PLEASE HELP HURRY ILL MARK BRAINLEST

Answer:

B) iron (Fe) im sure its iron

Answer: smart guess i have is c

Explanation:

guessing sorry

Answer:francium

The first ionization energy varies in a predictable way across the periodic table. The ionization energy decreases from top to bottom in groups, and increases from left to right across a period. Thus, helium has the largest first ionization energy, while francium has one of the lowest.

Explanation:

The least measure of the energy needed to remove the loosely bound electron of an atom or a molecule is called ionization energy.

The correct order from lowest to highest first ionization energy is:

This can be explained as:

Therefore, Cesium will have the least ionization energy as compared to sodium, aluminium and argon.

To know more about ionization energy follow the link:

https://brainly.com/question/2571722

Answer:

B. Three

Explanation:

The three dots that are surrounding the nucleus are electrons.

Explanation:

According to the diagram, the atom has 3 electrons.

Electronic configuration =

1s² 2s¹

Therefore,

Option B is correct✔

Answer: The final volume of the balloon is 335.6 L

Explanation:

To calculate the final volume of the balloon, we use the equation given by combined gas law:

[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]

where,

[tex]P_1[/tex] = Initial pressure = 1.2 atm

[tex]P_2[/tex] = Final pressure = [tex]3.00\times 10^{-3}[/tex] atm

[tex]V_1[/tex] = Initial volume = 1.00 L

[tex]V_2[/tex] = Final volume = ?

[tex]T_1[/tex] = Initial temperature = [tex]25^oC=[25+273]=298K[/tex]

[tex]T_2[/tex] = Final temperature = [tex]-23^oC=[-23+273]=250K[/tex]

Putting values in above equation, we get:

[tex]\frac{1.2atm\times 1.00L}{298K}=\frac{3.00\times 10^{-3}atm\times V_2}{250K}\\\\V_2=\frac{1.2\times 1.00\times 250}{298\times 3.00\times 10^{-3}}\\\\V_2=335.6L[/tex]

Hence, the final volume of the balloon is 335.6 L

Answer:

a

Explanation:

Because that is the answer

Answer:

1 Hydrogen H

2 Helium He

3 Lithium Li

4 Beryllium Be

5 Boron B

6 Carbon C

7 Nitrogen N

8 Oxygen O

9 Fluorine F

10 Neon Ne

11 Sodium Na

12 Magnesium Mg

13 Aluminium Al

14 Silicon Si

15 Phosphorus P

16 Sulfur S

17 Chlorine Cl

18 Argon Ar

19 Potassium K

20. calcium Ca

Answer:

h - hydrogen (1)

he - helium (2)

li - lithium (3)

be - beryllium (4)

b - boron (5)

c - carbon (6)

n - nitrogen (7)

o - oxygen (8)

f - fluorine (9)

ne - neon (10)

na - sodium (11)

mg - magnesium (12)

al- aluminium (13)

si - silicon (14)

p - phosphorus (15)

s - sulfur (16)

cl - chlorine (17)

ar - argon (18)

k - potassium (19)

ca - calcium (20)

Answer:

WPC medium range forecasting

Explanation:

Answer:

62.5 km/hr

Explanation:

Speed can be found by dividing the distance by the time.

s=d/t

We know the car travelled a distance of 125 kilometers in 2 hours. Therefore:

• d=125 km

• t= 2 hr

Substitute the values into the formula.

s= 125 km/ 2 hr

Divide

s= 62.5 km/ hr

The speed of the car is 62.5 kilometers per hour.

