Item 10
What color do acids turn litmus paper?


yellow


red


pink


blue

Answer:

See explanation

Explanation:

Friedel-Crafts alkylation frequently undergo polysubstitution because the process  leads to the addition of an electron donating alkyl group, which activates the benzene ring to further alkylation. The acyl group rather deactivates the ring towards electrophilic substitution.

When benzene is reacted with t-butyl chloride, the chief disubstituted product is the para rather than ortho isomer because the increased bulk of the tert-butyl group hinders attack at the ortho-sites.

Answer:

74.3kJ are transeferred

Explanation:

In the bomb calorimeter, the burning of C₈H₁₈ is producing heat that is been absorbed for the calorimeter and the water.

Heat absorbed calorimeter:

837J/°C * (33.8°C-15.0°C) = 15735.6J

Heat absorbed water:

C*m*ΔT

C specific heat of water (4.184J/g°C), m is mass of water (745g), and ΔT change in temperature (33.8°C - 15°C = 18.8°C)

4.184J/g°C*745g*18.8°C = 58601.1J

Heat released by the reaction:

15735.6J + 58601.1J = 74336.7J

Answer:

C

Explanation:

It will be the same. That's what moving down a column means. The properties are going to be quite similar.

Answer:

Object B has a density of 2.5 g/cm³ which is greater than object A by 1 g/cm³

Explanation:

Since we know that the formula for density is d=m/v, we can divide each mass by its corresponding volume to find the densities

12/8=1.5

20/8=2.5

So we know that object B has a greater density than object A by 1 g/cm³ (gram per cubic centimeter). Also the standard unit for density is kilograms per cubic meter but I used gram per cubic centimeter since they were the given units. 1cm=100m, 1000g=1km

Answer:

23 * 10^ 9 atoms of oxygen

Explanation:

From the molecular formula of dinitrogen tetraoxide;

molar mass of dinitrogen tetraoxide = 92 g/mol

hence;

92 g of dinitrogen tetraoxide contains 4 atoms of oxygen

x g of dinitrogen tetraoxide will contain 1 * 10^ 9 atoms of oxygen

x = 92 * 1 * 10^ 9/4

x =23 * 10^ 9 atoms of oxygen

Answer:

21 is the max but with the bread ypu could make 22 if you had 3 more cheese

Answer:

Explanation:

From the given information:

The equation for the reaction can be represented as:

[tex]2SO_2 + O_2 \to 2SO_3[/tex]

The I.C.E table can be represented as:

                     2SO₂              O₂                   2SO₃

Initial:             14                  2.6                     0

Change:        -2x                -x                      +2x

Equilibrium:   14 - 2x          2.6 - x                2x

However, Since the amount of sulfur trioxide gas to be 1.6 mol.

SO₃ = 2x,

then x = 1.6/2

x = 0.8 mol

For 2SO₂; we have 14 - 2x

= 14 - 2(0.8)

= 14 - 1.6

= 12.4 mol

For O₂; we have 2.6 - x

= 2.6 - 1.6

= 1.0 mol

Thus;

[SO₂] = moles / volume = ( 12.4/50) = 0.248 M ,

[O₂] = 1/50 = 0.02 M ,  

[SO₃] = 1.6/50 = 0.032 M

Kc = [SO₃]² / [SO₂]² [O₂]

= ( 0.032²) / ( 0.248² x 0.02)

= 0.8325

Recall that; the equilibrium constant for the reaction [tex]2SO_2 + O_2 \to 2SO_3[/tex] = 0.8325;

If we want to find:

[tex]SO_2 + \dfrac{1}{2}O_2 \to SO_3[/tex]

Then:

[tex]K_c = (0.8325)^{1/2}[/tex]

[tex]\mathbf{K_c = 0.912}[/tex]

Since no temperature is given to use in the question, it will be impossible to find the final temperature of the mixture.

Explanation:

My physiological make-up that governs the attributes I have and my climate, i.e. the conditions I have, are the variables influencing my limits. Biological make-up also regulates my prospects when they depend on my attributes, i.e. my ability and my environment , i.e. the conditions under which I am. This has been shown by experiments on twins, that our limits and opportunities are controlled by both genetics and environment.

