Doing this because I know I'm kickass at Chemistry.
One source would be human emissions. As humans, we use a lot of machines (like power plants) that produce large amounts of carbon dioxide into the atmosphere. The ocean also produces a lot of carbon dioxide via the evaporation cycle. Polluted waters eventually will go into the atmosphere. Volcanoes, even when not erupted, emit a lot of carbon dioxide as well. Dormant underground magma releases carbon dioxide through the Earth's pores, and even when a volcano erupts, it produces carbon dioxide as well.
Give answer fast (C)
☹️☹️☹️☹️☹️☹️
Give two limitations of law of Constant Composition
Answer:
1.The law does not hold true if the different isotopes of the element are involved in making chemical compound.
2.The law is not applicable when elements combine in the same ratio but different compounds are formed.
What is the charge of the nucleus ? Why ?
Answer:
A nucleus is a positive charge
Explanation:
A nucleus is made up of protons and neutrons. Protons have a positive charge and neutrons have a neutral charge.
"You learned about mixtures, especially solutions and the factors that affect their makeup and properties. Why is it important to know the properties of both solutes and solvents when preparing a solution that is expected to meet a certain need?
Does this involve a chemical change or a physical change? Explain."
Can u pls help me
Answer:
its due to the solvents being factored. to be prepared for the solution you would need a chemical change as the solvents get factored so this will mean that it will have a chemical reaction. in this case its slightly different so it will be called a chemical change as 2 different chemicals change and evolve.
Explanation:
Any two difference between short sightedness and long sightednes
Explanation:
tala it is also called myopia lekhnu hai
Äni Arko MA it is also called hypermetropia .
True or False, plz don't answer if you don't know the correct answer
Answer:
The answer is true
Explanation:
Hope this can help
Why does forming bonds release energy? *
What is the percent composition of Phosphorus in Li3PO3
Answer:
you will get 17.983 g of lithium for every 100 g of lithium phosphate.
Explanation:
69.7% is the percent by mass of Lithium in Li[tex]_3[/tex]PO[tex]_3[/tex]. A percent is obtained by multiplying the result by 100.
One approach to show the concentration for an element within a compound or component in a combination is as a mass percentage. The mass percentage is computed by dividing the total weight of the combination by the mass of each component and multiplying the result by 100%. The mass percent is calculated by dividing the mass that contains the compound and solute by the mass for the element or solute.
99.795g/mol = molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex]
6.94g/mol = molar mass of Li
mass percentage of Li=(molar mass of Li/molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex])× 100
=(6.94/99.7)× 100
=69.7%
To know more about mass percentage, here:
brainly.com/question/32197511
#SPJ6
help me with cience for brainest:) its easy:)
Answer:
Stronger
And its science
Explanation:
Answer:
stronger for top.
weaker for bottom.
passed all sciences in freshman year :D
You have a stock solution of HNO3 with a concentration of 4.5 x 10^-4 M. However, you need 275 ml of a 2.50 x 10^-5 M solution. How much of the stock solution will you need?
Answer:
15.28 mL
Explanation:
From the question given above, the following data were obtained:
Molarity of stock solution (M₁) = 4.5x10¯⁴ M
Volume of diluted solution (V₂) = 275 mL
Molarity of diluted solution (M₂) = 2.5×10¯⁵ M
Volume of stock solution (V₁) needed =.?
The volume of the stock solution needed can be obtained by using the dilution formula as illustrated below:
M₁V₁ = M₂V₂
4.5x10¯⁴ × V₁ = 2.5×10¯⁵ × 275
4.5x10¯⁴ × V₁ = 0.006875
Divide both side by 4.5x10¯⁴
V₁ = 0.006875 / 4.5x10¯⁴
V₁ = 15.28 mL
Therefore, the volume of the stock solution needed is 15.28 mL
Question 4
TRUE or FALSE?
The particles in a solid have NO kinetic energy (they do not move).
True
False
Answer: True
Explanation:
Particles vibrate in place but do not move.
Why Do Some Things Stop While Others Keep Going?
Answer:because they run out of energy when it is transferred and to other objects, or their kinetic energy
Explanation:
3. What is the best description of an ionic bond?
A. electrostatic force of attraction between positive and negative ions
B. electrostatic force of repulsion between ions of the same charge
C. nuclear force of attraction between protons of different atoms
D. nuclear force of repulsion between protons of different atoms
The photo shows wires made of pure copper, an element
What would the smallest piece of copper be?
A. Copper atom
B. Mixture of different kinds of metallic elements
C. Copper molecule
D. Compound containing two or more elements
Answer:
B
Explanation:
I hope its right. I'm pretty sure.
Answer:
Explanation:
Copper Atom
What is the molecular formula of a compound that is 51.02 % carbon, 13.80 % hydrogen, and 35.18 %
oxygen? The molecular mass is 88.0 g/mol.
Answer:
Molecular formula = C₄H₁₂O₂
Explanation:
Given data:
Percentage of hydrogen = 13.80%
Percentage of carbon = 51.02%
Percentage of oxygen = 35.18%
Molecular formula = ?
Solution:
Number of gram atoms of H = 13.80 / 1.01 = 13.6
Number of gram atoms of O = 35.18 / 16 = 2.2
Number of gram atoms of C = 51.02 / 12 = 4.25
Atomic ratio:
C : H : O
4.25/2.2 : 13.6/2.2 : 2.2/2.2
2 : 6 : 1
C : H : O = 2 : 6 : 1
Empirical formula is C₂H₆O.
