In order to write a good problem statement, you need to identify the following components of the problem.
who, what, when, how
O True
O False

Answers

Answer 1

Answer:

True.

Explanation:


Related Questions

How to make this circuit for simulating on Proteus.

Answers

U can use the area rule formula

Lateral runout can be felt in the steering wheel even when the vehicle is
Select one:
a. At slower speeds
b. Just starting to move away from a stop
C. Just coming to a stop
d. Stopped

Answers

Lateral runout is felt in the steering wheel even at slower speeds. It leads to riding vibration and therefore poor ride quality.

Lateral runout refers to the side-to-side movement of the car's rotor as it rotates, which is caused by the off-center deviation of the rotor.

Lateral runout leads to riding vibration and therefore it is associated with poor ride quality.

Lateral runout can be properly quantified by using a dial indicator, which is a precision device used to measure linear displacements.

Learn more about lateral runout here:

https://brainly.com/question/21094536

Describe two fundamental reasons why flexural strength should depend on porosity

Answers

Answer: The elastic modulus and flexural strength are found to decrease with increased porosity. Fractography studies have been undertaken to identify the role of the pores on the fracture path. The deflection and cracking behavior of concrete structure depend on the flexural tensile strength of concrete. Many factors have been shown to influence the flexural tensile strength of concrete, particularly the level of stress, size, age and confinement to concrete flexure member, etc.

Explanation:

As part of the overall systems engineering process, there are a variety of software development methods, but the three most common at DoD are the Waterfall Approach, the Incremental Approach, and the ______________ Approach.

Answers

The three most common software development methods are the Waterfall Approach, the Incremental Approach, and the SPIRAL Approach. These methods depend on the team size and specific goals.

Software development is the sequential procedure that involves the division of the work into smaller and parallel stages in order to improve software design and product management.

The software development methods depend on both the team size and specific objectives.

The most common methodologies for software development include:

Waterfall Spiral Incremental Agile Continuous integration

Learn more about software development here:

https://brainly.com/question/14275830

6.03 Discussion: Then & Now - Safety
Discussion Topic
I'm Done
In this unit, you have learned about the evolution of the industry’s machines, through both technology and innovation. These improvements have reduced risk and injury to the Operating Engineers.

Choose one innovation or device.
Explain why you think that technology is the most important advancement in Operating Engineers’ safety.

Answers

Answer:

Information technology is important in our lives because it helps to deal with every day's dynamic things. Technology offers various tools to boost development and to exchange information. Both these things are the objective of IT to make tasks easier and to solve many problems.

An unknown relative passes away and bequeaths upon you a small tract of land in Amherst. You decide to build a two-story storage facility to make the best of your bequest. But your self-storage dream is in jeopardy due to a 10 meter thick layer of soft clay (N<4) on the site. You put on your best geotechnical engineer hat, hire a driller to pull up some samples, and send them off to a lab for a consolidation test. The report indicates that the clay is a dark grey, slightly sweet, kaolinite blend with a cy = 1x10-7 mº/s, single-drained, and an ultimate settlement of 0.73 meters. It does not make financial sense to install deep foundations, so you are interested in how long it will take to consolidate the clay layer using a passive load.
How long will it take for settlements of 25, 50, and 65 cm to occur?
If you need to build within the next 12 months and have at least 65cm of settlement to be viable, does it make sense to proceed?

Answers

Answer: It does make sense, because I've been involved in these careers and have a long family line of them. And other questions?

Explanation:

why does my man bun not have its own erodynamics

Answers

Answer:

umm okay for starters I have no clue lol.

what is aerodynamics????

How can we honor what we value and care about in a world of disruptive technologies like AI?

Answers

Answer: Well, that's a good question. When we look around us, we tend to see what technology has done for us, and how far it is taking us. It might be disruptive, but without it there would be no high tech military weapons, and then how would we defend ourselves? There would be no technology entertainment and without that, life would be very dull. In answering your question, we can be thankful for what it is and how far it has been taking us in life.

Explanation: Please mark a brainliest if correct it helps and have meery holidays!

Over 30 day period, a lake surface area is 1260 acres. The inflow is 36 cfs, thee outflow is 30 cfs. Seepage loss is 1.5 in. The total precipitation is 4.0 in. Evaporation loss is 6.0 in. Determine the water level change (inch) for the lake during this period.

Answers

Answer:

  -0.1 inches

Explanation:

The net inflow is ...

  36 cfs -30 cfs = 6 cfs

The number of seconds in 30 days is ...

