List at least 3 physical properties if water.

The type of pollutant in waterways which can be toxic at high levels is nitrates.

Pollutant is a substance that is introduced into the environment and has negative effects on living organisms and the environment. It can be either natural or man-made and can include air pollutants such as carbon dioxide, sulfur dioxide, nitrogen oxides, and particulate matter, as well as water pollutants such as nutrients, heavy metals, and toxic chemicals.

Nitrates are nitrogen-containing compounds and are often found in fertilizers, wastewater and agricultural runoff. Nitrates can lead to oxygen depletion in water and can be harmful to aquatic life and humans if consumed in high amounts. The River Avon in Warwickshire is known to have high levels of nitrates due to agricultural runoff.

To learn more about pollutant
https://brainly.com/question/1347424
#SPJ1

Metal reactivity increases down groups and declines across periods from left to right.

because metals' reactivity increases as they move along the group. Since they are farther from the nucleus and have greater shielding, which results in a lower nuclear attraction, the outer electrons are simpler to expel.

Ionization Energy, which measures how easily an element may expel its electrons, is one influencing factor. The element's electronegativity is another consideration since it affects how eagerly an element seeks out electrons from other elements.

As you move throughout a period from left to right, responsiveness declines. It is easier for electrons to be given or taken away the further to the left and down the periodic chart you travel, leading to higher reactivity.

To learn more about Metals :

https://brainly.com/question/9621716

#SPJ4

Answer:

16Ag +S8 --> 8Ag2S

Explanation:

You know that you are starting out with 8 sulfer's on the reactant side, so there must be an equal amount on the product side. So, to get 8 sulfer's on the product side we multiply the entire (Ag2S) by 8 to get 8Ag2S. Now on the reactant and product side we have an equal amount of sulfer. However, the product side has 16 silvers. To balance this out, on the reactant side we multiply the number of Ag by 16 to get 16 Ag ont he reactant and product sides. Now the reactant and product sides have the same number of each element :)

In a sample of hydrogen iodide, in addition to dispersion forces, dipole-dipole forces also exist.

Intermolecular forces, which act between atoms and various surrounding particles in the form of electromagnetic forces of attraction or repulsion, are one illustration. The three fundamental types of intermolecular interactions are dipole-dipole interactions, London dispersion forces, also known as van der Waals forces, and hydrogen bonds.

As there is a significant difference in electronegativity between the H and I in hydrogen iodide, dipole-dipole interactions will occur.

Iodine is not sufficiently electronegative and is too big for the molecule HI to establish hydrogen bonds, which prevents the formation of hydrogen bonds.

The electrons are dispersed symmetrically with respect to the nucleus due to the action of London dispersion forces between atoms and molecules that are typically symmetric. To the van der Waals forces they belong.

To know more about intermolecular forces from the link

brainly.com/question/2193457

#SPJ4

Answer:

2NaOH + CO2 -----> Na2CO3 + H2O

Explanation:

Carbon dioxide is acid anhydride, so reacts like and acid with Sodium hydroxide is neutralisation reaction to form salt and water

If 8. 4 L of hydrogen gas and 18. 1 g of silicon tetrachloride react (at STP), the mass of silicon that will precipitate out is 2.98 g.

The reaction between silicon tetrachloride (SiCl4) and hydrogen gas (H2) is as follows:

SiCl4 + 2H2 -> Si + 4HCl

The balanced equation can be used to calculate the stoichiometry of the reaction. The ratio of SiCl4 to Si is 1:1, and the ratio of H2 to HCl is 2:4.

From the information given, we know that 18.1 of SiCl4 reacts with 8.4 L of H2 at STP. To determine the number of moles of SiCl4, we can use the molar mass of SiCl4, which is 169.89 g/mol.

18.1 g / 169.89 g/mol = 0.106 mol

Since the stoichiometry ratio between SiCl4 and Si is 1:1, we can assume that 0.106 mol of SiCl4 will produce 0.106 mol of Si.

To find the mass of Si that will precipitate out we need to find the molar mass of Silicon, which is 28.0855 g/mol.

