Katherine Johnson worked at NASA in the 1950s as a mathematician with the job title of computer. She provided calculations for engineers on the Mercury and Apollo space missions. Her work: take a problem, such as finding the trajectory for a space capsule’s flight path, do the math in steps and record each one, find the solution, and pass the calculations to the engineers to evaluate and use. How does Ms. Johnson’s work compare to computing today?

A. It likely was more accurate due to risks of malware.

B. It is close to today’s systems but lacked the input step.

C. It likely was less accurate than computer results.

D. It followed the same process as today’s computing.

Answers

Answer 1

Answer:

C. It likely was less accurate than computer results.

Explanation:

While Katherine Johnson's calculations were extremely precise, they were done by hand using paper and pencil, without the aid of modern computers. This means that they were more prone to human error than modern computer results, which are calculated using digital algorithms and software designed specifically for accuracy and reliability. Additionally, modern computing is much faster and can handle larger and more complex calculations than Johnson's manual methods.


Related Questions

Chapter 2, problem 17: (1 pts) show that the nor is functionally complete by implementing a not, a two-input and, and a two-input or using only two-input nors

Answers

We must demonstrate that we can implement any Boolean function using only NOR gates in order to prove that the NOR gate is functionally complete. EITHER A Equals A OR A

How can a Boolean function be implemented using NOR gates?

So, to implement the Boolean functions, we employ NOR gates. It's crucial to keep in mind that the NOR gate is the opposite of the basic OR gate. This indicates that the complement of the OR gate's output is equal to the output of the NOR gate.

Is the NOR operation fully operational?

NAND and NOR are two singleton sets that are equally functional. Unfortunately, because it is unable to represent NOT, the set of AND, OR is lacking.

To know more about function visit:-

https://brainly.com/question/28939774

#SPJ1

Determine the dimension of a cylindrical riser to be used for the casting as aluminium cube of sides 15cm. The volume shrinkage of aluminium during the solidification is 6.5%.Hint: Volume of the riser = 3% (Shrinkage volume of the casting)

Answers

The correct answer is To determine the dimension of a cylindrical riser for the casting of an aluminum cube of sides 15 cm, we need to consider the shrinkage that occurs during solidification.

The volume of the cylindrical riser should be equal to the volume of the aluminum cube plus the shrinkage volume. Since the shrinkage volume is given to be 6.5% of the volume of the aluminum cube, we can calculate it as follows:Shrinkage volume = [tex]6.5/100 * (15)^3[/tex][tex]= 172.6875 cm^3[/tex]To find the volume of the cylindrical riser, we can use the formula:  Volume of a cylinder = [tex]πr^2h[/tex]  Let's assume the height of the riser to be h and the radius to be r. We know that the volume of the riser should be 3% of the shrinkage volume plus the volume of the aluminum cube:

Volume of riser[tex]= 3/100 * 172.6875 + 15^3[/tex][tex]= 221.78 cm^3[/tex] Substituting this value into the formula for the volume of a cylinder, we get: [tex]πr^2h = 221.78[/tex]  Since we don't have any information about the height of the riser, we can assume it to be h. Solving for r, we get: [tex]r = sqrt(221.78/(πh))[/tex] Therefore, the dimension of the cylindrical riser would depend on the height of the riser, which is not given in the problem statement. We would need to know the height to calculate the radius of the cylindrical riser.

To learn more about cylindrical riser click on the link below:

brainly.com/question/16344141

#SPJ1

Technician A says that individuals using hazardous materials for personal use are exempt from the final rule.
Technician B says that hobbyists using hazardous materials are exempt from the final rule as long as they do not spray more than
two vehicles per year.
Who is right?
A)
B)
C)
D)
B only
Both A and B
A only
Neither Anor B

Answers

Prepare a strategy for handling a hazardous material occurrence. Damage to hazardous material containers should be noted. Identify any dangerous substances. Determine the size of a threatened region.

A hazardous materials technician is what?

When there is an emergency involving potentially harmful substances, a Hazmat Technician responds. You determine how to properly dispose of the hazardous materials as a Hazmat Technician by identifying them. Asbestos, lead, mercury, mould, radioactive waste, and nuclear waste are a few examples of materials you might frequently deal.

What do technicians in materials do?

In order to support business operations and provide high-quality outputs, a materials technician is in charge of examining, testing, and guaranteeing the stability and efficiency of the tools and materials needed for production operations and manufacturing processes.

To know more about hazardous material visit:-

https://brainly.com/question/29630735

#SPJ1

A hook bill knife is best used for which of the following?

Cutting wires

Shaping wires

Cutting the sheathing of non-metallic sheathed cable

Cutting holes for wires

Answers

Answer:

I think it's Cutting the sheathing of non-metallic sheathed cable.

Using the grammar in Example 3.4 [p.120]*, show a sentential form leftmost derivation for each of the four following statements. Write your derivations in the answer space below: Note: These are the same four statements as the previous questions. a. A = (A+B) *C b. A=B+C+A c. A = A * (B+C) d. A = B*C*(A + B)) * Sebesta, 11th ed. For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac).

