The angular position of the large, cylindrical roller with a diameter of 4.00 m is a measurement of the amount of rotation of the roller in relation to a fixed axis.
In a manufacturing process, a large, cylindrical roller is used to flatten material fed beneath it. The diameter of the roller is 4.00 m, and, while being driven into rotation around a fixed axis, its angular position is expressed as. Angular position refers to the position of a rotating object relative to a reference point. It is a measure of how far an object has rotated around a particular axis relative to a reference point. The angular position of an object is typically measured in radians or degrees. The angular position of a rotating object can be described as a function of time by its angular velocity and its initial angular position. The formula for angular position is given as,θ = ωt + θ₀where,θ is the angular position of the object at time tω is the angular velocity of the objectθ₀ is the initial angular position of the object.
For the given problem, the angular position of the cylindrical roller is expressed as,θ = ωt + θ₀where,ω = Angular velocity
t = Time
θ₀ = Initial angular position
Given,
The diameter of the roller = 4.00 m
Radius of the roller = 2.00 m
The angular position of the roller is expressed as,
θ = 2.00t
where,θ is in radians and t is in seconds.
Therefore, the angular position of the roller is given by the formula,θ = ωt + θ₀
where,ω = 2.00 rad/st = Timeθ₀ = 0So,θ = 2.00t rad
By substituting the value of ω into the formula θ = ωt, we can calculate the angular position of the roller in terms of time.
In other words, it is the angle through which the roller has been rotated around a point of reference.
To know more about Angular position please visit :
https://brainly.com/question/14864570
#SPJ11
In a manufacturing process, a large, cylindrical roller is used to flatten material fed beneath it. The diameter of the roller is 4.00 m, and, while being driven into rotation around a fixed axis, its angular position is expressed as θ = 2.10t2 − 0.850t3 where θ is in radians and t is in seconds. (a) Find the maximum angular speed of the roller. rad/s (b) What is the maximum tangential speed of a point on the rim of the roller? m/s (c) At what time t should the driving force be removed from the roller so that the roller does not reverse its direction of rotation? s (d) Through how many rotations has the roller turned between t = 0 and the time found in part (c)? rotations
what is the purpose of the small propeller at the back of a helicopter that rotates in the plane perpendicular to the large propeller?
The small propeller located at the tail of a helicopter is called the tail rotor. Its purpose is to counteract the torque produced by the main rotor of the helicopter.
When the main rotor spins, it produces a torque that tries to rotate the body of the helicopter in the opposite direction. This is due to Newton's Third Law, which states that for every action, there is an equal and opposite reaction. The tail rotor, which is mounted perpendicular to the main rotor, produces a sideways thrust that counteracts the torque of the main rotor and keeps the helicopter stable.
The pilot can control the amount of thrust produced by the tail rotor through the helicopter's pedals. By pushing on the left pedal, the pilot increases the thrust of the tail rotor and causes the helicopter to rotate to the left. Similarly, pushing on the right pedal increases the thrust on the right side of the tail rotor and causes the helicopter to rotate to the right. This allows the pilot to control the direction and orientation of the helicopter in flight.
Learn more about Newton's Third Law:
https://brainly.com/question/25998091
#SPJ11
Part F
Using your outline and the materials you've gathered, write a 250- to 500-word paper using word processing software. Be
sure to proofread and revise your writing to catch any errors in grammar, spelling, logic, or organization. Add a works
cited page at the end to give credit to your sources. Submit your completed paper and this activity to your teacher for
evaluation.
Please base it off of ‘compare and contrast analog and digital signals to determine which is more reliable for encoding and transmitting information’
Analog signals are continuous waves that keep changing over a time period, while digital signals are binary signals that consist of 0s and 1s1. Digital signals are more resistant to noise and interference, which makes them more reliable when compared to analog signals.
Digital signals are also easier to transmit and store, and they can be compressed without losing quality1. However, analog signals can carry an infinite amount of data, and they are less expensive to operate than digital signals.
In conclusion, digital signals are more reliable than analog signals for encoding and transmitting information because they are more resistant to noise and interference, and they are easier to transmit and store.
What is the difference between analog and digital signals?Analog signals are continuous waves that keep changing over a time period, while digital signals are binary signals that consist of 0s and 1s. Analog signals are described by the amplitude, period or frequency, and phase, while digital signals are described by bit rate and bit intervals. Analog signals have no fixed range, while digital signals have a finite number of values, i.e., 0 and 1. Analog signals are more prone to distortion, while digital signals are more resistant to noise and interference .
