Answers
Choice-A is the main reason that people use the thing in the picture.
Related Questions
A baby carriage is sitting at the top of a hill that is 21 m high. The carriage with the baby weighs 20
kg. The carriage has
energy. Calculate it
Answers
Answer:
Energy in carriage (Potential energy) = 4,116 J
Explanation:
Given:
Mass of baby = 20 kg
Height = 21 m
Find:
Energy in carriage (Potential energy)
Computation:
The energy accumulated in an object as a result of its location relative to a neutral level is known as potential energy.
In carriage accumulated energy is potential energy.
Energy in carriage (Potential energy) = mgh
Energy in carriage (Potential energy) = (20)(9.8)(21)
Energy in carriage (Potential energy) = 4,116 J
a disk of a radius 50 cm rotates at a constant rate of 100 rpm. what distance in meters will a point on the outside rim travel during 30 seconds of rotation?
Answers
Each minute, the disk completes 100 revolutions, so a point on the rim traverses a distance of 100 times the circumference of the disk and would have a linear speed of
100 rev/min
= (100 rev/min) × (2π × 50 cm/rev) × (1/100 m/cm) × (1/60 min/s)
= 5π/3 m/s ≈ 5.236 m/s
Then after 30 s of rotation, the point would have traveled a distance of
(5π/3 m/s) × (30 s) = 50π m ≈ 157.08 m
A scientist measuring the resistivity of a new metal alloy left her ammeter in another lab, but she does have a magnetic field probe. So she creates a 4.5-m-long, 2.0-mm-diameter wire of the material, connects it to a 1.5 V battery, and measures a 3.0 mT magnetic field 1.0 mm from the surface of the wire. What is the material's resistivity
Answers
Answer:
[tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex]
Explanation:
r = Radius = [tex]\dfrac{2}{2}=1\ \text{mm}[/tex]
B = Magnetic field = 3 mT
1 mm = Distance from the surface of the wire
V = Voltage
x = Distance from the probe = [tex]r+1=1+1=2\ \text{mm}[/tex]
R = Resistance
L = Length of wire = 4.5 m
Magnetic field is given by
[tex]B=\dfrac{\mu_0I}{2\pi x}\\\Rightarrow I=\dfrac{B2\pi x}{\mu_0}\\\Rightarrow I=\dfrac{3\times 10^{-3}\times 2\times \pi 2\times 10^{-3}}{4\pi 10^{-7}}\\\Rightarrow I=30\ \text{A}[/tex]
Voltage is given by
[tex]V=IR\\\Rightarrow R=\dfrac{V}{I}\\\Rightarrow R=\dfrac{1.5}{30}\\\Rightarrow R=0.05\ \Omega[/tex]
Resistivity is given by
[tex]\rho=\dfrac{RA}{L}\\\Rightarrow \rho=\dfrac{0.05\times \pi (1\times 10^{-3})^2}{4.5}\\\Rightarrow \rho=3.49\times 10^{-8}\ \Omega\text{m}[/tex]
The resistivity of the material is [tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex].
One end of a meter stick is pinned to a table, so the stick can rotate freely in a plane parallel to the tabletop. Two forces, both parallel to the tabletop, are applied to the stick in such a way that the net torque is zero. The first force has a magnitude of 2.00 N and is applied perpendicular to the length of the stick at the free end. The second force has a magnitude of 6.00 N and acts at a 42.9o angle with respect to the length of the stick. Where along the stick is the 6.00-N force applied? Express this distance with respect to the end of the stick that is pinned.
Answers
Answer:
x = 0.455 L
Explanation:
For this exercise we must use the rotational equilibrium condition
Σ τ = 0
it has two forces, the first is perpendicular to the rod, so its stub is
τ₁ = F₁ L
the second force is applied with an angle, so we can use trigonometry to find its components
sin θ = F_parallel / F₂
cos θ = F_perpendicular / F₂
F_parallel = F₂ sin θ
F _perpendicular = F₂ cos θ
torque is
τ₂ = F_perpendicular x + F_parallel 0
the parallel force is on the rod therefore its distance is zero
we apply the equilibrium equation
τ₁ - τ₂ = 0
F₁ L = F₂ cos θ x
x = [tex]\frac{L}{cos \theta} \ \frac{F_1}{F_2}[/tex]
let's calculate
x = [tex]\frac{L}{cos \ 42.9} \ \frac{2.00}{6.00}[/tex]
x = 0.455 L
light of wavelength 485 nm passes through a single slit of width 8.32 *10^-6m. what is the single between the first (m=1) and second (m=2) interference minima?