Answers

A leftmost derivation is a type of derivation in which the leftmost nonterminal in each sentential form is the one that is expanded first. Here are the leftmost derivations for the four given statements:

a. A = (A+B) *C

S → A=E
→ A=(E)*E
→ A=(A+E)*E
→ A=(A+B)*E
→ A=(A+B)*C

b. A=B+C+A

S → A=E
→ A=E+E
→ A=E+E+A
→ A=B+E+A
→ A=B+C+A

c. A = A * (B+C)

S → A=E
→ A=E*(E)
→ A=A*(E)
→ A=A*(B+E)
→ A=A*(B+C)

d. A = B*C*(A + B)

S → A=E
→ A=E*E
→ A=E*E*(E)
→ A=E*E*(A+E)
→ A=E*E*(A+B)
→ A=B*E*(A+B)
→ A=B*C*(A+B)

In each of these derivations, the leftmost nonterminal is the one that is expanded first. This is indicated by the arrow pointing to the next sentential form.

Learn more about derivations:

https://brainly.com/question/23819325

#SPJ11

What are 4 different telescopes that are used to see radio waves?

Answers

Answer:

A radio telescope can be divided into 4 functional parts. The four parts are: the reflector dish, the antenna, the amplifier and the receiver/recorder.  The large dish that most people associate with a radio telescope is used to focus the radio waves.

Explanation:

If a project required a nonbearing exterior wall to minimize solar heat gain while transmitting some light, which of the following materials would be appropriate?
A. Glass block
B. Face brick
C. Modular brick
D. Grade MW brick

Answers

The appropriate material for a nonbearing exterior wall that minimizes solar heat gain while transmitting some light would be A. Glass block.

Glass block, also known as glass bricks, is a type of material that is commonly used in construction for nonbearing exterior walls. It is an excellent material for minimizing solar heat gain while still allowing some light to pass through. Glass block is also a good choice for nonbearing exterior walls because it is strong and durable, and can withstand the elements without deteriorating.

In contrast, face brick, modular brick, and grade MW brick are not as effective at minimizing solar heat gain or transmitting light. These types of materials are typically used for structural or decorative purposes, and are not designed to minimize solar heat gain or transmit light.

Therefore, the correct answer to this question is A. Glass block.

You can learn more about solar heat at

https://brainly.com/question/12667197

#SPJ11

Python bst codes
In a list

Answers

Answer:

Explanation:

Here is an example of a binary search tree (BST) implementation in Python using a list:

class BST:

   def __init__(self, data):

       self.root = [data, [], []]

   def insert_left(self, data):

       if self.root[1] == []:

           self.root[1] = [data, [], []]

       else:

           t = BST(data)

           t.root[1] = self.root[1]

           self.root[1] = t.root

   def insert_right(self, data):

       if self.root[2] == []:

           self.root[2] = [data, [], []]

       else:

           t = BST(data)

           t.root[2] = self.root[2]

           self.root[2] = t.root

   def get_left_child(self):

       return self.root[1]

   def get_right_child(self):

       return self.root[2]

   def set_root_val(self, data):

       self.root[0] = data

   def get_root_val(self):

       return self.root[0]

This implementation uses a list to represent the nodes of the tree. Each node contains the data value, and the indices of the left and right child nodes (which are also lists).

To create a BST object, we can use the following code:

python

Copy code

my_bst = BST(5)

my_bst.insert_left(3)

my_bst.insert_right(8)

This creates a BST with a root node of 5, a left child node of 3, and a right child node of 8.

We can access and modify the values of the nodes using the methods get_root_val, set_root_val, get_left_child, and get_right_child. For example:

print(my_bst.get_root_val())  # output: 5

my_bst.set_root_val(7)

print(my_bst.get_root_val())  # output: 7

print(my_bst.get_left_child().get_root_val())  # output: 3

This code sets the root value to 7, and then prints the root value and the value of the left child node. The output should be:

7

3

Prompt the user for a string that contains two strings separated by a comma. (1 pt)Examples of strings that can be accepted:Jill, AllenJill , AllenJill,AllenEx:Enter input string: Jill, Allen

Answers

To prompt the user for a string that contains two strings separated by a comma, you can use the `input()` function in Python. The `input()` function allows you to prompt the user for input and store it in a variable. Here is an example of how you can do this:

```python
# Prompt the user for a string
input_string = input("Enter input string: ")

# Split the string into two strings separated by a comma
string_list = input_string.split(",")

# Print the two strings
print("String 1:", string_list[0])
print("String 2:", string_list[1])
```

This will prompt the user for a string, split it into two strings separated by a comma, and print the two strings. Here is an example of the output:

```
Enter input string: Jill, Allen
String 1: Jill
String 2: Allen
```

Note that the `split()` function will split the string at the comma and return a list of the two strings. You can then access the two strings using the list indices `[0]` and `[1]`.

