If 750 mL of a 5M solution of hydrochloric acid is used to neutralize excess sodium
hydroxide, then how many moles of salt will be produced?

Answer:

I forgot dude sorry so sorry

Answer:

255 grams of ammonia

Explanation:

To solve this problem, we need to use the balanced chemical equation for the reaction between ammonia and water:

NH3 + H2O → NH4+ + OH-

From this equation, we can see that one molecule of ammonia reacts with one molecule of water to produce one hydroxide ion (OH-) and one ammonium ion (NH4+). Therefore, we need the same number of molecules of ammonia as water to form the products.

So, if we have 9.09X^23 molecules of water, we need the same number of molecules of ammonia:

9.09X^23 molecules of NH3

To calculate the mass of ammonia required, we need to use the molar mass of ammonia, which is approximately 17 g/mol:

1 mol of NH3 = 17 g

To convert the number of molecules of NH3 to grams, we need to use Avogadro's number:

1 mol = 6.022 × 10^23 molecules

Therefore, the mass of ammonia required is:

9.09X^23 molecules of NH3 * (1 mol/6.022 × 10^23 molecules) * 17 g/mol

= 2.55 × 10^2 g or 255 grams (rounded to two significant figures)

So, we need 255 grams of ammonia to form 9.09X^23 molecules of water.

To determine the relative activities of X, Y, and Z, you could complete a galvanic cell experiment.

Start by combining a small chip of X and a small chip of Y in a beaker of distilled water, then connect the two chips with a copper wire. Next, place the two dropper bottles containing solutions of [tex]XC^{12}[/tex] (aq) and [tex]ZC^{12}[/tex] (aq) in a separate beaker of distilled water, then connect the two bottles with a copper wire. Finally, connect the two beakers with a copper wire, and measure the voltage created by the circuit. The greater the voltage generated, the greater the activity of the metal, meaning the metal with the highest voltage is the most active.

For more question on galvanic cell click on

https://brainly.com/question/25577710

#SPJ11

Copper vessel weight is 155g, or 0.15 kg. Copper has a heat capacity of 8029 J kg 8 K 1. Heat capacity is calculated as follows: 0.15 kg x 8029 J, or 1204.35. The melting temperature of copper metal is 1083 degrees Celsius, and its specific heat is 0.385 J/g.

To calculate an element's molarity, just use mean atomic mass listed in the standard table. The average atomic mass of a element copper, which appears just on periodic table as 63.55 AMU, can be used to calculate its molar mass.

The number od protons and neutrons in an atom are simply added to determine its atomic mass of that particular atom. Consider an oxygen atom, for instance, which has 8 electrons, 8 protons, and 8 neutrons. To get the atomic structure, just add 8 protons & 8 neutrons.

To know more about metal visit:
https://brainly.com/question/29400906

#SPJ1

The mass of rust that will be produced would be 32,438 g or 32.44 kg.

The molecular weight of Fe2O3 is 159.69 g/mol.

The balanced equation for the rusting of iron is:

4Fe + 3O2 → 2Fe2O3

From the equation, 4 moles of iron react with 3 moles of oxygen to produce 2 moles of Fe2O3.

The weight of iron in 50 lb is:

50 lb = 22.68 kg = 22,680 g

One mole of Fe has a mass of 55.85 g, so 22,680 g of iron is:

22,680 g / 55.85 g/mol = 406.1 mol of Fe

From the balanced equation, 2 moles of Fe2O3 are produced for every 4 moles of Fe that reacts. So, the number of moles of Fe2O3 produced is:

(2/4) x 406.1 mol = 203.1 mol

The mass of Fe2O3 produced is:

203.1 mol x 159.69 g/mol = 32,438 g

Therefore, the weight of rust produced is 32,438 g or 32.44 kg.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

1 tonne of carbon dioxide has been dissolved in a sample of ocean water, which has a pH of 5.76.

The first step is to convert the given mass of carbon dioxide (1 ton) to moles. Since 1 ton = 2000 pounds, and 1 pound = 0.45 kilograms, 1 ton = 907.18 kilograms. To convert this to moles, we need to divide by the molar mass of [tex]CO_2[/tex], which is 44.01 g/mol.

