A quality assurance plan would cover the procedures to be utilized to make sure the software complies with the requirements.
Explain about the quality assurance plan?The criteria and procedures that will guarantee and confirm that the data fulfil particular data-quality goals throughout the Data Lifecycle are defined in a Quality Assurance Plan (QAP).
Process checklists, process standards, process documentation, and project audit are a few examples of quality assurance activities. Inspection, peer reviews of deliverables, and software testing are a few examples of quality control procedures.
A QA program ensures laboratory management and project investigators that documented requirements for the quality of facilities, equipment, people training, and work performance are being met, and if not, to identify and report the areas that need improvement to meet those standards.
Quality control provides you with detailed information about the demands, desires, and satisfaction of your clients as well as the effectiveness of your agents.
To learn more about quality assurance plan refer to:
https://brainly.com/question/13876752
#SPJ4
three digital clocks a, b, and c run at different rates and do not have simultaneous readings of zero. the figure shows simultaneous readings on pairs of the clocks for four occasions. (at the earliest occasion, for example, b reads 25.0 s and c reads 92.0 s.) if two events are 600 s apart on clock a, how far apart are they on (a) clock b and (b) clock c? (c) when clock a reads 380 s, what does clock b read? (d) when clock c reads 11 s, what does clock b read? (assume negative readings for prezero times.)
The answer of the following question of digital clocks are: (a) clock b and a is 92:38, (b) clock c and clock A is 92:38, (c) when clock a reads 380 s, clock b reads 285.3 s, (d) when clock c reads 11 s, the clock b reads 8.5s.
What is digital clocks?
Digital clocks are electronic clocks that use a digital display to show the time. They often use an LED or LCD display to show the time in a digital format, usually in hours and minutes. Digital clocks are a more accurate and convenient way for people to keep track of time.
(a) Clock B: 600 s apart on clock B will be about 484.4 s apart, as the ratio between clock B and clock A is 25:38.
(b) Clock C: 600 s apart on clock C will be about 828.3 s apart, as the ratio between clock C and clock A is 92:38.
(c) Clock B: When clock A reads 380 s, clock B will read about 285.3 s. In the earliest occasion, clock B reads 25s and clock A reads 38s. This gives us a ratio of 25:38. We can use this ratio to calculate the time on clock B when clock A reads 380s. 380s × (25/38) = 285.3 s.
(d) Clock B: When clock C reads 11s, clock B will read about 8.5s. In the earliest occasion, clock B reads 25s and clock C reads 92s. This gives us a ratio of 25:92. We can use this ratio to calculate the time on clock B when clock C reads 11s. 11s × (25/92) = 8.5s.
To learn more about digital clocks
https://brainly.com/question/14789297
#SPJ4
Why Am I Unable to Connect to the Login Queue in 'League of Legends'?
Another simple explanation for why you might be unable to join to the League of Legends queue is poor internet access. to ensure that this won't be a problem.
Why Can't I Connect to the League of Legends Login Queue?Try relaunching League of Legends first. When attempting to fix a connectivity problem, this is always the first thing to take because it's probable that Riot's servers are at blame. Try restarting your computer if it doesn't resolve the problem because there might be one there as well. Look into your internet connection.
How can the League of Legends login line be fixed?Potential Fixes for the League of Legends Login Queue Error Checking everything should be your initial step. ensure that your internet The connection is functional, and the wires are all properly attached. Even if they are, it might be beneficial to detach, then reconnect.
To know more about Queue visit:-
https://brainly.com/question/29804483
#SPJ4
you are given three variables p, q, and r of type person. the three variables have been correctly initialized. write a piece of code that writes the initial value of p in q, the initial value of q in r, and the initial value of r in p. try to make your code as compact as possible
This code is very concise and efficient in swapping the initial values of the three variables.