Learn more about function Python:

https://brainly.com/question/29334036

#SPJ11

Count input length without spaces, periods, or commas Given a line of text as input, output the number of characters excluding spaces, periods, or commas. Ex: If the input is: Listen, Mr. Jones, calm down. the output is: 21 Note: Account for all characters that aren't spaces, periods, or commas (Ex","2",) UAB ACTIVITY 5.14.1: LAB: Count input length without spaces, periods, or commas 0/10 main.py Load default template

Answers

To count the input length without spaces, periods, or commas, you can use the `replace()` method in Python to remove these characters from the input string before calculating its length. Here's how you can do it:

```python
# Get the input string
input_string = input()

# Remove spaces, periods, and commas from the input string
input_string = input_string.replace(" ", "")
input_string = input_string.replace(".", "")
input_string = input_string.replace(",", "")

# Calculate the length of the input string without spaces, periods, or commas
input_length = len(input_string)

# Print the result
print(input_length)
```

This will give you the number of characters in the input string excluding spaces, periods, or commas. For example, if the input is "Listen, Mr. Jones, calm down.", the output will be 21.

Learn more about programming:

https://brainly.com/question/26134656

#SPJ11

Can you help me answer these questions?

Answers

The viscosity of the fluid at each temperature:

At 40°C, = 57 sAt 60°C, = 41 sAt 80°C, = 29 s,At 100°C, = 16 s

a. Two options for new viscometers:

Rotational viscometer: This type of viscometer measures the viscosity of a fluid by rotating a spindle or bob inside the fluid. The resistance encountered by the spindle as it rotates is proportional to the viscosity of the fluid. The rotational viscometer is highly accurate and can be used to measure the viscosity of a wide range of fluids, including liquids, gels, and pastes. However, it can be quite expensive and may require regular maintenance.

Falling ball viscometer: This type of viscometer measures the viscosity of a fluid by timing how long it takes for a ball to fall through the fluid. The faster the ball falls, the lower the viscosity of the fluid. Falling ball viscometers are relatively inexpensive and easy to use. However, they are only suitable for measuring the viscosity of low-viscosity fluids, and they may not provide highly accurate results.

b. To calculate the viscosity of the fluid using a U-Tube viscometer, we can use the following equation:

= /(2)

where is the viscosity of the fluid in Pa·s, is the volume of the fluid in m³, is the radius of the U-tube in m, is the time taken for the fluid to flow through the U-tube in s,   is the length of the U-tube in m.

Using the data provided, we can calculate the viscosity of the fluid at each temperature:

At 40°C, = 57 s, so:

= /(2) = (57)/(2)

At 60°C, = 41 s, so:

= /(2) = (41)/(2)

At 80°C, = 29 s, so:

= /(2) = (29)/(2)

At 100°C, = 16 s, so:

= /(2) = (16)/(2)

Read more about fluid mechanics here:

https://brainly.com/question/25209686

#SPJ1

Which of the following traversals would print all of the elements in the 2D array of integers nums in row-major order?a) for(int col = 0; col < nums.length; col++) { for(int row = 0; row < nums[col].length; row++) { System.out.println(nums[col][row]); } }b) for(int row = 0; row < nums.length; row++) { for(int col = 0; col < nums[0].length; col++) { System.out.println(nums[col][row]); } }c) for(int row = 0; row < nums[0].length; row++) { for(int col = 0; col < nums.length; col++) { System.out.println(nums[row][col]); } }d) for(int row = 0; col < nums[0].length; col++) { for(int row = 0; col < nums.length; row++) { System.out.println(nums[row][col]); } }

Answers

Traversals given in option B would print all of the elements in the 2D array of integers nums in row-major order .So, the correct answer is option B: for(int row = 0; row < nums.length; row++) { for(int col = 0; col < nums[0].length; col++) { System.out.println(nums[row][col]); } }.

This traversal would print all of the elements in the 2D array of integers nums in row-major order because it first iterates through the rows of the array, and then through the columns within each row. This is the definition of row-major order, where the elements are accessed row by row, from left to right and top to bottom.

Option A would print the elements in column-major order, option C would not access all of the elements in the array, and option D contains syntax errors that would prevent the code from running.

You can learn more about 2D array at

https://brainly.com/question/14530506

#SPJ11

Explain the difference between dimensioning standards for inches and the standards for millimeters

Answers

Dimensioning standards for inches and millimeters are used to specify the size and location of features on an object or part. The primary difference between these two standards is the unit of measurement used.

Inches are the primary unit of measurement in the United States, and dimensioning standards for inches are based on the imperial system of measurement. This system is based on units of inches, feet, and yards.

Dimensioning standards for inches typically use fractions of an inch, such as 1/8", 1/16", or 1/32", to specify dimensions. These fractions are commonly used because they are easy to measure with common tools like rulers and calipers.

On the other hand, millimeters are the primary unit of measurement in most other parts of the world, and dimensioning standards for millimeters are based on the metric system of measurement. This system is based on units of millimeters, centimeters, and meters.

Dimensioning standards for millimeters typically use decimals, such as 1.5 mm or 3.75 mm, to specify dimensions. Decimals are commonly used in the metric system because they allow for more precise measurements and are easier to work with in mathematical calculations.

For more such questions on measurement, click on:

https://brainly.com/question/30238003

#SPJ11

Which of the following is the primary function of a circuit tester?

To test a receptacle device

To test a toggle switch

To test a circuit breaker

To test amperage

Answers

The primary function of a circuit tester is to test a receptacle device.

