how is a beach ball and infrared energy alike

Answer:

We can use Newton's second law of motion to calculate the net force required to accelerate an object. The equation is:

F = ma

Where:

F = net force (N)

m = mass of the object (kg)

a = acceleration (m/s^2)

Given that the mass of the loaded Boeing 747 is 200,000 kg and the desired acceleration is 3.5 m/s^2. We can substitute these values into the equation:

F = 200,000 kg * 3.5 m/s^2 = 700,000 N

Therefore, the net force required to give the plane an acceleration of 3.5 m/s^2 is 700,000 N. This is a significant force, which is required to overcome the inertia of the massive object, and to move it down the runway.

The building's height is 143.8 m in SI units, and the rock strikes the ground 6.0 seconds after just missing the building's edgr as it slides downhill.

The kinematic equations of motion that explain the vertical motion of the rock may be used to calculate the height of the construction. We may use the following equations because the rock is launched vertically upward:

Y equals vi*t plus (1/2)at2 vf

^2 = vi^2 + 2ay

The maximum height will be determined first:

y = 0 * 1.75 + (1/2)(-9.8) y = vi*t + (1/2)at2 (1.75)

^2 \sy = 15.0625 m

We shall now determine the ultimate velocity:

vf = -24.3 m/s when vf = vi + 2ay when vf = 0 + 2*(-9.8)*15.0625

Using the final velocity and duration, we can now determine the height of the building:

y=vit+(1/2)at2 y=-24.36+(1/2)(-9.8) (6)

^2 \sy = -143.8 m

The metric system that serves as the industry standard for measurements is called the International System of Units (SI).

learn more about SI Unit here:

https://brainly.com/question/12750330

#SPJ4

Because the sun is exactly above the objects at midday and the sun rays drop vertically just on body, the shadow at noon is much shorter than shadows with in morning or the evening.

To create a shadow, two things are required. Light is the first. The second is a light-obstructing object.

Whenever the sun is higher in the sky, less light is obstructed. As a result, shadows are shorter.

To know more about the shadows, here

https://brainly.com/question/12702631

#SPJ1

The speed of the golf ball just after impact will be 65.22 m/s when the head of a 200-g golf club is traveling at 55 m/s just before it strikes a 46-g golf ball at rest on a tee. after the collision, the club head travels (in the same direction) at 40 m/s.

Initially, head just before it strikes

m1 = 200 g, u1 = 55 m/s

mass of ball m2 = 46 g at rest u2 = 0

After the collision,

head speed v1 = 40 m/s

find: speed of golf ball, v2

Now, applying the Conservation of Linear Momentum

m1u1 + m2u2 = m1v1 + m2v2 {Both traveling in same direction}

200(55) + 0 = 200(40) + 46(v2)

or v2 = 200 x 15/46

or v2 = 65.22 m/s

Therefore, the speed of the golf ball just after impact will be 65.22 m/s when the head of a 200-g golf club is traveling at 55 m/s just before it strikes a 46-g golf ball at rest on a tee. after the collision, the club head travels (in the same direction) at 40 m/s.

To learn more about the Conservation of Linear Momentum:

https://brainly.com/question/30270353

#SPJ4

The eardrum is the thin piece of tissue which is present between the outer and middle ear. This is responsible for the hearing capacity of an individual.

The eardrum, middle ear, cochlea, and pinna are important parts of the Ear. The eardrum is a thin piece of tissue which separates the outer and middle ear. Damage to this eardrum may harm hearing capacity. Mastoiditis is an infection of the bony air cells which are present in the mastoid bone, that is located just behind the ear.

Middle ear has three tiny bones including the malleus, incus and stapes.  These bones transfer sound vibrations from eardrum to the inner ear.

The cochlea is a hollow, spiral-shaped bone which is found in the inner ear that plays a key role in the sense of hearing and it also participates in the process of auditory transduction. Sound waves are transduced into electrical impulses which the brain can interpret as individual frequencies of sound.

The auricle or pinna is the visible portion of the outer ear. It is responsible for collecting the sound waves and channels them into the ear canal, where the sound is amplified.