Answer:

0.133

Explanation:

reaction between KIO3 and KI in acidic medium

IO3⁻ +5I⁻ +6h⁺ → 3I₂ + 3H₂O

I₂ reacts with thiosulphate

NaS₂O₃  → 2Na⁺ + S₂O₃²⁻

net reaction

IO⁻₃ + 6H⁺ + 6S₂O₃³⁻ → I⁻ + 3S₄O₆²⁻ + 3H₂O

mole of KIO₃

= molarity x volume

[tex]\frac{0.02mol}{L} *0.01L[/tex]

= 0.00002mol

a mole of KIO₃ has reaction with 6 mol of S₂O₃²⁻

= 2x6x10⁻⁵

= 0.00012 mol

volume = 0.90 ml

1 ml = 0.001L

0.90ML  = 0.0009L

to get concentration,

molarity/volume

= 0.00012/0.0009

= 0.133m

The concentration of the standard sodium thiosulfate solution is ; 0.133

The net chemical reaction equation

IO₃⁻  +  6H⁺  +   6S₂O₃³⁻ ---->  I⁻  +  3S₄O₆²⁻  + 3H₂O

First step : Determine the moles of  KIO₃

number of moles = molarity * volume

                            = 0.02 mol / L * 0.01 L

                            = 0.00002 mol

From the net chemical reaction equation

one ( 1 ) mole of KIO₃ reacts with 6 moles of S₂O₃²⁻

∴ number of moles in the reaction = 6 * 0.00002 = 0.00012 mol.

Final step : Determine the concentration of sodium thiosulfate solution

Given Volume = 0.90 ml = 0.0009 L

∴ concentration of sodium thiosulfate solution

   =  0.00012 / 0.0009  =  0.133

Hence we can conclude that The concentration of the standard sodium thiosulfate solution is ; 0.133

Learn more : https://brainly.com/question/15271672

Answer:

THe sun evapored the water and the wind helped dry it to.

Explanation:

Answer:

✔️Ionic bonds form between metal atoms and nonmetal atoms.

✔️The less electronegative atoms transfers one or more electrons to the more electronegative atom

✔️The metal atom forms a cation and the nonmetal atom forms an anion.

✔️The attraction between ions with an opposite charge forms an ionic bond.

Explanation:

Ionic bond refers to the bond formation which occurs when there is complete and permanent transfer of electrons from one metal atom to another non-metal atom. The metals, which are electropositive (less electronegative) loose their electrons while the non-metals, which are less electropositive (more electronegative) gain the electrons.

When the metal atom looses electrons, they form cations(become positively charged) while non-metal atom forms anions (become negatively charged). When the opposite charges attract each other, they form ionic bond.

Answer:

✔️ Ionic bonds form between metal atoms and nonmetal atoms.

✔️ The less electronegative atoms transfers one or more electrons to the more electronegative atom.

✔️ The metal atom forms a cation and the nonmetal atom forms an anion.

✔️ The attraction between ions with an opposite charge forms an ionic bond.

Answer:

A high-pressure area, high, or anticyclone, is a region where the atmospheric pressure at the surface of the planet is greater than its surrounding environment. Winds within high-pressure areas flow outward from the higher pressure areas near their centers towards the lower pressure areas further from their centers.

Explanation:

Answer:

L× W×H

Answer:

The correct answer is L x W x H :)

Answer:

d) The rate of forward reaction equals the rate of the reverse reaction

Explanation:

A dynamic equilibrium is attained when the rate of forward reaction is the same as reverse reaction. It occurs majorly in a reversible reaction. Thus, no change occurs in the reaction.

The process can be control by the immediate removal of the product as it is formed. This ensure that the reaction stops when all reactants are used up.

Answer:

Explanation:

A solution with a pH value of 7 is neutral i.e neither acidic nor alkaline. A solution with a pH less than 7 is said to be acidic, while one with a pH value more than 7 is alkaline. Acidity increases as the value decrease below 7, while alkalinity increases as the value increase about 7.

Given that H2A is a diprotic weak acid have pKa values of 5.0 ad 9.0, it will undergo dissociation in the solution as:

NOTE: These reactions are reversible reactions.

[tex]\mathbf{H_2A \to H^+ + HA^- \ \ \ pKa = 5.0}[/tex]

[tex]\mathbf{HA^- \to H^+ +A^{2-} \ \ \ pKa = 9.0}[/tex]

Thus;

The primary species is HA⁻

The secondary species is A²⁻

Answer:

D

Explanation:

Answer:

D

Explanation:

So. Radiation happens when heat moves as energy waves, called infrared waves, directly from its source to something else.... When the heat waves hits the cooler thing, they make the molecules of the cooler object speed up.

Answer:

See explanation

Explanation:

Coal is primarily used for electricity generation. The burning of coal leads to emission of gases such as oxides of carbon, oxides of sulphur, oxides of nitrogen and water vapour. All these go straight into the atmosphere.