What is circuit tester?

A circuit tester is a tool used to determine if an electrical outlet (receptacle) is properly wired and functioning correctly. It is designed to detect the presence of electrical current and can determine if a receptacle is wired correctly or if there is a fault in the wiring.

To use a circuit tester, you simply plug it into the receptacle and observe the indicator lights or readouts. If the tester indicates that the receptacle is properly wired, it will typically display a series of lights or a message that confirms that the receptacle is working correctly. If there is a fault in the wiring, the tester will indicate this with a different set of lights or a message that alerts the user to the problem.

Therefore, While a circuit tester can be used to test other electrical devices, such as toggle switches, circuit breakers, and amperage, its primary function is to test electrical receptacles.

Learn more about circuit tester from

https://brainly.com/question/30064584

#SPJ1

An input gear has 55 teeth and the output gear has 25 teeth. What is the gear ratio of these gears? Which gear turns faster and how much faster is it compared to the other gear?

Answers

An input gear has 55 teeth and the output gear has 25 teeth. The gear ratio of these gears is 2.2:1.

By dividing the number of teeth on the driven gear (output gear) by the number of teeth on the driving gear, the gear ratio can be calculated (input gear). The driven gear in this instance has 25 teeth, while the driving gear has 55 teeth, resulting in the following gear ratio:

For calculating gear ratio, divide by the number of teeth on the driving gear.

25/55 is the gear ratio.

45% or a gear ratio of 0.45

In a gear reduction system, the output gear rotates more quickly than the input gear. The gear ratio determines the speed differential between the gears. In this instance, the output gear has a gear ratio of 0.45, which indicates that it rotates 1/0.45 times faster than the input gear. output gear with 25 teeth turns faster, and it is 2.2 times faster than the input gear with 55 teeth.

To learn more about Ratio :

https://brainly.com/question/28391198

#SPJ4

The gear ratio of these gears is 2.2:1 . The output gear turns faster than the input gear, and it turns 54.55% faster than the input gear.

To solve this problem, we need to know the gear ratio and which gear turns faster.

We can start by finding the gear ratio.

An input gear has 55 teeth and the output gear has 25 teeth.

What is the gear ratio of these gears?

The gear ratio is the ratio of the number of teeth on the input gear to the number of teeth on the output gear. Therefore, the gear ratio is:

Gear Ratio = Number of Teeth on Input Gear/Number of Teeth on Output Gear

Gear Ratio = 55/25

Gear Ratio = 2.2:1

This means that the input gear rotates 2.2 times for each rotation of the output gear.

Which gear turns faster and how much faster is it compared to the other gear?

The gear that turns faster is the output gear, which has fewer teeth.

To determine how much faster it turns, we can use the gear ratio.

The gear ratio tells us that the input gear turns 2.2 times for each rotation of the output gear.

Therefore, the output gear turns 2.2 times faster than the input gear.

To calculate how much faster the output gear is turning, we can use the following formula:

Speed Ratio = Output Gear Teeth/Input Gear Teeth

Speed Ratio = 25/55

Speed Ratio = 0.4545

This tells us that the output gear turns at 45.45% of the speed of the input gear, or 54.55% faster than the input gear.

For similar question on gear ratio

https://brainly.com/question/860313

#SPJ11

What are the partial products of 2. 3 x 2. 6

Answers

To find the partial products of 2.3 x 2.6, we can break down the multiplication into simpler steps by multiplying each digit of one factor by each digit of the other factor.

This can be done using the distributive property of multiplication, as follows: 2.3 x 2.6 = (2 x 2) + (2 x 0.6) + (3 x 2) + (3 x 0.6)  Simplifying each term, we get: 2.3 x 2.6 = 4 + 1.2 + 6 + 1.8  Therefore, the partial products of 2.3 x 2.6 are:  2 x 2 = 4  2 x 0.6 = 1.2   3 x 2 = 6   3 x 0.6 = 1.8   These partial products can then be added together to get the final product, which is 5.98.

To learn more about partial click on the link below:

brainly.com/question/19731075

#SPJ4

What are the advantaged and disadvantages of a fire tower

Answers

Fire towers, also known as lookout towers, are structures built on high points in forests or other landscapes to provide a vantage point for detecting and reporting fires. Here are some of the advantages and disadvantages of using fire towers:

Advantages and Disadvantages of Firetowers

Advantages:

Improved detection: Fire towers can provide a wider view of the landscape, allowing for the detection of fires more quickly than other methods.Cost-effective: Compared to other fire detection methods, fire towers are relatively inexpensive to build and maintain.Jobs: Fire towers provide employment opportunities for people who may not have other job options in remote areas.Historical value: Many fire towers have historical significance and are considered landmarks.

Disadvantages:

Limited range: Fire towers are limited in their range and cannot detect fires that are too far away or obstructed by terrain.Maintenance: Fire towers require regular maintenance to remain in good condition, which can be costly and time-consuming.Weather dependency: Fire towers may not be able to operate in adverse weather conditions such as fog, heavy rain, or high winds.Outdated technology: With the development of more advanced fire detection technology, fire towers may become obsolete.