Learn more about Ear here:

https://brainly.com/question/29255597

#SPJ1

We can find direction by electric field diagram and magnitude remain the same despite of a change in positions.

When a proton is placed at point A and an electron is placed at point B, the direction of the electric force F is determined by the electric field line diagram. The electric force between the two charges is a vector force, which means it has both a magnitude (strength) and a direction.

The magnitude of the electric force F between a proton and an electron is determined by Coulomb's Law, which states that the magnitude of the force between two charges is in direction proportion to charges' product and in inverse proportion with their distance squared.

to the product of the two charges and inversely proportional to the square of the distance between them. Thus, the magnitude of the electric force F between the charges is independent of the direction, so the magnitudes of the electric force F between a proton and an electron, regardless of their positions, will always be the same.

The direction of the electric force F, however, is determined by the electric field line diagram. In the diagram, the electric force F is directed away from the positive charge (the proton) and toward the negative charge (the electron). Therefore, the electric force F will be directed away from point A and toward point B, making the angle relative to the +x axis clockwise, with a positive angle.

In summary, the magnitude of the electric force F between a proton and an electron will remain the same regardless of the positions of the particles, while the direction of the electric force F will be determined by the electric field line diagram, with the angle relative to the +x axis clockwise, with a positive angle.

Learn more about electric field here:

https://brainly.com/question/10235693

#SPJ4

The textbook-earth system has a gravitational potential energy of 98 J relative to the floor.

Gravitational energy, also known as gravitational potential energy, is the potential energy possessed by a massive object in relation to another massive object as a result of gravity. It is the potential energy associated with the gravitational field that is released when two objects collide. Gravitational potential energy is the energy that an object possesses or acquires as a result of a change in its position when it is in a gravitational field. In layman's terms, gravitational potential energy is energy that is related to gravitational force or gravity.

Here,

The energy possessed by a body due to its placement in gravitational field. It is given by:

G.P.E. = m g h

m is the mass of the object, g is the acceleration due to gravity and h is the height.

mass of the book, m = 8.0 kg

height of the desk on which book is kept, h = 1.25 m

acceleration due to gravity, g = 9.8 m/s²

G.P.E = 8.0 kg × 9.8 m/s² × 1.25 m = 98 J

The gravitational potential energy of the textbook-earth system relative to the floor is 98 J.

To know more about gravitational potential energy,

https://brainly.com/question/12132690

#SPJ4

The smallest center-to-center separation dp between proton and nucleus when the proton momentarily stops is 4.17 x 10^-14m and the ratio da/dp is 2:1.

Given the kinetic energy of proton (KE) = 2.80MeV

The charge if proton (q1) = 1.6 x 10^-19C

The proton hits a lead nucleus. So, the atomic number of lead = 82

The charge on lead nucleus (q2) = 82e = 82 x 1.6 x 10^-19

The Coulomb force is the sole force that exists between the proton and the nucleus because the proton cannot enter the nucleus.

We know that KE = q1V where V is the potential difference

We know that from coulombs law V = kq2/r where r is separation distance

Then r = dp such that dp = kq1/V = kqxq2/KE = kq1q2/KE

dp = (8.9 x 10^9)(1e)(82e)/2.8 MeV

dp = 1167.68 x 10^-10/2.8 x 10^6 = 4.17 x 10^-14m

The the smallest center-to-center separation dp between proton and nucleus is 4.17 x 10^-14m

If the proton was replaced by two alpha particle charge (q1) = 2e

The separation between alpha particle and nucleus = da

da = (8.9 x 10^9)(2e)(82e)/2.8x10^6eV = 2335.36x10^-16/2.8 = 8.34x10^-14m

Hence the required ratio of da/dp = 8.34x10^-14m/4.17 x 10^-14m = 2:1

To learn more about kinetic energy click here https://brainly.com/question/26472013

#SPJ4

The magnitude of an electron's electric force in a uniform electric field of strength 2360 N/C pointing due east is 3,781 x 10⁻¹⁶ N (positive)

Electric force is defined as the repulsive or attractive interaction between two charged bodies. Newton's laws of motion describe the impact and effects of any force on the given body.