Write a piece of code that writes the initial value of p in q, the initial value of q in r, and the initial value of r in p?The following code can be used to write the initial value of p in q, the initial value of q in r, and the initial value of r in p:p, q, r = Person(), Person(), Person()
p.__dict__, q.__dict__, r.__dict__ = q.__dict__, r.__dict__, p.__dict__
This code takes advantage of the fact that the Person class has a __dict__ attribute, which is a dictionary that contains all the instance variables of the object.The code simply swaps the values of the __dict__ attributes of the three Person objects, which allows us to write the initial value of p in q, the initial value of q in r, and the initial value of r in p.This code is quite compact and is easy to read and understand, making it an ideal choice for solving this problem.p.name = q.name;
q.name = r.name;
r.name = p.name;
The code first stores the initial value of p in q, then the initial value of q in r, and finally the initial value of r in p. This effectively swaps the initial values of the three variables and ensures that each variable contains the initial value of the other two.This code also takes advantage of the fact that the variables are of type person, as it uses the name property of the person objects to swap values. This code is also very compact and easy to read, making it an ideal solution for swapping the initial values of the three variables.To learn more about a piece of code that writes the initial value refer to:
https://brainly.com/question/28498224
#SPJ4
Go to the Grid Columns Style section. Create a style rule to float every div element whose class name begins with column on the left. Create style rules for div elements belonging to the following classes:. Column100,. Column50,. Column33,. Column67,. Column25,. Column75,. Column20,. Column40,. Column60, and. Column80 so that the width of each column is a percent equal to the size value. For example, div elements belonging to the. Column100 class should have widths of 100%,. Column50 should have widths of 50%, and so forth. Note: Use 33. 33% for. Column33 and 66. 67% for. Column67
A grid column is a vertical track and the area between two vertical grid lines in a CSS Grid Layout. The grid-template-columns property, as well as the abbreviated grid and grid-template properties, define it.
In CSS grid, how can I create three columns?Through the use of grid-template-columns: If you type repeat(3, 1fr) on a grid container, you will get a layout with 3 columns that are all the same width. Grid layout will automatically make all the objects in each row the same height. The solution is worth saving.
I need to set the grid's columns and rows.To begin, you must establish a container element, set the column and row sizes using grid-template-columns and grid-template-rows, and then add its child elements to the grid with grid-column and grid-row.
To know more about grid column visit :-
https://brainly.com/question/10937580
#SPJ4
0.0% complete question a security engineer implements port security on a hardware firewall. which osi model layer identifies the application ports to configure?
The ports are specified in the OSI model's fifth layer, which creates and regulates communication between the source and destination. During the dialogue establishment procedure, ports are defined.
Which OSI layer is in charge of specifying port numbers?The ports are specified in the OSI model's fifth layer, which creates and regulates communication between the source and destination. During the dialogue establishment procedure, ports are defined. The OSI model's Layers 5, 6, and 7 are combined into a single Layer in the TCP/IP model.
What layer of the OSI does a firewall operate on?On layers 3 and 4 of the OSI model, a firewall typically operates. TCP and UDP operate on Layer 4, the Transport Layer, while Layer 3 is the Network Layer, where IP operates. Today's firewalls are frequently OSI layer 7 (the application layer) capable, having risen up the OSI layers.
To know more about OSI model visit:-
https://brainly.com/question/13439310
#SPJ4
Answer:
yes (sry for not giving the answer i just need the points) sryyyyyy
Explanation:
an agent that is authorized to perform any and all acts associated with a specific service is known as a(n): select one: a. special agent b. general agent c. universal agent d. subagent
An agent that is authorized to perform any and all acts associated with a specific service is known as a general agent.
Who is the legal general agent?
The term "general agent" can refer to either a person chosen by a life or health insurer to manage its operations in a particular region or to an employee with sufficient authority to conduct the company's legal business on behalf of a principle. A property manager who consistently represents clients would be an example of a general agent. Another illustration might be a customer who requests that you manage numerous real estate transactions on their behalf. A general power of attorney may be used to give general agency. Attorneys, who represent their customers in legal proceedings, and stockbrokers, who are employed by investors to make financial decisions, are two popular sorts of agents.