Molecular formula:
Molecular formula = n (empirical formula)
n = molar mass of compound / empirical formula mass
Empirical formula mass = C₂H₆O = 46 g/mol
n = 88 / 46
n = 2
Molecular formula = n (empirical formula)
Molecular formula = 2 (C₂H₆O)
Molecular formula = C₄H₁₂O₂
what is the charge on a calcium (Ca) atom that contains 18e?
Answer:
Ca2+
Explanation:
Question
Your boss is required to provide job safety training:
A) only if you request the training
B) as soon as there are a sufficient number of new employees
C) before you start your job
D) within the first year of your new job
Answer:
C) before you start your job
Explanation:
its the 1st thing to do when ur on a job...i guess not sure but try it anyway....but if im wrong blame
Answer:
I think it's c (before you start your job)
Explanation:
cuz we can get experienced after we are provided job safety training and it is also the first thing we will be given.
sorry if I'm wrong
which personal trait do scientists mainly depend upon when they design an experiment
Answer:
creativity is the personal trait that scientists mainly depend upon when they design an experiment.
How is the rock in the deep mantle similar to the rock in the parts of the mantle nearest the surface? How is it different?
Answer:
Similarity: Rocks within the mantle contain more magnesium and iron than the ones in the crust.
Difference: Rocks in the deep mantle are under intense heat and pressure. In this case, they are semi-solid rocks that flow slowly. On the other hand, the part of the mantle that is nearest to the surface consists of rigid rocks. It has a lower temperature than the rocks in the deep mantle.
Explanation:
Rocks within the mantle contain more magnesium and iron than the ones in the crust.
What is Rocks?
Rocks in the deep mantle are under intense heat and pressure. In this case, they are semi-solid rocks that flow slowly.
On the other hand, the part of the mantle that is nearest to the surface consists of rigid rocks. It has a lower temperature than the rocks in the deep mantle.
According to geologists, a rock is a naturally occurring material made up of crystalline crystals of various minerals that have fused together to form a solid mass.
Therefore, Rocks within the mantle contain more magnesium and iron than the ones in the crust.
To learn more about rocks, refer to the link:
https://brainly.com/question/19930528
#SPJ2
A student is drinking a cup of hot chocolate as they sit by a campfire on a chilly evening. They know that the cup of hot chocolate transfers thermal energy to the surrounding air. The heated air over their cup of hot chocolate expands and rises and is replaced by cooler, denser air.
This method of energy transfer is —
Answer:
A student is drinking a cup of hot chocolate as they sit by a campfire on a chilly evening. They know that the cup of hot chocolate transfers thermal energy to the surrounding air. The heated air over their cup of hot chocolate expands and rises and is replaced by cooler, denser air.
This method of energy transfer is
Explanation:
Answer:
radiation
Explanation:
radiation is when an existing heat source spreads heat to its surroundings
what is tetra atomic molecules?
Answer:
Explanation:
They are the molecules that are formed when four atoms chemically bond together.
Which of the following compounds is least soluble in water?
1) Copper (II) Chloride
2) Aluminum Acetate
3) Iron (III) hydroxide
4) Potassium Sulfate
Answer:
3) iron (iii) hydroxide
Explanation:
what is the temperature in the fahrenheit?
RODINNIS
COURSES
onal Science
Attempt 1 of 2
Which of the following distinctions are used to identify sedimentary rock? Select all that apply.
o where is was formed
conditions it was formed under
n when it was formed
what it is composed of
how many layers it consists of
NEED HELP ASAP (check the picture)
where it was formed and. conditions it was formed under
Do your answers to the previous questions satisfy
the following statements?
A) The dependent variable is changed by the
independent variable.
B) The independent variable causes a change
to another variable.
C) The independent variable is not changed by
another variable.
Answer:
I put B&C
Explanation:
In which highlighted section of the periodic table in the diagram provided above are the elements whose atoms have 1 valence electron located?
A) a
B) b
C) c
D) d
Answer:
B.
Explanation:
Newton's first law of motion explains how
affects an object's motion. According to
Newton's first law, an obiect at rest will stay at
Answer:
rest until and unless an external force is applied.
Explain in a short sentence how you can tell a reaction is a decomposition reaction.
Answer: A decomposition reaction occurs when one reactant breaks down into two or more products.
Mark me as brainilist pls
Someone please answer this...
Answer:
5446.8 J
Explanation:
From the question given above, the following data were obtained:
Mass (M) = 50 g
Initial temperature (T₁) = 70 °C
Final temperature (T₂) = 192.4 °C
Specific heat capacity (C) = 0.89 J/gºC
Heat (Q) required =?
Next, we shall determine the change in the temperature. This can be obtained as follow:
Initial temperature (T₁) = 70 °C
Final temperature (T₂) = 192.4 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 192.4 – 70
ΔT = 122.4 °C
Finally, we shall determine the heat required to heat up the block of aluminum as follow:
Mass (M) = 50 g
Specific heat capacity (C) = 0.89 J/gºC
Change in temperature (ΔT) = 122.4 °C
Heat (Q) required =?
Q = MCΔT
Q = 50 × 0.89 × 122.4
Q = 5446.8 J
Thus, the heat required to heat up the block of aluminum is 5446.8 J
What is the molarity of a 750.0 mL aqueous solution that contains 117 g of NaCl?
Answer:
2.67M
Explanation:
Given: volume of solution = 750.0 mL = 0.750 L Find: molarity
mass of solute = 117 g NaCl
= 58.4428 g/mol (Periodic Table)
Plan: Find the number of moles of solute from the molar mass, then calculate molarity.
Step 1: Find moles of NaCl.
Step 2: Calculate molarity.
Answer: 2.67 M