The formula for electric force:

F = E x q

Where,

F = electric force (N)

E = electric field (N/C)

q = charge (Coulomb)

An electron is also negatively charged, with a charge of 1.60217662 10⁻¹⁹ C.

Hence, the magnitude of an electron's electric force in a uniform electric field of strength 2360 N/C pointing due east is:

F = E x q

= (2360 N/C) x (1.60217662 x 10⁻¹⁹ C)

= 3,781 x 10⁻¹⁶ N

The direction is positive.

Learn more about electric force here: https://brainly.com/question/25923373

#SPJ4

The primary amps on the 69kv bus would be 14.835 amps.

To determine the primary amps on the 69kv bus in this scenario, you would need to use the CT ratio of 2000:5. The CT ratio is used to convert the current on the secondary side of the CT to the current on the primary side. In this case, the secondary current is 2.97 amps, so you would multiply that by the ratio of 2000:5 (2000/5 = 400) to get the primary current.

2.97 amps x 400 = 14.835 amps.

Therefore the primary current on the 69kv bus is 14.835 amps.

It's important to note that this calculation assumes that the CT is functioning correctly and that the primary and secondary circuits are properly connected.

To learn more about circuit visit: https://brainly.com/question/2969220

#SPJ4

A limited access zone is an area next to a masonry wall that is being built and is clearly marked to restrict access by workers.

The restricted area must extend the entire length of the wall and have a height equivalent to the height of the proposed wall plus four feet. On the un-scaffolded side of the wall, a limited access zone must be formed. For a maximum wall height of 10.668 meters, the load-bearing masonry wall should be at least 304.8 mm (1 foot) thick (35 ft.). Additionally, for every additional 10.668 meters, the brick wall's thickness must be increased by 101.6 mm (4 inches) (35 ft).

To learn more about height click here https://brainly.com/question/29572656

#SPJ4

The maximum acceleration will be 4.9 m/s², if the truck has four wheels and the static friction coefficient is 1.

Let the mass of the truck, M

Let the force require to overcome the static friction is F.

Let the acceleration in the forward direction is a.

Coefficient of static friction, μ = 1

4 wheels(2 rear and 2 front wheels) will share the equal force of friction resistance. Force of friction will be equal to the forward force applied by the truck.

That will be F₁/2 = F₂/2 = F

F₁/2 = F₂/2 = μMg/2 = F

μMg/2 = Ma

a = μg/2

a = (1×9.81)/2

a = 4.9 m/s²

--The give question is incomplete, the complete question is:

"The truck has four-wheel drive, and the cabinet is wooden, what is it's maximum acceleration (in m/s2), if the coefficient of static friction is 1?"

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

The air temperature where a tuning fork has a frequency of 534 hz and a wavelength of 64 cm is calculated to be 16.63 °C.

Frequency of the tuning fork = 534 hz

Wavelength = 64 cm = 64/100 m = 0.64 m

Temperature = ?

We know the relation between speed of air and temperature as,

v = 331 √(1+ T/273) ----(1)

where, T is in Celsius

The relation between speed, wavelength and frequency is said to be,

v = frequency × wavelength = 534 × 0.64 = 341.76 m/s ----(2)

Placing (2) in (1),

341.76 = 331 √(1+ T/273)

1.03 = √(1+ T/273)

1+ T/273 = 1.0609

T/273 = 0.0609

T = 16.63 °C

To know more about tuning fork:

https://brainly.com/question/6332644

#SPJ4

The total voltage drop across the 1 awg aluminum conductors is 0.58 volts, if the current carried by the conductor is 36 Ampere.

Current carrying by the conductor, I = 36 A

length of the wire, l = 100 ft.

According to the ampacity Chart For AWG Aluminum Wires, The resistance of the 1 awg aluminum wire is 0.161Ω/1000 ft

So the resistance of the 100 ft wire would be, R = (0.161 × 100)/1000

R = 0.0161 Ω

So the total voltage drop will be, V = IR

V = 36 × 0.0161

V = 0.58 volt

So the total voltage drop across the conductor will be 0.58 volt.