Learn more about the agent here: https://brainly.com/question/14301808
#SPJ4
For the first time, a tech company plans to deploy an AI-powered robot in court as a... A Defense lawyer B Expert witness C Judge D AI-powered robot
The idea was devised by the business DoNotPay, whose CEO, Joshua Browder, claims that this will be the first instance in which AI-powered is used in a court.
What was the first robot that was guided by AI?Shakey the Robot is on display at the Computer History Museum. Due of its nature, the project includes research in robotics, computer vision, and natural language processing. As a result, it was the first initiative to integrate reasoning with actual action.
In court, is AI admissible?The majority of courtrooms, though, forbid the use of technology. Many courtrooms are inaccessible to robot attorneys because many states require that all parties provide their consent before any recording may be made. Among the 300 cases DoNotPay considered, just a few an attorney robot trial.
To know more about AI-powered visit:-
https://brainly.com/question/30312528
#SPJ4
All of the salespeople in Super Star Media Sales use laptops so that they can take their applications and data on the road to client sites. One of the salespeople, Stan, has a docking station so that his laptop easily connects to a printer and external monitor when the is in the office. What should you do to ensure that Windows 10 uses the proper device drivers when Stan is in and out of the office? Why?
Use the Quick Link menu shortcut for this tool to launch it. You may enter the Quick Link menu by right-clicking Start or by pressing Windows key + X.
What aspect of a driver is most crucial?One of the most crucial qualities a driver can possess is patience. Every day, patience will be tried by heavy traffic, road construction, parking, and other drivers' behavior. Aggression, poor decision-making, and ultimately accidents can result from impatience.
What do drivers for Windows 10 do?A driver, also known as a device driver, is a group of files that communicate with an operating system on a computer to instruct a piece of hardware how to operate. All hardware, including the internal computer parts like your graphics card, requires a driver.
To know more about Windows 10 visit:-
https://brainly.com/question/28524519
#SPJ4
the ipsec authentication header (ah) protocol is used to ensure that packets get to the receiver in no time at all. true or false?
Data origin authentication, data integrity, and replay prevention are all provided by the Authentication Header (AH) protocol. Your data is transmitted in clear view because AH does not offer data confidentiality.
What does the IPsec authentication header do?The following protocols are used by IPsec to carry out a variety of tasks: For IP datagrams, Authentication Headers (AH) offers connectionless data integrity, data origin authentication, and defence against replay attacks.
How does the tunnel mode and transport mode in AH's authentication header protocol work?An AH header and a new IP header are added in the case of AH tunnel mode. An ESP header, a new IP header, an ESP trailer, and an ESP authentication trailer are added for ESP tunnel mode.
To know more about data visit:-
brainly.com/question/16011753
#SPJ4
explain the difference between external, internal, and conceptual schemas. how are these different schema layers related to the concepts of logical and physical data independence?
Data abstraction typically occurs at three schema levels: Internal Level: Actual PHYSICAL access routes and storage architecture. Conceptual or Logical Level: Database limitations and structure as a whole external or viewpoint level.
How do these many layers of the schema relate to the idea of logical and physical data independence?All of the schemas are logical, and the actual data is kept on the disk in bit format. Changes to the physical data can be made without having an effect on the schema or logical data if you have physical data independence.
Which three layers comprise the three-schema architecture?a system for controlling data access that consists of three layers or schemas: the external or programming view, the conceptual or data administration view, and the internal or database administration view.
To know more about schema layers visit:-
https://brainly.com/question/18959128
#SPJ4
a new employee has just started work, and it is your job to give her administrator access to the aws console. you have given her a user name, an access key id, a secret access key, and you have generated a password for her. she is now able to log in to the aws console, but she is unable to interact with any aws services. what should you do next?
Grant her Administrator access by adding her to the Administrators' group.
What is AWS console?
A online application called the AWS Management Console includes and refers to a large number of service consoles for controlling AWS services. The console's home page is displayed when you first log in.
In order to connect with more than 250 AWS services while on the road, iOS users may now access AWS CloudShell through a mobile-friendly UI and run scripts using the AWS command-line interface (AWS CLI).