Petroleum is primarily used as transportation fuels. The burning of petroleum oils mostly leads to the emission of oxides of carbon and sulphur together with water vapour into the atmosphere.

Answer:

The ball's kinetic energy is transforming to potential energy.

Explanation:

the ball is stopping resulting in potential energy

Answer:

C. mg and Ca

Explanation:

These chemical elements are collectively called as the Alkaline Earth Metals. Calcium and Magnesium are two of the six elements that fall into this category. The outer electronic structure of all these elements is similar due to which they all have similarity in their chemical and physical properties. They are all shiny, though fairly soft but still harder than alkali metals. Further, these are usually white or silvery coloured elements.They react with water to form hydrogen gas and metal hydroxide and with oxygen, they form oxides.

Answer:

The answer is B(scale)

Explanation:

Since the question asked about a range, the scale would be the most logical answer since scales are used to measure.

Answer:

the answer is C.

Explanation:

Answer:

a) What quantity (moles) of NaOH must be added to 1.0 L of 1.8 M HC2H3O2 to produce a solution buffered at pH = pKa?

Step 1: Data given

Volume of HC2H3O2 = 1.0 L

Molarity of HC2H3O2 = 1.8 M

Ka = 1.8*10^-5

ph = pK = -log(1.8*10^-5) = 4.74

Step 2:

Use the Henderson-Hasselbalch equation.

pH = pKa + log(A-/HA)

4.74 = 4.74 + log(A-/HA)

0 =  log(A-/HA)

A-/HA = 1

Consider X = moles of NaOH added (and moles of A- formed)

Remaining moles of HA = 1.8 - X

moles of A- = X

HA = 1.8 - X

X/(1.8-X) = 1

X =0.9

We have to add 0.9 mole NaOH to 1.0 L of 1.8 M HC2H3O2

To control we can do the following equation:

4.74 = 4.74 + log(0.9/0.9) = 4.74

b) What quantity (moles) of NaOH must be added to 1.0 L of 1.8 M HC2H3O2 to produce a solution buffered at pH = 4.00?

Step 1: Data given

Volume of HC2H3O2 = 1.0 L

Molarity of HC2H3O2 = 1.8 M

Ka = 1.8*10^-5

ph = 4

Step 2:

Use the Henderson-Hasselbalch equation.

pH = pKa + log(A-/HA)

4 = 4.74 + log(A-/HA)

-0.74 =  log(A-/HA)

A-/HA = 0.182

Consider X = moles of NaOH added (and moles of A- formed)

Remaining moles of HA = 1.8 - X

moles of A- = X

HA = 1.8 - X

X/(1.8-X) = 0.182

X =0.277

We have to add 0.277 mole NaOH to 1.0 L of 1.8 M HC2H3O2

To control we can do the following equation:

4 = 4.74 + log(0.277/1.523)

c) What quantity (moles) of NaOH must be added to 1.0 L of 1.8 M HC2H3O2 to produce a solution buffered at pH = 5.00

Step 1: Data given

Volume of HC2H3O2 = 1.0 L

Molarity of HC2H3O2 = 1.8 M

Ka = 1.8*10^-5

ph = 5

Step 2:

Use the Henderson-Hasselbalch equation.

pH = pKa + log(A-/HA)

5 = 4.74 + log(A-/HA)

0.26 =  log(A-/HA)

A-/HA = 1.82

Consider X = moles of NaOH added (and moles of A- formed)

Remaining moles of HA = 1.8 - X

moles of A- = X

HA = 1.8 - X

X/(1.8-X) = 1.82

X =1.16

We have to add 1.16 mole NaOH to 1.0 L of 1.8 M HC2H3O2

To control we can do the following equation:

5 = 4.74 + log(1.16/0.64) = 5

Explanation:

Answer:

It was formed from slow cooling.

the angle of the Sun’s rays

Explanation:

Answer:

D. It was formed from slow cooling.

Answer:

Theories

Explanation:

It is theories because it was a generalistee abstract or thinking generalising the principle of fact about Earth tectonic plates ,it was formulated and concluded as plate tectonic theories after many findings. The theories conclude that the Earth has an outer layer called lithosphere and lies overly a plastic layer called asthenosphere. The lithosphere is divided into several plates and they move close to each other where they diverge, converge or slip over one another.

Answer:

c. 3

Explanation:

Dicholorination of tertiary alkane ( i.e. isobutane) is a halogenation reaction which makes it possible to replace the alkyl functional group with halogenated chlorine.

When Isobutane is subjected to free radicals chlorination, three distinct dichlorination can be formed.