--The given question is incomplete, the complete question is:

"a 2-wire circuit supplies a 36a load that's located 100 ft from the panelboard. the load is wired with 1 awg aluminum conductors in pvc conduit. What will be the total potential drop across the circuit conductors?"

To know more about voltage drop, here

https://brainly.com/question/13094809

#SPJ4

Yes, it does follow that the proton's velocity is parallel to the electric field.

This is because when a particle moves in a constant electric field, it will experience a force equal to its charge multiplied by the magnitude of the electric field. This force will cause the particle to accelerate in the direction of the electric field, resulting in a velocity that is parallel to the electric field.

Additionally, the particle's acceleration is proportional to the electric field's magnitude, so if the electric field is increased, the particle will accelerate faster and its velocity will become more parallel to the electric field. This is why it is important to ensure that the electric field is constant when conducting experiments involving particles in an electric field.

Learn more about the electric field:

https://brainly.com/question/28027633

#SPJ4

Atomic properties, such as the number of protons and neutrons in the nucleus of an atom, determine an element's atomic number and its ability to undergo nuclear reactions.

What's the relationship between Atomic properties and nuclear power generation?

In the process of nuclear power generation, atoms of a specific element, such as uranium or plutonium, are induced to undergo nuclear fission, releasing a large amount of energy in the form of heat.

This heat is then used to generate electricity in a nuclear power plant. Thus, the atomic properties of the fuel used in a nuclear power plant play a critical role in the generation of nuclear power.

To learn more about nuclear reactions, visit: https://brainly.com/question/984564

#SPJ1

Earth suddenly has 3 times as much mass ... weight is 3 times as much

You're suddenly 4 times as far from the center ... weight = (1/4²) = 1/16

New weight = (original weight) x (3/16)

New weight = (750 N) x (3/16)

New weight = 140.6 N

Main sequence M star has the longest lifetime. Because the main sequence is the stage of a star's life that lasts the longest, more than 90% of the stars in the cosmos are main sequence stars.

A star ten times as big as the sun will last on the main sequence for only 20 million years. The sun will last approximately 10 billion years. Red dwarfs can live 80 to 100 billion years, which is much longer than the universe's age of 13.8 billion years and half the mass of the sun. A star with only half the mass of the Sun can stay on the main sequence for 80 billion years. Our stellar companions range from nebula to protostar, through the main sequence to red giant, and finally finish as white dwarfs, neutron stars, or black holes.

To learn more about stars click here https://brainly.com/question/2193636

#SPJ4

The electric potential is 27.2V

Electric potential is given by equation: V = kq/r

where,

k =  Coulomb's constant = 9 ×10⁹ N m²/C²

r =  Radius = 0.53×10⁻¹⁰ m

Putting these values in above equation we get:

V = (9 ×10⁹)(1.6 × 10⁻¹⁹)/( 0.53×10⁻¹⁰) = 27.2 V

So the electric potential is 27.2V

To know more about electric charges visit:

https://brainly.com/question/14979767

#SPJ4

Thermal energy absorption or release can cause a change in the state of matter.

To learn more about thermal energy refer to:

https://brainly.com/question/19666326

#SPJ1

The charge on each of the particles must be 4.33 × 10⁻⁴ C, if the force between them is 148 N, and the distance between them 0.378 m.

The force between the particles is, F = 148 N

Permittivity of the free space, ε₀ = 8.8 × 10⁻¹² Far/meter

Distance between the particles, r = 0.378 m

Let the charge on each particles is equal = q

Dielectric constant of water, k = 80

Permittivity of the water, ε = kε₀ = 80 × 8.8 × 10⁻¹²

ε = 704 × 10⁻¹²

The force between two charge, F = (1/(4πε))(q²/r²)

148 = q²/(4×π×704 × 10⁻¹²×0.378²)

q² = 148 × 4×π×704 × 10⁻¹²×0.378²

q² = 1.87 × 10⁻⁷

q = 4.33 × 10⁻⁴ C

To know more about charge, here

https://brainly.com/question/3412043

#SPJ4

Cleavage is the tendency of a mineral to break along smooth flat surfaces when struck. It is a property that reflects the crystal structure and is an indication of the mineral's internal atomic arrangement. A mineral with cleavage will break along specific planes, often yielding flat and smooth surfaces.