Answers
Answer:
3.35
Explanation:
Got it on Acellus
The light of wavelength 485 nm passes through a single slit. The single between the first (m=1) and second (m=2) interference minima is 3.36°.
What is diffraction?Diffraction is the phenomenon of bending of waves through obstacles.
Given is the wavelength λ= 485 nm, silt width d = 8.32 *10⁻⁶ m, then the angle θ will be
d sinθ =mλ
for m=1, sin θ₁ = λ/d
for m=2, sin θ₂ = 2λ/d
Substitute the values into both expressions to find the angles,
sin θ₁ = 485 x 10⁻⁹ / 8.32 *10⁻⁶
θ₁ = 3.34°
and sin θ₂ = (2 x 485 x 10⁻⁹ )/ 8.32 *10⁻⁶
θ₂ = 6.7°
The angle between m =1 and m=2 will be
θ₂ -θ₁ = 6.7° - 3.34° =3.36°
Thus, angle between the first (m=1) and second (m=2) interference minima is 3.36°.
Learn more about diffraction.
https://brainly.com/question/12290582
#SPJ2
Which of the following is NOT something
the atmosphere does?
A. traps in warmth
B. keeps Earth in a spherical shape
C. provides oxygen to breathe
D. protects Earth from meteoroids
Answers
Answer:
I think the answer is B, keeps Earth in a spherical shape
What is a transfer of energy called?
A. Displacement
B. Acceleration
C. Work
D. Torque
Answers
Which particle needs to be added to this equation to show that the total numbers of neutrons and protons are not changed by the reaction? MARKLING BRAINLIEST 70 points must be correct!
Answers
Answer:
C.
Explanation:
Answer:A
Explanation:ap3x
A hand dryer blows heated air downwards out of the exit duct at a velocity of 4 m/s. The temperature and density of the ambient air at the inlet are 15 C and 1.23 kg/m3, while at the outlet it has temperature 35 C and density 1.15 kg/m3 The blower power is 10.0 W and the heater power is 715 W. Consider the inlet to be at the large mass of ambient air which has negligible velocity.
a) What is the pressure at the outlet? 4 m/s, 35 C
b) You will be applying the energy equation. Why can you ignore any height differences in this situation?
c) If the specific heat of air C-1000 J/(kg K), where Δυ-C Δ T, find the change in internal energy per unit mass from the inlet to outlet.
d) Find the mass flow rate through the dryer.
e) What is the power loss in the system?
f) What is the loss in the system?
g) What is the head loss in the system?
h) What is the total loss coefficient of the system, referred to the outlet velocity?
i) If there were no heater, would the temperature of gas at the outlet be higher, the same, or lower than the inlet? Explain why.
Answers
Answer:
nzkdjdksishdjsdjjdjnzkskejeoueeuieeoyrie ryrhdhcksodopdncndnszdkhfoeosheiwuef wokxkzdkjdoeehxjbxbdkeiehdhdhddjjddjdhhdhdhhhjdhfjdjjfjddhdheudiwiehdbejwowud
Explanation:
isos
types of wave interactions include
Answers
Refraction
Diffraction
Hope this helps :))
A scientist notices that an oil slick floating on water when viewed from above has many different colors reflecting off the surface, making it look rainbow-like (an effect known as iridescence). She aims a spectrometer at a particular spot and measures the wavelength to be 750 nm (in air). The index of refraction of water is 1.33.
Part A: The index of refraction of the oil is 1.20. What is the minimum thickness of the oil slick at that spot? t= 313nm
Part B: Suppose the oil had an index of refraction of 1.50. What would the minimum thickness be now? t=125nm
Answers
Answer:
a) The minimum thickness of the oil slick at the spot is 313 nm
b) the minimum thickness be now will be 125 nm
Explanation:
Given the data in the question;
a) The index of refraction of the oil is 1.20. What is the minimum thickness of the oil slick at that spot?
t[tex]_{min[/tex] = λ/2n
given that; wavelength λ = 750 nm and index of refraction of the oil n = 1.20
we substitute
t[tex]_{min[/tex] = 750 / 2(1.20)
t[tex]_{min[/tex] = 750 / 2.4
t[tex]_{min[/tex] = 312.5 ≈ 313 nm
Therefore, The minimum thickness of the oil slick at the spot is 313 nm
b)
Suppose the oil had an index of refraction of 1.50. What would the minimum thickness be now?
minimum thickness of the oil slick at the spot will be;
t[tex]_{min[/tex] = λ/4n
given that; wavelength λ = 750 nm and index of refraction of the oil n = 1.50
we substitute
t[tex]_{min[/tex] = 750 / 4(1.50)
t[tex]_{min[/tex] = 750 / 6
t[tex]_{min[/tex] = 125 nm
Therefore, the minimum thickness be now will be 125 nm
Which of the following happens to
density as air pressure decreases?