Therefore, the number of moles of [tex]CO_2[/tex] in 1 ton is [tex]\frac{ 907.18}{44.01} = 20.59 moles.[/tex]

Next, we need to convert the given volume of ocean water (1.0x10 gallons) to liters. Since 1 gallon = 3.785 liters, the given volume is [tex]3.785*10^{10}[/tex] liters.

Thus, the number of moles of [tex]CO_2[/tex] per liter of ocean water is [tex]\frac{20.59}{3.785*10^{10}}= 5.45*10^{-10} moles/liter[/tex]

Now, we can calculate the pH of the sample.When carbon dioxide and sea water react, the equilibrium constant is ([tex]1.2*10^{-9}[/tex]) along with the acid dissociation constant (Ka.) for [tex]H_2CO[/tex] is ([tex]4.3*10^{-7}[/tex]). The pH of the sample can be calculated using the Henderson-Hasselbalch equation:

[tex]pH = pK_a + log(\frac{[base]}{[acid]})[/tex]

where [base] is the base's concentration ([tex]CO_2[/tex])and [acid] is the acid's concentration.([tex]H_2CO_3[/tex]). Since we already calculated the concentration of [tex]CO_2[/tex], We only have to determine the concentration of [tex]H_2CO_3[/tex],This is equivalent to the amount of [tex]CO_2[/tex] times the equilibrium constant:

[tex][H_2CO_3] = [CO_2] * K\\ = 5.45*10^{-10} moles/liter *1.2*10^{-9}\\ \\ = 6.54*10^{-19} moles/liter[/tex]

Now, we can plug all the values into the Henderson-Hasselbalch equation to calculate the pH:

[tex]pH = -log(4.3*10^{-7}) + log(\frac{5.45*10^{-10}}{6.54*10^{-19}})\\pH= 5.76[/tex]

Therefore, the pH of the sample of ocean water with 1 ton of carbon dioxide dissolved in it is 5.76.

learn more about carbon dioxide Refer:brainly.com/question/22530423

#SPJ1

Answer:

it has 2 protons 2 electrons and 2 neutrons

These calculations indicate that the process's typical percent yield is roughly 4.06%.

The balanced chemical formula for the reaction of magnesium and oxygen to produce magnesium oxide is 2Mg + O2 2MgO.

Trial 1: Mg mass is equal to (0.404 g) (27.096 g - 26.692 g).

Test 2: Mg mass equals (26.999 g - 26.690 g) = 0.309 g

Calculated yield of MgO in Trial 1 is equal to 2 x (0.404 g Mg) x (1 mol MgO/2 mol Mg) x (40.31 g MgO/1 mol MgO) = 16.28 g MgO.

Calculated yield of MgO in Trial 2 is equal to 2 x (0.309 g Mg) x (1 mol MgO/2 mol Mg) x (40.31 g MgO/1 mol MgO) = 12.44 g MgO.

Trial 1's actual MgO production was 27.352 g - 26.692 g, or 0.66 g MgO.

Trial 2's actual MgO production was equal to 0.507 g MgO (27.197 g - 26.690 g).

Trial 1: The percentage of MgO yield is calculated as (0.66 g MgO/16.28 g MgO) x 100% = 4.05%.

Trial 2: MgO yield as a percentage is (0.507 g MgO/12.44 g MgO) times 100%, or 4.07%.

Learn more about percent yield here:

https://brainly.com/question/2506978

#SPJ4

The molarity of the HCl solution is 1.50 M if 30.0 mL of 0.500 M KOH is required to neutralise 10.0 mL of unknown concentration of HCl.

Knowing the number of moles of solute present in 1 L (103 mL) of solution is known as knowing the molarity. Thus, 0.50 moles of potassium hydroxide are needed for a total neutralisation.

KOH + HCl → KCl + H2O

moles KOH = volume x molarity = 30.0 mL x 0.500 mol/L = 0.0150 mol

HCl molarity is calculated as moles / volume HCl.