Learn more about  Fire Tower at:

https://brainly.com/question/29249780

#SPJ1

compare and contrast workshop technology and workshop practice​

Answers

Answer:

1.1 Introduction

Workshop practice is a very vast one and it is very difficult for anyone to claim a mastery over it. It provides the basic working knowledge of the production and properties of different materials used in the industry. It also explains the use of different tools, equipments, machinery and techniques of manufacturing, which ultimately facilitate shaping of these materials into various usable forms. In general, various mechanical workshops know by long training how to use workshop tools, machine tools and equipment. Trained and competent persons should be admitted to this type of mechanical works and permitted to operate equipment.

In (Figure 1), F = 750 N. Determine the tension developed in cables AB, AC, and AD.

Answers

The tension forces in each cable can be determined by subtracting the tension in the other cables from the total force F.

What is tension forces?

Tension forces are a type of force that acts along the length of an object. These forces are created by the stretching of an object and are usually measured in Newtons. Tension forces can be found in a variety of different objects such as ropes, strings, wires, and cables. It can also be found in other objects such as springs and muscles. Tension forces can have a variety of effects on an object depending on the direction and magnitude of the force.

The forces acting on the body in the x-direction can be written as:

Fx = TAB - TAC - TAD = 0

Where TAB, TAC, and TAD are the tension forces in cables AB, AC, and AD respectively.

Therefore, we can solve for the tension forces in each cable:

TAB = TAC + TAD = F = 750 N

TAC = TAB - TAD = 750 N - TAD

TAD = TAB - TAC = 750 N - TAC

Therefore, the tension forces in each cable can be determined by subtracting the tension in the other cables from the total force F.

To learn more about tension forces

https://brainly.com/question/30089732

#SPJ1

In two dimensions, we can specify a line by the equation y=mx+h. Find an affine transformation to reflect two-dimensional points about this line. Extend your result to reflection about a plane in three dimensions

Answers

In two dimensions, the equation for a line can be written as y = mx + h. To reflect a point about this line, we can use an affine transformation matrix. The matrix for reflection about a line is given by:
[tex]$$ \begin{bmatrix} 1-2m^2 & 2mh & 2mh^2 \\ 2mh & 1-2h^2 & -2h(1+m^2) \\ 0 & 0 & 1 \end{bmatrix} $$[/tex]

To reflect a point (x, y) about the line, we simply multiply the point by this matrix:
[tex]$$ \begin{bmatrix} 1-2m^2 & 2mh & 2mh^2 \\ 2mh & 1-2h^2 & -2h(1+m^2) \\ 0 & 0 & 1 \end{bmatrix} \begin{bmatrix} x \\ y \\ 1 \end{bmatrix} = \begin{bmatrix} (1-2m^2)x + 2mhy + 2mh^2 \\ 2mhx + (1-2h^2)y - 2h(1+m^2) \\ 1 \end{bmatrix} $$[/tex]This gives us the reflected point (x', y').

To extend this result to reflection about a plane in three dimensions, we can use a similar matrix. The equation for a plane in three dimensions is given by Ax + By + Cz + D = 0. The matrix for reflection about this plane is given by:
[tex]$$ \begin{bmatrix} 1-2A^2 & -2AB & -2AC & -2AD \\ -2AB & 1-2B^2 & -2BC & -2BD \\ -2AC & -2BC & 1-2C^2 & -2CD \\ 0 & 0 & 0 & 1 \end{bmatrix} $$[/tex]

To reflect a point (x, y, z) about the plane, we simply multiply the point by this matrix:
[tex]$$ \begin{bmatrix} 1-2A^2 & -2AB & -2AC & -2AD \\ -2AB & 1-2B^2 & -2BC & -2BD \\ -2AC & -2BC & 1-2C^2 & -2CD \\ 0 & 0 & 0 & 1 \end{bmatrix} \begin{bmatrix} x \\ y \\ z \\ 1 \end{bmatrix} = \begin{bmatrix} (1-2A^2)x - 2ABy - 2ACz - 2AD \\ -2ABx + (1-2B^2)y - 2BCz - 2BD \\ -2ACx - 2BCy + (1-2C^2)z - 2CD \\ 1 \end{bmatrix} $$[/tex]
This gives us the reflected point (x', y', z').

To learn more about Matrix ;

https://brainly.com/question/23834102

#SPJ4

As a network engineer, you have been tasked to form a Gigabit Ethernet for connecting a data center with a data closet in an office building. Identify which of the following fiber Ethernet standards would you apply in this situation.a. 1000BASE-FXb.10GBASE-SRc.10GBASE-LRd. 1000BASE-LX

Answers

As a network engineer, the fiber Ethernet standard that you would apply in this situation is 1000BASE-LX. Therefore, the correct answer is d. "1000BASE-LX".

This standard is specifically designed for Gigabit Ethernet connections and is suitable for connecting a data center with a data closet in an office building. 1000BASE-LX uses a long-wavelength laser (1,270–1,355 nm) and can support distances of up to 5 km over single-mode fiber and 550 m over multimode fiber.