The mechanism of the formation of these products can be seen in the image attached below.

Answer:

- 0.454 °C

Explanation:

From the given information:

The mass of KCl = 10 grams

The molar mass of KCl = 74.55 g/mol

The molality can be calculated as:

[tex]Molality \ m = \dfrac{mass \ of \ KCl \times 1000}{molar \ mass \ of \ KCl \times 1100.0}[/tex]

[tex]Molality \ m = \dfrac{10 \ g \times 1000}{74.55 \ g/mol \times 1100.0}[/tex]

Molality m = 0.1219 M

For freezing point depression;

[tex]\Delta T_R = i \times k_f \times m[/tex]

The van't Hoff's Factor (i) for KCl  = 2

The molar depression of freezing point constant [tex]k_f[/tex] = 1.86° C/m

∴

[tex]\Delta T_R = 2 \times 1.86 \times 0.1219[/tex]

[tex]\mathbf{\Delta T_R = 0.454^0\ C }[/tex]

However, the freezing point of water is known to be = 0°C

Therefore, the freezing point of the solution

= 0 °C - 0.454 °C

= - 0.454 °C

Answer:

O The sound waves are reflected.

Explanation:

When sound waves released by a bat hits an object, the sound waves are reflected back.

Bats used sound reflection for echolocation to determine the position of nearby objects.

Also, they use it to determine the shape and size of objects.

Answer:

B

The sound waves are reflected.

Explanation:

Answer:

A

Explanation:

Nuclear fusion is a much more powerful reaction than any of the others.

Nuclear fusion of two hydrogen isotopes would expect to produce the most energy. Therefore, option (A) is correct.

Nuclear fusion can be defined as when two or more nuclei fuse together to form a single heavier nucleus. In this reaction, the matter is generally not conserved due to some of the mass of the nuclei being converted to energy.

For nuclear fusion, the nuclei must be brought closer to the reaction occurring. Each star in the universe, including sun, is shining due to nuclear fusion reactions. They produce large amounts of energy in this process.

In the Sun's core, hydrogen nuclei are get transformed into helium nuclei which are known as nuclear fusion. It takes place when four hydrogen nuclei fuse into each helium nucleus. During the Nuclear fusion process, some of the mass of hydrogen nuclei is transformed into energy.

Therefore, nuclear fusion is where hydrogen atoms combined to form helium to produce the most energy.

Learn more about nuclear fusion, here:

brainly.com/question/12701636

#SPJ2

Answer:

Will be more acidic

Explanation:

The equilibrium of NH3 in water is:

NH3(aq) + H2O(l) ⇄ NH4⁺(aq) + OH⁻(aq).

Where equilibrium constant, Kb, is:

Kb = 1.85x10⁻⁵ = [NH4⁺] [OH⁻] / [NH3]

From 0.10M NH3, the reaction will produce X of NH4⁺ and X of OH⁻ and Kb will be:

1.85x10⁻⁵ = [X] [X] / [0.10M]

1.8x10⁻⁶ = X²

X = 1.34x10⁻³ = [OH⁻]

As pOH = -log[OH⁻] = 2.87

And as pH = 14 - pOH

pH of the 0.10M NH3 is 11.13

Now, to find the pH of the NH4Cl and NH3 we need to use H-H equation for bases:

pOH = pKb + log [NH4⁺] / [NH3]

Where pKb is -log Kb = 4.74 and [] are moles of both compounds.

Moles of [NH4⁺] = [NH3] = 60mL, 0.060L*0.22M = 0.0132moles:

pOH = 4.74 + log [0.0132] / [0.0132]

pOH = 4.74

pH = 14 - 4.74 = 9.26

That means the pH of the resulting solution will be more acidic

Answer:

The actual concentration of the hydrochloric acid is 1.2M

Explanation:

The formula to be used here is that of concentration (popularly used during titration);

CₐVₐ/CbVb =nₐ/nb

where Cₐ is the concentration of acid (supposed to be 1.0 M but unsure)

Vₐ is the volume of acid (100 ml)

Cb is the concentration of base (1.3 M)

Vb is the volume of base (89.13 ml)

nₐ is the volume of acid

nb is the volume of base

The equation for the reaction described in the question is

HCl + NaOH ⇒ NaCl + H₂O

we can see from the above equation the ratio of the number of moles for both the acid and the base is 1:1

Thus;

Cₐ × 100/1.3 × 89.13 =1/1

Cₐ = 1.3 × 89.13/100

Cₐ = 1.2M

The actual concentration of the hydrochloric acid is 1.2M