Please Help
1. Convert 1.65 moles of magnesium chloride to grams
2. how many moles are in 100 grams of methane (CH4) ​

Answer:

321.27 grams.

Explanation:

To determine the weight of 4.56 x 10^24 formula units of lithium chloride, we first need to know the molar mass of lithium chloride.

Lithium chloride (LiCl) has a molar mass of approximately 42.39 g/mol. This means that one mole of lithium chloride weighs 42.39 grams.

To convert formula units to moles, we need to use Avogadro's number, which is approximately 6.022 x 10^23 particles per mole.

So, to find the number of moles in 4.56 x 10^24 formula units of lithium chloride, we can divide by Avogadro's number:

4.56 x 10^24 formula units / (6.022 x 10^23 formula units/mol) = 7.58 moles

Now that we know the number of moles, we can use the molar mass to find the weight:

7.58 moles x 42.39 g/mol = 321.27 grams

Therefore, 4.56 x 10^24 formula units of lithium chloride weigh approximately 321.27 grams.

The forward reaction for Reaction B is endothermic, as indicated by the negative change in enthalpy (-91 kJ/mol) for the forward reaction.

If Reaction B was at equilibrium and then was heated, the amount of CH₃OH would be less after the reaction adjusts to the new temperature. This is because the forward reaction is endothermic, meaning that an increase in temperature would shift the equilibrium towards the reactants side to counteract the increase in temperature.

If the pressure in the container of Reaction B was increased, the amount of CH₃OH would be more after the reaction adjusts to the new pressure. This is because the forward reaction produces fewer moles of gas than the reverse reaction, so increasing the pressure would shift the equilibrium towards the side with fewer moles of gas (the products side) to counteract the increase in pressure.

If H₂ was added to Reaction B at equilibrium, the amount of CH₃OH would be more after the reaction adjusts. This is because H₂ is a reactant in the reverse reaction, so adding more H₂ would shift the equilibrium towards the products side to counteract the increase in H₂.

If H₂ was added to Reaction B at equilibrium, the amount of CO would be less after the reaction adjusts. This is because CO is a product in the forward reaction, so adding more H₂ would shift the equilibrium towards the products side to counteract the increase in H₂, resulting in a decrease in CO.

To learn more about endothermic refer to:

brainly.com/question/23184814

#SPJ4

Answer:

A. The acidic concentration of a solution can be determined by titrating with a strong base. You calculate the number of moles of strong base required to reach the equivalence point of the titration. Then, using the mole ratio from the balanced neutralization equation, convert from moles of strong base to moles of acid. [source, Khan Academy]

B. The endpoint is reached in a titration when the indicator used changes color (i.e, pink).

Explanation:

For B, if you do it correctly, the equivalence point is eventually reached and this is signified by the change in color of the indicator in the analyte solution.

Answer:

To answer this question, one must first understand the stoichiometric equation for this particular reaction. The equation states that for each one mole of calcium hydroxide (Ca(OH)2) that reacts with one mole of hydrofloric acid (HF), one mole of calcium fluoride (CaF2) and one mole of water (HOH) is produced. Therefore, if 0.5 moles of hydrofloric acid are reacted with the calcium hydroxide, then 0.5 moles of calcium fluoride will be produced.

To calculate the mass of calcium fluoride that will be produced, one must first look up the atomic mass of both calcium and fluorine and multiply them by the number of moles of each that are present in the reaction. In this case, the atomic mass of calcium is 40.08 and the atomic mass of fluorine is 19. Therefore, the mass of calcium fluoride that will be produced is equal to (40.08 x 0.5) + (19 x 0.5) = 29.54 g.

In conclusion, if 0.5 moles of hydrofloric acid are reacted with calcium hydroxide, then a mass of 29.54 g of calcium fluoride will be produced.

The Latent Heat of Fusion of sodium is 2.60 kJ/mol. Fusion is an endothermic process, which means that it requires energy to occur.

What is Fusion?

