How many moles of H are present in 3 moles of carbon trihydride?

Answer:

I ordered the tiles from left to right and top to bottom as the numbers kept increasing. The tiles were also organized based on the color and shape that they were. The tiles with the same color and shape were arranged in the same column.

Explanation:

In the modern periodic table, the elements are listed in order of increasing atomic number and elements having similar chemical properties naturally line up in the same column (group).

Answer:

[tex]\% Fe=11.4\%[/tex]

Explanation:

Hello!

In this case, for the described chemical reaction, we find it is:

[tex]8H^+(aq)+5Fe^{2+}(aq)+MnO_4^-(aq)\rightarrow 5Fe^{3+}(aq)+Mn^{2+}(aq)+4H_2O(l)[/tex]

Because it says that the iron is dissolved in a strong acid which provides addition hydrogen ions to the reaction media. Thus, for the questions attached on the figure we find:

- This a REDOX reaction because we see iron is being oxidized from 2+ to 3+ and manganese reduced from +7 to +2.

- Since it is a redox reaction and the oxidized species is that undergoing an oxidation number increase, we evidence iron goes from +2 to +3, which means iron is the oxidized species.

- In this case, for the used 59.2 mL (0.0592 L) of the 0.2000 M solution of potassium permanganate, we can compute the consumed grams of iron via stoichiometry including the 5:1 mole ratio between them in the chemical reaction:

[tex]m_{Fe^{2+}}=0.0592L*0.2000\frac{molMnO_4^-}{L}*\frac{5molFe^{2+}}{1molMnO_4^-} *\frac{55.85gFe^{2+}}{1molFe^{2+}} \\\\m_{Fe^{2+}}=3.31gFe^{2+}[/tex]

It means that the percent of iron in that sample is:

[tex]\% Fe=\frac{3.31g}{29.00g} *100\%\\\\\% Fe=11.4\%[/tex]

Best regards.

Answer:

A

Explanation:

its A

facts o.o

Nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.

Nuclear power plant is defined as a particular kind of power plant that produces electricity by nuclear fission. Nuclear power plants use the heat generated by nuclear fission to transform water into steam in a controlled environment, which then powers generators to produce electricity.  Low-enriched uranium fuel is used in nuclear power plants to generate electricity through a process known as fission, which involves breaking uranium atoms in a nuclear reactor.

A clean energy source with no emissions is nuclear. It produces energy by fission, which is the splitting of uranium atoms to release energy. Without the toxic consequences that come from burning fossil fuels, electricity is produced using the heat from fission to produce steam, which turns a turbine.

Thus, nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.

To learn more about nuclear power plant, refer to the link below:

https://brainly.com/question/424603

#SPJ2

Answer:

############################

Explanation:

Answer:

Pb²⁺ (aq) + 2I⁻ (aq) → PbI₂ (s)

General Formulas and Concepts:

Explanation:

Step 1: RxN

Pb(NO₃)₂ (aq) + KI (aq) → PbI₂ (s) + KNO₃ (aq)

Step 2: Balance RxN

Pb(NO₃)₂ (aq) + 2KI (aq) → PbI₂ (s) + 2KNO₃ (aq)

Step 3: Ionic Equations

Total Ionic Equation:

Pb²⁺ (aq) + 2NO₃⁻ (aq) + 2K⁺ (aq) + 2I⁻ (aq) → PbI₂ (s) + 2K⁺ (aq) + 2NO₃⁻ (aq)

Cancel out spectator ions.

Net Ionic Equation:

Pb²⁺ (aq) + 2I⁻ (aq) → PbI₂ (s)

Answer:

please brainlist answer

Explanation:

The addition of K 3 Fe(CN) 6 to a solution causes the formation of a deep blue precipitate which indicates that iron(II) ions are present.

The conclusive test for iron(II) ions is the test by the use of potassium hexacyanoferrate III solution.