Author's Note For pre-professional students, Amazon Web Services (AWS) Educate is specifically created. The initiative gives participants free access to educational materials and AWS services aimed at enhancing their cloud computing knowledge and abilities.
An online platform called Amazon Web Service offers scalable and affordable cloud computing solutions.
Read more about AWS console:
https://brainly.com/question/14014995
#SPJ4
what is the default access specifier for data members or member functions declared within a class without any specifier, in c ?
Answer:
nothing
Explanation:
C is a programming language that was developed in the early 1970s, it doesn't have built-in support for object-oriented programming concepts like classes, inheritance, and access specifiers. Struct and union are used for grouping data and doesn't have the same functionality as classes in C++. It doesn't have access specifiers such as public and private. The code written in C is still widely used today, but if you want to use object-oriented programming and access specifiers, you will need to use a language like C++ or Java.
true or false? a man-in-the-middle attack takes advantage of the multihop process used by many types of networks.
False. A man-in-the-middle attack takes advantage of the communications between two systems, rather than the multihop process used by networks.
This can be done by either exploiting a vulnerability in the communication protocol of the two systems, or by gaining access to the communication channel between the two systems.Exploring the Nature of a Man-in-the-Middle AttackA man-in-the-middle attack is a type of cyber-attack in which a malicious actor intercepts the communications between two systems. This type of attack allows the attacker to access sensitive data or manipulate the communication in some way. It does not exploit the multihop process used by many types of networks, but rather takes advantage of the communication between two systems.
Learn more about Network: https://brainly.com/question/8118353
#SPJ4
write a program that reads integers user num and div num as input, and outputs user num divided by div num using floor division. then it will divide that result by div num again using floor division, and then divide that result a third time using floor division. for example, if the user number input is 25, and the dividing number is 3, 25 divided by 3 is 8 remainder 1, 8 divided by 3 is 2 remainder 2, and 2 divided by 3 is 0 remainder 2. so the program should output 8 2 0 another example is below: ex: if the input is:
The given output is 1000, 500, and 250, and the input is 2000, 2. The expected output matches the provided outputs of 1000, 200, and 250.
What is the output of the programme ?
Any data that a computer or other electronic device processes and sends out is referred to as output. Anything that can be seen on your computer's monitor, such as the text you write on the keyboard, is an example of output. A human cannot interact with a computer without some form of output that they can see, feel, or hear. The image's lower half displays information that was transmitted from a computer to a printer. The paper is regarded as an output once the printer has finished producing its physical copy.
If this is the input:
2000
2
The output is then:
1000 500 250
I have the following code:
user_num = int(input( ))
x= int(input())
for i in range(3):
user_num/= x
print ( int( user_num), end= ' ' )
To learn more about programme refer to :
brainly.com/question/28873457
#SPJ4
A TCP session opening ends with a(n) ________ message. Group of answer choices ACK FIN SYN IP
Connection is made when the client replies with an ACK (acknowledge) message. A SYN flood attack involves the attacker repeatedly sending SYN packets to all targets.
the start of a TCP session What is the name of the first transferred segment?A unique TCP segment is first sent from the client-side TCP to the server-side TCP. The application-layer data is not present in this unique segment. However, it does have the so-called SYN bit, one of the flag bits in the segment's header (see Figure 3.3-2), set to 1.
When a TCP entity wants to end a connection, which flag bit in the TCP header needs to be set?To end a TCP connection, use the FIN bit. If the FIN bit is set to 1, the receiver will be informed that the sender intends to break the link. The FIN bit is set to 1 in the FIN segment sent for TCP Connection Termination.
To know more about TCP session visit:-
https://brainly.com/question/17019049
#SPJ4
which tool allows a user to store organized information that can easily be accessed, edited and queried?
More than just a column, a field is a way to categories data according to its type. Each piece of data in a field belongs to the same type. For instance, each entry in a field labelled First Name or Street Address would be a name or address, respectively.
What purpose do a database's tables and queries serve?The majority of the time, they are used to retrieve specific data from the tables. Queries enable you to view data that is typically dispersed across multiple tables in a single datasheet.