Fusion, also known as melting, is the physical process in which a substance changes from a solid state to a liquid state as a result of absorbing heat. When a substance is heated to its melting point, the energy absorbed causes the molecules or atoms of the substance to vibrate more rapidly, eventually breaking the bonds between them and allowing them to move more freely. As a result, the substance transitions from a solid state, where the molecules are tightly packed and fixed in position, to a liquid state, where the molecules are more spread out and can move around each other more freely.

The Latent Heat of Fusion (Lf) is defined as the amount of heat required to melt one mole of a substance at its melting point.

Lf = ΔHfus / n

where ΔHfus is the enthalpy of fusion and n is the number of moles of the substance.

In this case, ΔHfus of sodium is given as 2.60 kJ/mol. To calculate the Latent Heat of Fusion, we need to know the number of moles of sodium. Let's assume we have one mole of sodium.

Then,

Lf = ΔHfus / n

= 2.60 kJ/mol / 1 mol

= 2.60 kJ/mol

Therefore, the Latent Heat of Fusion of sodium is 2.60 kJ/mol.

Learn more about Fusion from given link

https://brainly.com/question/17870368

#SPJ1

Answer: True

Explanation: Chadwick, a British physicist, worked to isolate the neutral particle that Rutherford had proposed.  This particle, known as the neutron, was hypothesized by Rutherford to exist within atomic nuclei. In 1932, Chadwick successfully conducted experiments that confirmed the existence of the neutron and provided evidence for its role in nuclear structure.

Rutherford's model of the atom suggested that the nucleus contains positively charged protons and that electrons orbit around it. However, this model could not explain why the positively charged protons did not repel each other and cause the nucleus to break apart. Rutherford proposed the existence of neutral particles, later identified as neutrons, to account for the stability of the atomic nucleus.

Chadwick's work involved bombarding various elements with alpha particles and observing the resulting radiation. Through careful experimentation, he was able to demonstrate that the radiation consisted of neutrons, which had the ability to penetrate and interact with atomic nuclei without being deflected by electromagnetic forces. This discovery revolutionized our understanding of atomic structure and paved the way for further advancements in nuclear physics.

Learn more about James Chadwick here: https://brainly.com/question/11833036.

Answer:

True

Explanation:

I answered so the person who answered first can get branliest!

The mass of methane (CH4) must be burned to give 1575 kJ of energy is 28.4 g.

The first step is to determine the number of moles of methane required to produce 1575 kJ of energy. We can do this using the conversion factor provided:

891 kJ of energy is produced by 1 mole of methane (CH4)

1575 kJ of energy is produced by how many moles of methane?

1575 kJ / 891 kJ/mol = 1.77 mol

Next, we can use the molar mass of methane to convert it from moles to grams:

Molar mass of methane = 12.01 g/mol (for carbon) + 4 x 1.01 g/mol (for hydrogen) = 16.05 g/mol

Mass of methane = number of moles x molar mass

Mass of methane = 1.77 mol x 16.05 g/mol = 28.4 g

Therefore, 28.4 g of methane must be burned to produce 1575 kJ of energy.

Learn more about the mass of methane at

https://brainly.com/question/17756207

#SPJ4

Answer:  Time = Distance ÷ Speed

The number of moles of hydrogen that can be made from 4.89 x 10-22 atoms of iron is 6.65 x 10-26 moles H2.

Hydrogen is the most abundant element found in the universe. It is a colorless, odorless gas that is the lightest of all elements. Hydrogen has the symbol H and the atomic number 1. It is the most basic building block of all matter. Hydrogen is an important part of many molecules, including water (H2O), proteins, and fats. It is a key component of many fuels, including gasoline, natural gas, and propane. Hydrogen is used in the production of ammonia, methanol, and other chemicals. It is also used in fuel cells.

To learn more about hydrogen

https://brainly.com/question/24433860

#SPJ1

Answer:

Condensation is the process that took place when the water droplets formed on the grass.