To know more about digital signals , visit :
https://brainly.com/question/14825566
#SPJ1
How do I write this in scientific Notation? Help quick
Answer:
2,500,000,000,000 = 2,5 x 10^12
0.00023 = 2.3 x 10^-4
101 = 1.01 x 10^2
0.0000000032 = 3.2 x 10^9
Explanation:
Hope it helps :) !!!!!!!!!!!!
since Which animal is a vertebrate?(1 point)
shrimp
octopus
crab
fish
The animal that is a vertebrate is a fish.
What are vertebrate animals?Vertebrates are animals that possess a backbone, also known as a vertebral column or spinal column. The backbone is composed of individual vertebrae, which protect the spinal cord and provide support for the body.
Vertebrates are a diverse group of animals and include fish, amphibians, reptiles, birds, and mammals. They are characterized by having a complex nervous system, a closed circulatory system, and a well-developed brain.
Vertebrates are also capable of a wide range of behaviors and have adapted to live in various habitats, from the depths of the ocean to the highest mountains.
Learn about Vertebrates here https://brainly.com/question/19672046
#SPJ1
which constellation appears to have the shape of a big ladle or a question mark?
Answer:
Ursa Major
Explanation:
The constellation that appears to have the shape of a big ladle or a question mark is Ursa Major (also known as the Great Bear).
The inner orbit is farthest from the nucleus.
O True
O False
HELP PLEASE
Answer: False
Explanation:
How much energy is needed to boil 1.5kg of water? Specific Latent Heat of Fusion = 2,260,000J/kg
Taking into account the definition of latent heat, the energy needed to boil 1.5 kg of water is 3,390,000 J.
Definition of latent heatLatent heat is defined as the energy required by a quantity of substance to change state.
When this change consists of changing from a solid to a liquid phase, it is called heat of fusion and when the change occurs from a liquid to a gaseous state, it is called heat of vaporization.
The heat Q necessary to provide for a mass m of a certain substance to change phase is equal to
Q = m×L
where L is called the latent heat of the substance and depends on the type of phase change.
Energy needed in this caseIn this case, you know:
Q= ?m= 1.5 kgL= Specific Latent Heat of Fusion = 2,260,000 J/kgReplacing in the definition of latent heat:
Q = 1.5 kg× 2,260,000J/kg
Solving:
Q= 3,390,000 J
Finally, the energy needed is 3,390,000 J.
Learn more about latent heat:
brainly.com/question/14323589
#SPJ1
name and explain the 3 categories of the municipality
Answer:
please make me brainalist and keep smiling dude
Explanation:
The Act provides for the constitution of 3 types of municipalities, depending upon the size and area in every state.Nagar Panchayat (for an area in transition from rural to the urban area);Nagar Panchayat (for an area in transition from rural to the urban area);Municipal Council for the smaller urban area; and.Nagar Panchayat (for an area in transition from rural to the urban area);Municipal Council for the smaller urban area; and.Municipal Corporation for a larger urban area.Answer:
Explanation:
Nagar Panchayat (for an area in transition from rural to the urban area);
Nagar Panchayat (for an area in transition from rural to the urban area);Municipal Council for the smaller urban area; and.
Nagar Panchayat (for an area in transition from rural to the urban area);Municipal Council for the smaller urban area; and.Municipal Corporation for a larger urban area.
(PLS HELP ME NOW!!!!!)
Answer:
D
Explanation:
Determine the forces in all the members of the complex truss. State if the members are in tension or compression. Hint: substitute member ad with one placed between e and c
We can ascertain the forces in each component of the complex truss and whether they are in tension or compression by using the method of joints or method of sections.
To determine the forces in all the members of the complex truss, we can first substitute member AD with one placed between E and C. This will result in a simpler truss with fewer members and easier to analyze.
Once we have the simplified truss, we can apply the method of joints or method of sections to find the forces in each member. The method of joints involves analyzing the forces acting at each joint in the truss, while the method of sections involves cutting through the truss to create a section and analyzing the forces acting on that section.
After we have found the forces in the members, we can determine whether they are in tension or compression. A member is in tension if it is being stretched, while it is in compression if it is being compressed or shortened. This depends on whether the forces acting on the member are pulling it apart or pushing it together.
In general, a truss is designed so that all members are either in tension or compression, and none of them are in bending or shear. This is because trusses are designed to resist only axial loads, and not bending or shear loads.
