i need help, for physics

I Need Help, For Physics

Answers

Answer 1
There are 2.2 pounds to 1.0 kilogram. So 1982 pounds = 901 Kg
Weight = 901 x 9.8 =8830 N

Related Questions

A person walks 2.00 m east, then turns and goes 4.00 m west, then turns and goes back 1.00 m east. what is the distance and displacement

Answers

Explanation:

Let east = E, and, west = opposite to east = - E.

Here, displacement:

=> 2m east + 4m west + 1m east

=> 2E + 4(-E) + 1E

=> 2E - 4E + 1E

=> - 1E

=> 1(-E)

=> 1m west

And, distance,

=> 2m + 4m + 1m = 7m

The distance of a person is 7 m and the displacement of the person is 1m west.

To find the distance and displacement, the given values are,

A person walks 2.00 m east, then turns and goes 4.00 m west, then turns and goes back 1.00 m east.

What is the distance and the displacement?

Displacement:

The displacement is shortest distance between initial and final position or we can say it is the straight line distance between initial and final position.If object moves in a straight line path without any turn then the path length and the displacement is always same.

Distance:

The distance is the total path length of the object while it will move from initial to final position.If the object move on curved path then displacement is smaller than the distance moved by the object.

Let us consider East = E and west = opposite to east = - E.

Calculating the displacement:

= 2m east + 4m west + 1m east

= 2E + 4(-E) + 1E

= 2E - 4E + 1E

= - 1E

= 1(-E)

= 1m west.

The displacement is 1m west.

Now calculating the distance,

= 2m + 4m + 1m

= 7m

The distance is 7m.

Thus, the displacement and the distance is found as 1 m west and 7m.

Learn more about distance and displacement,

https://brainly.com/question/3243551

#SPJ6

The horizontal surface on which the block slides is frictionless. The speed of the block before it touches the spring is 6.0 m/s. How fast is the block moving at the instant the spring has been compressed 15 cm

Answers

Answer:

The final speed of the block moving at the instant the spring has been compressed is approximately 3.674 meters per second.

Explanation:

The spring constant is 2000 newtons per meter. Let consider the spring-block system, from Principle of Energy Conservation we can represent it by the following model:

[tex]U_{k,1}+K_{1} = U_{k,2}+K_{2}[/tex]

[tex]K_{2} = K_{1}+(U_{k,1}-U_{k,2})[/tex] (Eq. 1)

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final kinetic energies of the block, measured in joules.

[tex]U_{k,1}[/tex], [tex]U_{k,2}[/tex] - Initial and final elastic potential energy, measured in joules.

And we expand the equation above by definitions of elastic potential energy and kinetic energy:

[tex]\frac{1}{2}\cdot m \cdot v_{2}^{2} = \frac{1}{2}\cdot m\cdot v_{1}^{2} + \frac{1}{2}\cdot k\cdot (x_{1}^{2}-x_{2}^{2})[/tex]

[tex]v_{2} = \sqrt{v_{1}^{2}+\frac{k}{m}\cdot (x_{1}^{2}-x_{2}^{2}) }[/tex] (Eq. 1b)

Where:

[tex]m[/tex] - Mass of the block, measured in kilograms.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final velocities of the block, measured in meters per second.

[tex]x_{1}[/tex], [tex]x_{2}[/tex] - Initial and final positions of spring, measured in meters.

If we know that [tex]v_{1} = 6\,\frac{m}{s}[/tex], [tex]k = 2000\,\frac{N}{m}[/tex], [tex]m = 2\,kg[/tex], [tex]x_{1} = 0\,m[/tex] and [tex]x_{2} = 0.15\,m[/tex], the final speed of the block moving at the instant the spring has been compressed is:

[tex]v_{2} = \sqrt{\left(6\,\frac{m}{s} \right)^{2}+\left(\frac{2000\,\frac{N}{m} }{2\,kg} \right)\cdot [(0\,m)^{2}-(0.15\,m)^{2}]}[/tex]

[tex]v_{2}\approx 3.674\,\frac{m}{s}[/tex]

The final speed of the block moving at the instant the spring has been compressed is approximately 3.674 meters per second.

Derivation 1.2 showed how to calculate the work of reversible, isothermal expansion of a perfect gas. Suppose that the expansion is reversible but not isothermal and that the temperature decreases as the expansion proceeds. (a) Find an expression

Answers

Answer:

(a) The work done by the gas on the surroundings is, 17537.016 J

(b) The entropy change of the gas is, 73.0709 J/K

(c) The entropy change of the gas is equal to zero.