0.106 mol * 28.0855 g/mol = 2.98 g

So the mass of silicon that will precipitate out is 2.98 g.

Learn more about mass here:

https://brainly.com/question/17067547

#SPJ4

Answer:

7.52x10^24 molecules of H2O.

Explanation:

1)  We need to start with a balanced equation for this reaction, combustion of methane:

CH4 + 2O2 →CO2 + 2H2O

This tells us that 1 mole of methane will produce 2 moles of water.  (2 moles H2O)/(1 mole CH4)

2)  Find the moles of methane in 100g of the molecule.  The molar mass of methane is 16.0 g/mole.  

Moles CH4 = (100g/16.0 g/mole) = 6.25 moles CH4

3)  Multiply 6.25 moles CH4 by the molar ratio from (1):

   (6.25 moles CH4)( (2 moles H2O)/(1 mole CH4) = 12.50 moles H2O [the moles CH4 cancel]

4)  Multiply the moles H2O by Avogadro's number:  6.02x10^23 molecules/mole

   (12.50 moles H2O)*(6.02x10^23 molecules/mole) = 7.52x10^24 molecules of H2O.

630°C of temperature must be attained by the gases.

Gay-law Lussac's which was found in 1808 and published in 1809, is the term used to describe Joseph-Louis Gay-law Lussac's of combining volumes of gases. It can also describe the relationship between a gas's volume and absolute temperature under constant pressure. Simple whole numbers can be used to indicate the volume ratio of the reactant gases to the gaseous products.

This is an illustration of Gay-Law Lussac's since the volume is constant but the pressure and temperature are changing:

[tex]P1/T1=P2/T2[/tex]

The formula above may be rearranged to yield

T2=T1*P2/P1

Your data include:

P1=206. 843 kPa

T1=(27+273.15)K=300.15K

P2= 620. 528 kPa

T2=?

T 2 = 300.15 K* 620. 528 kPa/ 206. 843 kPa= 900.45K = 627.3 °C

Near to 627.3 °C the temerature is 630 °C

learn more about Gay-law Lussac's Refer:brainly.com/question/2683502

#SPJ4

Answer:

A silvery-white metal that ignites easily in air and burns with a bright light.

Oxygen: When exposed to oxygen, magnesium turns into magnesium oxide. Hydrogen: When exposed to hydrogen, magnesium turns into magnesium hydride. Nitrogen: When reacted with nitrogen, magnesium turns into magnesium nitride.

Explanation:

A gas consisting of 25. 6 moles of carbon fills a volume of 128 L and has a pressure of 135 kPa. The temperature of the gas is -270.58°C.

The temperature of a gas can be found using the Ideal Gas Law, which states that PV = nRT. The Ideal Gas Law relates the pressure, volume, and temperature of a gas to the number of moles of the gas present.

In this case, we are given the number of moles of the gas (n = 25.6 moles), the volume of the gas (V = 128 L), and the pressure of the gas (P = 135 kPa). We can use these values to find the temperature of the gas in degrees Celsius.

First, we need to convert the pressure from kPa to Pa. To do this, we multiply the pressure in kPa by 1000:

P = 135 kPa x 1000 Pa/kPa = 135 000 Pa

We can now substitute this value into the Ideal Gas Law:

PV = nRT

T = (nRT)/P

T = (25.6 mol * 8.314 J/mol.K) / (135 000 Pa)

T = 2.57 K

To convert from Kelvin to Celsius, we subtract 273.15 from the temperature in Kelvin:

T(°C) = T(K) - 273.15

T(°C) = 2.57 K - 273.15 = -270.58°C

So the temperature of the gas is -270.58°C

Please note that this is an ideal gas equation and it will not work for real gases. Also, the temperature is extremely low, it's unlikely that the gas can exist at that temperature.

To know more about gas please refer: https://brainly.com/question/13123721

#SPJ4

Answer:

When animals die, they decompose and when they decompose their remains become seditment thus trapping the stored carbon. This sediment sometimes forms fossil fuels like coal and oil which in turn release carbon back into the atmosphere when the fossil fuels are burned.