Therefore, the correct answer is: d. 1000BASE-LX

You can learn more about Ethernet standard at

https://brainly.com/question/28443277

#SPJ11

technician a says throttle body cleaner may be used to clean the iac motor internal components. technician b says on some vehicles, iac motor damage can occur if the pintle is cleaned with throttle body cleaner. who is correct?

Answers

Technician A and Technician B are both correct. Throttle body cleaner can be used to clean the internal components of the IAC motor, however, on some vehicles the pintle of the IAC motor can be damaged by the throttle body cleaner. Therefore, it is important to check the manufacturer's instructions to determine if it is safe to use throttle body cleaner on the IAC motor.

According to the given situation, Technician A says that throttle body cleaner may be used to clean the IAC (Idle Air Control) motor internal components. Technician B says that on some vehicles, IAC motor damage can occur if the pintle is cleaned with throttle body cleaner.

So, who is correct?

Technician B is correct. On some vehicles, IAC motor damage can occur if the pintle is cleaned with throttle body cleaner. Therefore, it is advised to check the manufacturer's recommended service procedures before using any cleaning product. A technician must not use cleaning solvents that are not specifically recommended by the manufacturer.To make sure that the IAC motor is not damaged during cleaning, the technician must carefully remove the IAC motor from the throttle body. The IAC motor should then be cleaned with an appropriate cleaner, such as electrical contact cleaner or IAC cleaner. Additionally, the technician should use a soft-bristled brush to clean the IAC motor pintle, being careful not to apply too much force during cleaning.

The IAC motor should then be reinstalled onto the throttle body with a new gasket or O-ring, as specified by the manufacturer.

Technician a says throttle body cleaner : https://brainly.com/question/31193380

#SPJ11

Given the following methods:initialize(int x, int y, int z); // starts the robot at the desired location (x,y) and direction zwhere 0 = up, 1 = right, 2 = down, 3 = left.moveForward(int x); // moves a robot forward x spaces turnLeft(); //turns a robot left turnRight(); //turns a robot rightHow many method calls would it take to draw each individual number in the seven segment form? Try to minimize the number of calls you use.1234567890

Answers

The total number of method calls to draw all of the numbers in the seven segment form would be 56 method calls.

To draw each individual number in the seven segment form, it would take a different number of method calls depending on the number being drawn.

Here is the breakdown for each number:

1: 2 method calls (initialize and moveForward)2: 6 method calls (initialize, moveForward, turnRight, moveForward, turnRight, moveForward)

3: 5 method calls (initialize, moveForward, turnRight, moveForward, turnRight)

4: 5 method calls (initialize, moveForward, turnLeft, moveForward, turnLeft)

5: 6 method calls (initialize, moveForward, turnLeft, moveForward, turnLeft, moveForward)

6: 7 method calls (initialize, moveForward, turnLeft, moveForward, turnLeft, moveForward, turnLeft)

7: 4 method calls (initialize, moveForward, turnRight, moveForward)

8: 8 method calls (initialize, moveForward, turnRight, moveForward, turnRight, moveForward, turnRight, moveForward)

9: 6 method calls (initialize, moveForward, turnRight, moveForward, turnRight, moveForward)

0: 7 method calls (initialize, moveForward, turnRight, moveForward, turnRight, moveForward, turnRight)

So, the total number of method calls to draw all of the numbers in the seven segment form would be 2 + 6 + 5 + 5 + 6 + 7 + 4 + 8 + 6 + 7 = 56 method calls.

Learn more about method calls:

https://brainly.com/question/24167967

#SPJ11

Define a function PrintVal() that takes two integer parameters and outputs the product of all positive integers starting with the first and ending with the second parameter. If no positive integers exist, product is 1. End with a newline. The function does not return any value. Ex: If the input is -2 5, then the output is: 120 Note: Positive numbers are greater than 0. What do I have wrong? Help look at my code below.#include using namespace std;void PrintVal(int numberA, int numberB) {int product;int i = 0;for(int i = numberA; i < numberB; i++) {if(numberA > 0) {product = product * i;cout <>numberA;cin>>numberB;PrintVal(numberA, numberB);return 0;}

Answers

There are a few issues with the provided code:

Firstly, the variable product is not initialized to 1 before being used in the loop, so it will have an undefined value. Secondly, the loop condition should be i <= numberB to include the upper bound in the calculation. Finally, the function should not return a value since it is declared as void.

Here's the corrected code:

#include <iostream>

using namespace std;

void PrintVal(int numberA, int numberB) {

   int product = 1;

   for(int i = numberA; i <= numberB; i++) {

       if(i > 0) {

           product = product * i;

       }

   }

   cout << product << endl;

}

int main() {

   int numberA, numberB;

   cin >> numberA >> numberB;

   PrintVal(numberA, numberB);

   return 0;

}

This should correctly output the product of all positive integers between numberA and numberB.

Learn more about programming:

https://brainly.com/question/26134656

#SPJ11

Trapezoidal rule T_{2} gives integrate f(x) dx from 0 to 1 = 2 and also using Trapezoidal rule T_{4} gives integrate f(x) dx from 0 to 1 = 1.75 If f(0.25) = f(0.75) = a then what is the value of a?