Explanation:

(a) The expression used for work done in reversible isothermal expansion will be,

where,

w = work done = ?

n = number of moles of gas  = 4 mole

R = gas constant = 8.314 J/mole K

T = temperature of gas  = 240 K

= initial volume of gas  =  

= final volume of gas  =  

Now put all the given values in the above formula, we get:

The work done by the gas on the surroundings is, 17537.016 J

(b) Now we have to calculate the entropy change of the gas.

As per first law of thermodynamic,

where,

= internal energy

q = heat

w = work done

As we know that, the term internal energy is the depend on the temperature and the process is isothermal that means at constant temperature.

So, at constant temperature the internal energy is equal to zero.

Thus, w = q = 17537.016 J

Formula used for entropy change:

The entropy change of the gas is, 73.0709 J/K

(c) Now we have to calculate the entropy change of the gas when the expansion is reversible and adiabatic instead of isothermal.

As we know that, in adiabatic process there is no heat exchange between the system and surroundings. That means, q = constant = 0

So, from this we conclude that the entropy change of the gas must also be equal to zero.

Explanation:

A person has a mass of 1000g and an acceleration of 20 m/s/s. What is the force on the person

Answers

Answer:

20000

Explanation:

Newtons Second law states that the force acting on an object is equal to its mass times its acceleration, f=ma. To solve for force, plug in your values for m and a, and then solve. f = (1000)*(20) = 20000

7N
6
→ 2N
Net Force:
Determine the net force acting on the object.

Answers

Answer:

When a force is applied to the body, not only is the applied force acting, there are many other forces like gravitational force Fg, frictional force Ff and the normal force that balances the other force. Therefore, the net force formula is given by, FNet = Fa + Fg + Ff + FN.

Explanation:

plzzz helppp
You are pushing a box North in the hallway, at 20n, and a friend gets in front of the box and goes in the opposite direction, at 30n. What direction is the box going at? How much force does the box have going in that direction?​

Answers

Answer:

the box is going south at 10n

Explanation:

A designer is creating an obstacle for an obstacle course where a person starts on a moveable platform of height H from the ground. The person grabs a rope of length L and swings downward. At the instant the rope is vertical, the person lets go of the rope and attempts to reach the far side of a water-filled moat. The left side of the moat is directly below the position where the person will let go of the rope. The designer runs several tests in which the rope has different lengths and moves the platform such that the rope is always initially horizontal. The designer notices that the person cannot land on the other side if the length L is very short. The designer also notices that the person also cannot land on the other side if the length L is very close to the height H.

Assume the size of the person is much smaller than the lengths L and H. Let D represent the horizontal distance from below the release point to where the person lands.

Required:
a. Why does the person land in the moat if the rope's length is very short?
b. Why does the person land in the moat if the length is nearly the same as the height of the platform?

Answers

Answer:

* when L → H    chord too long

in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross

* when L → 0 very short string

         the speed of the platform is very small, so we do not have the minimum required value

        vox = √ (g / (2 (H)) D

Explanation:

For this exercise we are going to solve it using conservation of energy to find the velocity of the body and the launch of projectiles to find the velocity to cross the well.

Let's start with the projectile launch

as the body leaves the vertical its velocity must be horizontal

         x = v₀ₓ t

         y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²

when reaching the ground its height of zero (y = 0) and the initial vertical velocity is zero

         t = √ 2 y₀ / g

we substitute

        x = vox √2y₀ / g

        v₀ₓ = √(g / 2y₀)     x

In the exercise, it tells us that the width of the well is D (x = D) and the initial height is the height of the platform minus the length of the rope (I = H - L)

       v₀ₓ = √(g /(2 (H -L))    D

this is the minimum speed to cross the well.