In qualitative analysis certain reagents are used to test for the presence of certain cations or anions. Those reagents react in a certain way with those reagents. Usually, a positive test may involve a color change, formation of a precipitate or evolution of a gas.

In the case of iron(II) ions, potassium hexacyanoferrate III solution is used in the conclusive qualitative test for the ion. A positive test involves the appearance of a deep blue precipitate.

Learn more: https://brainly.com/question/6955504

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question we have

[tex]density = \frac{690}{750} = \frac{69}{75} = \frac{23}{25} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

Topographical

Explanation:

When it comes to questions such as this one, the thing that could help you the most is a dictionary. A dictionary is an alphabetically arranged listing of words that contains various information about those words, such as their definitions, examples, origin, pronunciation, etc.

The term the given definition refers to is topographical. Topography is the study of the forms and features of land surfaces. The topography of an area refers to its physical properties and terrain or their description (e.g. how they're shown on a map).

Answer:

a. Approximately [tex]1.3\; \rm mL[/tex].

b. Approximately [tex]7.2\; \rm mL[/tex].

Explanation:

The unit of concentration "[tex]\rm M[/tex]" is equivalent to "[tex]\rm mol \cdot L^{-1}[/tex]", which means "moles per liter."

However, the volume of both solutions were given in mililiters [tex]\rm mL[/tex]. Convert these volumes to liters:

[tex]\displaystyle 45\; \rm mL = 45\; \rm mL \times \frac{1\; \rm L}{1000\; \rm mL} = 0.045\; \rm L[/tex].

[tex]\displaystyle 330\; \rm mL = 330\; \rm mL \times \frac{1\; \rm L}{1000\; \rm mL} = 0.330\; \rm L[/tex].

In a solution of volume [tex]V[/tex] where the concentration of a solute is [tex]c[/tex], there would be [tex]c \cdot V[/tex] (moles of) formula units of this solute.

Calculate the number of moles of [tex]\rm NaCl[/tex] formula units in each of the two solutions:

Solution in a.:

[tex]n = c \cdot V = 0.045\; \rm L \times 0.10\; \rm mol \cdot L^{-1} = 0.0045\; \rm mol[/tex].

Solution in b.:

[tex]n = c \cdot V = 0.330\; \rm L \times 0.074\; \rm mol \cdot L^{-1} = 0.02442\; \rm mol[/tex].

What volume of that [tex]3.4\; \rm M[/tex] (same as [tex]3.4 \; \rm mol \cdot L^{-1}[/tex]) [tex]\rm NaCl[/tex] solution would contain that many

For the solution in a.:

[tex]\displaystyle V = \frac{n}{c} = \frac{0.0045\; \rm mol}{3.4\; \rm mol \cdot L^{-1}} \approx 0.0013\; \rm L[/tex].

Convert the unit of that volume to milliliters:

[tex]\displaystyle 0.0013\; \rm L = 0.0013\; \rm L \times \frac{1000\; \rm mL}{1\; \rm L} = 1.3\; \rm mL[/tex].

Similarly, for the solution in b.:

[tex]\displaystyle V = \frac{n}{c} = \frac{0.02442\; \rm mol}{3.4\; \rm mol \cdot L^{-1}} \approx 0.0072\; \rm L[/tex].

Convert the unit of that volume to milliliters:

[tex]\displaystyle 0.0072\; \rm L = 0.0072\; \rm L \times \frac{1000\; \rm mL}{1\; \rm L} = 7.2\; \rm mL[/tex].

Answer:

Warm Water

Explanation:

In warm temperatures, cold-blooded animals are more active and can travel more quickly. This occurs because heat activated reactions provide energy to move muscles. In the absence of heat the animal becomes slow and sluggish. So they are usually inactive and rest when it is cold. As they do not need to feed much, they spend less time looking for food, so this life strategy works for them.

Brainliest?

Answer warm water Explanation:i have the same question

Answer:

1.70 L

Explanation:

From the question given above, the following data were obtained:

Pressure (P) = constant = 1.2 atm

Initial volume (V1) = 1.25 L

Initial temperature (T1) = 293 K

Final temperature (T2) = 398 K

Final volume (V2) =?

