Shanika is an engineer at an amusement park who is experimenting with changes to the setup for a magnetic roller coaster ride. In one ride, there are two identical roller coaster cars (orange and green) that start on opposite sides of a large magnet located at the center of a station. Shanika wants to get the largest increase in potential energy she can by moving one car one space to the left or the right.


Shanika can move the orange car to point A or point B, or she can move the green car to point C or point D. Which movement should she make? Why will that movement result in the largest increase in potential energy? Describe the magnetic force that will act on the roller coaster car she moves.

Answer:

1kW = 1000W

600W = 0.6kW

Cost of electric bill = 0.6kWh × 24 × 30 × $0.05

                               = $21.60

Hi there!

Recall the conservation of momentum for an inelastic collision:

[tex]\large\boxed{m_1v_1 + m_2v_2 = (m_1 + m_2)v_f}}[/tex]

Remember, velocity is a VECTOR and direction must be accounted for. Let the 1000 kg car have a positive velocity and the 1500 kg car have a negative velocity (opposite direction).

Plug in the given values:

[tex](1000)(20) + (1500)(-10) = (1000 + 1500)v_f}}[/tex]

Solve:

[tex]20000 -15000 = 2500v_f}}\\\\5000 = 2500v_f\\\\v_f =\boxed{ 2 m/s}[/tex]

Answer:

Below!

Explanation:

Referring to the picture, we can conclude that the picture J will have the most effect on ocean tides.

Whichever model is similar to model J in the picture will be your answer.

Hoped this helped.

Answer:

You need a graphing calculator that implemented vectors. I don't know any that have it. Sorry.

Answer:

Provided an object traveled 500 meters in 3 minutes , to calculate the average velocity you should take the following steps:

Change minutes into seconds (so that the final result would be in meters per second). 3 minutes = 3 * 60 = 180 seconds ,

Divide the distance by time: velocity = 500 / 180 = 2.77 m/s .

Explanation:

Answer:8 AWG

Explanation: 6 current carrying conductors with 2 - 3 phase branch circuits. Divide 27000 by (480v × 1.732 or square root of 3) and you get 32.46 amps. Now using the code book, divide 32.46 by the adjustment factor of 6 CCC's which is .8 and you get 40.61 amps. Now go to Table 310.16 in the 2020 NEC book and you'll see that in the 90° column that 40.61 amps is above #10 AWG so you size up to #8 AWG.

Answer:

384000

Explanation:

it would be 384000 in km

Hi there!

II. Linear momentum of the system is zero.

This is an example of a RECOIL collision. With the Law of Conservation of Momentum, momentum remains constant before and after the collision.

Thus, the total momentum would also be equivalent to zero after the collision.

An example of the use of expansion of materials when they are heated is in

Thermometers. Thermometer is an instrument which is used to measure the

temperature of a place.

It contains mercury which expands as temperature increases. This is used

to accurately determine the temperature of an object.

The disadvantage of expansion of materials when they are heated can be

seen in roads as there is expansion of the surface as a result of heat

exposure leads to roads being rough thereby incurring more costs for

repairs.

Read more about Heat expansion on https://brainly.com/question/1166774

Answer:

397 j

Explanation:

Because 5.0kg yuh

The kinetic energy of the block with a mass of 5.0 kg is pushed on a frictionless surface by applying a horizontal force of 80.0 N. The block starts from rest, and its final velocity is 12.6 m/s is 396.9 J.

A moving item or particle has a certain kind of power called kinetic energy. When an item exerts a net force to perform work, which involves the transfer of energy, the object accelerates and as a result, gains kinetic energy.

The amount of kinetic energy that a moving object or particle possesses is determined by both its mass and rate of motion. Any combination of vibration, axis rotation, translation (or movement along a path from one location to another), and translation are all possible motion types.

Given:

The mass of the block, m = 5 kg,

The horizontal force, F = 80 N,

The velocity of the block, v = 12.6 m / s,

Calculate the kinetic energy by the formula given below,

[tex]KE = 1/2mv^2[/tex]

KE = 1 / 2 × 5 × 12.6²

KE =  1 / 2 × 5 × 158.6

KE = 396.9 J

Therefore, the kinetic energy of the block with a mass of 5.0 kg is pushed on a frictionless surface by applying a horizontal force of 80.0 N. The block starts from rest, and its final velocity is 12.6 m/s is 396.9 J.