What purposes serve databases?Any type of data can be stored, maintained, and accessed using databases.
To know more about databases visit:-
brainly.com/question/29775297
#SPJ4
Realizati un program care calculeaza si afiseaza suma tuturor numerelor divizibile cu x si y
cuprinse intre a si b, unde x, y, a, b sunt numere naturale citite de la tastatura, a
Answer:
Here's one way you could write the program in Python: x = int(input("Enter x: "))
y = int(input("Enter y: "))
a = int(input("Enter a: "))
b = int(input("Enter b: "))
sum = 0
for i in range(a, b+1):
if i % x == 0 and i % y == 0:
sum += i
print("The sum of all numbers divisible by", x, "and", y, "between", a, "and", b, "is", sum)
This program takes input for x, y, a, and b, then uses a for loop to iterate through the range of numbers from a to b, inclusive. For each number in the range, it checks if it is divisible by both x and y using the modulus operator (%). If a number is divisible by both x and y, it is added to the sum. Finally, the program prints the final sum.
question 8 scenario 2, continued now, your interviewer explains that the data team usually works with very large amounts of customer survey data. after receiving the data, they import it into a sql table. but sometimes, the new dataset imports incorrectly and they need to change the format. she asks: what function would you use to convert data in a sql table from one datatype to another?
A value of one type can be converted to another type using SQL server's CONVERT() function. The to expression will be translated to the specified target data type, such as INT or BIT.
Explain about the SQL table?Data in a database is organized into tables, which are database objects. Similar to a spreadsheet, tables have rows and columns where the data is systematically arranged. A unique record is represented by each row, and each field in the record is represented by a column.
CREATE TABLE also allows you to make a duplicate of an existing table. The column definitions are transferred to the new table. There is an option to pick all columns or a subset of columns. The values from the old table will be transferred over to the new table if you create one from an existing one.
In SQL, searching the INFORMATION SCHEMA views is the simplest way to find all tables. The information structure must first be specified before the "tables" view.
To learn more about SQL table refer to:
https://brainly.com/question/29495392
#SPJ4
what are some tools to customize a personal wellness plan?
Make Your Own Wellness Plan Check Your Physical Wellness Right Now.Learn which exercise is best for you.Find out what nutrition you need and what you're getting.Sleep the appropriate amount of time.Change Your Individual Wellness Plan.
Which 7 areas for personal wellbeing are there?Seven different aspects of wellness are typically considered to exist: mental, physiological, social, financial, religious, environmental, and occupational.These factors interact and have an impact on one another.The other dimensions of our well-being are impacted when one dimension is out of balance.
How does a wellness strategy look?A wellbeing plan is a set of actions you design to meet your individual needs in relation to your physical, mental, emotional, financial, and environmental well-being, among other areas of your life.
To know more about Wellness Plan visit:
https://brainly.com/question/14748613
#SPJ4
2. what problem would you encounter if you wanted to produce a listing by city? how would you solve this problem by altering the file structure?
Errors that were absent from the simulation but would have been seen as a result of actual field input.
The field experiment was simulated in order to exclude any potential outside influences that might have had an impact on the outcome of the experiment. Based on historical data on natural variables like temperature and humidity, scientists are able to anticipate mistakes in the field and work around them to achieve the desired outcome. As of right now, the values offs are provided, but we are not told of the values of the absorbances needed to determine the concentrations (given path length 1 cm). So, this is the potential experimental issue. The substance doesn't absorb in the visible zone when at rest. Therefore, the most popular spectrometer cannot be used in this situation. Instead, we must first identify the part of the electromagnetic spectrum that this molecule absorbs.
Learn more about Potential experimental here:
https://brainly.com/question/29562907
#SPJ4
Find the position of element 21 using binary search method in array ‘A’ given below :
A = { 11 , 5 , 21 , 3 , 29 , 17 , 2 , 45 }
[tex] \: [/tex]
[tex] \: [/tex]
[tex] \: [/tex]
[tex] \: [/tex]
ty :-;
The position of element 21 in the array A = {11, 5, 21, 3, 29, 17, 2, 45} is 6.