Answers

The area under the curve is approximated by trapezoids in the Trapezoidal rule, which estimates the definite integral of a function. The number of used trapezoids is indicated by the subscript in the notations T 2 and T 4.

What other names exist for the trapezoidal formula?

The trapezoidal rule, also known as the trapezoid rule or trapezium rule, is a method for approximating the definite integral in mathematics, more specifically in numerical analysis.

Trapezoidal rule T 2 gives us the following: T 2 = (b - a) [f(a) + f(b)] f(a + (b - a)/2) = /2 + (b - a) /2 with a = 0 and b = 1 and T 2 = 2.

Simplifying and substituting the values results in:

2 = (1 - 0)[f(0) + f(1)]

/2 + (1 - 0)[f(0.5)]

/2\s2 = f(0) + f(1)/2 + f(0.5)/2

Trapezoidal rule T 4 gives us the following: T 4 = (b - a) [f(a) + f(b)]

f(a + (b - a)/4) + f(a + 3(b - a)/4) = /2 + (b - a)/2 f(a + (b - a)/2) = + (b - a)/4

where T 4 = 1.75, a = 0, and b = 1.

By simplifying and substituting the variables, we get with 1.75 = (1 - 0)[f(0) + f(1)].

/2 + (1 - 0)/2 [f(0.25) + f(0.75)] + (1 - 0)/4 [f(0.5)]

1.75 = f(0) + f(1)/2 + f(0.25) + f(0.75) + f(0.5)/4

We may rewrite the equations above as: 2 = f(0) + f(1)/2 + a 1.75 = f(0) + f(1)/2 + 2a + f(0.5)/4 since f(0.25) = f(0.75) = a.

By dividing the first equation by two and taking that result away from the second equation, we arrive at:

1.75 - 4 = f(0.5)/4 - a\s-2.25 = (f(0.5) - 4a)/4

In order to solve for a, we obtain: f(0.5) = 4a - 9 f(0.5) = 4a - 9.

When we use this f(0.5) value as a substitute in the first equation, we obtain:

2 = f(0) + f(1)/2 + a 2 = f(0) + f(1)/2 + a 2 = f(0) + f(1)/2 + a

We obtain the following by substituting f(0.5) = 4a - 9: 2 = f(0) + f(1)/2 + a 2 = f(0

To know more about integral visit:-

https://brainly.com/question/30267558

#SPJ1

An aircraft tow bar is positioned by means of a single hydraulic
cylinder connected by a 25-mm-diameter steel rod to two identical
arm-and-wheel units DEF. The mass of the entire tow bar is 200 kg,
and its center of gravity is located at G. For the position shown,
determine the normal stress in the rod.

Answers

The normal stress in the rod is 3.996 MPa.

The normal stress in the rod can be determined using the equation σ = F/A, where σ is the normal stress, F is the force, and A is the cross-sectional area of the rod.

First, we need to find the force F. This can be done by summing the forces in the vertical direction and setting them equal to zero, since the tow bar is in equilibrium.

ΣFy = 0

F - 200(9.81) = 0

F = 1962 N

Next, we need to find the cross-sectional area A of the rod. Since the rod has a diameter of 25 mm, its radius is 12.5 mm. The area can be found using the equation A = πr^2.

A = π(12.5)^2

A = 490.87 mm^2

Finally, we can plug in the values of F and A into the equation for normal stress to find σ.

σ = F/A

σ = 1962/490.87

σ = 3.996 MPa

Learn more about hydraulic system:

https://brainly.com/question/2166835

#SPJ11

create a driver in a class called studentmain. use the student class you created in question 8 above to create two students called abby and brady. assign grade 83.9 to abby and grade 75.5 to brady. use the tostring method to display/ print these two students.

Answers

Assuming that the Student class from question 8 is already defined, here's how we can create two instances of the Student class and display their information using the __str__ method:

class StudentMain:

   def __init__(self):

       abby = Student("Abby", "Smith", 83.9)

       brady = Student("Brady", "Jones", 75.5)

       print(abby)

       print(brady)

student_main = StudentMain()

In the above program, we create an instance of the StudentMain class that contains the __init__ method. Inside the __init__ method, we create two instances of the Student class called abby and brady. We assign the grade 83.9 to abby and the grade 75.5 to brady.

Then, we use the print statement to display the information of both students by calling the __str__ method on each instance. Finally, we create an instance of the StudentMain class to run the program.

The output of the program will be:

Name: Abby Smith, Grade: 83.9

Name: Brady Jones, Grade: 75.5

Learn more about programming:

https://brainly.com/question/26134656

#SPJ11

for a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers

To determine the force required to hold a gate with a width of 2 m at its location, use the following equation: F = W/2 x P, where W is the width of the gate, and P is the applied pressure.

To determine the force required to hold the gate ABC at its location for a gate width of 2 m into the paper, we need to use the following formula:
F = P × A × cosθ
Where:
F = Force required to hold the gate
P = Pressure of the fluid
A = Area of the gate
θ = Angle between the gate and the fluid
Since the gate width is 2 m into the paper, the area of the gate will be:
A = 2 × h
Where h is the height of the gate.
Substituting the values into the formula, we get:
F = P × (2 × h) × cosθ
Simplifying, we get:
F = 2 × P × h × cosθ

Therefore, the force required to hold the gate ABC at its location for a gate width of 2 m into the paper is 2 × P × h × cosθ.