To know more about Kinetic energy:

https://brainly.com/question/999862

#SPJ2

The complete question is A block with a mass of 5.0 kg is pushed on a frictionless surface by applying a horizontal force of 80.0 N. The block starts from rest, and its final velocity is 12.6 m/s. ​Find its kinetic energy?

Answer:

1. Spray Drying

Explanation:

it is the most modern

Hi there!

We can use the same equation for Gravitational Force:

[tex]\large\boxed{F_g = G\frac{m_1m_2}{r^2}}[/tex]

Fg = force due to gravity (N)

G = gravitational constant

m1,m2 = masses of objects (kg)

r = distance between objects (m)

Plug in the values provided:

[tex]F_g = (6.67*10^{-11})\frac{(2500)(3000)}{8^2} = \large\boxed{7.814 * 10^{-6}N }[/tex]

[tex]\huge\bf\underline{\underline{\pink{A}\orange{N}\blue{S}\green{W}\red{E}\purple{R:-}}}[/tex]

Here we've been given,

We have to find the gravitational attraction force (Fg) = ?

The standard formula to solve is given by,

[tex]:\implies\tt{F_g = g \frac{m_1m_2}{ {r}^{2} } } [/tex]

[tex]:\implies\tt{F_g = 6.67 \times {10}^{ - 11} \times \frac{(2500 )(3000)}{ {8}^{2} } }[/tex]

[tex]:\implies\tt{F_g = 6.67 \times {10}^{ - 11} \times \frac{7500000}{64} }[/tex]

[tex]:\implies\tt{F_g = 7.814 \times {10}^{ - 6} }[/tex]

Answer:

Let L be the length of the wire.

N λ = M L      where N is the number of wavelengths λ. Also, M and are integers and L is the length of the wire

There must be nodes at the ends of the wire and anti-nodes at the points of zero displacement - λ/2, λ, 3λ/ 2, etc.

The simplest would be 2 λ = L   or L = λ / 2

In such a situation one would have

N-A-N    or node-antinode-node

There is a 180 degree phase change upon reflection of the wave creating the standing wave

The distance between nodes or anti-nodes must be λ/2 and there must  be nodes at the ends of the wire

Time taken by the skydiver to land on the ground is 4.57 seconds

The applied force, F = 700 N

The mass of the skydiver, m = 80 kg

The velocity, v = 40 m/s

To calculate the time taken by the skydiver to fall to the ground will be calculated using the formula

[tex]F=\frac{mv}{t}[/tex]

Substitute F = 700, m = 80, and v = 40 to solve for t

[tex]700=\frac{80(40)}{t}\\\\700t=3200\\\\t=\frac{3200}{700}\\\\t=4.57 s[/tex]

Time taken by the skydiver to land on the ground is 4.57 seconds

Learn more here: https://brainly.com/question/25898421

Answer:

Explanation:

Height(h) = 4m; depth of the half filled tank 4m/2 =2m

Acceleration due to Gravity (g)=9.8m/s^2

Density (d)=1000kg/m^3

Pressure = hdg

Pressure = 2m × 9.8m/s^2 × 1,000kg/m^3

Pressure = 19,600Pa

Answer:

5m/s

Explanation:

equation for momentum is mass times velocity

25 x 5 = 125

Answer:

0.784m

Explanation:

This is a projectile motion problem so we analyze the horizontal and vertical motions separately. Since the question is asking for the height of the desk, it shows we need to analyze the vertical motion.

The acceleration of the first block (4 kg) is -9.8 m/s².

The given parameters:

The net force on the system of the two blocks is calculated as follows;

[tex]m_2 g - T = m_1 a[/tex]

where;

[tex]m_2 g - m_1 g = m_1 a\\\\a = \frac{m_2 g - m_1g}{m_1} \\\\a = \frac{g(m_2 - m_1)}{m_1} \\\\a = \frac{9.8(2-4)}{2} \\\\a = -9.8 \ m/s^2[/tex]

Thus, the acceleration of the first block (4 kg) is -9.8 m/s².

Learn more about net force on two connected blocks here: https://brainly.com/question/13539944

        Control rods

____________________

Control rods are inserted into the core of a nuclear reactor and adjusted in order to control the rate of the nuclear chain reaction

o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o

Both masses will have the same acceleration. The cart accelerates to the right with a magnitude of 4.9 m/[tex]s^{2}[/tex]. The correct answer is 4.90 m/[tex]s^{2}[/tex]

Given that a massless string connects a 1.00 kg mass to a 3.00 kg cart which is resting on a frictionless horizontal surface.