Therefore, by using the method of joints or method of sections, we can determine the forces in all the members of the complex truss and whether they are in tension or compression.
To learn more about forces refer to:
brainly.com/question/13191643
#SPJ4
how does the president fufill the role of a economic leader
The president plays the part of an economic leader by planning the government budget.
What does an economic leader do?examining data on monetary movements and trends. examining federal policies and initiatives to make sure they continue to support strong economic principles. advocating for economic measures that will help American workers.
What function is the president performing?The President of the United States, who also serves as head of state and commander-in-chief of the armed forces, is given control over the Executive Branch. The president's responsibility as chief legislator is to have an impact on the creation of laws. Through his State of the Union Address, the president contributes to setting the country's policy agenda.
To know more about economic leader visit:-
https://brainly.com/question/29390261
#SPJ1
Explain how velocity, displacement, angle, and time are related in projectile motion
Projectile motion is the motion of an object that is projected into the air and then follows a path determined by the forces acting on it.
Velocity, displacement, angle, and time are all related in projectile motion. The velocity of a projectile determines its speed and direction. The initial velocity of the projectile is composed of two components, the horizontal velocity and the vertical velocity. The horizontal velocity remains constant throughout the projectile motion, while the vertical velocity changes due to the force of gravity. The displacement of the projectile is its change in position during the motion. The displacement is dependent on both the initial velocity and the time elapsed. The horizontal displacement is determined by the horizontal velocity and time, while the vertical displacement is determined by the vertical velocity and time. The angle of projection is the angle at which the projectile is launched into the air. The angle affects the initial velocity components and determines the shape of the projectile path. The time of flight is the total time that the projectile is in the air. The time of flight is dependent on the vertical velocity component, the angle of projection, and the height of the launch point. In summary, the velocity, displacement, angle, and time are all related in projectile motion, and changes in any one of these factors will affect the trajectory of the projectile.
To learn more about Projectile click the link below
brainly.com/question/28043302
#SPJ4
1. A fairground ride consists of a large vertical drum that spins so
fast that everyone inside it stays pinned against the wall when
the floor drops away. The diameter of the drum is 10 m. Assume
that the coefficient of static friction between the drum and the
rider's clothes is 0. 15. What is the angular velocity of the drum at this speed?
The angular velocity of the drum is approximately 0.558 radians per second.
To find the angular velocity of the drum, we can use the centripetal force equation:
F = ma = mrω^2
where F is the force of friction between the drum and the rider's clothes, m is the mass of the rider, r is the radius of the drum (which is half its diameter, or 5 m), and ω is the angular velocity of the drum.
We can rearrange this equation to solve for ω:
ω^2 = F / mr
The force of friction can be found using the coefficient of static friction and the normal force, which is the weight of the rider:
F = μN = μmg
where μ is the coefficient of static friction, m is the mass of the rider, and g is the acceleration due to gravity.
Putting it all together, we have:
ω^2 = (μmg) / mr
Plugging in the given values, we get:
ω^2 = (0.15)(mg) / (5m)
where g is approximately 9.81 m/s^2.
Simplifying:
ω^2 = 0.03g
ω = sqrt(0.03g)
ω = sqrt(0.03 x 9.81)
ω = 0.558 rad/s
Thus the value of angular velocity is 0.558 radians per second.
For such more questions on angular velocity:
brainly.com/question/20432894
#SPJ11
A baseball is batted. It's a long fly ball. 5. 0 seconds later the ball reaches the outfield 100 meters away and returns to the height from which it left the bat. A. What maximum height did the baseball reach?
The maximum height reached by the baseball is 24.5 meters.
We can use the kinematic equation for the vertical motion:
h = vi*t + (1/2)at^2
where h is the maximum height reached by the baseball,
vi is the initial vertical velocity,
a is the acceleration due to gravity (-9.8 m/s^2),
and t is the time taken for the ball to reach its maximum height.
At the maximum height, the vertical velocity of the ball is zero. Therefore, we can write:
h = (1/2)at^2
We know that the total time for the baseball to travel to the outfield and return is 5 seconds, so the time taken to reach the maximum height is half of that or 2.5 seconds.
After substituting the values we know, we get:
h = (1/2)(-9.8 m/s^2)(2.5 s)^2
h = 24.5 meters
Therefore, the maximum height the baseball reached is approximately 24.5 meters.