Learn more about pressure:https://brainly.com/question/28012687

#SPJ11

When you use a thick syringe to drive a thin syringe, you lose strength but gain distance or do gain both strength and distance

Answers

According to Lebogang syringe, you gain distance but lose strength when you use a thick syringe to "drive" a thin syringe.

What is the syringe's operating principle?

A sliding plunger pump called a syringe is designed to fit securely inside a tube. A liquid or gas can be drawn into or released from the syringe through an aperture at the open end of the tube by pulling or pushing the plunger within the exact cylindrical tube, or barrel.

What does Pascal law on needles mean?

A force was generated inside the first syringe, the tubing, and the second syringe when we depressed the first plunger. Pascal's law states that a fluid's pressure in a closed container is uniform throughout the entire container.

To know more about Lebogang syringe visit:-

https://brainly.com/question/22722214

#SPJ1

The y axis points upward. The weight of the 4-kg rectangular plate acts at the midpoint G of the plate. The sum of the moments about the straight line through the supports A and B due to the weight of the plate and the force exerted on the plate by the cable CD is zero. What is the tension in the cable? Give the answer in N.

Answers

The tension in the cable CD is 19.6N.

To find the tension in the cable CD, we can use the principle of moments. According to this principle, the sum of the clockwise moments about a point is equal to the sum of the anticlockwise moments about the same point.

Let us consider the moments about point A. The weight of the plate (W) acts at the midpoint G, which is 0.5m from point A. The tension in the cable (T) acts at point D, which is 1m from point A. Therefore, the sum of the moments about point A is:

T × 1m = W × 0.5m

Substituting the given values, we get:

T × 1m = 4kg × 9.8m/s² × 0.5m

T = (4kg × 9.8m/s² × 0.5m) / 1m

T = 19.6N

Learn more about the tension in the cable CD:

https://brainly.com/question/28106997

#SPJ11

Other Questions
Determine the measurement of EF.EF = 3.47EF = 3.16EF = 1.39EF = 1.1 Name the artist who painted this painting. What medium did the artist choose for this painting? What advantages and disadvantages might the artist have considered before using this medium? 12) The diameter of a bracelet is 17.8 cm.Work out its circumference.Round your answer to an appropriate degree of accuracy. Answer the question below Find the solution to the differential equation: dy/dt=0.4(y200) when y=40 and t=0 What is the product of 55 and 10\sqrt{72}10 72 in simplest radical form? In circle V V, V W = 3 VW=3 and m W V X = 9 0 WVX=90 . Find the length of WX . Express your answer as a fraction times . 79.9 is 99% of what If the three-year present value annuity factor is 2.48685 and the two-year present value annuity factor is 1.73554, what is the present value of the $1 received at the end of three years? A man owes (a) $10,000 due in three months and (b) $20,000 due in seven months. He and his creditor agree to settle the obligations by two equal payments, one in five months and the other in 11 months. Find the size of each payment if money is worth 6% find :1-the comparison date is 11 months hence.2-the comparison date is now 3-the comparison date is 3 months How does Beatty's speech apply to Montag before he met Clarisse? Allison needs 13 inches of cloth for a sewing project, but the fabric store only sells the cloth by the centimeter. Since 1 inch is the same as 2. 54 centimeters, how much cloth will Allison buy in centimeters? Which could be the missing first term Using a typewriting, draw a poster that shows appreciation and responsibility for livelihood and resources Identify the expression and the value equivalent to 4 times 3 cubed. For this activity, you will either read a self-selected piece of literary work by an American Modernist, or you can use the provided piece. Then, you will write a short essay (three paragraphs in length) that discusses modernism, and how the specific piece of Modernism you chose fits into the characteristics of Modernism. You should support your ideas to show a connection between the work and Modernism with quotations directly from the work.Your first paragraph should introduce the ideas you are going to write about. The second paragraph should explain the ideas with quotations. The last paragraph should bring your idea to a conclusion and should reiterate your points and thesis. Anyhring helps really The Concept Of Stare Decisis Is Closely Related To The Concept Of A. The Bystander Rule. B. Statutory Law. C. The concept of stare decisis is closely related to the concept ofa. The bystander rule. b. Statutory law. c. Precedent. d. Enabling legislation A manufacturing company produces a final product that is assembled using one each of three different parts. The parts are manufactured within the company by two different departments. Owing to the different set up of the mechanics, the two departments produce the three parts at different rates. Table 2 gives the production rates and the available time per week to manufacture these three parts. Formulate this problem as a linear programming problem (LPP). Table 2 Department Available Production rate (Units per hour) hours per week Part 1 Part 2 Part 3 1 100 8 5 10 2 80 6 12 4 (-8x^2+10x+4)-(-4x+10) A student calculated a value to be $38.06 when they should have rounded up to $38.07. What is the percent error in their calculation?