We are given the volume of HCl as 10.0 mL, which is equivalent to 0.0100 L.

moles HCl = moles KOH = 0.0150 mol

molarity HCl = moles HCl / volume HCl = 0.0150 mol / 0.0100 L = 1.50 M

To know more about molarity  visit:-

https://brainly.com/question/8732513

#SPJ1

Answer: D.

Explanation: it is an opportunity within the Earth's crust.

Temperature and thermal energy are intrinsic properties that do not depend on the amount of substance you have. Both of these properties depend only on the state of the system and the conditions it is subjected to.

Let's understand this in detail:

1. Temperature measures the average kinetic energy of particles in a system. The temperature of a substance is determined by measuring how much energy is required to raise its temperature by a certain amount.

2. Thermal energy is the total energy of the particles in a system, including both kinetic and potential energy. The amount of thermal energy a substance has depends on the temperature and the number of particles in the system. It is an extrinsic property of a system that depends on the amount of substance present. However, it's worth noting that thermal energy can also be expressed on a per-molecule or per-atom basis as internal energy, which is an intrinsic property. Internal energy is the total energy stored in the particles of a system and is independent of the amount of substance present.

Learn more about intrinsic properties: Would extrinsic or intrinsic properties be more useful in identifying a substance? Why? https://brainly.com/question/28528346

#SPJ11

The fοrce that keeps a satellite in Earth’s οrbit is directed always away frοm the center οf Earth, sο, οptiοn (b) is cοrrect.

Distance is an οbject's οverall mοvement, regardless οf directiοn. Distance refers tο the length οf an οbject's real rοute as a whοle. The displacement οf an οbject between twο pοints is defined as the straight line distance (shοrtest distance), measured frοm οne pοsitiοn tο the οther.

A bοdy can change its state οf rest οr mοtiοn when an external fοrce acts οn it. It is directed and has a magnitude.

Therefοre, fοrce that keeps a satellite in Earth’s οrbit is directed always away frοm the center οf Earth, sο, οptiοn (b) is cοrrect.

Learn more about distance from the given link.

https://brainly.com/question/26550516

#SPJ1

The RK of methyl orange is 3.5, as it changes color from red to yellow at a pH of 3, and has its most intense color (yellow) at pH 6.

Methyl is an organic compound with a formula of CH3, which is a single carbon atom bonded to three hydrogen atoms. It is a type of hydrocarbon and is the simplest of all alkyl compounds. Methyl is a versatile molecule that can be found in a variety of compounds, including pharmaceuticals, solvents, fragrances, and food additives. It is also used in the production of plastics, rubber, dyes, and other synthetic materials. Additionally, methyl is a key component of natural gas, oil, and coal, and can also be produced from biomass. In the body, methyl is used for a variety of biological processes, such as the metabolism of proteins, carbohydrates, and fats.

To learn more about methyl
https://brainly.com/question/28543544
#SPJ1

The intermolecular bonds of the solid state are being broken as particles vibrate faster. The solid would be converted into liquid in the process.

Fusion is the process of melting a solid into a liquid state, which occurs when heat energy is applied to the solid. The heat energy causes the molecules in the solid to vibrate more rapidly, which eventually leads to the breaking of the intermolecular bonds that hold the solid together. Once these bonds are broken, the solid turns into a liquid.

The solid is heated to a temperature at which the intermolecular bonds begin to break. The temperature at which this occurs depends on the material and its specific properties.

Learn more about fusion:https://brainly.com/question/14053504

#SPJ1

3.65 x [tex]10^{14}[/tex] Hz of electromagnetic radiation is needed to promote an electron in a Bohr hydrogen atom from n = 2 to n = 4.

The following equation can be used to determine the frequency of electromagnetic radiation necessary to advance an electron from one energy level to another:

ΔE = hf

ΔE = -Rh[(1/n2²) - (1/n1²)]

When we solve for E using the value of Rh as a substitute, we obtain:

ΔE = -2.42 x [tex]10^{-19}[/tex] J

The following results are obtained when we enter the value of E and Planck's constant into the equation for frequency:

3.65 x [tex]10^{14}[/tex] Hz for f = E/h = (-2.42 x [tex]10^{-19}[/tex] J)/(6.626 x [tex]10^{-14}[/tex] J s)

To learn more frequency of electromagnetic wave visit:

brainly.com/question/14320803

#SPJ1

In this reaction, 20 liters of hydrogen gas must combine with 6.67 litres of nitrogen gas.