Learn more about velocity:
https://brainly.com/question/9552358
#SPJ4
A thief is running away from a scene and reaches a speed of 10 m/s in 5 seconds what is the thief acceleration
A. 2 m/s^2
B. 8 m/s^2
C. 18 m/s^2
D. 1 m/s^2
Answer: [tex]2 m/s^{2}[/tex] (Assuming the thief starts from 0 m/s)
Explanation:
First you take the final velocity (10) and subtract the initial velocity (0)
[tex]10-0=10[/tex]
Then you divide the difference by the time to get the acceleration
[tex]10/5=2[/tex]
This all uses the equation
[tex]V_{f}-V_{i}=ta[/tex]
a car is traveling up one side of a hill and down the other side. the top of the hill is a circular arc with a radius of 45.0 m. determine the maximum speed the car can have without losing contact with the road.
When a car travels up one side of a hill and down the other, it can lose contact with the road if it goes too fast. The maximum speed the car can have without losing contact with the road is 21.8 m/s.
The weight of the car is equal to its mass times gravity, which is equal to m * g. The normal force, on the other hand, is the force that the ground exerts on the car, and it is equal in magnitude to the weight of the car but in the opposite direction.
When the normal force is zero, the car loses contact with the road, which is why we're looking for the maximum speed that will still produce a normal force greater than zero.
Thus, the maximum speed can be found using the equation: v² / R = g; where v is the maximum speed of the car,
R is the radius of the circular arc, and
g is the acceleration due to gravity.
Substituting the given values gives: v² / 45.0 = 9.81
Solving for v, we get: v = √(45.0 * 9.81) = 21.8 m/s
Therefore, the maximum speed the car can have without losing contact with the road is 21.8 m/s.
To know about speed, refer here:
https://brainly.com/question/29495189#
#SPJ11
5. A block with mass m = 250 g is compressing a spring with a spring constant k = 60 N/m a distance of d = 16.0 cm from its equilibrium position. If the mass let go, how high above its initial position does the mass rise?
Answer:
The potential energy stored in the spring when it is compressed by a distance of 16.0 cm can be calculated using the formula:
U = (1/2) k x^2
where U is the potential energy, k is the spring constant, and x is the displacement from equilibrium position.
Plugging in the given values, we get:
U = (1/2) * 60 N/m * (0.16 m)^2
U = 0.768 J
When the mass is released, the potential energy stored in the spring is converted to kinetic energy of the mass as it moves upward. At the highest point, all of the kinetic energy is converted back to potential energy. The total mechanical energy of the system (spring + block) is conserved, so we can equate the potential energy at the highest point to the initial potential energy stored in the spring:
mgh = U
where m is the mass of the block, g is the acceleration due to gravity (9.81 m/s^2), h is the maximum height reached by the block.
Plugging in the values, we get:
(0.250 kg) * (9.81 m/s^2) * h = 0.768 J
Solving for h, we get:
h = 0.768 J / (0.250 kg * 9.81 m/s^2) ≈ 0.312 m
Therefore, the block rises to a maximum height of approximately 0.312 m above its initial position.
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
In a resistive circuit if the current is increased to two times, the percentage change in the amount of heat dissipated in the circuit would be
Answer:
P = I V = I*2 R power used in resistive circuit
Doubling the current will cause a 4X increase in power consumed
How far will the driver be behind the vehicle in front at 30mph ? Give your answer to 2 significant figures.
The driver should be at least 39 meters behind the vehicle in front at 30mph. Rounded to 2 significant figures, this is 39 meters
How did we arrive at this value?The recommended safe following distance while driving is at least 3 seconds behind the vehicle in front of you. At 30mph (or approximately 13 meters per second), a 2-second following distance would be:
3 seconds x 13 meters/second = 39 meters
Therefore, the driver should be at least 39 meters behind the vehicle in front at 30mph. Rounded to 2 significant figures, it could then be concluded that the driver should be at least 39 meters.
learn more about recommended safe following distance: https://brainly.com/question/30549283
#SPJ1
Determining the distance to stars can be challenging. The parallax method is one way of finding the distance to many stars around us. Your research team measures the parallax of two stars that have a distance of 5 degrees from each other in the night sky: The first star has a parallax of 0.11 arcsec, and the second has a parallax of 0.13 arcsec. How far apart are the two stars from each other? Express your answer in light-years
The distance between the two stars is approximately 35.65 light-years.
What is the distance between the stars?