4.01 x 1012 grammes of beryllium contain 4.45 x 1011 moles of beryllium. The chemical element beryllium has the atomic number 4 and the letter Be assigned to it. Alkaline earth metal is brittle, steel-gray, strong, and light.

The formula: can be used to determine how many moles of a material there are.

Molar mass divided by mass equals a mole.

Beryllium has a molar mass of 9.012 g/mol.

Therefore, we can perform the following calculation to determine how many moles of beryllium there are in 4.01 x 1012 grammes of beryllium:

4.01 x 10-12 grammes are equal to 9.012 grammes per mole.

4.45 x 1011 moles are one mole.

Therefore, 4.01 x 1012 grammes of eryllium contain 4.45 x 1011 moles of eryllium.

Note that both numbers must have the same exponent when writing in scientific notation, and that you must use a calculator to perform the calculation if you don't want to receive the wrong answer.

learn more about Beryllium here:

https://brainly.com/question/30169850

#SPJ4

The entropy change of the given reactions can be determined from the entropies of each individual gases. The entropy change of the first reaction is - 389.74 J.

Entropy of a system is the measure of the total randomness of system. As the number of moles increases, the entropy increases.

The entropy change of a reaction is given as follows:

ΔSrxn = ∑s (products) -  ∑s (reactants)

For the given reactions, the entropy of each reactants and products are given and use their number of moles to calculate the reaction entropies as follows:

For reaction 1:

(2 ×192.5 J) - [(3×130.58) + (2× 191.5 J)]  = - 389.74 J/K

Reaction 2:

(2 ×188.83 J + 213.6 J) - 186.3 J + (2× 205 J)]  = - 5.04 J/K

Reaction 3:

(2 ×220 J) - 205 + (2× 191.5 J)]  = - 148 J/K

Therefore, the entropy change of the given reactions can be determined in this way. For all these reactions, the entropy is decreasing.

Find more on entropy change:

https://brainly.com/question/4526346

#SPJ1

From the stoichiometry of the reaction 0.18 g of 1-hexanol is formed.by hydroboration oxidation .

By hydroboration, which involves diborane in tetrahydrofuran followed by treatments with hydrogen peroxide and sodium hydroxide, 1-hexene may be changed into 1-hexanol: Hexan-1-ol An alkene can become an alcohol by a two-step hydration reaction called the hydroboration-oxidation reaction.

The theoretical yield of a compound is its yield based on the stoichiometry of the reaction.

We must now obtain the number of moles of each reactant:

For hexane;

Mass of hexane = Density × volume = 93 mL × 0.673 g/mL = 62.589 g

Number of moles = 0.55 g/84 g/mol = 0.0065 moles

For borane;

Number of moles = concentration × volume = 1.00 M ×  1. 79 mL/1000 L = 0.00179 moles

Since the reaction is 1:1, borane is the limiting reactant, hence;

Number of moles of 1-hexanol = 0.00179 moles × 102 g/mol = 0.18 g

In the procedure, the double bond is replaced by the simultaneous addition of a hydrogen and a hydroxyl group.

learn more about hydroboration Refer:brainly.com/question/2622427

#SPJ4

Carbon and silicon are especially relevant to us because they are key building blocks of many important materials and technologies in our daily lives.

Carbon is a versatile element that is found in many different forms, such as graphite, diamond, and carbon fiber, and is used in a wide range of applications. For example, it is used as a lubricant, a fuel, and a structural material in the production of steel. Carbon is also the basis of all life on earth and is an essential component of DNA, proteins, and cell membranes.

Silicon is a semiconductor material that is widely used in the electronics industry. It is the basis of most computer chips and is also used in solar cells, transistors, and other electronic devices. Silicon is also used in the production of glass, ceramics and other materials.

Furthermore, carbon and silicon are the basis of many organic compounds and materials, which are widely used in the chemical industry, from drugs to plastics. They are also widely used in the energy industry in batteries and fuel cells.

To know more about carbon and silicon click here:

https://brainly.com/question/1966406#

#SPJ4

According to the table the density of water is 1g/cm^3 and the density of saturated solution is 1.12g/cm^3.