According to the reaction's chemical equation, 1 mole of nitrogen (N2) interacts with 3 moles of hydrogen (H2) to create 2 moles of ammonia (NH3).

This indicates that the reaction's nitrogen:hydrogen ratio is 1:3.

We may set up a percentage using this ratio to calculate the quantity of nitrogen gas required to react with 20 litres of hydrogen gas:

1/3 = x/20

where x is the number of liters of nitrogen gas needed.

Solving for x, we get:

x = (1/3) × 20 = 6.67 liters

Methane, also known as natural gas, can be replaced with hydrogen, a clean fuel. It is the most prevalent chemical element and is thought to make about 75% of the universe's mass. Many hydrogen atoms can be found in water, plants, animals, and, of course, people here on earth.

To know more about Nitrogen Gas

https://brainly.com/question/11426882

#SPJ1

in H2C=CCl2: σ bonds = 3, π bonds = 1, in HOOC−COOH: π bonds = 0, σ bonds = 14, FHC=C=CHF: σ bonds= 7, π bonds = 2.

H2C=CCl2:

Number of σ bonds: 3 (2 C-H bonds and 1 C-Cl bond)

Number of π bonds: 1 (C=C double bond)

HOOC−COOH:

Number of σ bonds: 14 (8 C-H bonds, 4 C-O bonds, and 2 O-H bonds)

Number of π bonds: 0

FHC=C=CHF:

Number of σ bonds: 7 (4 C-H bonds, 2 C-F bonds, and 1 C-C bond)

Number of π bonds: 2 (2 C=C double bonds in the carbon ring)

In the molecule H2C=CCl2, there are three sigma bonds and one pi bond. The sigma bonds are formed due to the overlap of orbitals between the carbon atoms and hydrogen and chlorine atoms. The pi bond is formed by the sideways overlap of unhybridized p orbitals on the two carbon atoms in the double bond.

In the molecule HOOC−COOH, there are 14 sigma bonds and no pi bonds. The sigma bonds are formed due to the overlap of orbitals between the carbon, hydrogen, and oxygen atoms. This molecule is an example of a carboxylic acid, and the two carboxyl functional groups are connected by a carbon-carbon single bond.

learn more about Sigma bond here:

https://brainly.com/question/30000552

#SPJ4

Answer: 197.26 g Na2S2O3

Explanation:

64.3/103 (molar mass of NaBr)  X 2 moles Na2S2O3 X 158 (molar mass of Na2S2O3.

The air is cooled by the currents, which causes it to rise and warm when it crosses land. This warming causes the air to hydrate, then afterward precipitates as the air passes deeper inland.

The impacts of grasslands hitting the sea are typically astounding. Namibia and or the Western Sahara constitute the place where the African desert meets north Mediterranean Sea. Moreover, the Sahara extends eastward to the Red Sea. The Atacama Desert and the Pacific Ocean meet strikingly in northern Chile.

Cold ocean currents that move near the shore drive coastal deserts to emerge. The air is stabilised by the chilly winds, which also prevent cloud development. It produces a significant amount of fog. A dense blanket of minute water droplets which are too light to disperse as rain makes up a fog.

To know more about hydrate visit:

https://brainly.com/question/11202174

#SPJ1

The properties of metals and nonmetals are different, and these differences can be used to differentiate between them. Here are some characteristics that can be used to identify whether a particle is a metal or a nonmetal:

Physical appearance: Generally, metals are shiny, lustrous, and have a metallic luster. Nonmetals, on the other hand, are typically dull, lack luster, and are not shiny.

Conductivity: Metals are good conductors of heat and electricity, while nonmetals are poor conductors.

Malleability and ductility: Metals are generally malleable and ductile, meaning they can be easily shaped or drawn into wires. Nonmetals, however, are brittle and not malleable or ductile.

Chemical properties: Metals tend to form positive ions, while nonmetals tend to form negative ions.