Now let's use conservation of energy

starting point. On the platform

      [tex]Em_{o}[/tex] = U = m g H

final point. At the bottom of the swing

      Em_{f} = K + U = 1 / 2m v² + m g (H -L)

as there is no friction the mechanical energy is conserved

        Em_{o} = Em_{f}

       m g H = 1 / 2m v² + m g (H -L)

        v = √ (2gL)

let's write our two equations

the minimum speed to cross the well

       v₀ₓ = √ (g /(2 (H -L))    D

the speed at the bottom of the oscillatory motion

       v = √ (2g L)

we analyze the extreme cases

* when L → H    chord too long

in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross

* when L → 0 very short string

         the speed of the platform is very small, so we do not have the minimum required value

        vox = √ (g / (2 (H)) D

From this analysis we see that there is a range of lengths that allows us to have the necessary speeds to cross the well

      V₀ₓ = v

      g / (2 (H -L) D² = 2g L

       4 L (H- L) = D²

        4 H L - 4 L2 - D² = 0

        L² - H L - D² / 4 = 0

let's solve the quadratic equation

      L = [H ± √ (H2-D2)] / 2

we assume that H> D

       L = ½ H [1 + - RA (1 - (D / H) 2)]

The two values ​​of La give the range of values ​​for which the two speeds are equal

A) The person lands in the moat if the rope's length is very short because :

The speed of the platform is less than the required minimum speed

B) The person lands in the moat if the rope length is similar to the height of the platform because :

The speed required to cross the moat approaches infinity

Following the assumptions;

size of the person is much smaller than L and H

D = horizontal distance

The conditions that will cause the person to land on the moatThe person will land in the moat when the rope's length is very short because as the rope reduces in length the speed reduces as well such that the speed of the platform goes below the required minimum speed which will enable the person cross over.  while As the magnitude of the length tends towards the same magnitude of the height the speed required to cross the moat increases towards infinity and this speed cannot be attained by the person hence he will land in the moat.

Hence we can conclude that The person lands in the moat if the rope's length is very short because The speed of the platform is less than the required minimum speed  and  The person lands in the moat if the rope length is similar to the height of the platform because,the speed required to cross the moat approaches infinity.

Learn more about obstacle course : https://brainly.com/question/241926

Two particles are separated by 0.38 m and have charges of -6.25x 10 C and 2.91 x 10 C. Use Coulomb's law to predict the force between the particles if the distance is doubled. The equation for Coulomb's law is Fe = g, and the constant, k, equals 9.00 x 10° Nm/C A. -1.13 x 10-6 N OB. 1.13x 106N O C. 2.83 x 10-7 N OD.-2.83x 10N sUBMIT​

Answers

Answer:

I do not understand what you are asking

Logan is a runner he in 60 seconds he can run 360 m what speed did he travel at

Answers

Answer:

hhhhhhhh

Explanation:

which two types of information are found in an elements box in the periodic table

Answers

Answer:

Each box represents an element and contains its atomic number, symbol, average atomic mass, and (sometimes) name.

Explanation:

Answer:

An element's period and group

The coefficient of static friction between m1 and the horizontal surface is 0.50, and the coefficient of kinetic friction is 0.30. (a) If the system is released from rest, what will its acceleration be

Answers

This question is incomplete

Complete Question

m1 is 10kg, m2 is 4.0kg. The coefficient of static friction between m1 and the horizontal surface is 0.50. and the Coefficient of kinetic friction is 0.30.

a) if the system is released from rest what will be its acceleration

Answer:

0.7 m/s²

Explanation:

The coefficient of static friction between m1 and the horizontal surface is 0.50. and the coefficient of kinetic friction is 0.30.

(a) if the system is released from rest what will be its acceleration

g = acceleration due to gravity = 9.81 m/s²

Coefficient of Kinetic Friction = μk = 0.30

m1 = 10kg

m2 = 4.0kg

The formula to solve question a is given as:

a = acceleration at rest

m2g- μk m1g = (m1+ m2) a

Making a the subject of the formula:

a = (m2g- μk×m1g )/(m1+ m2)

a = [(4.0 kg × 9.81m/s²) – (0.30 ×9.81 × 10) ]/(10+4)

a = 0.7 m/s²

It took 50 joules to push a chair 5 meters across the floor. With what force was the chair pushed?

Answers

Answer:

The chair was pushed with 10 N.

Explanation:

The chair was pushed with 50 Joules.  

Work = Force * Distance

50 J = F * 5m  

F = 50 / 5 = 10N  

The chair was pushed with 10 N.

The chair was pushed with 10 N force.

What is Work done?

Work is defined as the measure of energy transfer that occurs when an object is moved over a distance by an external force, at least part of which is applied in the direction of displacement.

If the force is constant then work can be calculated by multiplying the length of the path by the component of the force acting along the path, which is expressed mathematically as work W equal to the force f over a distance d, or W = fd.