The ratio of an object or substance's volume (the amount of space it occupies) to the amount of matter it contains is known as its density (its mass). Density Formula: ρ = m/V, where ρ is the density, m is the object's mass, and V is its volume.

Given the volume of water = 50ml

The mass of water = 50g

Then density of water = mass of water/volume of water = 50/50 = 1g/ml = 1g/cm^3

The mass of Saturated Salt Solution = 56g

The volume of Saturated Salt Solution = 50ml

The density of Saturated Salt Solution = 56/50 = 1.12g/ml = 1.12g/cm^3

To learn more about density click here https://brainly.com/question/29775886

#SPJ4

complete question: Calculate the densities of the liquids in Table 2.3. The accepted density of water is 1 g/cm3. How do your results compare? Remember that 1 cm3 = 1 mL

The G1, S, and G2 stages of interphase, the mitotic phases of mitosis and cytokinesis, and the G0 phase make up the cell cycle.

The cell cycle is a four-step process in which the cell grows in size (gap 1, or G1, stage), duplicates its DNA (synthesis, or S, stage), gets ready to divide (gap 2, or G2, stage), and divides (gap 3, or S, stage) (mitosis, or M, stage). The period between cell divisions is represented by the stages G1, S, and G2, which together make up interphase.

The process through which cells multiply and divide into two new cells is known as the cell cycle. G1, S, G2, and M are the several cell cycle stages. The cell is getting ready to divide in the G1 stage. The cell next enters the S phase, where it duplicates all the DNA, to accomplish this.

There are five of these phases: prophase, prometaphase, metaphase, anaphase, and telophase. As the final physical cell division after telophase, cytokinesis is frequently regarded as the sixth stage of mitosis.

To learn more about cell cycle refer to:

https://brainly.com/question/5034994

#SPJ1

To convert between a substance's count, mass, and volume, you must understand the following information: The substance's molar mass is expressed as the weight of one mole.

which is often expressed in grams per mole (g/mol). You may translate between the quantity of moles and the substance's mass by knowing the molar mass of a substance. The substance's density: The unit of measurement for density is grams per cubic centimeter (g/cm3), which represents the mass of a material per unit of volume. You can convert between a material's mass and volume by knowing the density of the substance. The compound's molar volume is: The volume of a molar is one.Typically, a chemical is measured in liters per mole (L/mol) units. You may convert between the quantity of moles and the substance's volume by knowing the molar volume of a substance.The number of atoms or molecules in one mole of a material is known as the Avogadro number.

learn more about mass  here:

https://brainly.com/question/19694949

#SPJ4

Find the number of moles in each reactant in the formula CO + 2 H2 CH3OH.

= 174371 g = 174.4 kg.

To Learn more About number of moles refer To:

https://brainly.com/question/14357742

#SPJ1

Kp is the equilibrium constant for a reaction in terms of partial pressures. And Kp = 32.6 (8.314 J/mol·K)^(-4) (359+273)K.

While Kc is the equilibrium constant for a reaction in terms of concentrations. To convert between Kp and Kc, the ideal gas law must be used. The ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

Given the reaction,

3A(g)+3B(g)⇌C(g)

We can convert Kc to Kp by using the following relationship:

Kp = Kc(RT)^(Δn)

where Δn is the change in the number of moles of gas between products and reactants.

In this case, Δn = 1 - (3+3) = -4,

Kp = 32.6 (8.314 J/mol·K)^(-4) (359+273)K

Kp value can be calculated by inserting the given values in above equation. It is important to note that the units of R and T must be consistent with the units used for Kc. In summary, to find Kp, we need to know Kc, the change in the number of moles of gas between products and reactants and the temperature in Kelvin.

To know more about reaction please refer: https://brainly.com/question/29039149

#SPJ4

A spontaneous process is a kind of process which occurs without any external input to the system. Earth moves around the sun and formation of solid sodium chloride from sodium metal and chlorine gas.

A spontaneous process is a process which is in one direction under a certain set of conditions and a nonspontaneous process is in the reverse direction. For instance, At room temperature and atmospheric pressure ice will melt spontaneously, but water will not freeze spontaneously.