Explanation:

Condensation is the process that took place when the water droplets formed on the grass. This occurs when airborne water vapour meets a colder surface, like the grass blades in the morning, and transforms into liquid form, generating tiny water droplets on the surface.

Answer:

The balanced chemical equation for the combustion of methane (CH4) with oxygen (O2) is:

CH4 + 2O2 → CO2 + 2H2O

This equation tells us that for every mole of methane that reacts, we get 2 moles of water produced. So, for 3 moles of methane, we would get:

3 moles CH4 × (2 moles H2O / 1 mole CH4) = 6 moles H2O

Now we need to convert moles of water to mass. The molar mass of water (H2O) is 18.015 g/mol. So, the mass of water produced is:

6 moles H2O × 18.015 g/mol = 108.09 g

Therefore, if 3 moles of methane reacts with oxygen to produce carbon dioxide and water, 108.09 g of water is produced.

Explanation:

To calculate the growth rate of the wolf pack, we need to find the difference between the birth rate and death rate and divide that by the total wolf population. Therefore, the growth rate of the wolf pack is 0.27%.

The difference between births less deaths and the difference between immigrants and emigrants in a given country, territory, or geographic area at a given year is what is used to describe the annual increase in population size.

Growth rate = (birth rate - death rate) / total population

Birth rate = 15/51 = 0.294

Death rate = 8/51 = 0.157

Total population = 51

Growth rate = (0.294 - 0.157) / 51 = 0.137 / 51 = 0.0027 or 0.27%

To know more about birth rate visit:-

brainly.com/question/626780

#SPJ1

Answer:

fusion

Explanation: hope this helps

Answer:333.3333 mL or 333mL

Explanation:

M1V1 = M2 V2

M1= 3.00 M

V2= 2500 ml

M2= 0.400M

V1= solving for

V1= M2V2/M1

0.400 X 2500 / 3.00  =

Answer:

Explanation:

λν = c

Wavelength, λ (lambda), times frequency, ν (nu), equals the speed of light.

c = 3.0 x 108 m/s

===

We are given a wavelength of 483 nanometers.  1 nanometer = 1x10^-9 meter.   483nm = 4.83x10^-7 meters

---

λν = c

ν = c/λ

ν = (3.0x10^8 m/s)/(4.83x10^-7 m)

ν = 6.21x10^14 Hz  (1/s)

We are unable to give the mass of the conjugate a numerical value without knowing the precise conjugate that was employed.

We must apply the equation for estimating the pH of a buffer solution to estimate the mass of the solid conjugate:

pH equals pKa plus log([A-]/[HA])

Finding the [A-] and [HA] concentrations comes first. Since we are aware that the solution has a 40 mL volume, we can write:

[HA] = [A-] = conjugate moles / solution volume

The Henderson-Hasselbalch equation must then be used to determine how many moles of conjugate are present:

pH equals pKa plus log([A-]/[HA])

4.45 = log(1/1) + pKa

pKa = 4.45

We can now enter the predetermined values:

4.45 is equal to 4.45 plus log(moles of conjugate / 0.04 L).

Calculating the conjugate moles

moles of conjugate = 0.04 L x 1 M / log(moles of conjugate / 0.04 L) = 0 moles of conjugation

Using the molar mass of the conjugate, we can finally determine its mass:

mass is determined by multiplying the number of moles by the molar mass.

mass = molar mass x 0.04 moles.

We are unable to give the mass of the conjugate a numerical value without knowing the precise conjugate that was employed.

Learn more about  "mass" here:

https://brainly.com/question/28683060

#SPJ4

The factor that is most sensitive to changes in temperature is the fraction of molecules with energy greater than the activation energy.

The statement that best represents the effect of temperature on reaction rates is called the Arrhenius equation. It is expressed as [tex]k = Ae^{-Ea/RT},[/tex]

where k is the rate constant,

A is the pre-exponential factor or frequency factor,

Ea is the activation energy,

R is the gas constant, and T is the absolute temperature.