Since the pressure is constant, the gas is obeying Charles' law. Thus, we can obtain the new volume (V2) of the gas by applying the Charles' equation as shown below:

V1/T1 = V2/T2

1.25 / 293 = V2 /398

Cross multiply

293 × V2 = 1.25 × 398

293 × V2 = 497.5

Divide both side by 293

V2 = 497.5 / 293

V2 = 1.70 L

Therefore, the new volume of the gas is 1.70 L.

Answer:

0.45 g

Explanation:

Step 1: Given data

Step 2: Calculate the moles of methionine (n)

We will use the following expression.

n = C × V

n = 150 × 10⁻³ mol/L × 20 × 10⁻³ L

n = 3.0 × 10⁻³ mol

Step 3: Calculate the mass of methionine (m)

We will use the following expression.

m = n × M

m = 3.0 × 10⁻³ mol × 149.21 g/mol

m = 0.45 g

Answer:

C

Explanation:

Answer:

I think is A

Explanation:

Hope it helps

The final temperature = 36 °C

The balanced combustion reaction for C₆H₆

2C₆H₆(l)+15O₂(g)⇒ 12CO₂(g)+6H₂O(l)  +6542 kJ

MW C₆H₆ : 78.11 g/mol

mol C₆H₆ :

[tex]\tt \dfrac{8.5}{78.11}=0.109[/tex]

Heat released for 2 mol C₆H₆ =6542 kJ, so for 1 mol

[tex]\tt \dfrac{0.109}{2}\times 6542=356.539~kJ/mol[/tex]

Heat transferred to water :

Q=m.c.ΔT

[tex]\tt 356.539=5.691~kg\times 4.18~kj/kg^oC\times (t_2-21)\\\\t_2-21=15\rightarrow t_2=36^oC[/tex]

Answer:

2-5

Explanation:

I just did it.

The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂

An oxidation number is a number assigned to atoms in molecules to show the general distribution of the electrons.

Oxidation state or number helps us describe the transfer of electrons.

The oxidation number/state is also used to determine the changes that occur in redox reactions.

Overall, the oxidation number of an atom in a molecule is the charge that the atom would have if all polar covalent and ionic bonds resulted in a complete transfer of electrons from the less electronegative atom to the more electronegative one.

Therefore, The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂

Learn more about Oxidation number, here:

https://brainly.com/question/29263066

#SPJ2

Answer:

167 mL.

Explanation:

We'll begin by calculating the number of moles in 45 g of aluminum (Al). This can be obtained as follow:

Mass of Al = 45 g

Molar mass of Al = 27 g/mol

Mole of Al =?

Mole = mass /Molar mass

Mole of Al = 45/27

Mole of Al = 1.67 moles

Next, the balanced equation for the reaction. This is given below:

2Al + 3H2SO4 → Al2(SO4)3 + 3H2

From the balanced equation above,

2 moles of Al reacted with 3 moles of H2SO4.

Next, we shall determine the number of mole of H2SO4 needed to react with 45 g (i.e 1.67 moles) of Al. This can be obtained as:

From the balanced equation above,

2 moles of Al reacted with 3 moles of H2SO4.

Therefore, 1.67 moles of Al will react with = (1.67 × 3)/2 = 2.505 moles of H2SO4.

Thus 2.505 moles of H2SO4 is needed for the reaction.

Next, we shall determine the volume of H2SO4 needed for the reaction. This can be obtained as follow:

Molarity of H2SO4 = 15.0 M

Mole of H2SO4 = 2.505 moles

Volume =?

Molarity = mole /Volume

15 = 2.505 / volume

Cross multiply

15 × volume = 2.505

Divide both side by 15

Volume = 2.505/15

Volume = 0.167 L

Finally, we shall convert 0.167 L to mL. This can be obtained as follow:

1 L = 1000 mL

Therefore,

0.167 L = 0.167 L × 1000 mL / 1 L

0.167 L = 167 mL

Thus, 0.167 L is equivalent to 167 mL.