  (3600 s/h)(24 h/da)(30 da) = 2,592,000 . . . . seconds/(30 days)

Then the volume of inflow is ...

  (6 ft^3/s)(2,592,000 s) = 15,552,000 ft^3

The number of square feet in 1260 acres is ...

  (1260 ac)(43560 ft^/ac) = 54,885,600 ft^2

So, the increase in depth due to the inflow is ...

  (15,552,000 ft^3)/(54,885,600 ft^2) ≈ 0.283353 ft ≈ 3.4002 in

__

The net change in water level is then ...

  inflow - seepage + precipitation - evaporation

  3.4 in -1.5 in +4.0 in -6.0 in = -0.1 in

The water level change in the period is -0.1 inch.

Help! Please explain also. Thank you

Answers

Answer:

17A) 52mm

17B) 132mm

17C) 67mm

18.) 34

Explanation:

For 17)

Each distance is determined by the total distances surrounding it. For example, 17A is 73mm - 21mm, which is 52mm.

For 18)

Set up the problem as an algebraic expression:

a + b + c + d = 115

Since you know 3 of the values, you can plug them in and subtract them from 115, which turns into 34.

12. How will the temperature change in a room with an open refrigerator door, once equilibrium is established

Answers

Answer:

then back into the room

Explanation:

If you leave the door open, heat is merely recycled from the room into the refrigerator, then back into the room. A net room temperature increase would result from the heat of the motor that would be constantly running to move energy around in a circle.

10. Which is of the following is not used in the
testing/analysis step?
A. Engineering notebooks.
B. Multiview drawings.
C. 3-D modeling software.
D. CNC machines.

Answers

A CNC machine stands for Computer Numerically Controlled Machine, they are used to Machine objects in hence create items, machine parts from prototypes. Hence the CNC machines are not used for testing/Analysis

D. CNC machines.

In Engineering the following items are basically needed for and during test/Analysis

Engineering notebooks: This is used to write down importance observations and findingsMulti-view drawings: This is also needed to visualise prototypes from different perspective or views3-D modelling software: e.g AutoCad , Autodesk Inventor, Revit to mention a few can be used to design and analyse project even before their actual implementation or design

Learn more:

https://brainly.com/question/9275741

Question 10 of 25: Select the best answer for the question. 10. In a series RC circuit, if the resistance is 8,000 ohms and X is 6,000 ohms, what is the impedance of the circuit O A. 8,600 ohms O B. 10,000 ohms O C. 14,000 ohms O D. 9,200 ohms Mark for review (Will be highlighted on the review page) << Previous Question Next Question >> M LL 5 - 1080 acer​

Answers

Answer:

  B. 10,000 ohms

Explanation:

|8000 +j6000| = √(8000² +6000²) = 1000√(64 +36) = 1000√100 = 10,000

The impedance is 10,000 ohms.

What is the first step in the decision-making process?

Answers

Answer: identify your decision. relize you need to make a decision.

Explanation:

Explain the conditions under which galvanic corrosion occurs

Answers

Answer:

Explanation:

Galvanic corrosion occurs when two dissimilar metals are immersed in a conductive solution and are electrically connected. One metal (the cathode) is protected, whilst the other (the anode) is corroded. The rate of attack on the anode is accelerated, compared to the rate when the metal is uncoupled.

Marketing in the fresh produce industry does not include buying, selling,
transportation or pricing?

Answers

Answer: I personally believe it does, because the Circle of Life, or what I think, at least buying and selling

Explanation:

Write a program that computes the square footage of a house given the dimensions of each room.Have the program ask the user how many rooms in the house and then request the dimensions of eachroom. Display the resulting total square footage.

Answers

#include

int main () {

printf("Program to calculate the square footage of the house.\n");

int total_rooms;

double length, width;

double total_square_footage = 0.0;

printf("Enter total number of rooms in the house:");

scanf("%d", &total_rooms);

for (int i = 0; i
printf("Enter the lenght and width of room %d: ", i+1);

scanf("%if %if", &lenght, &width);

total_square_footage += lenght*width;

}

printf("Total square footage of the house: %if\n", total_square_footage);

return 0;

}


Please mark it as brainliest answer:).

4. What is the ampacity of 8-gage copper wire?
O A. 45 amps
OB. 30 amps
O C. 50 amps
O D. 25 amps

Answers

The Answer is C 50 amps

Why is the tensile strength of a material important to consider when building a structure? Answer in a one page essay!!!