How to determine the position of 21From the question, we have the following parameters that can be used in our computation:
A = { 11 , 5 , 21 , 3 , 29 , 17 , 2 , 45 }
Sort the array
A = {2, 3, 5, 11, 17, 21, 29, 45}
Next, we use the following steps:
Initialize two pointers, left pointer (l) and right pointer (r) to the first and last elementsFind the middle element using (l+r)/2. i.e Middle = 17Compare the middle element with the element being searched for i.e. 21 > 17Update the left pointer to the middle element + 1 i.e. 21Repeat steps 2-4 until the element is found or the search interval is empty.In this case, we have A[6] = 21So, the position of element 21 in the array A is 6.
Read more about binary search at
https://brainly.com/question/21475482
#SPJ1
Place the steps in correct order:
1. Open the sent messages
2. Make additions/edits
3. Click actions
4. Choose resend the message
(correct order as listed here)
The correct order is:
1. Open the sent messages
2. Click actions
3. Make additions/edits
4. Choose resend the message
Which kind of malware provides an attacker with administrative control over a target computer through a backdoor?
(a) Remote Access Trojan (RAT)
(b) Potentially Unwanted Program (PUP)
(c) Crypto-malware
(d) Trojan horse
A type of malware called Remote Access Trojan (RAT) gives an attacker backdoor access to the administrative panel of a target machine.
Which type of malware gives an attacker administrative access to a target?RAT malware enables remote access and control of a victim's computer. The malware, which is spread by phishing emails, malicious websites, or infected software, when it has been installed on the victim's machine, develops a backdoor that gives the attacker unrestricted access and control.
What sort of malware enables an attacker?Keylogging, virus or worm installation, data theft, and backdoor access to a device are all capabilities of trojans. Attackers can manipulate an infected device using remote access Trojans (RATs).
To know more about Remote Access Trojan visit:-
https://brainly.com/question/14479079
#SPJ4
Open the debug3-4. Css file. The body element should have a width that is 90% of the width of the browser window ranging from a minimum of 600 pixels up to a maximum of 1024 pixels. Fix the syntax errors in the body style rule that defines the width of the web page. The style rule for the body element sets up a grid layout for the page. However, there are several errors in defining the grid areas, grid columns, and grid gaps. Fix the syntax errors in the style rule
charset "utf-8";
/* New Perspectives on HTML5 and CSS3, 8th Edition Tutorial 3 Coding Challenge 4 Author: Matthew Arigoni Date: 10/06/2020 Filename: debug3-4.css */
/* Page Body Styles */
body {
width: 90vw; /* 90% width of browser window*/
min-width: 600px; /* min-width */
max-width: 1024px; /* max-width */
margin: 10px auto;
display: grid;
grid-template-columns: 200px auto 200px;
grid-template-areas: 'header header header'
'link link link'
'nav main side'
'nav coupons side'
'footer footer footer';
grid-gap: 10px 25px; /* remove the / sign */
}
/* Grid Areas */
header {
grid-area: header;
}
nav.horizontal {
grid-area: link;
}
nav.vertical {
grid-area: nav;
}
article {
grid-area: main;
}
section {
grid-area: coupons;
}
aside {
grid-area: side;
}
footer {
grid-area: footer;
}
/* Image Styles */
header img {
display: block;
width: 100%;
}
/* Horizontal Navigation List Styles */
nav.horizontal ul {
width: 100%;
display: grid;
grid-template-columns: repeat(5, 1fr); /* grid-template-columns, not grid-columns-template*/
}
nav.horizontal ul li {
display: block;
text-align: center;
}
/* Coupon Section Styles */
section {
display: grid;
grid-template-columns: repeat(3, 1fr);
grid-gap: 20px;
}
section div {
outline: 4px dashed gray;
position: relative;
}
section div p:last-of-type { /* use : symbol instead of just a dot for :last-of-type */
position: absolute;
bottom: 1px;
right: 5px;
}
To know more about syntax errors visit:
https://brainly.com/question/28957248
#SPJ4
To copy by dragging in Windows, hold the ____ key while you drag.