So, for above given information,

Work done= 50 joules

Distance covered by the chair = 5m

Then, Force= W/d

=50/5= 10N

Thus, the chair was pushed with 10 N force.

Learn more about Work done, here:

https://brainly.com/question/13662169

#SPJ2

You have made a simple circuit with one bulb. If you wanted to add an
extra bulb without the first bulb dimming. What would you need to
design?

A. A series circuit

B. A complex circuit

C. A parallel circuit

D. An incomplete circuit​

Answers

Answer:

[tex]A. \: A \: series \: circuit[/tex]

Explanation:

♨Rage♨

Answer:

  C.  A parallel circuit

Explanation:

Adding a bulb in parallel with the existing bulb will apply the same voltage to both bulbs. They will light equally bright.

You would design a parallel circuit.

_____

In a series circuit the same current would flow in both bulbs, but that current would be at half the original current level. Both bulbs would be dimmer than the first bulb was.

It is difficult to create a "complex" circuit with only two components. An "incomplete" circuit would result in no light at all.

Silly Goose falls 1.0 m to the floor. How long does the fall take

Answers

Answer:You need to give more explanation sorry

Explanation:

Answer:

4.20 seconds

Explanation:

Supposing that silly goose weighs 69 pounds, we need to start on the math.

Simple maths, truly and really. 69/1=69, of course.

Therefore it will take 4.20 seconds for silly goose to hit the ground. if he is going to be a silly goose though, he can just go in the pond, instead of wasting his time.

Find the linear velocity of a point moving with uniform circular motion, if the point covers a distance s in the given amount of time t. s

Answers

Answer:

The linear velocity is represented by the following expression: [tex]v = \frac{s}{t}[/tex]

Explanation:

From Rotation Physics we know that linear velocity of a point moving with uniform circular motion is:

[tex]v = r\cdot \omega[/tex] (Eq. 1)

Where:

[tex]r[/tex] - Radius of rotation of the particle, measured in meters.

[tex]\omega[/tex] - Angular velocity, measured in radians per second.

[tex]v[/tex] - Linear velocity of the point, measured in meters per second.

But we know that angular velocity is also equal to:

[tex]\omega = \frac{\theta}{t}[/tex] (Eq. 2)

Where:

[tex]\theta[/tex] - Angular displacement, measured in radians.

[tex]t[/tex] - Time, measured in seconds.

By applying (Eq. 2) in (Eq. 1) we get that:

[tex]v = \frac{r\cdot \theta}{t}[/tex] (Eq. 3)

From Geometry we must remember that circular arc ([tex]s[/tex]), measured in meters, is represented by:

[tex]s = r\cdot \theta[/tex]

[tex]v = \frac{s}{t}[/tex]

The linear velocity is represented by the following expression: [tex]v = \frac{s}{t}[/tex]

A .05 kg rubber ball is dropped and hits the floor with an initial velocity of 10 m/s. It rebounds away from the floor with a final speed of 7 m/s after being in contact with the floor for .01 seconds. Find the magnitude of the force exerted by the floor on the rubber ball.

Answers

Answer:the answer is 3

Explanation:

am I right? be honest

Answers

Answer:

I chose c because it is the greater slope at point c

If 0.5 kg of this material is used in a transformer core, how long would it have to operate at a frequency of 60 cps to heat up 1

Answers

Answer:

Hello your question is incomplete attached below is the complete question

answer : 49 seconds

Explanation:

considering only Hysteresis loss

we have to calculate the Area affected/under the  Hysteresis loss

= volume * area

= 4 * ( 1.5 * 20 ) =  120 tesla. A/m

next we calculate the volume of the material

= mass of material / density

= 500 grams / 7.9 g/cm^3  = 6.33 * 10^-5 m^3

next we calculate the heat lost per cycle

= 6.33 * 10^-5 m^3 * 120 = 0.007596 joules

The total heat required to raise  temperature by 1°c

= Cp * ΔT * n

= 3R * n * ΔT  = 3(8.314) * 8.95 * 1  = 223.23 Joules

where n = number of moles = 500grams / 55.85 = 8.95moles

ΔT = 1

Therefore the time required to have to operate at a frequency of 60 cps

= Total heat required  / heat lost per cycle

=( 223.23 / 0.007596 ) 60 cps

= 489.796 seconds ≈  49 seconds

Research has shown that this type of interview is the most effective in predicting later job
performance.