Answers

The field of strength of materials, also called mechanics of materials, typically refers to various methods of calculating the stresses and strains in structural members, such as beams, columns, and shafts. The methods employed to predict the response of a structure under loading and its susceptibility to various failure modes takes into account the properties of the materials such as its yield strength, ultimate strength, Young's modulus, and Poisson's ratio. In addition, the mechanical element's macroscopic properties (geometric properties) such as its length, width, thickness, boundary constraints and abrupt changes in geometry such as holes are considered.

The theory began with the consideration of the behavior of one and two dimensional members of structures, whose states of stress can be approximated as two dimensional, and was then generalized to three dimensions to develop a more complete theory of the elastic and plastic behavior of materials. An important founding pioneer in mechanics of materials was

need help answering this question

Answers

Answer: Wow. I just did that not so long ago. The mean is 76, i think the deviation is 73 and ill recall my notes for the next, hold on

Explanation:

A fully charged battery with 6 cells should indicate

Answers

Answer:

Battery Voltage

Voltage refers to the amount of electrical potential your battery holds. The standard automotive battery in today's vehicles is a 12-volt battery. Each battery has six cells, each with 2.1 volts at full charge. A car battery is considered fully charged at 12.6 volts or higher.

Who is responsible for shielding a welding arc to protect
the eyes and skin of all persons in the working area?

Answers

Answer:

manager and supervisor

Explanation:

What are minerals made of?
NO LINKS PLEASE
A. Different substances
B. Liquid substances
C. Two or more substances
D. The same substance throughout

Answers

Answer:

the answer I know is A. different substances. hope this helps :).

Explanation:

just always study hard and God bless.

PDC Bank is working on creating an AI application that enables customers to send SMS to the AI application to allow banking activities from their registered ID. Jane, the project engineer, has taken bank customer data from the last few years from the server and is using it to train the ML to recognize and authenticate actual users and to ensure unauthorized users are barred from entering the application. Suppose the AI application has been compromised, and the reason has been identified as compromised data being used to improve the ML accuracy. What kind of attack is the PDC Bank application subjected to?

Answers

The kind of attack that the PDC Bank application is subjected to due to compromised data is: Adversarial artificial intelligence

Adversarial artificial intelligence is a form of attack on a neural network where a wrong algorithm is entered into the system to deceive the end user.

The aim of this machine learning method is to deceive the end user.

This is what happens to the PDC Bank when its data was compromised in the course of improving the machine learning accuracy.

Learn more about Adversarial artificial intelligence here:

https://brainly.com/question/22190244

The section 5(a)(1) of the osh act is commonly known as

Answers

Answer:

general duty clause

Explanation:


a. State the functions of the followings
a. Commutator
b. Armature core
c. Field system
d. Brushes
e. Armature winding

Answers

Answer:

a. State the functions of the followings

a. Commutator:

the commutator reverses the current direction with each turn serving as a mechanical rectifier to convert the alternating current from the windings to unidirectional direct current in the external load circuit.

b. Armature core

Armature core is a physical structure made up of silicon steel stampings. The core is laminated to keep iron losses low. Armature winding is the main current carrying winding where we either provide(electric supply to motor) or extract e.m.f(collect electric power from generator).

c. Field system

The field winding basically form an electromagnet, that produces field flux within which the rotor armature of the DC motor rotates, and results in the effective flux cutting

d. Brushes

The function of brushes is that the brushes conduct current between stationary wires and moving parts of the electric Generator.

e. Armature winding

The winding wound on the core is given current through a DC supply. This current-carrying winding as under the influence of the magnetic field develops a force that develops a rotational torque. This torque enables the machine to rotate.

[tex] \bold \pink{ \underline{hope \: it \: helps}}[/tex]

Which of the following is a measurement at the nominal level?

A-personal income in a year

B-student grades

C-the color of a person's hair (blond, brunette, redhead)

D-temperature

Answers

Answer:

A-personal income in a year this is the answer

All of the following are employment requirements for a technician EXCEPT:
Select one:
a. Being drug and alcohol free
b. Having all of your ASE certifications
c. Having a clean driving record
O d. Having honesty, integrity, reliability, and quality

Answers

Answer:

I think it would be C but im not sure sorry if its wrong

Two students are discussing weathering and erosion factors. Leah says that both weathering and erosion involve wind, water, and ice. Justin says that only weathering involves ice, and that erosion involves plants and animals. Who is correct?


A. Justin, because plants cause erosion too.
B. Justin, because erosion does not involve ice.
C. Leah, because she forgot to mention plants and animals.
D. Leah, because glaciers are ice that cause erosion too.