To determine the distance between the two stars in light-years, we need to use the parallax formula:
distance = 1 / (parallax angle in arcseconds)
For the first star, the distance is:
distance = 1 / 0.11 = 9.09 parsecs
For the second star, the distance is:
distance = 1 / 0.13 = 7.69 parsecs
To determine the distance between the two stars, we can use the law of cosines:
c² = a² + b² - 2abcos(C)
where;
c is the distance between the two stars, a and b are the distances to each star, and C is the angle between the two stars.We know that the angle between the two stars is 5 degrees, or 300 arcminutes, or 18,000 arcseconds.
Converting the distances to light-years:
a = 9.09 x 3.26 = 29.59 light-years
b = 7.69 x 3.26 = 25.06 light-years
Substituting into the law of cosines:
c² = (29.59)² + (25.06)² - 2 x 29.59 x 25.06 * cos(18,000 arcseconds)
c² = 1,271.57
c = 35.65 light-years
Learn more about distance between stars here: https://brainly.com/question/14376690
#SPJ1
A uniform electric field with a magnitude of 5.0 x 10^2 N/C is directed parallel to the positive x-axis toward the origin. What is the change in electrical energy of a proton (q= 1.60 x 10 ^-19 C ) as it moves from x = 5 m to x = 2 m?
The change in the electrical energy of a proton would be 2.40 x 10^-16 J.
Change in electrical energyThe change in electrical potential energy of a charged particle in a uniform electric field is given by the equation:
ΔPE = qEd
where q is the charge of the particle, E is the magnitude of the electric field, and d is the distance moved by the particle in the direction of the electric field.
In this case, the proton has a charge of q = 1.60 x 10^-19 C and moves a distance of d = 5 m - 2 m = 3 m in the direction of the electric field. The magnitude of the electric field is E = 5.0 x 10^2 N/C.
Substituting these values into the equation, we get:
ΔPE = (1.60 x 10^-19 C)(5.0 x 10^2 N/C)(3 m)
ΔPE = 2.40 x 10^-16 J
Therefore, the change in electrical energy of the proton as it moves from x = 5 m to x = 2 m is 2.40 x 10^-16 J.
More on electrical energy can be found here: https://brainly.com/question/16182853
#SPJ1
if two objects that have charges of +8 C and -4 C touch each other and are then separated what will be the charge on each object
Answer:
30q1
Explanation:
Uniformly charged spheres are “touching”. 4. What must be the distance between point charge q1 = 26.0µC and point charge q2 = −47.0µC
The distance of east-west highway is 1.030 x 10^6m. How much is the value of mantissa in this number?
(a) 1.030
(b) 0.030
(d) 6
(c) 10
The mantissa distance, which is referred to as the decimal portion of a logarithm, has a value of 0.030 in this number.
Is the decimal portion of a number's logarithmic value referred to as the mantissa?A common logarithm's integral portion is known as the characteristic, and its non-negative decimal portion is known as the mantissa. If log 39.2 equals 1.5933, then 1 is the characteristic and 5933 is the logarithm's mantissa.
What is the number's logarithmic mantissa?The base-10 logarithm's mantissa, which represents the digits of the provided integer but not its magnitude, is a common logarithm's fractional component. For instance, both ㏒10201.3010 and ㏒102002.3010 have a mantissa of 0.3010.
To know more about distance visit:-
https://brainly.com/question/11567236
#SPJ1
he frequency of a wave does not change as it passes from one medium to another. What will most likely happen if a light wave moves from the air into a solid? The wavelength of the light wave will increase. The speed of the light wave will decrease. The wavelength of the light wave will remain the same. The speed of the light wave will remain the same.
Answer:
Generally. the index of refraction of the solid is greater than 1
V(air) / V(solid) = N (index of refraction)
Since V (solid) = V (air) / N and V(soiid) = λ(solid) * f
V(solid) / V(air) = [V (air) / N] / (V air) = 1 / N
The velocity is less in the solid and the wavelength is also less
Galaxies are some of the most beautiful objects in the universe and are observable in many differ- ent shapes, colours and sizes. Astronomers have classified galaxies into different groups: spiral (SA), intermediate spiral (SAB), barred spiral (SB), lenticular (SO), elliptical (E), and irregular (Irr). Which galaxy classes are illustrated by the shapes below (A1-A4)? Find the correct class (B1-B4) and name (C1-C4) of each galaxy shown in the images: NGC 2337, NGC 300, NGC 1365, Messier 110
We can see here that the galaxy classes illustrated by the shapes are:
A1: Irregular (Irr)
A2: Lenticular (SO)
A3: Spiral (SA)
A4: Intermediate spiral (SAB)
B1: Lenticular (SO)
B2: Irregular (Irr)
B3: Intermediate spiral (SAB)
B4: Elliptical (E)
What is a galaxy?A galaxy is a vast system of stars, gas, dust, and other matter that is held together by gravity. It is one of the fundamental building blocks of the universe.