It take 0.54 hours to deposit 6.36g of copper

Faraday's Law I

"The mass of the substance formed at each electrode is proportional to the electric current flowing in the electrolysis

W = e.i.t / 96500

[tex]\tt \large {\boxed {\bold {W \: = \: \dfrac {e \times i \: x \: t} {96500}}}}[/tex]

e = equivalent = Ar / valence

i = current, A

t = time, s

W=6.36 g

e = 63.5 : 2 =31.75

i = 10 A

[tex]\tt t=\dfrac{W\times 96500}{e.i}\\\\t=\dfrac{6.36\times 96500}{31.75\times 10 }\\\\t=1933.04~s\approx 0.54~hours[/tex]

Answer:

Chemists keep track of how electrons are transferred between atoms in a reaction using an oxidation number. If the oxidation number of an element in the reaction increases or becomes less negative, the element has been oxidized, while a decreased or more negative oxidation number means the element has been reduced.

Answer:

It has more electrons in the product than in the reactant

Explanation:

A p e x

Answer:

a1

The main difference between SPECT and PET scans is the type of radiotracers used. While SPECT scans measure gamma rays, the decay of the radiotracers used with PET scans produce small particles called positrons. A positron is a particle with roughly the same mass as an electron but oppositely charged.

Explanation:

a2

While imaging tests such as X-rays can show what the structures inside your body look like, a SPECT scan produces images that show how your organs work. For instance, a SPECT scan can show how blood flows to your heart or what areas of your brain are more active or less active.

a3

PET and SPECT have been extensively evaluated as diagnostic procedures for dementia. Substantial progress has been made in developing radioligands that bind to amyloid deposits in the brain, which should provide new opportunities for early diagnosis and treatment monitoring in Alzheimer's disease

a4

What are the disadvantages of spect as compared to pet?

However, SPECT has issues, including long scan times and low-resolution images prone to artifacts and attenuation. Some artifacts can easily be misidentified as perfusion defects. SPECT also does not provide a quantifiable estimate of the blood flow, whereas PET does, experts say.

Answer:

A

Explanation:

bc inorganic compoud refers to all compound that do not contain carbons.

Answer:

you can run out of money the supplier could run out or they could stop making the renewable.

Explanation:

Answer:

hello

Explanation:

Answer:

[tex]\boxed {\boxed {\sf FeBr_3}}[/tex]

Explanation:

We can assume that this is a neutral compound, meaning the charges of the ions are balanced.

We are given: Iron (III) Bromide.

We want to find the chemical formula.

First, find the symbols of the elements.

Next, find the charges on the ions.

The Roman Numeral 3 in parentheses (III). This indicates the iron cation has a charge of +3.

We need to balance out the charge of +3 with the bromine. Bromine can have a charge of +5, +1, and -1. Since we already have a cation (positive ion), bromine must be an anion (negative ion). We also know the charge must be negative to balance out the compound.

But, the charge is only -1. That would still leave the compound unbalanced. Therefore, we must have 3 bromine atoms to balance out the iron. The 3 will become a subscript.

So, put all the information together and write the formula:

FeBr₃

A chemical formula lists the constituent elements of a compound together with the number of atoms in each element's smallest unit, such as a molecule or formula unit. Here the formula for Iron (III) Bromate is FeBr₃.

A compound's chemical composition is symbolically represented by its chemical formula. Chemical formulas reveal the elements that make up a compound's molecules as well as the ratio in which their atoms combine to create those molecules.

The sorts of atoms and their numbers in an element or compound are described by a chemical formula. Each element's atoms are denoted by one or two distinct letters. a collection of chemical symbols indicating the constituent elements and their corresponding ratios.

To know more about chemical formula, visit;

https://brainly.com/question/33415196

#SPJ6

Answer:

Oceanic crust, extending 5-10 kilometers (3-6 kilometers) beneath the ocean floor, is mostly composed of different types of basalts. Geologists often refer to the rocks of the oceanic crust as “sima.” Sima stands for silicate and magnesium, the most abundant minerals in oceanic crust. (Basalts are a sima rocks.) Oceanic crust is dense, almost 3 grams per cubic centimeter (1.7 ounces per cubic inch).

Oceanic crust is constantly formed at mid-ocean ridges, where tectonic plates are tearing apart from each other. As magma that wells up from these rifts in Earth’s surface cools, it becomes young oceanic crust. The age and density of oceanic crust increases with distance from mid-ocean ridges.