Answers

Answer:

Situational Interview

Explanation:

A situational interview is about as close to the real job as it gets. During this type of interview, candidates may be presented with a visual or audio simulation of a scenario and asked to respond to it. They are asked to analyze a problem and profer suggestions on how they would handle it.

If the candidate has solved similar problems in the past, it will come to the fore.

If they haven't then the best outcome is that it will tell the interviewers how well the candidate is able to solve similar problems.

An example of a Situational Interview question is this:

How would you handle an angry customer who for no justifiable reason has decided to create a problematic scene to disrupt the business?

Because Situational Interviews are about behavioral responses (present, past, and future), they are powerful tools in determining or predicting future job performance. An interviewing technique that is developed using this methodology is called the S.T.A.R.

This is an acronym for Situation, Task, Action, Result.

Situation: the candidate is asked to present a challenging situation that occurred recently. This tests what the candidate sees as a challenging situation.

Task: The candidate based on the situation is asked to identify what they need to do to remedy the problem. This tells the interviewer(s) whether or not the candidate can think up a solution for the problem.

Action: Here they define the actual steps taken to resolve the problem

Result: The candidate against the above is required to give the result gotten

Action and Result tell the interviewer the quality of the candidate's ability to follow through and achieve the intended results. This also judges the quality of execution in terms of cost and time. The candidate with the lowest cost and time and the highest quality of outcome is considered the best.

Cheers

A soccer ball accelerates from rest and rolls 6.5m down a hill in 3.1 s. It then bumps into a tree. What is the speed of the ball just before it hits the tree.

Answers

Answer:

2.096m/s

Explanation:

The speed of this soccer ball can be calculated using the formula;

Speed = distance/time

According to this question, the distance of the ball before it hits the tree is 6.5m, the time it takes is 3.1s, hence;

Speed = 6.5/3.1

Speed of the ball = 2.096m/s

Therefore, the speed of the ball before hitting the tree is 2.096m/s

A dog has a mass of 60kg and an acceleration of 2m/s/s. What is the force of the dog?

Answers

The force 120 Newton’s

Examine the diagram below.
Which of the above objects is moving the fastest?
A.
All 3 objects are moving at the same speed.
B. B
C. C
D. A

Answers

Answer:

Correct choice: D. Object A is the fastest

Explanation:

In a distance vs time graph, the distance is plotted vertically, and the time is plotted horizontally.

The diagram shows three graphs of objects A, B, and C.

The graph of A shows the object traveled 12 meters in 3 seconds, for a speed of 12/3= 4 m/s.

The graph of B shows the object traveled 8 meters in 4 seconds for a speed of 8/4=2 m/s.

Finally, the object C travels 4 meters in 4 seconds, for a speed of 4/4= 1 m/s

Thus, the fastest object is A.

21. A toy car starts from rest and begins to accelerate at 11.0 m/s2. What is the toy
car's final velocity after 6.0 seconds?

Answers

Answer:

Explanation:

Given parameters:

Initial velocity = 0

Acceleration = 11m/s²

Time  = 6s

Unknown:

Final velocity  = ?

Solution:

 From the given parameters, we use one of the appropriate equations of motion to solve this problem.

     V = U + at

V is the final velocity

U is the initial velocity

a is the acceleration due to gravity

t is the time taken

Input the parameters and solve;

     V  = 0 + 11 x6

     V  = 66m/s

The final velocity is 66m/s

QUESTION 2

At the end of an investigation, what should be done if the results do NOT support the hypothesis?

O A Repeat your investigation to ensure your results are accurate and then modify your hypothesis if necessary.

OB. Repeat your investigation over and over again until you get the results that will support your original hypothes

O C. Check your measurement tools to ensure they are working.

OD. Change the topic of your investigation to one that will yield results that support a hypothesis.

Answers

Answer:

A. Repeat your investigation to ensure your results are accurate and then modify your hypothesis if necessary.

Explanation:

Having results that do not support the hypothesis is a common occurrence.

Hypotheses always depend on the data and experiment. If at the end of an investigation the results do not support the hypothesis, the investigation should be be repeated to further confirm this discovery.

And if there is still no correlation, then the hypothesis is not a reasonable explanation for the investigation and should be modified or rejected if necessary.

Which two types of energy does a book have as it falls to the floor

Answers

Answer:

kinetic and potential energy

Explanation:

Magnets are usually made up of which material

A. plastic

B. iron ore

C. copper

D. gold​

Answers

Answer:

B. iron ore

Explanation:

Hope this helps

plz mark as brainliest!!!!!!