Galaxies come in a variety of shapes and sizes, ranging from small dwarf galaxies to massive elliptical galaxies. Our own Milky Way galaxy contains billions of stars and is just one of countless galaxies in the observable universe.
Galaxies play an important role in the evolution of the universe, as they are the sites of star formation, supernovae explosions, and the merging of smaller galaxies into larger ones.
Learn more about galaxy on https://brainly.com/question/13956361
#SPJ1
define moment with complete in depth explanation
Answer: In its most basic form, a moment is the product of the distance to a point, raised to a power, and a physical quantity (such as force or electrical charge) at that point: is the physical quantity such as a force applied at a point, or a point charge, or a point mass, etc.
The Principle of Moment says that when a system is in equilibrium the sum of its clockwise moments will be equal to the sum of its anticlockwise moments. Some examples where moments i.e. turning effects are applicable will involve levers, like seesaws, opening and closing doors, nutcrackers, can openers, and crowbars.
Explanation:
a block of mass m is attached to the end of a horizontal massless spring (spring constant k), resting on a frictionless table. the mass is then given an initial displacement x0 from equilibrium, and an initial speed v0. ignoring friction, use energy methods to finda. its maximum speed, andb. its maximum stretch from equilibrium, in terms of the given quantities.
The maximum speed of the mass is given by vmax = sqrt((k/m)xmax²) and the maximum stretch from equilibrium is given by xmax = ((2/m)(1/2)mv0²/k).
The mass is given an initial displacement x0 from equilibrium and an initial speed v0. The maximum speed and maximum stretch from equilibrium can be found using energy methods.Ignoring friction, the total energy of the system is given as E = (1/2)kx0² + (1/2)mv0², where (1/2)kx0² represents the potential energy of the spring, and (1/2)mv0² represents the kinetic energy of the mass.
At maximum speed, all potential energy is converted to kinetic energy. Therefore, we can say that (1/2)kxmax² = (1/2)mvmax², where xmax is the maximum stretch of the spring from equilibrium and vmax is the maximum speed of the mass. Therefore, we can say that (1/2) mvmax² = (1/2) kx0², where x0 is the initial displacement of the mass from equilibrium.
Therefore, the maximum speed of the mass is given by vmax = ((k/m)xmax²) and the maximum stretch from equilibrium is given by xmax = ((2/m)(1/2)mv0²/k). These equations can be used to find the maximum speed and initial displacement and velocity.
Know more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ11
If a door within a wall is open sound produced on one side of the wall will be able to reach a person anywhere on the other side of the wall due to
It is generally knowledge that sound waves may bend around corners or pass through doorways, enabling us to hear conversations taking place in nearby rooms.
Why do we hear noise on the opposite side of the barrier?The air on the opposing side of the barrier also vibrates as a result of the audio hitting the wall. You will be able to hear some sound through a sturdy, solid wall since it won't spread the vibrations too much.
What is the term for when sound penetrates a wall?A reflecting wave is created as a sound crosses a room and collides with a wall, reintroducing some of that waveform back into the space. The originating sound will endeavor to go through the wall and into the next space. Sound Transmission is the name for the energy that remains after this transmission.
To know more about sound waves visit:
https://brainly.com/question/11797560
#SPJ1
You produce a wave by oscillating one end of the rope up and down 2. 0 times a second. What is the frequency of this wave?
Waves that vibrate upward and downward can be thought of as having a frequency of 2 Hz, and waves that move a certain distance in a certain amount of time—1 second—have a wave speed of 20 m/s.
The wave is what?A wave is an energetic disturbance in such a medium that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electric or magnetic strength, an electric potential, or a change in temperature are a few examples.
What is With an illustration, define a wave?Waves are aberrations that spread or migrate away from their source. Waves can transport energy between sites, but they do not always transport mass. Ocean waves, light waves, and sound waves are typical types of waves.
To know more about Wave visit:
https://brainly.com/question/30783512
#SPJ1
Need help this is a grade
Answer: C
Explanation: When you have a tomato for example, it absorbs every color but red and therefore, appears red.