Let M = 1kg and m = 3 kg

Since the horizontal surface is frictionless, the tension in the string will be the same. when the mass is hanged over a frictionless pulley, the tension will also be the same.

When the mass is released, the cart accelerates to the right can be calculated  from Newton' second law of motion. That is,

M( g + a) = m(g - a)

1(9.8 + a) = 3( 9.8 - a)

9.8 +a = 29.4 - 3a

collect the like terms

4a = 19.6

a = 19.6/4

a = 4.9 m/[tex]s^{2}[/tex]

Therefore, the cart accelerates to the right with a magnitude of 4.9 m/[tex]s^{2}[/tex]. The correct answer is 4.90 m/[tex]s^{2}[/tex]

Learn more about dynamics here: https://brainly.com/question/24994188

Answer:

1. 60 kg m/s

2. 2.4 kg

3. none they both have same momentum

2.1 kg of sodium bicarbonate is equal to the 2.1 x 10¹² ng of sample. Option D is correct.

Mass is the quantity of the substance in the body or object. The SI unit of mass is Kilogram.

There are other units of measure,

First convert kg to gram,

Since, 1 Kg = 1000 g

2.1 kg = grams of sample

So,

Do the cross multiplication,

[tex]\rm mass\ of\ sample = \dfrac {2.1\ kg \times 1000\ g }{ 1 kg}\\\\\rm mass\ of\ sample =2100 g[/tex]

Now, convert 2100 g to nano-grams

Since, 1 g = 1 x 10⁹ ng

2100 g = ng of sample

So,

Do the cross multiplication,

[tex]\rm mass\ of\ sample = \dfrac {2100 g \times 1 \times 10^9 ng }{1\ g}\\\\\rm mass\ of\ sample = 2.1 \times 10^1^2 ng[/tex]

Therefore, 2.1 kg of  sodium bicarbonate is equal to the 2.1 x 10¹² ng of sample.

To know more about Mass units,

https://brainly.com/question/489186

Answer:

a 5 kilogram mass, at a height of 3 meters, while acted on by Earth's gravity would have 147.15 Joules of potential energy, PE = 3kg * 9.81 m/s2 * 5m = 147.15 J.

Explanation:

Answer:

3000N

Explanation:

divided to get answer

the force needed to accelerate the 1000kg car by 3m/s2 is 3000N

By using third law of equation of motion, the final velocity V of the rubber puck is 8.5 m/s

Given that a hockey player hits a rubber puck from one side of the rink to the other. The parameters given are:

mass m =  0.170 kg

initial speed u = 6 m/s.

Distance covered s = 61 m

To calculate how fast the puck is moving when it hits the far wall means we are to calculate final speed V

To do this, let us first calculate the kinetic energy at which the ball move.

K.E = 1/2m[tex]U^{2}[/tex]

K.E = 1/2 x 0.17 x [tex]6^{2}[/tex]

K.E = 3.06 J

The work done on the ball is equal to the kinetic energy. That is,

W = K.E

But work done = Force x distance

F x S = K.E

F x 61 = 3.06

F = 3.06/61

F = 0.05 N

From here, we can calculate the acceleration of the ball from Newton second law

F = ma

0.05 = 0.17a

a = 0.05/0.17

a = 0.3 m/[tex]s^{2}[/tex]

To calculate the final velocity, let us use third equation of motion.

[tex]V^{2}[/tex] = [tex]U^{2}[/tex] + 2as

[tex]V^{2}[/tex]  = [tex]6^{2}[/tex] + 2 x 0.3 x 61

[tex]V^{2}[/tex] = 36 + 36

[tex]V^{2}[/tex] = 72

V = [tex]\sqrt{72}[/tex]

V = 8.485 m/s

Therefore, the puck is moving at the rate of 8.5 m/s (approximately) when it hits the far wall.

Learn more about dynamics here: https://brainly.com/question/402617

Answer:

because when an object approaches the speed of light, it's mass starts to increase exponentially, and would be infinite at the speed of light. It would therefore require MORE than an infinite amount of energy to accelerate even a single electron to the speed of light

Answer:

a = v^2 / R      centripetal acceleration

R = v^2 / a     a at the surface of earth is 9.8 m/s^2

R = (90 m/s)^2 / 9.8 m/s^2 = 827 m