Just as oceanic crust is formed at mid-ocean ridges, it is destroyed in subduction zones. Subduction is the important geologic process in which a tectonic plate made of dense lithospheric material melts or falls below a plate made of less-dense lithosphere at a convergent plate boundary.

At convergent plate boundaries between continental and oceanic lithosphere, the dense oceanic lithosphere (including the crust) always subducts beneath the continental. In the northwestern United States, for example, the oceanic Juan de Fuca plate subducts beneath the continental North American plate. At convergent boundaries between two plates carrying oceanic lithosphere, the denser (usually the larger and deeper ocean basin) subducts. In the Japan Trench, the dense Pacific plate subducts beneath the less-dense Okhotsk plate.

Explanation:

Answer:

1.977 g/L

Nitrous oxide

Names

Molar mass 44.013 g/mol

Appearance colourless gas

Density 1.977 g/L (gas)

Melting point −90.86 °C (−131.55 °F; 182.29 K)

Answer:

The ratio is  [tex]0.67 : 1[/tex]

Explanation:

From the question we are told that

 The activation energy separating the equatorial and the axial form is [tex]\Delta E = 0.24\ kcal/mol[/tex]

 Generally according to the Boltzmann distribution , the relationship between  concentration(in terms of number of molecule) of the equatorial form and  the concentration of the axial form is mathematically represented as

       [tex]N = N_o e^{-\frac{\Delta E }{RT} }[/tex]

Here [tex]N_o[/tex] is the number of molecule in equatorial form and  N is the number of the molecules in the axial form.

   R is the gas constant with value  [tex]R = 1.987 *10^{-3} \ kcal\cdot mol^{-1} \cdot k^{-1}[/tex]

     T is the temperature of the room with value  [tex]T = 25^oC = 298 \ K[/tex]

So

    [tex]\frac{N}{N_o} = e^{-\frac{0.24 }{1.987*10^{-3} * 298} }[/tex]

=> [tex]\frac{N}{N_o} = 0.67[/tex]

So the ratio of the concentration of equatorial form to the axial form is

      [tex]0.67 : 1[/tex]

Answer:

phosphorus

Explanation:

it reacts by gaining three electrons in its outermost shell to be stable

Answer:List of isotopes

Nuclide Z Isotopic mass (Da)

Excitation energy

63Cu 29 62.9295975(6)

64Cu 29 63.9297642(6)

65Cu 29 64.9277895(7)

Explanation:

Answer:

there is too many electrons around the shell

Explanation:

Explanation:

The First Law of Thermodynamics states that energy cannot be created or destroyed in an isolated system. In other words, energy can be converted from one form into another, but it cannot be created nor destroyed.

Conduction is the transfer of energy from one molecule to another by direct contact. This transfer occurs when molecules hit against each other, which can take place in solids, liquids, and gases.

When you put your cold hands under your legs to warm your hands up, the heat energy from your legs is being transferred to your hands through conduction. However, since energy cannot be created, there is no extra heat energy that can instantaneously replace the heat created by your legs.

Every metabolic process involves energy transfer. Since as the total energy is conserved and thus no loss or gain of energy will be there in a system and to maintain this equilibrium energy transfer from lower energy spot to higher energy spot.

Thermal energy is the energy in the form of heat and which can transfer from one part to the other as any other energy form.

As energy is conserved in a system there will be no net gain or loss of energy overall. Thus energy lost from one part travels to the other parts. Any energy forms transfer from a low intense area to high intense area.

When our hand cools down we may warm them up by rubbing on legs. Where heat energy is transferred from our legs to hands to warm it up. Thus here temperature is given to a colder part from a hot part.

This is an example of heat transfer hence, our legs cools down because some of its temperature is lost to hands still the overall temperature of the body remains balanced.

To find more about heat transfer, refer the link below:

https://brainly.com/question/13433948

#SPJ5