By examining these properties, it is possible to differentiate between metals and nonmetals.

To learn more about Malleability refer to:

brainly.com/question/1349130

#SPJ4

Two main types of elements with different characteristics are metals and nonmetals. By looking at a particle's physical and chemical characteristics, one may tell if it is a metal or nonmetal.

The following characteristics of metals and nonmetals can be used to distinguish them: Physical Characteristics Nonmetals are drab and lack a metallic shine, whereas metals are often brilliant and have one. Metals can usually be easily formed into various shapes because they are malleable and ductile. Nonmetals have a tendency to break readily and are fragile. Nonmetals are weak conductors of heat and electricity compared to metals. Except for mercury, metals are typically solid at room temperature. At room temperature, nonmetals might be solid, liquid, or gas.

learn more about metals  here:

https://brainly.com/question/29404080

#SPJ4

The molarity of a solution with 952 grams of ammonium carbonate dissolved to make 1750 ml of solution is: 0.54 mol/L.

The molarity of a solution can be calculated by dividing the amount of solute (in this case ammonium carbonate) by the volume of the solution. In this case, 952 grams of ammonium carbonate are dissolved in 1750 mL of solution. Therefore, the molarity of the solution can be calculated as follows:

Molarity = (952 g ammonium carbonate) / (1750 mL solution) = 0.54 mol/L

To calculate the molarity, first, we need to calculate the moles of ammonium carbonate. We can do this using the molar mass of ammonium carbonate, which is 53.49 g/mol. We divide the mass of ammonium carbonate by its molar mass to get the number of moles:

(952 g ammonium carbonate) / (53.49 g/mol) = 17.77 mol

Then, we divide this number by the volume of the solution (in liters):

(17.77 mol) / (1750 mL/1000 mL/L) = 0.54 mol/L

Therefore, the molarity of the solution is 0.54 mol/L.

To know more about molarity refer here:

https://brainly.com/question/16727614#

#SPJ11

three changes in the possible distributions of six gaseous particles within three interconnected boxes is Change 1 and Change 3 have the particles more concentrated in one box, which creates less disorder and therefore a lower entropy. So, the correct answer is Change 2.

Three changes in the possible distributions of six gaseous particles within three interconnected boxes. Part a which change has a positive δs are :

Change 1: Six particles in one box, zero particles in the other two boxes
Change 2: Two particles in each box
Change 3: Four particles in one box, one particle in each of the other two boxes
The change with a positive δS is Change 2. This is because entropy, represented by δS, is a measure of the disorder or randomness of a system. In Change 2, the particles are more evenly distributed among the three boxes, which creates more disorder and therefore a higher entropy.

For more question on gaseous particles click on

https://brainly.com/question/24719118

#SPJ11

PROBABLE QUESTION WOULD BE

Consider these three changes in the possible distributions of six gaseous particles within three interconnected boxes. Part a which change has a positive δs (CHECK IMAGE)

The diagram represents a nuclear fission reaction where a Uranium-235 nucleus absorbs a neutron, becomes unstable and splits into two fragments releasing energy and neutrons.

Nuclear fission is the process of splitting an atomic nucleus into two or more smaller nuclei with the release of energy, while nuclear fusion is the process of combining two or more atomic nuclei into a larger nucleus with the release of energy.

In a nuclear fission reaction, energy is released due to the conversion of a small amount of mass into a large amount of energy, in accordance with Einstein's famous equation E=mc^2. The release of energy occurs when the Uranium-235 nucleus splits into two fragments, releasing neutrons and gamma radiation in the process.

Learn more about nuclear fission here:

https://brainly.com/question/29141330

#SPJ1

Answer:

Because magnesium cannot displace sodium from solutions.

The pressure of a gas is directly proportional to its volume, according to Boyle's Law. this pressure is less than the maximum pressure that the can can withstand (3,800 kPa), the can will not burst.