At high temperatures, the reaction rate increases, and at low temperatures, the reaction rate decreases.

The Arrhenius equation shows that the rate constant depends on two factors:

the activation energy and the fraction of molecules with energy greater than the activation energy.

Thus, the most sensitive factor to changes in temperature is the fraction of molecules with energy greater than the activation energy.

To learn more about Activation energy refer: https://brainly.com/question/28384644

#SPJ11

Answer:

8. 1.52 x 10^24 molecules

9. 29206 g

10. 3791.97 g

Explanation:

8. Molecular mass of C14H18N2O5 = 294.3 g/mol

745 g / 294.3 g/mol = 2.53 moles

1 mole has 6.022 x 10^23 molecules

=> 2.53 x 6.022 x 10^23 = 1.52 x 10^24 molecules

9. 1 mole of Fe₂(SO3)3 has 6.022 x 10^23 molecules

so 5 x 10^25/6.022 x 10^23 = 83.0 moles

1 mole of Fe₂(SO3)3 is equal 351.88g

so 83.0 x 351.88 = 29206 g

10. Molar mass of Ba3(PO4)2 is 601.9 g

so 6.3 x 601.9 = 3791.97 g

You must compare the total amount of oxygen atoms on the reactant and product sides of the chemical equations in order to determine whether the oxygen atoms are evenly distributed on both sides.

Because matter cannot be generated or destroyed, there must be an equal amount of atoms of each element on both sides of the equation. Coefficients are the only variables that can be altered while balancing equations. An equation cannot be balanced by changing the subscripts in a chemical formula.

Reactant side:

B2Br has no oxygen atoms

6 HNO3 has 18 oxygen atoms (6 x 3)

Product side:

2 B(NO3)3 has 18 oxygen atoms (2 x 3 x 3)

6 HBr has no oxygen atoms

18 oxygen atoms total are present on the reactant side.

18 oxygen atoms total are on the product side.

To know know more chemical equations visit:-

https://brainly.com/question/30087623

#SPJ1

To calculate the difference in volume between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution, we must first calculate the mass of ethanol present in the solution. We can do this by multiplying the molarity of ethanol (8.407 M) by the volume of ethanol present (529.0 mL) and the molar mass of ethanol (46.07 g/mol).

Mass of ethanol = 8.407 M x 529.0 mL x 46.07 g/mol = 24617.3 g

We can then calculate the volume of ethanol in the solution by dividing the mass of ethanol (24617.3 g) by the density of ethanol (0.7893 g/mL):

Volume of ethanol = 24617.3 g/0.7893 g/mL = 31202.1 mL

Therefore, the difference in volume between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution is:

Difference in volume = Volume of ethanol + Volume of water - Actual volume of solution

Difference in volume = 31202.1 mL + 594.0 mL - (529.0 mL + 594.0 mL) = 277.1 mL

The difference in volume between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution is 277.1 mL.

For more questions related to difference in volume, refer here:

https://brainly.com/question/30717869#

#SPJ11

Answer:

hydrogen,lithium, sodium

Answer:

78 grams of sodium sulfide should be formed

Explanation:

The balanced chemical equation for the reaction between sodium and sulfur is:

2 Na + S → Na2S

According to the equation, 2 moles of sodium react with 1 mole of sulfur to produce 1 mole of sodium sulfide. The molar mass of sodium is approximately 23 g/mol and the molar mass of sulfur is approximately 32 g/mol.

We need to determine which reactant is limiting and which is in excess in order to calculate the amount of sodium sulfide produced.

Using the given masses, we can calculate the number of moles of each reactant:

moles of sodium = 23 g / 23 g/mol = 1 mol

moles of sulfur = 32 g / 32 g/mol = 1 mol

From this calculation, we can see that both reactants are present in the stoichiometric ratio required by the balanced equation, so neither is limiting.