An object is rolled at 12 m/s down a table. It stops
after 15s. What was its acceleration?
Variables:
Equation and Solve:

Answers

Answer:

We are given:

initial velocity (u) = 12 m/s

final velocity (v) = 0 m/s

time taken (t) = 15 seconds

acceleration (a) = a m/s²

Solving for acceleration:

from the first equation of motion

v = u + at

replacing the variables

0 = 12 + (a)(15)

0 = 15a + 12

a = -12 / 15

a = -4 / 5 m/s²

when hydrogen shares electrons with oxygen the outermost shell of the hydrogen atoms are full with how many electrons? and oxygens valence shell is full with how many electrons? because the valence shells of these atoms are full,the atoms are stable.​

Answers

Answer:

2 and 8

Explanation:

please mark me brainiest I would really appreciate it.

1. What is Ohm"s law?
2. If you placed a negatively charged hairbrush near your hair, what charge would your hair be?
3. You must change a lightbulb and the new lightbulb has a larger resistance. If the voltage of the battery does not change, what happens to the current going through the flashlight?
HELLPPPP

Answers

1. Ohm's law shows the relationship between:

voltagecurrentresistance

Formula: voltage = current x resistance

2. The negative charge on the hairbrush will induce a positive charge on your hair. As a result, your hair is going to be attracted to the hairbrush (and repelled by other strands of hair.)

3. V = IR, so if the resistance of the current increases, and the voltage of the current stays the same, there is as a result, going to be less current.

Best of Regards!

One airplane is approaching an airport from the north at 181 kn/hr. A second airplane approaches from the east at 278 km/hr. Find the rate at which the distance between the planes changes when the southbound plane is 30 km away from the airport and the westbound plane is 15 km from airport.

Answers

Answer:

The value  is  [tex]  \frac{dR}{dt} =  -286.2 \  km/hr [/tex]

Explanation:

From the question we are told that  

   The speed of the airplane from the north is [tex]\frac{dN}{dt}  =  -181 \  km /hr[/tex]

The negative sign is because the direction is towards the south

  The speed of the airplane from the east is  [tex]\frac{dE}{dt}  =  -278 \  km/hr[/tex]

The negative sign is because the direction is towards the west

   The distance of the southbound plane from the airport is  [tex]N  =  30 \  km[/tex]

   The distance of the westbound plane is  [tex]E =  15 \  km[/tex]

Generally the distance between the plane is mathematically represented using Pythagoras theorem  as

    [tex]R^2  = N^2 + E^2[/tex]

Next differentiate implicitly this equation to obtain the rate at which the distance between the planes changes

So

     [tex]2R\frac{dR}{dt} =  2N \frac{dN}{dt} +   2E\frac{dE}{dt}[/tex]

Here

     [tex]R = \sqrt{N^2 + E^2}[/tex]

=>    [tex]R = \sqrt{30^2 + 15^2}[/tex]

=>    [tex]R = \sqrt{30^2 + 15^2}[/tex]

=>    [tex]R =33.54 \ m [/tex]

    [tex]2(33.54) * \frac{dR}{dt} =  2( 30)*(-181)  +   2*15*(-278)[/tex]

=>   [tex] 67.08 * \frac{dR}{dt} =  -19200[/tex]

=>   [tex]  \frac{dR}{dt} =  -286.2 \  km/hr [/tex]

The rate of change of the distance between the planes is 286.23 km/hr.

The given parameters;

speed of the airplane from North, dn/dt = 181 Km/hspeed of the airplane from the East, de/dt = 278 km/hnorth distance, n = 30 kmeast distance, e= 15 km

The distance between the two planes is calculated by applying Pythagoras theorem as shown below;

[tex]d^2 = n^2 + e^2\\\\d = \sqrt{n^2 + e^2} \\\\d = \sqrt{30^2 + 15^2} \\\\d = 33.54 \ km[/tex]

The rate of change of the distance between the planes is calculated as follows;

[tex]d^2 = e^2 + n^2\\\\2\frac{dd}{dt} = 2e\frac{de}{dt} + 2n\frac{dn}{dt} \\\\d\frac{dd}{dt} = e\frac{de}{dt} + n\frac{dn}{dt}\\\\(33.54) \frac{dd}{dt} = (15)(278) \ + (30)(181)\\\\(33.54) \frac{dd}{dt} = 9600\\\\\frac{dd}{dt} = \frac{9600}{33.54} \\\\\frac{dd}{dt} = 286.23 \ km/hr[/tex]

Thus, the rate of change of the distance between the planes is 286.23 km/hr.