Therefore, we can use the following equation to find the pressure of the gas in the can after it is crushed: P1V1 = P2V2 where P1 and V1 are the initial pressure and volume of the gas, and P2 and V2 are the final pressure and volume of the gas, respectively. Given that the initial volume (V1) of the gas in the can is 235 mL and the initial pressure (P1) is 110 kPa, we can substitute these values into the equation P1V1 = P2V2 110 kPa × 235 mL = P2 × 8.5 mL Solving for P2, we get: P2 = (110 kPa × 235 mL) / 8.5 mL P2 = 3,027 kPa Therefore, the pressure of the gas in the can after it is crushed to a volume of 8.5 mL is 3,027 kPa. Since this pressure is less than the maximum pressure that the can can withstand (3,800 kPa), the can will not burst.

learn more about pressure at :

https://brainly.com/question/12971272

#SPJ4

The activation energy is 101, 800J/mol

Activation energy is the minimum amount of energy required to start a chemical reaction by breaking the bonds of the reactant molecules. In other words, it is the energy barrier that must be overcome before a chemical reaction can occur.

Given that;

[tex]ln(k2/k1) = -Ea/R(1/T2 - 1/T1)\\ln(5 * 10^-4/4.9 * 10^-3) = -Ea/8.314(1/318 - 1/336)\\-2.28 = -2 * 10^-5 Ea\\Ea = 2.28/2 * 10^-5\\Ea = 101, 800J/mol[/tex]

Learn more about activation energy:https://brainly.com/question/28384644

#SPJ1

A sea breeze and a land breeze are both caused by differences in temperature and pressure between the land and sea.

During the day, the land heats up more quickly than the water, so the air above the land becomes warmer and less dense than the air above the sea. This causes a low-pressure zone to form over the land and a high-pressure zone to form over the sea. The cooler, denser air over the sea then moves inland to replace the rising warm air, creating a sea breeze.

During the night, the opposite occurs. The land cools more quickly than the sea, so the air above the land becomes cooler and denser than the air above the sea. This causes a high-pressure zone to form over the land and a low-pressure zone to form over the sea. The cooler, denser air over the land then moves offshore to replace the rising warm air, creating a land breeze.

To know more about temperature visit:-

brainly.com/question/29072206

#SPJ1

The capacity of a substance to rotate the polarization plane of an incident light beam.

Chiral molecules are said to be optically active because they can spin the plane of polarisation in a different way by interacting with the electric field in a different way. Generally speaking, optical isomers are molecules that rotate light in different directions.

A polarimeter is used to measure optical activity, which is a chiral molecule's capacity to rotate the plane of plane-polarized light. A grouping of these molecules' optical activity is a macroscopic characteristic that results from their interactions with light.

To know more about light beam visit:-

https://brainly.com/question/22268346

#SPJ1

No, cyclohexane would not behave similarly to water toward the charged rod.

Let's understand this in detail:

1. The primary reason for this difference is the polarity of the two substances. Water is a polar molecule, while cyclohexane is non-polar.

2. Polarity plays a crucial role in interacting with the charged rod. Polar molecules, like water, have a separation of charges due to the difference in electronegativity between their constituent atoms, which leads to the formation of a dipole moment.

3. This dipole moment allows water molecules to align themselves and interact with the charged rod, causing them to be attracted or repelled based on the charge of the rod.

4. Contrastingly, cyclohexane, a non-polar molecule, has an even distribution of electrons and no dipole moment. Therefore, it does not have a charge separation and cannot align or interact with the charged rod in the same way as water molecules.

5. This lack of interaction with the charged rod means that cyclohexane will not behave similarly to water in this scenario.

Learn more about polarity: Polarity is related to? https://brainly.com/question/29300412

#SPJ11

Before scientists publish their data and conclusions in scientific journals, they ask other experts in the same field to review the work and ensure that the results and conclusions are valid. This is known as Peer review.

Research project outcomes are evaluated by the scientific and medical communities after publication in peer-reviewed journals. It also offers guidelines so that additional researchers might carry out the experiment or expand on it to validate the findings.

Before a paper is published, its quality is evaluated through a process called peer review. To assist editors in deciding whether to publish a manuscript in their journal, independent researchers in the relevant field evaluate submitted manuscripts for originality, validity, and significance.

To know more about scientists visit-

https://brainly.com/question/17319855

#SPJ1