Therefore, the amount of sodium sulfide formed will be based on the amount of either reactant, which is 1 mole. Using the molar mass of sodium sulfide (78 g/mol), we can calculate the mass of sodium sulfide formed:

mass of Na2S = 1 mol x 78 g/mol = 78 g

Therefore, when 23 grams of sodium react with 32 grams of sulfur, a total of 78 grams of sodium sulfide should be formed.

At the final temperature, the ice has melted completely and the water has cooled down to the same temperature. Therefore, we can set the final temperature as T_f for both ice and water.

To determine the final temperature of the system, we need to use the principle of conservation of energy. The energy lost by the water when it cools down must be equal to the energy gained by the ice when it melts and warms up. We can express this as:

Q_water = Q_ice

where Q_water is the heat lost by the water and Q_ice is the heat gained by the ice.

The heat lost by the water can be calculated using the formula:

Q_water = m_water * C_water * ΔT

where m_water is the mass of water, C_water is the specific heat capacity of water, and ΔT is the change in temperature of water.

The heat gained by the ice can be calculated using the formula:

Q_ice = m_ice * L_f + m_ice * C_ice * ΔT

where m_ice is the mass of ice, L_f is the heat of fusion of ice, C_ice is the specific heat capacity of ice, and ΔT is the change in temperature of ice

Now we can set up the equation:

m_water * C_water * (T_i - T_f) = m_ice * L_f + m_ice * C_ice * (T_f - T_i)

To know more about temperature visit:-

brainly.com/question/29072206

#SPJ1

Answer:

To solve this problem, we need to use the balanced chemical equation for the reaction between oxygen gas (O₂) and potassium chloride (KCI) to form potassium chlorate (KCIO₃):

2KCI + 3O₂ → 2KCIO₃

We can use the given mass of O₂ (20.8 g) and the molar mass of O₂ (32.00 g/mol) to find the moles of O₂:

20.8 g O₂ x (1 mol O₂ / 32.00 g O₂) = 0.65 mol O₂

According to the balanced equation, 3 moles of O₂ react with 2 moles of KCI to produce 2 moles of KCIO₃. Therefore, we can use the moles of O₂ to find the moles of KCIO₃:

0.65 mol O₂ x (2 mol KCIO₃ / 3 mol O₂) = 0.43 mol KCIO₃

Finally, we can use the molar mass of KCIO₃ (122.55 g/mol) to convert moles of KCIO₃ to grams of KCIO₃:

0.43 mol KCIO₃ x (122.55 g KCIO₃ / 1 mol KCIO₃) = 52.71 g KCIO₃

Therefore, the grams of KCIO₃ that can be produced from 20.8 g O₂ is 52.71 g KCIO₃. However, the problem does not ask for the grams of KCIO₃, but instead asks for the grams of KCIO, which is not a valid compound. It is possible that there is a typo in the problem and that it should have asked for the grams of KCIO₃ instead.

Explanation:

If the pressure contributed by CH4 is 111.2 atm, the pressure due to NH3 would be 109.1 atm.

To solve the problem, we can use the ideal gas law equation:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.

We need to find the pressure due to NH3, so let's start by finding the number of moles of each gas:

Now, we can use the pressure contributed by CH4 to find the total pressure:

Ptotal = PCH4 + PNH3

111.2 atm = PCH4 + PNH3

Finally, we can solve for the pressure due to NH3:

Therefore, the pressure due to NH3 is 109.1 atm.

More on pressure can be found here: https://brainly.com/question/12977546

#SPJ1

We can determine the equilibrium concentration when we are given the initial concentration and reaction of an acid or base. In the given reaction,

HA is an acid that dissociates in water to form its conjugate base A− and a hydronium ion H3O+.

HA(aq) + H2O(l) ⇌ A−(aq) + H3O+(aq)

For any weak acid, the dissociation constant is defined as follows:

Ka = [A−][H3O+]/[HA]

We can determine the equilibrium concentration from the above formula by using the initial concentration.

Let’s consider a weak acid HA with an initial concentration of [HA]0.

It will form [A−] and [H3O+] at equilibrium.