Boiling always occur spontaneously at all the given temperatures.

To know more about boiling, visit here:

https://brainly.com/question/2153588

#SPJ4

If  He gas has an average kinetic energy of the 8150 J/mol under the certain conditions, the root mean square speed of O₂ gas molecules under the same conditions is  3.0 × 10²⁹ m/s.

The average kinetic energy  is expressed as :

K.E = 3 R T / 2

8150 = ( 3 × 8.314 × T ) / 2

16300 = 24.94 T

T = 653.5 K

The root mean square speed, Vrms = √(3kNaT ) /M

The root mean square speed, Vrms = √ ( 3 × 1.38 × 10⁻²³ × 6.023 × 10²³ ×

                                                                                   653.5 ) / 5.31 × 10⁻²⁶

The root mean square speed, Vrms = 3.0 × 10²⁹ m/s.

To learn more about  kinetic energy here

https://brainly.com/question/8435121

#SPJ4

The molarity of the solution prepared by mixing 25.0 mL of 0.375 M NaCl with 42.0 mL of a 0.632 M NaCl is 0.536 M

We'll begin by obtaining the mole of NaCl in both solutions. Details below:

For 0.375 M NaCl:

Molarity = number of mole / Volume

Cross multiply

Number of mole = molarity × volume

Number of mole of NaCl = 0.375 × 0.025

Number of mole of NaCl = 0.009375 mole

For 0.632 M NaCl:

Molarity = number of mole / Volume

Cross multiply

Number of mole = molarity × volume

Number of mole of NaCl = 0.632 × 0.042

Number of mole of NaCl = 0.026544 mole

Finally, we shall determine the molarity of the solution. Details below:

Molarity = mole / volume

Molarity = 0.035919 / 0.067

Molarity = 0.536 M

Thus, the molarity of the solution is 0.536 M

Learn more about molarity:

https://brainly.com/question/16073358

#SPJ1

Answer:

FeSO4 is the formula for iron(II) sulfate.

Answer: 1st. 71.875 g of ethanol could burn in 100 g of oxygen.

2nd. 71.875 g of ethanol could burn in 100 g of oxygen.

Explanation: The balanced equation for the combustion of ethanol (C2H5OH) with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O) is:

C2H5OH + 3O2 → 2CO2 + 3H2O

From the balanced equation, we can see that for every 1 mole of ethanol that burns, 3 moles of oxygen are required. The molar mass of ethanol is 46 g/mol and the molar mass of oxygen is 32 g/mol.

To find the mass of ethanol that could burn in 100 g of oxygen, we can use the following calculation:

mass of ethanol = (mass of oxygen / molar mass of oxygen) x (molar mass of ethanol / molar mass of oxygen)

mass of ethanol = (100 g / 32 g/mol) x (46 g/mol / 32 g/mol) = 71.875 g

Therefore, 71.875 g of ethanol could burn in 100 g of oxygen.

For the second question, the balanced equation for the reaction of magnesium (Mg) with sulfuric acid (H2SO4) to produce magnesium sulfate (MgSO4) and hydrogen (H2) is:

Mg + H2SO4 → MgSO4 + H2

From the balanced equation, we can see that for every 1 mole of magnesium that reacts, 1 mole of hydrogen is produced. The molar mass of magnesium is 24 g/mol and the molar mass of hydrogen is 2 g/mol.

To find the mass of hydrogen that is formed when 2.00 g of magnesium reacts with sulfuric acid, we can use the following calculation:

mass of hydrogen = (mass of magnesium / molar mass of magnesium) x (molar mass of hydrogen / molar mass of magnesium)

mass of hydrogen = (2.00 g / 24 g/mol) x (2 g/mol / 24 g/mol) = 0.08333 g

Therefore, 0.08333 g of hydrogen is formed when 2.00 g of magnesium reacts with sulfuric acid.

An empty graduated cylinder is weighs 55.5 g. when filled with the 71.5 ml of  unknown liquid, it weighs 135.0 g. The density of the unknown liquid in g/ml is 29.5 g/L.