С C
A. Density increases.
B. Density stays the same.
C. Density decreases.
D. There is no correlation between air pressure and
density.
Answers
Explanation:
As pressure increases, with temperature constant, density increases. Conversely when temperature increases, with pressure constant, density decreases. Air density will decrease by about 1% for a decrease of 10 hPa in pressure or 3 °C increase in temperature.
A 0.70-kg disk with a rotational inertia given by MR 2/2 is free to rotate on a fixed horizontal axis suspended from the ceiling. A string is wrapped around the disk and a 2.0-kg mass hangs from the free end. If the string does not slip then as the mass falls and the cylinder rotates the suspension holding the cylinder pulls up on the mass with a force of______
Answers
Answer:
The force will be "9.8 N".
Explanation:
The given values are:
mass,
m = 0.7 kg
M = 2
g = 9.8
Now,
⇒ [tex]\tau = T \alpha[/tex]
then,
⇒ [tex]\frac{1}{2}mR^2(\frac{1}{R}\frac{dv}{dt}) =M(g-a_t)R[/tex]
⇒ [tex]\frac{1}{2}m \ a_t=m(g-a_t)[/tex]
⇒ [tex]a_t=\frac{2g}{(\frac{m}{M} +2)}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{2\times 9.8}{\frac{0.7}{2} +2}[/tex]
⇒ [tex]=8.34 \ m/s[/tex]
hence,
⇒ [tex]T=mg+M(g-a_t)[/tex]
On substituting the values, we get
⇒ [tex]=0.7\times 9.8+2(9.8-8.34)[/tex]
⇒ [tex]=6.86+2(1.46)[/tex]
⇒ [tex]=6.86+2.92[/tex]
⇒ [tex]=9.8 \ N[/tex]
The elastic energy stored in your tendons can contribute up to 35 % of your energy needs when running. Sports scientists have studied the change in length of the knee extensor tendon in sprinters and nonathletes. They find (on average) that the sprinters' tendons stretch 41 mm , while nonathletes' stretch only 33 mm .
Answers
Hello. Your question is incomplete. However, I managed to find it completely on the internet and I realized that you forgot to mention that the question asks you for the maximum energy difference between velovistas and non-athletes, considering that the spring constant for the tendon of the two groups is equal to 33n/mm.
To make this calculation you will need to use Hooke's law, using the formula: ¹/2*K*x², where "K" will be the value of the spring constant for the tendon and "X" will be the value of the sprinter and non-athlete terms.
So for the sprinter we will have the calculation:
¹/2*33*41² -------> 0,5*33*1681 = 27736. 5 Nmm
(To facilitate the calculation, first solve the division of ¹/2 and then multiply 41 by 41, lastly, just multiply all the results.)
For the non-athlete we will have the calculation:
¹/2*33*33² -------> 0,5*33*1089 = 17968. 5 Nmm
(To facilitate the calculation, first solve the division of ¹/2 and then multiply 41 by 41, lastly, just multiply all the results.)
Now, to reach the final result, you only need to subtract the two values presented by the sprinter and the non-athlete.
27736.5 - 17968.5 = 9768 Nmm
9.2 True/False Questions
1) Unsatisfying relationships can interfere with your well-being.
Answer:
2) One way to tell if a relationship is unhealthy is that you are unhappy.
Answer:
3) Managers at large companies are more involved in the day-to-day operations of their businesses than entrepreneurs.
Answer:
4) Being an effective member of a team depends entirely on the project's outcome.
Answer:
5) Teams are influenced by the personal qualities of the team members.
Answer:
Answers
What is the importance of using locally available resources in creating art?
Answers
Answer:
please give me brainlist and follow
Explanation:
Using locally available resources for art help in the preservation of environment. A significant and practical aspects of art is material significance. The items used by artists while making an art piece affects both the form and the material. Every material delivers something special in the creative process.
