule of three. Mass percentage means the mass of solute which is contained in 100 g of solution. Then,

In 80.31 g of solution we have 5.01 g of solute

In 100 g solution, we may have (5.01  . 100)/ 80.31 = 6.24 g of solute.

This is the mass percentage: 6.24%

Answer: true

Explanation: Collection and analysis of data indicates that constructive forces include crustal deformation, faulting, volcanic eruption and deposition of sediment, while destructive forces include weathering and erosion.

Explanation:

The pressure will decrease but the volume remains constant

Answer:

Cu3 (PO4)2 contains a total of 2 atoms of phosphorus in just one molecule. (2.10 mol)(6.02214 x 10^23 atoms / mol)(2 phosphorous) = 2.53 x 10^24 atoms of phosphorous per molecule of copper i

Explanation:

Answer:

whats the question

Explanation:

Answer:

Calculate the average atomic mass of argon to two decimal places, given the following relative masses and abundances of each of the isotopes: argon-36 (35.97 amu; 0.337%), argon-38 (37.96 amu; 0.063%), and argon-40 (39.96 amu; 99.600%). ... So the atomic mass of Ar is 0.99639. 96 + 0.0006337. 96 + 0.00337*35.97 = 39.957.

Explanation:

hope this help

Answer:

–156 °C

Explanation:

The following data were obtained from the question:

Initial temperature (T1) = –20 °C

Initial volume (V1) = 140 mL

Final volume (V2) = 65 mL

Final temperature (T2) =?

Pressure = constant.

Next, we shall convert –20 °C to Kelvin temperature. This can be obtained as follow:

T(K) = T(°C) + 273

Initial temperature (T1) = –20 °C

Initial temperature (T1) = –20 °C + 273 = 253 K.

Next, we shall determine the new temperature of the gas as follow:

Initial temperature (T1) = 253 K

Initial volume (V1) = 140 mL

Final volume (V2) = 65 mL

Final temperature (T2) =?

V1/T1 = V2/T2

140/253 = 65/T2

Cross multiply

140 × T2 = 253 × 65

140 × T2 = 16445

Divide both side by 140

T2 = 16445 /140

T2 = 117 K

Finally, we shall convert 117 K to celcius temperature. This can be obtained as follow:

T(°C) = T(K) – 273

T2 = 117 K

T2 = 117 K – 273

T2 = –156 °C

Thus, the new temperature of the gas is –156 °C

Answer:

an element.

Explanation:

it is the purest form

Answer:

b

Explanation:

Answer:

h2so4

Explanation:

im big brain.

Answer:

B. LZAQD

A. Younger than A but older than Q

Explanation:

To solve this problem, we simply apply the stratigraphic laws which are the law of superposition and principle of cross cutting.

According to the principle of cross-cutting "features that cuts through a rock are younger than the layers they cut through". In this problem, the fault cuts through layers LZ and A which suggests that these layers are older than the faulting event. Layer Q is unaffected by the faulting so, the fault is older than the layer.

Answer: Its esterification reaction.

when organic acid react with alcohol it forms ester and water. reaction is known as esterification reaction.

CH3COOH + C2H5OH → CH3COOC2H5 + H2O

ethanoic acid + ethanol → ethyl acetate + water

this reaction takes place in the presence of acid catalyst ( dil H2SO4).

in this reaction oxygen of ethanol with lone pair act as nucleophile and carbonyl carbon of acetic acid act as electrophile.. so its nucleophilic substitution reaction of -COOH group.

Explanation:

Answer:

solubility

Explanation:

Answer:

c

Explanation:

Answer:

The elements that have the same number of energy levels or the orbitals.

Explanation:

They have he same number -- energy levels

Answer:

yes but first he need to check himself

Explanation:

bcoz if he cannot produce a sperm than she might have cheated him and the baby might be of someone other.

Answer:

Their atoms obey the octet rule

Explanation:

Chemical compounds are formed when atoms combine with one another in order to comply with the octet rule. The octet configuration gives an atom stability in electronic structure.

Answer:

Cell

Explanation:

I just passed this unit a month ago.

Answer:

It is 6. Cell

Explanation:

Cells make up the smallest level of a living organism such as yourself and other living things. The cellular level of an organism is where the metabolic processes occur that keep the organism alive. That is why the cell is called the fundamental unit of life.

I really hope this helped. God bless you and have a great day! :-)

Answer: Atoms of carbon and hydrogen

Explanation:

Answer:

The original concentration of the HCl is: 0.01925 M

Explanation:

Equation:

HCl+NaOH-------> NaCl+H₂O

Volume of NaOH added = 0.05 M

No of moles of NaOH = 15.4 mL [tex]x\frac{1 L}{1000 mL} x\frac{0.05 mol NaOH}{L}[/tex]

= 0.00077 mol NaOH

Then,

Volume of HCl solution = 40 mL x 1/1000 mL

= 0.0400 L

Therefore,

Concentration of HCl = 0.00077 mol/0.0400 L

= 0.01925 M

Now, to find the pH:

pH = -log₁₀[H⁺]

     = -log₁₀(2x10⁻⁶)

     = 5.7

The internal energy of a system : 21.9 kJ

The laws of thermodynamics 1 state that energy can be changed but cannot be destroyed or created  

The equation is:  

ΔU=Q+W    

Energy owned by the system is expressed as internal energy (U)  

The sign rules for heat and work are set as follows:  

• The system receives heat, Q +  

• The system releases heat, Q -  

• The system does work, W -  

• the system accepts work, W +  

The system absorbs 14.73 kJ⇒Q=+14.kJ

The system compressed⇒work done on the gas⇒W=+

W=-PΔV

[tex]\tt W=-1.54(1-5.720)\\\\W=7.2688[/tex]

[tex]\tt internal~energy(\Delta U)=Q+W\\\\\Delta U=14.73+7.2688\\\\\Delta U=21.9[/tex]