Learn more here:https://brainly.com/question/11488002

Other Questions
U2 L5 Modeling Equations With Variables On Both Sides 1) Solve 5x4 = 3x +8. a. Model. b. Perform the step to have variables (circles) on only one side. c. Write the resulting step. d. Perform the step to have the variables (circles) alone on one side. e. Write the resulting step. f. Divide the variables (circles) and numbers (squares) into equal groups. g. Show the value of one group. 2) Solve 4x +7 = 7x8. a. Model. b. Perform the step to have variables (circles) on only one side. c. Write the resulting step. d. Perform the step to have the variables (circles) alone on one side. e. Write the resulting step. f. Divide the variables (circles) and numbers (squares) into equal groups. g. Show the value of one group. at Als pizza they have the expo pizza, which is a 24- inch cheese pizza that costs 17.50. Each topping for the pizza costs 2.35. you order a pizza and get charged 29.25How many toppings were on the pizza?A. 6B. 10C. 3D. 5 Mickey, Mickayla, and Taylor are starting a new business (MMT). To get the business started, Mickey is contributing $200,000 for a 40% ownership interest. Mickayla is contributing a building with a value of $200,000 and a tax basis of $150,000 for a 40% ownership interest, and Taylor is contributing legal services for a 20% ownership interest. Using the research skills you learned in Week 1, access RIA Checkpoint and research what amount of gain/income each owner is required to recognize under each of the following alternative situations? a. MMT is formed as a C corporation. b. MMT is formed as an S corporation. c. MMT is formed as LLC. Which one is correct Can I Have - - - - aspirin,please? 1-Any2-Some Can somebody Awnser these for me please (6-x3)5=45 Please help A digital rain gauge has an outdoor sensor that collects rainfall and transmits data to an indoor display. Assume you produced a graph of all the data collected by the rain gauge over a 24-hour period. a. Would that graph be a discrete graph or a continuous graph? Explain your reasoning. b. b. Describe the general shape of the graph assuming it rained at a rate of 0.1 inch per hour for the entire 24-hour period. c. c. Describe the general shape of the graph assuming it rained 0.1 inch per hour for 6 hours, stopped raining for 6 hours, and then rained 0.2 inch for 12 hours. Plz answer 1st RIGHT gets BRAINLY!!!!! PLUS 10 POINTS!!!! BRAINLIEST If asked what type of person Frida Kahlo was, how would you describe her?2 or more sentances What is community policing? How does it differ from traditional policing? Research shows that many banks are unwittingly training their online customers to take risks with their passwords and other sensitive account information, leaving them more vulnerable to fraud (Yahoo, July 23, 2008). Even web-savvy surfers could find themselves the victims of identity theft because they have been conditioned to ignore potential signs about whether the banking site they are visiting is real or a bogus site served up by hackers. Researchers at the University of Michigan found design flaws in 78% of the 214 U.S. financial institution websites they studied. Required:Is the sample evidence sufficient to conclude that more than three out of four financial institutions that offer online banking facilities are prone to fraud? Use a 5% significance level for the test. What are the military and economic benefits of the Panama Canal ? In a study, participants were asked to watch a video of two teams- one in white outfits and one in black outfits passing a ball to each other. Participants were asked to count the number of times the white team successfully passed the ball. During the video, a woman in a black gorilla suit walked through the middle of the two teams and stopped to thump her chest. After the video, only about half the participants reported that they had noticed the woman in the gorilla suit What phenomenon was this study examining? a. habituation b.just noticeable difference c. bottom-up processing d. inattentional blindness how many triangles in the figure?26252427 Pls Help me. I will mark brainlist. Which of the following is true?1. prokaryotic cells are more complex than eukaryotic cells2. all cells have a cell membrane and a cell wall3. mitochondria convert glucose and oxygen into ATP energy for the cell4. prokaryotic cells do not have DNAPLEASE ANSWER :) you want new jeans and there is a sale this week where they are marked down 30%. what is your final cost if the original price is $50? PLS HELP, WILL REWARD BRAINLIEST!What are some of the unique ways Caribbean islands formed? can yall help me plz 7. What is the water vapor concentration at the tropopause?