What is the speed of a ball that is attached to a string and swings in a horizontal circle of radius 2.0 m with the central acceleration of 15 m/s^2?
Answers
Answer:
5.48 m/s.
Explanation:
Use the formula a=v^2/r.
If an object went from 0 m/s to 6 m/s in 1.7 seconds after a 10 N force was applied to it; what is the object's mass? No links pls
Answers
The force acting on the object is constant, so the acceleration of the object is also constant. By definition of average acceleration, this acceleration was
a = ∆v / ∆t = (6 m/s - 0) / (1.7 s) ≈ 3.52941 m/s²
By Newton's second law, the magnitude of the force F is proportional to the acceleration a according to
F = m a
where m is the object's mass. Solving for m gives
m = F / a = (10 N) / (3.52941 m/s²) ≈ 2.8 kg
The liquid emerges into a vertical jet as it drains from the container, with the velocity profile in the jet remaining uniform. The outlet of the container is located 2.0 m above ground, and the radius of the emerging liquid jet changes with vertical distance from the bottom of the container as it accelerates under the action of gravity. Neglecting viscous losses and surface tension effects in the liquid jet, what is the velocity of the water jet as it strikes the ground when the container begins to drain
Answers
Answer:
6.26 m/s
Explanation:
Since we are neglecting viscous losses and surface tension effects in the liquid jet, by conservation of energy, the potential energy loss of the jet = kinetic energy gain of the jet
So, mgh = 1/2mv² where m = mass of water in jet, g = acceleration due to gravity = 9.8 m/s², h = height of outlet = 2.0 mand v = velocity of liquid jet
So, mgh = 1/2mv²
gh = 1/2v²
v² = 2gh
v = √(2gh)
v = √(2 × 9.8 m/s² × 2.0 m)
v = √(39.2 m²/s²)
v = 6.26 m/s
The following statements address the science behind the pulley system illustrated:
A. The pulleys increase the entropy of the system.
B. The force applied to the rope is less than the force needed to lift the object.
C. The pulleys help generate as much energy as possible.
D. The pulleys multiply energy input, resulting in more energy output.
E. The pulleys generate no thermal energy.
Which of these statements is/are true?
i. Statements A and B
ii. Statements D and E
iii. Only statement C
iv. All of the statements
Answers
Answer:
i. Statements A and B
Explanation:
Sana nakatulong
the higher the objects " ? ", the more kinetic energy
Answers
STEP BY STEP EXPLANATION:
Hi please zoom in to see it clearly, uh you don’t have to answer them all but it would be nice !!! (no links please)
Answers
Answer:
3. (a) - is the answer most likely
4: (a)
5 (d or c)
6 (b)
what is an example of vaporization?
Answers
Answer:
just search it up you'll get ur answer
2. Plastic is a great conductor of charge so it moves quicker.
True
False
Answers
Answer:
the answer is false
Explanation:
plastic doesnt conduct anything
a 4.5 Hz wave has a wavelength of 0.8m. what is the speed
0.18 m/s
5.6m/s
5.3m/s
3.6m/s
Answers
Answer:
Explanation
I hope this help.
Step-by-step explanation
λ= 0,8m
f(frequency)= 4,5Hz
v = f × λ
v = 4,5 × 0,8
v = 3,6m/s
explain the refraction of light on a glass slab
Answers
Answer:
refraction is the change in direction of a wave passing from one medium to another or from a gradual change in the medium.
why is potassium and sodium considered as reactive metals?
Answers
Answer:
because they are found freely in nature uncombined so they are highly reactive with other elements
Hopefully this helps you! Have a great day!
❤️
would it be m/s or kg?
Answers
Answer:
m.s
Explanation:
Which of the
following
DECREASES
as you go UP a
mountain?
A. climate
B. altitude
C. amount of oxygen
D. buoyancy
Answers
The others either change but don’t decrease or they increase.
Answer:
C. Amount of oxygen
Explanation:
Options A and D are invalid as they aren't affecting factors.
Option B is false as the altitude increases as you go up a mountain.
Option C is true as the air pressure (atmospheric pressure) is inversely proportional to the height/altitude of the mountain.
Please answer this for 15 points please don’t put in a link.
Answers
Answer:
c. Double Replacement
Explanation:
As in Double Replacement reaction exchanges the cations (or the anions) of two ionic compounds.
Here, in BaCl2 , Ba has replaced with NO3 to form Ba(NO3)2
and in 2AgNo3 , Ag has replaced with Cl to form 2AgCl.