To copy by dragging in Windows, hold the CTRL key while you drag.
Where are input and output data stored in a buffer?The information kept in a stay clear is always kept on a physical device.Because RAM has a significantly faster access time than hard disk drives, most buffers are implemented by software, which often uses the faster RAM for store temporary data.
Which action deletes a folder and everything inside it?Right-click just on file and choose Delete from the menu to delete it along with any associated folders or selected files.The Delete button on the keyboard can also be used when the file is selected.A folder's contents are also deleted when it is deleted.
To know more about Windows visit:
https://brainly.com/question/8112814
#SPJ4
Write a class RangeInput that allows users to enter a value within a range of values that
is provided in the constructor. An example would be a temperature control switch in
a car that allows inputs between 60 and 80 degrees Fahrenheit. The input control has
"up" and "down" buttons. Provide up and down methods to change the current value.
The initial value is the midpoint between the limits. As with the preceding exercises,
use Math. Min and Math. Max to limit the value. Write a sample program that simulates
clicks on controls for the passenger and driver seats
Answer:
UHHHM
Explanation:
items used to measure software authenticity
The physical things you can touch that make up a computer
The physical things you can touch that make up a computer are monitor, mouse, keyboard, and CPU.
What is computer?A computer can be defined as an electronic device which accepts data, processes data and brings out information known as results.The computer is used to type and edit different forms of documents like word, PDF and Excel.
A computer can be used to perform business transactions online. It is used by both sellers and buyers to market and purchase product respectively.A computer can be used to play music, watch movies and play games.
Therefore, The physical things you can touch that make up a computer are monitor, mouse, keyboard, and CPU.
Learn more about CPU on:
https://brainly.com/question/16254036
#SPJ1
Finish the format string to get the output shown below.
'Answer: 0.99'
'Answer: {
}' .format(0.987654)
The above output of format string is 'Result:{___}' .format(0.2345789) will be 4.2f.
What is a format string?The Format String, an ASCII Z string that comprises text and format parameters like printf ("The magic number is:%dn," 1911), is the argument to the Format Function. The Format String Parameter, like%x%s, specifies the format function's conversion type.In the formatted input and output functions, the Format specifier is a string. The input and output formats are decided by the format string. A '%' character always precedes the format string. The printf() function's most frequently used format specifiers are: specifier for formats.Python's String format() function is used to convert, replace, or replace placeholders in a string with valid values in the final string.Given data :
The ^ symbol centers 'Root' in a field eight characters wide. 4.2f rounds to two decimal places and places the number in a field 4 characters wide.
Thus, 4.2f will be the output.
Learn more about format string refer to ;
https://brainly.com/question/28989849
#SPJ1
Answer:
8.2f
Explanation:
yep
the transmission control protocol (tcp) and internet protocol (ip) are used in internet communication. which of the following best describes the purpose of these protocols? responses to ensure that communications between devices on the internet are above a minimum transmission speed to ensure that communications between devices on the internet are above a minimum transmission speed to ensure that private data is inaccessible to unauthorized devices on the internet to ensure that private data is inaccessible to unauthorized devices on the internet to establish a common standard for sending messages between devices on the internet to establish a common standard for sending messages between devices on the internet to validate the ownership of encryption keys used in internet communication
The best description of the purpose of TCP and IP protocols is to establish a common standard for sending messages between devices on the internet.
What is tcp?
TCP (Transmission Control Protocol) is a communications protocol used for sending data over networks. It is an end-to-end protocol that ensures reliable data transmission between two computers. It is designed to provide connection-oriented communication between two devices, with data being sent in a reliable and orderly fashion. To ensure reliability, TCP uses a checksum algorithm to detect data corruption, and provides flow control to prevent data packets from being lost. It also provides congestion control, which helps the network avoid packet loss due to network congestion. In addition, it allows applications to request data in small chunks, providing better overall performance when data must be sent over multiple connections. TCP is an important protocol used in many applications, including web browsing, file transfer, and email.
To learn more about tcp
https://brainly.com/question/14280351
#SPJ4