Therefore, 167 mL H2SO4 is needed for the reaction.

Answer:

Trioxocarbonate (iv) are salts derived from trioxocarbonate (iv) acid when it reacts with metals and metallic oxides. All trioxocarbonate (iv) salts of Sodium (Na), Potassium (K) and Ammonium(NH4+) are soluble while all others are insoluble.

Answer:

B.

Explanation:

i think its B

This quantity = 0.298 nanograms(ng)

Mass is one of the principal quantities, which is related to the matter in the object

The main mass unit consists of 7 units of other than other units of mass such as quintals, tons, pounds, ounces:

Kilogram, kg

Hectogram, hg

Decagram, dag

gram, g

Desigram, with

centigram, cg

milligram, mg

Each unit descends then multiplied by 10, and if one unit increases then divided by 10

Conversion of other mass units:

10⁻³ g ⇒mg-milligrams

10³ g ⇒kg-kilograms

10⁻⁶ g ⇒µg-micrograms (mcg)

10⁶ g ⇒Mg-megagrams (tons)

10⁻⁹ g ⇒ng-nanograms

10⁹ g ⇒Gg-gigagram

10⁻¹² g ⇒pg-pikogram

2.98 x 10⁻¹⁰ g to nanograms(ng)

[tex]\tt 2.98\times 10^{-10}\times 10^9=0.298~ng[/tex]

Answer:

A

Explanation:

Answer:

d

Explanation:

.

.

[tex]

\bold{\huge{\fbox{\color{red}{answer}}}}[/tex]

b competition .

hope it helps u

Answer:

Mass is conserverd

Explanation:

Any chemical reaction must follow the law of conservation of mass. Meaning that mass cannot be created nor destroyed. Since all chemical reactions must follow this law, no matter what reaction happens, mass is conserved.

Answer:

D. Thermal energy increases as the atoms and molecules in a system move more.

Explanation:

Thermal energy is a form of kinetic energy possessed by molecules of a system. The measure of this kinetic energy in an atom is called heat.

The average kinetic energy of a system is the temperature.

Answer:

its hydroxy and alkoxy

Explanation:

ester is mainly formed by substitution reaction of carboxylic acid and alcohol

The esters are generally produced as a result of the reaction called esterification. They are generally derived from carboxylic acids. The functional group present in ester is OR. The correct option is E.

The chemical compounds which are derived from an acid either organic or inorganic in which at least -OH ( hydroxyl group ) is replaced by an -O- alkyl group ( alkoxy ) group are called esters. Generally an ester can be represented as R - C = O - OR.

The chemical compounds that are formed by the reaction of an acid and alcohol by losing water molecule can be defined as the esters.

To know more about esters, visit;

https://brainly.com/question/30404138

#SPJ7

Answer: pH = 10

Explanation: First solve for pOH using the equation pOH=-log[OH-] = 4

Then plug the pOH in the equation, pH + pOH =14

then solve for pH. pH =14 - 4 = 10

Answer:

pH= 10

Explanation:

The pH really depends on what your solution is.

For example, if we are assuming that the concentration of 1.0M is of a strong monoprotic acid e.g. HCl, it would be safe to assume that almost all of the 1.0M acid has dissociated into its H+ ion, and its conjugate base. Thus, the pH can be determined by taking the negative log(to base 10), of the concentration.

Inversely, if the solution is of a strong base, the pOH value would be found, assuming the steps above. This pOH value can be used to infer a pH from the formula - pH + pOH = 14 then 14 - 4 = 10

Finally, come the weak acids/bases, which follow the rules above, except as they only partially dissociate, one needs its equilibrium constant to determine its extent of ionisation, to substitute into the negative log. This also is the case for the second, and higher order dissociation of polyprotic acids e.g. H2SO4.the answer is 10

Hope it helps