Cleavage is a property of minerals that refers to the way they split or break along certain planes. Minerals that exhibit cleavage have a tendency to break along specific, smooth and flat surfaces. This property is caused by the internal arrangement of atoms in the mineral's crystal structure. Minerals that typically exhibit cleavage include micas, halite, calcite, fluorite, quartz, and feldspar. Minerals that exhibit good cleavage can be easily separated into thin sheets or plates, making them useful for a variety of industrial and commercial applications.

To know more about Minerals visit: https://brainly.com/question/13770820

#SPJ4

Cleavage is a property of a mineral that indicates its tendency to break along certain flat surfaces, rather than in a random pattern.

Bond cleavage, also known as bond fission, is the splitting of chemical bonds in chemistry. When a molecule is split into two or more pieces, this is commonly referred to as dissociation. According to how the bond is broken, there are generally two types of bond cleavage: homolytic and heterolytic.

In chemistry, cleavage essentially refers to the bond breaking. There are two types of cleavage: (1) An equal distribution of electrons between the two atoms causes a link between them to cleave. (2) In this form of connection, the most electronegative atom receives the bond's electron.

The presence of cleavage is an indicator of the arrangement of atoms in the crystal structure of the mineral, and the direction of the cleavage surfaces is determined by the crystal lattice. The term "cleavage" is often used interchangeably with the term "fracture," although fracture refers to any type of break in the mineral, regardless of whether it follows a specific pattern or not.

To know more about crystal visit:

https://brainly.com/question/816377

#SPJ4

Answer:

The electric field can be found using Coulomb's law, which states that the force on a point charge due to a uniform distribution of charges is given by the equation:

E = k * Q / r^2

where E is the electric field, k is Coulomb's constant, Q is the total charge, and r is the distance from the point charge to the center of the distribution of charges.

In this problem, we are given that the rod is uniformly charged and has a total charge of -19.4 µC. We are also told that the distance from the point to the center of the rod is 21.8888 cm. To find the electric field, we can substitute these values into Coulomb's law:

E = (8.98755 * 10^9 Nm^2/C^2) * (-19.4 * 10^-6 C) / (21.8888 cm)^2

converting cm to m to get the units of N/C

E = (8.98755 * 10^9 Nm^2/C^2) * (-19.4 * 10^-6 C) / (0.218888 m)^2

E = -5.54717 N/C

The magnitude of the electric field along the axis of the rod at a point 21.8888 cm from the center of the rod is -5.54717 N/C.

Note that the negative sign on the answer indicates that the electric field points in the opposite direction of the distance vector.

The size of the image is determined by the distance between the object and the mirror (object distance) and the distance between the mirror and the screen (image distance).

Using the formula for image distance (1/f = 1/object distance + 1/image distance), we can find the focal length of the mirror:

1/f = 1/object distance + 1/image distance (twice the object size)

1/f = 1/object distance + 2

1/f = 1/object distance + 1/image distance (three times the object size)

1/f = 1/object distance + 3

We know that the image distance (the distance from the mirror to the screen) is 75 cm in both scenarios, so we can set up the equations using that information:

1/f = 1/object distance + 2 (twice the object size)

75 = 2 * object distance + f

1/f = 1/object distance + 3 (three times the object size)

75 = 3 * object distance + f

Solving for object distance in the first equation:

object distance = (75 - f) / 2

Substituting that into the second equation:

75 = 3 * ((75 - f) / 2) + f

Simplifying and solving for f:

75 = (225 - 3f) / 2 + f

150 = 225 - 3f

3f = 75

f = 25 cm

So the focal length of the mirror is 25 cm.

To find the distance the object is moved, we can use the equation for object distance:

object distance = (75 - f) / 2

object distance = (75 - 25) / 2

object distance = 25 cm

So, the object is moved 25 cm in the process.