If the degree of dissociation of the acid is x, then the concentration of [H3O+] at equilibrium will be [H3O+] = x, and the concentration of [A−] will be [A−] = x. And the concentration of [HA] at equilibrium will be [HA] = [HA]0 − x.

So, we can write the equilibrium expression for the dissociation of HA as:

Ka = [A−][H3O+]/[HA]Ka = x * x/([HA]0 − x)

By solving the above equation, we can obtain the value of x, which is the degree of dissociation of the acid.

At equilibrium, the equilibrium concentration of HA is [HA] = [HA]0 − x. The equilibrium concentration of A− is [A−] = x. The equilibrium concentration of H3O+ is [H3O+] = x. Thus, we can determine the equilibrium concentration from the initial concentration of a weak acid or base without using the equilibrium constant Kc.

#SPJ11

Learn more about equilibrium: What is true of a reaction that has reached equilibrium? https://brainly.com/question/2051941

The resulting solution is a homogeneous mixture of Na+, NO3^-, NH4+, and Cl^- ions surrounded by water molecules.

When solutions of sodium nitrate (NaNO3) and ammonium chloride (NH4Cl) are mixed, the resulting solution contains the ions Na+, NO3^-, NH4+, and Cl^-. All of these ions are soluble in water, so the solution remains clear and homogeneous. On a molecular scale, the Na+ ions are surrounded by water molecules, as are the NO3^- ions, NH4+ ions, and Cl^- ions. This is known as hydration, and it is the reason why these compounds are soluble in water. The ions are free to move around in the solution, which allows them to conduct electricity.

To learn more about Homogeneous mixture :

https://brainly.com/question/14441492

#SPJ11

The amount of heat transferred would be -8.85 kJ.

To calculate the heat transferred, we need to first determine the limiting reactant, which is the reactant that is completely consumed in the reaction. This will determine the amount of product that can be formed and hence the amount of heat released.

We start by calculating the moles of sulfur and oxygen:

Moles of sulfur = 0.54 g / 32.06 g/mol = 0.0168 mol

Moles of oxygen = 0.54 g / 31.998 g/mol = 0.0169 mol

The balanced equation shows that 2 moles of sulfur react with 3 moles of oxygen to produce 2 moles of sulfur trioxide. So, the ratio of moles of sulfur to oxygen in the reaction is 2:3. Since the ratio of moles of sulfur to oxygen in the reactants is less than 2:3, oxygen is the limiting reactant.

The amount of sulfur trioxide produced can be calculated using the mole ratio from the balanced equation:

Moles of sulfur trioxide produced = 0.0169 mol * (2 mol SO3 / 3 mol O2) = 0.0112 mol

The heat transferred in the reaction can be calculated using the heat of reaction per mole of sulfur trioxide:

Heat transferred = 0.0112 mol * (-790 kJ/mol) = -8.85 kJ

More on heat transfer can be found here: https://brainly.com/question/13433948

#SPJ1

Mole fraction of the water in the solution made using 145.7 g of water and 120.0 g of ethanol is 0.7564 mole.

Mass of water = 145.7 g

molar mass of water = 18.02 g/mole

Number of moles = mass ÷ molar mass

                             = 145.7 g ÷ 18.02 g/mole

                             = 8.085 mole

mass of ethanol = 120 g

molar mass of ethanol = 46.07 g/mole

Number of moles = mass ÷ molar mass

                              = 120 g ÷ 46.07 g/mole

                              = 2.6047 mole

Total number of moles = moles of water + moles of ethanol

                                      = 8.085 mole + 2.6047 mole

                                      = 10.6897 mole

The term mole fraction is also known as molar fraction. It is defined as unit of the amount of a constituent divided by the total amount of all constituents in a mixture.

Mole fraction of water = moles of water ÷ Total number of moles

                                     = 8.085 mole ÷  10.6897 mole

                                     = 0.756335

                                     = 0.7564 mole approximately.

To learn more about Mole fraction

https://brainly.com/question/14783710

#SPJ4