Answers

Answer: Justin is false and it is both bottom because plants and animals are helpless to erosion and we cause it by deforestation and weather does too

Explanation:

Justin, because plants cause erosion too factors. This was the statement are the correct. Thus, option (a) is correct.

What is erosion?

The geological process through which earthen elements are worn down and transferred by wind and water or water is known as erosion. The migration of nanoparticles away from their origins is referred to as erosion. Erosion is the loss of dirt, rock, or dissolved substances by surface processes.

According to the two students are the different in the studies. There was the based on the Leah are the said on the different in the concept and the Justin said into the different in the concept are the perception of the topic are the different. Justin was the correct because plants are the cause of erosion too factors.

As a result, the Justin, because plants cause erosion too factors. Therefore., option (a) is correct.

Learn more about on erosion, here:

https://brainly.com/question/3852201

#SPJ2

Font
Paragraph
Styles
Editing
(1) What are the available methods for crop establishments in the field?
(2) Give a conceptual sketch for a seeder to establish soybean seeds in an
agricultural field of dry zone in Sri Lanka (Use software where
necessary/or a hand sketch with detail).
(3) Discuss the advantages of the seed dibbling mechanism and list the
crops that can be used dibbler.
A
(4) Discuss the key points to enhance agricultural productivity using the
fertilizer applicators.
(5) Calculations: Calibration of a seed drill
Number of furrows = 5
Spacing between the furrows = 8 cm
Diameter of the ground wheel = 0.65 m
Number of rotations of the ground wheel = 300
Weight of seed collected = 20 kg
Calculate the seed rate in kg/ha
The average number of seeds dropped per one revelation =6
Calculate the
(1) seed rate and
(ii)
hole to hole spacing

Answers

Answer:

1) Therefore it was so much more than one answer my head
Other Questions
In your ear, a part that looks like a coiled tube is the:A. ossiclesB. retinaC. cochleaD. auditory coretx Marisol has 5 times as many books as jerry. Jerry has 15 books. How many more books does marisol have What is the relationship between communism and the Vietnam War? Cells that do not have a nuclear membrane are called The characteristics fingerprints of light produced when a substance is given energy are called A. GroundlingsB. QuantumsC. SpectrumsD. Amplitudes A blueprint shows the master bedroom to be 7 1/2 inches long and 6 inches wide. The scale on the blueprint is 3 in :5 ft. What is the area (in sq ft) of the actual bedroom? 1 mi = 1.6 km How many miles are in 39.2 kilometers? 94 points!! Calories Used While Swimming for 30 Minutes Type of Stroke 56-kg woman 77-kg man Backstroke 95 130 Breaststroke 91 125 Fast Crawl 87 120 Slow Crawl 95 130 Sidestroke 68 90 Treading Water 35 48 Table 2-1 If a female wanted to burn the most calories swimming, she should choose the treading water. Please select the best answer from the choices provided T F Write and solve a system of THREE inequalities that models the situation below. Terrence is going to make and sell cupcakes and giant cookies as a fundraiser to earn money for his bank uniform. He sells the cupcakes for $1.25 each and the cookies for $0.75. He knows he will sell at least 10 cupcakes and 24 cookies. He wants to make at least $50. Find a possible combination of cupcakes and cookies he needs to sell to meet his goal. 0.03249 in standard form to 3 significant figures is(A) 3.24 101(B) 3.24 102(C) 3.25 102(D) 3.25 103 Match these items .1 . scalespistil and stamen2 . eggcone parts3 . mitosisfungi parts4 . hyphaeleaf and spore case5 . moldvegetative reproduction6 . flower partscell division7 . cherry treemale cell8 . spermfemale cell9 . without seedsflowering plant10 . fern partsfungi what is 1+1-2+3+1-4+5-5+6+2-8+8 x 2-16+4x5-20 = ?first to answer correctly gets marked brainliest Who is the only US president to be elected more than 2 terms [tex]\sf 12(3+5)[/tex] the sum of three terms in a GP is 14 and the sum of their squares is 84, find the terms my Christmas present to you A cable company has a one time installation fee and then a monthly charge to use their service. The total cost of modeled by the function y=130x+119. Which statement represents the meaning of each part of the function? Brianna received an overall IQ score of 117 on the Wechsler Scale. This means that Brianna has scored approximately____________ standard deviation above the mean IQ score of ____________. A. 2; 90 B. 1; 110 C. 2; 75 D. 1; 100 In order to become a law, what must a bill do? I'm leaving. See you all next time. Take care and stay safe. Have a blessed day.