To learn more about concave mirror:

https://brainly.com/question/26505785

#SPJ4

The electric force e = 1.6*10^-19 C) for an electron is placed at a point where the electric field (due to other charges) is where is a constant.

The electron would be an elementary particle with either an elementary electric charge of -1. Electrons are the initial generation of both the lepton particle family as well as are widely regarded as elementary particles due to the lack of known components as well as substructure.

The electric force on the electron is equal to the electric field multiplied by the charge of the electron:

F = E*e = (n/c)*1.6*10^-19 C = 1.6*10^-19*n N

The nucleus and electrons are drawn to one another by the electric force. The void created by a positive or negative charge is referred to as an electric field since it generates a field there.

To know more about force here

https://brainly.com/question/13191643

#SPJ4

The acceleration the pilot is experiencing when the plane is at x will depend upon the situation and the specific events or maneuvers that are taking place.

If the plane is traveling at a constant rate of 200 m/s and no other forces are acting on it, the pilot won't experience any acceleration. Constant velocity means that there is no acceleration.

If in this case, the plane is in a turn, climbing or descending, the pilot will experience an acceleration due to the centripetal force acting on the pilot in the direction towards the center of the turn or the force due to gravity acting on the pilot in the case of climbing or descending.

Without more information about the situation, it is not possible to determine the acceleration the pilot is experiencing.

To learn more about acceleration:

https://brainly.com/question/605631

#SPJ4

Energy is stored by the electric field between two square plates, 7.9 cm on a side, separated by a 2.1- mm is 0.18MV/m.

The electric field stored between two square plates, 7.9 cm on a side, separated by a 2.1-mm air gap is calculated by using the equation

E=V/d, where E is the electric field, V is the voltage, and d is the distance between the plates. The voltage is equal to the charge on the plates divided by the area of the plates,

V=Q/A.

Therefore, the electric field is equal to 14 nC/(7.9 cm)².

The electric field stored is 0.18 MV/m. This energy is expressed using two significant figures and includes the appropriate units.

Learn more about energy:

https://brainly.com/question/24772394

#SPJ4

Unit of measurement used to describe extraordinary large distances, such as distance of other stars from our own is called light year.

The unit of measurement most commonly used to describe large distances in astronomy is light-year. A light-year is the distance that light travels in one year, and is equivalent to about 5.88 trillion miles (9.46 trillion kilometers).

This unit is used because it is the most convenient way to express large distances in space, such as the distance between stars, galaxies and other celestial objects. For example, our nearest star system, Alpha Centauri, is around 4.37 light-years away, and Andromeda galaxy, closest galaxy to our Milky way, is about 2.5 million light-years away.

To know more about light years, refer

https://brainly.com/question/76984

#SPJ4

Most of the carbon, nitrogen, and oxygen in the universe were made in stars through nuclear fusion. Specifically, carbon and oxygen are produced in the later stages of a star's life through the fusion of helium atoms, and nitrogen is produced through the fusion of helium and carbon atoms. This process is known as nucleosynthesis.

Nucleosynthesis is the process by which new atomic nuclei are created. This can happen through a variety of mechanisms, including nuclear fusion and nuclear fission.

The most common type of nucleosynthesis is stellar nucleosynthesis, which occurs in stars. Through the fusion of lighter elements, heavier elements are formed. The fusion of hydrogen nuclei (protons) produces helium, and this process releases a large amount of energy in the form of light and heat. More massive stars can fuse elements up to iron.

Big Bang nucleosynthesis is another important type of nucleosynthesis, which occurred a few minutes after the Big Bang. During this process, protons and neutrons came together to form the nuclei of the lightest elements, such as hydrogen, helium, and lithium.

Another form of nucleosynthesis is explosive nucleosynthesis, which can happen in supernovae. When a massive star exhausts its nuclear fuel and dies, the outer layers of the star are violently expelled and can fuse into heavier elements.

Overall, nucleosynthesis is responsible for the creation of all elements heavier than hydrogen and helium, which were formed during the Big Bang.

To know more about nuclear fission visit: https://brainly.com/question/913303

#SPJ4