The given data :

The mass of empty graduated cylinder = 55.5 g

The volume of the unknown liquid = 50 mL

The mass after the liquid is filled = 135 g

The mass of the liquid = total mass - mass of cylinder

                                      = 135 - 55.5

                                       = 79.5 g

The density is given as :

Density = mass / volume

             = 79.5 / 50

             = 29.5 g/ml

Thus, the density is 29.5 g/L.

To learn more about graduated cylinder here

https://brainly.com/question/2916871

#SPJ4

Your friend is studying a specific exergonic reaction. Your friend hypothesizes that the addition of enzyme X will reduce the delta-G of this reaction, thus allowing it to proceed spontaneously.

Enzymes do not change delta-G, so this hypothesis does not fit with what is known about this reaction.

According to the second law of thermodynamics any reaction that occurs at constant temperature without input of electrical energy or photons is exergonic. An example is cellular respiration. An exergonic reaction is a chemical reaction in which the change in free energy is negative (there is a net loss of free energy). It shows a spontaneous reaction if the system is closed and the initial and final temperatures are the same. For processes that take place in a closed system at constant pressure and temperature, the Gibbs free energy is used, while the Helmholtz energy is relevant for processes that take place at constant temperature and volume.

Learn more about exergonic reaction at https://brainly.com/question/11064909.

#SPJ4

Your friend is studying a specific exergonic reaction. your friend hypothesizes that the addition of enzyme x will reduce the delta-g of this reaction, thus allowing it to proceed spontaneously. The hypothesis does not fit with what is known about this reaction because Enzymes do not change delta-G.

1) An exergonic reaction is a reaction that produces free energy. Because it releases energy rather than consuming it, this kind of reaction can occur naturally, unhindered by outside factors.

2) Chemical processes known as exergonic reactions have a negative change in free energy. The free energy of a system is used to calculate its overall quantity of available energy; negative changes signify energy release, whilst positive changes signify energy storage.

Only the activation energy is altered by enzyme.

This concept does not make sense given what is known about the reaction because enzymes do not alter delta G.

To learn more about Exergonic reaction refer

brainly.com/question/11064909

#SPJ4

This is an example of a phase transition, which is a change in the physical state of a substance, such as a solid, liquid, or gas, due to changes in temperature and/or pressure.

In this case, the phase transition is from graphite, a form of carbon in a solid state, to diamond, another form of carbon in a solid state, under high temperatures and pressures.

Graphite and diamond are both forms of carbon, but they have different crystal structures, which gives them distinct properties. Graphite is a soft, slippery solid that is used as a lubricant and in pencils because of its ability to leave a dark mark on the paper. Diamond, on the other hand, is the hardest natural substance known and is used in cutting tools and jewelry.

The change from graphite to diamond is a phase transition, which occurs when the temperature and pressure of a substance are increased beyond certain limits. The exact conditions required to transform graphite into diamond vary depending on the specific method used but typically involve temperatures of around 900-1300 degrees Celsius and pressures of around 50,000 atmospheres. This process is called as high-pressure high temperature (HPHT) method. The process of graphite to diamond is known as metamorphism.

Learn more about graphite here:

https://brainly.com/question/27860158

#SPJ4

Answer:

chromosome

Explanation:

Answer: Chromosome

Explanation: A chromosome is made up of a single, massively long DNA molecule containing a linear array of many genes.

you decide to test your pillbugs' preference for an acidic environment versus a nonacidic environment. on one side of the chamber you place filter paper moistened with water. Dry filter paper is appropriate to place on the other side to test this variable.

Armadillidiidae (Pillbugs) is a family of woodlice, a terrestrial crustacean group in the order Isopoda. Unlike members of some other woodlice families, members of this family can roll into a ball, an ability they share with the outwardly similar but unrelated pill millipedes and other animals. This ability gives woodlice in this family their common names of pill bugs or roly polies.Other common names include slaters, potato bugs, and doodle bugs. Most species are native to the Mediterranean Basin, while a few species have wider European distributions. The best-known species, Armadillidium vulgare, was introduced to New England in the early 19th century and has become widespread throughout North America.

Learn more about pillbugs at

https://brainly.com/question/26410019.

#SPJ4